summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27mainboard/google/bolt: remove unobtainable mainboardAaron Durbin
The bolt board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15901 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27soc/nvidia/tegra124: remove cache_policiy optionAaron Durbin
All mainboards (nyans) utilizing the cache_policy option has it set to DCACHE_WRITETHROUGH. This option is for setting the framebuffer's cache attribute. However, this option is reliant on an architecture-specific enumeration. Just remove the option and use DCACHE_WRITETHROUGH across the board. If someone wants to reconfigure it at a later date one can introduce a non-architecture specific option. Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-26google/oak: dsi: set mipi pin driving control onMartin Roth
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown(floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeat setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui The original commit in the cros repo combined the chipset and mainboard code changes. This has been split for the push to coreboot.org Change-Id: I733bdd115950b71493856220414ac0dd75d28122 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gale: Fix board ID and GPIO config.Kan Yan
Fix the board ID handling. Recovery switch and WP status GPIO has been reassigned in board rev3. Configure related GPIOs based on Board ID. BUG=chrome-os-partner:55320 TEST=Verified GPIO assignment for Rev.1 board. BRANCH=None Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/361393 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15809 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
1. Remove unused functions/structures. 2. Add checks for NULL return values. 3. Change prefixes to vb2 instead of vboot for functions used internally within vboot2/ 4. Get rid of vboot_handoff.h file and move the structure definition to vboot_common.h 5. Rename all functions using handoff structure to have prefix vboot_handoff_*. All the handoff functions can be run _only_ after cbmem is online. 6. Organize vboot_common.h content according to different functionalities. BUG=chrome-os-partner:55431 Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25skylake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15822 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25google/jecht: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash size accordingly for jecht. BUG=chromium:622501,chromium:628494 BRANCH=none TEST=emerge-jecht chromeos-bootimage CQ-DEPEND=CL:361380 Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818 Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361370 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15806 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-24google/reef: Enable PS/2 keyboard driver by defaultDuncan Laurie
This device has a built-in keyboard that should be enabled by default or it will not work in firmware. This was tested to ensure that TAB (display info) and Ctrl+D (enter developer mode) are functional at the Chrome OS recovery screen. BUG=chrome-os-partner:55549 Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15782 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-22google/reef: Update gpio config for audioSathyanarayana Nujella
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15433 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22soc/intel/apollolake: clarify meaning of LPDDR4 density meaningAaron Durbin
The 'dram density' is a misnomer because the memory initialization code treats that input parameter as a per rank density. Therefore, update the variables to further clarify how it's actually being used. BUG=chrome-os-partner:55446 Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15773 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-22mainboard/google/reef: indicate dual rank LPDDR4 skusAaron Durbin
The 16Gb devices use two ranks per channel within the DRAM module. However, the density settings are really on a per rank basis so indicate dual rank with a device density of 8Gb. BUG=chrome-os-partner:55446 Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15772 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-21mainboard/google/reef: handle eMMC power signal polarity changeAaron Durbin
The EVT board uses an active high power control signal while the previous board used an active low signal. Update the tables to reflect the differences. BUG=chrome-os-partner:55470 Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21mainboard/google/reef: reverse the memory config bitsAaron Durbin
I mistakenly assumed the order of the bits matched how one would assign values as they wrote them msb .. lsb. However, the gpio lib doesn't do that. Correct the order so that values are read out correctly. BUG=chrome-os-partner:54949t Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15753 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-20google/reef: Add wake signal for trackpadFurquan Shaikh
EVT has a wake signal for track pad which is routed to GP_15. BUG=chrome-os-partner:54960 Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15723 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-19mainboard/google/reef: explicitly set shipping Chrome OS optionsAaron Durbin
The Chrome OS options that will be shipped on this platform were being set in the chromium repo with an external config file. Set the options in the mainboard Kconfig file so there's no discrepancy as to what will be used. Change-Id: I05f0d1245611c16f54273728519a08e6edff3429 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-18google/oak & elm: initialize touchscreen reset gpioYH Huang
In order to save power in S3, we remove reset gpio setting in kernel. We still need to initialize touchscreen ic. Do it by pulling low reset gpio for 500us and then pulling high in firmware. BRANCH=none BUG=chrome-os-partner:55170 TEST=build on elm. Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6 Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360312 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-on: https://review.coreboot.org/15719 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-15soc/intel/apollolake: Consolidate ISH enablingAndrey Petrov
Since the Integrated Sensor Hub can be disabled through devicetree.cb as a PCI device, there is no need for a separate register variable. Remove handling the register and update mainboards' devicetrees. Also keep ISH disabled on both Reef and Amenia. Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15710 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15google/reef: Add wake-up from lid openShaunak Saha
This patch adds support to wake up from S3 on lidopen. mainboard.asl has the _PRW defined for the wakeup support in S3. BUG = chrome-os-partner:53992 TEST = Reef board wakes up from S3 on lidopen. Change-Id: Ic3bae26cea0642f98d938b3523d08f5902a1f4b5 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15mainboards/skylake: use common Chrome EC SMI helpersAaron Durbin
Reduce duplicate code by using the Chrome EC SMI helper functions. BUG=chrome-os-partner:54977 Change-Id: Ie83e93db514aa0e12e71d371d7afab34a70797fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15689 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-15mainboards/apollolake: use common Chrome EC SMI helpersAaron Durbin
Reduce duplicate code by using the Chrome EC SMI helper functions. BUG=chrome-os-partner:54977 Change-Id: Iba2ca7185ad7f0566858ce99f5ad8325ecc243cf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15687 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2016-07-15mainboards: remove direct acpi_slp_type usageAaron Durbin
Use the acpi_is_wakeup_s3() API instead of comparing a raw value to a global variable. This allows for easier refactoring. Change-Id: I2813b5d275cbe700be713272e3a88fdb5759db99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15690 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2016-07-15mainboards: align on using ACPI_Sx definitionsAaron Durbin
The mainboard_smi_sleep() function takes ACPI sleep values of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure that whatever hardware PM1 control register values are used the interface to the mainboard is the same. Move all the SMI handlers in the mainboard directory to not open code the literal values 3 and 5 for ACPI_S3 and ACPI_S5. There were a few notable exceptions where the code was attempting to use the hardware values and not the common translated values. The few users of SLEEP_STATE_X were updated to align with ACPI_SX as those defines are already equal. The removal of SLEEP_STATE_X defines is forthcoming in a subsequent patch. BUG=chrome-os-partner:54977 Change-Id: I76592c9107778cce5995e5af764760453f54dc50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15664 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15Google Mainboards: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images will be moved to CBFS from GBB. This patch adjusts the flash map accordingly for rambi, samus, peppy, parrot, falco, panther, auron, and strago. BUG=chromium:622501 BRANCH=tot TEST=emerge-{samus,falco} chromeos-bootimage CQ-DEPEND=CL:354710,CL:355100 Change-Id: I6b59d0fd4cc7929f0de5317650faf17c269c4178 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 201a82311ba539b9b02d546ba331ff5bf73e0edf Original-Change-Id: I0b82285186540aa27757e312e7bd02957f9962ec Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/355040 Reviewed-on: https://review.coreboot.org/15658 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-14google/reef: Add mainboard SMI handlerShaunak Saha
This patch adds a mainboard SMI handler file which has functions to set proper Wake mask before going to sleep so that system can wake up on lidopen, key press etc. Also SCI mask is set on boot which will enable timely update of battery UI on charger connect/disconnect. BUG = chrome-os-partner:53992 TEST = Reef Platform wakes from S3 on lidopen, key press and also sysfs entry for AC is updated on charger connect/disconnect. Change-Id: I8c087994b48223b253dcf1cbb3ed3c3a0f366e36 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14google/reef: Enable touchscreen in ACPIFurquan Shaikh
Add support for ELAN touchscreen on I2C3. Change-Id: Id8b07a3a3fd4beca0d7ce804ba8d6859275c70d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15499 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-13gru: Enable TPM2Vadim Bendebury
Gru and derivative boards use TPM2 to support Chrome OS verified boot. BRANCH=none BUG=chrome-os-partner:50645 TEST=re-built Kevin firmware, verified that TPM2 support over SPI is enabled, and that with appropriate vboot and depthcharge patches applied the device can boot into chrome os properly verifying RW firmware and kernel key indices. Change-Id: Id14a51cea49517bd2cc090ba05d71385aad5b54c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 60e229d93d7e219e261b851f654e459eb2cf4f41 Original-Change-Id: Ic6f3c15aa23e4972bf175b2629728a338c45e44c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354781 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13oak/gru: Fix derivative KconfigsJulius Werner
Add a few missing Kconfig defaults for derivatives of the Oak and Gru baseboards. Also group all Kconfigs that must change for derivatives together for easier updating. BRANCH=None BUG=None TEST=None Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357922 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15605 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13mainboard/google/reef: use new gpio interrupt macrosAaron Durbin
Utilize the new interrupt macros in order to specify correct polarity of the gpio interupts. Some of the interrupts were working by catching the opposite edge of the asserted interrupt. BUG=chrome-os-partner:54977 Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15645 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-12google/reef: Add GPE routing settingsShaunak Saha
This patch sets the devicetree for gpe0_dw configuration and also configures the GPIO lines for SCI. EC_SCI_GPI is configured to proper value. BUG = chrome-os-partner:53438 TEST = Toggle pch_sci_l from ec console using gpioset command and see that the sci counter increases in /sys/firmware/acpi/interrupt and also 9 in /proc/interrupt Change-Id: If258bece12768edb1e612c982514ce95c756c438 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15556 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-12google/gru: Read RAM & board ids from the ADCShelley Chen
- Update so that the RAM id is read from ADC instead of hard-coded from the config array. - Update the boardid readings so that they are bucketed instead of within an error margin. BRANCH=None BUG=chrome-os-partner:54566,chrome-os-partner:53988 TEST=hexdump /proc/device-tree/firmware/coreboot/ram-code and boardid when OS boots up. Also verified that voltage read in debug output returns correct id. Change-Id: I963406d8c440cd90c3024c814c0de61d35ebe2fd Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 068705a38734d2604f71c8a7b5bf2cc15b0f7045 Original-Change-Id: I1c847558d54a0f7f9427904eeda853074ebb0e2e Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/356584 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/15586 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: Enable coreboot read recovery eventShelley Chen
Enable reading of keyboard recovery host event from coreboot. BUG=None BRANCH=None TEST=esc+refresh+power combo and make sure you see recovery fw screen. Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905 Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357841 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15585 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: enable EC software syncShelley Chen
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO info. BUG=chrome-os-partner:54566 BRANCH=None TEST=1. apreset from ec console. Check for "VbEcSoftwareSync() check for RW update" string in ap console. 2. Run "ectool version" from OS to check that RO/RW version are different and that we're in RW: RO version: kevin_v1.1.4818-8243672 RW version: kevin_v1.1.4762-1957187 Firmware copy: RW 3. Run crossystem ecfw_act. check for RW return value. Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7 Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433 Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357811 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15584 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12Gale: Add LED support.Suresh Rajashekara
Reusing the LED patterns as it was defined for Storm/WW/Platform. BUG=b:29051518 TEST=After about 3 seconds of powering on the device different colors should be seen at the LED ring, depending on the state of the device. Alternatively, move the device to different states manually by appropriate actions (like dev mode, rec mode etc) and observe the colors. BRANCH=None Change-Id: I6f1b23fee15747a402e209a2d06f8794bbc2c5a1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: be1194b095d9a5cf269710c43a27a5afb3e87b29 Original-Change-Id: Ie82d4e148025c0040cdb26f53f028d9b4cbe2332 Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/355200 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/15572 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-10gru: include ram_code in coreboot tableVadim Bendebury
This is needed to ensure that the ram-code node is included in the device tree by depthcharge. BRANCH=none BUG=chrome-os-partner:54566 TEST=built updated firmware, booted on kevin into Linux shell, checked the device tree contents: localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code 0000000 00 00 00 01 0000004 localhost # Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354705 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15566 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-08mainboard/google/reef: Use device driver for DA7219 configurationDuncan Laurie
Use the device driver for DA7219 device configuration in the SSDT and remove the static copy in the DSDT. Tested on reef to ensure that the generated SSDT contents are equivalent to the current DSDT contents. Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15539 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08google/reef: Add Maxim98357a supportHarsha Priya
Adds Maxim98357a support for reef using the generic driver in drivers/generic/max98357 Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517e0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15435 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-07mainboard/google/reef: apply EVT board changesAaron Durbin
Based on the board revision apply the correct GPIO changes. The only differences are the addition of 2 peripheral wake signals and a dedicated peripheral reset line. BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961 BRANCH=None TEST=Built and tested on reef. Change-Id: I9cac82158e70e0af1b454ec4581c2e4622b95b4b Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15562 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07mainboard/google/reef: add board_id() supportAaron Durbin
The board build version is provided by the EC on reef. Provide the necessary functional support for coreboot to differentiate the board versions. BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961 BRANCH=None TEST=Built and tested on reef. Change-Id: I1b7e8b2f4142753cde736148ca9495bcc625f318 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15561 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07mainboard/google/reef: add memory SKU id supportAaron Durbin
While the proto boards didn't have a memory SKU notion the EVT boards do. Therefore, provide support for selecting the proper memory SKU information based on the memory id straps. This works on EVT boards because the pins used for the strapping weren't used on proto. However, internal pullups need to be enabled so that proto boards read the correct id. BUG=chrome-os-partner:54949 BRANCH=None TEST=Built and used on reef for memory config. Change-Id: I8653260e5d1b9adc83b78ea2770c683b72535e11 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15560 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07nyan: Avoid running early_mainboard_init twice in vboot contextPaul Kocialkowski
A call to early_mainboard_init is already present in verstage, thus it is only necessary to call it from romstage when not in vboot context. Change-Id: I2e0b5a369c5fb24efae4ac40d83a31f5cf4a078d Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15450 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-02google/reef: Add DA7219 support in acpiSathyanarayana Nujella
Add DA7219 support in acpi. DA7219 has advanced accessory detection functionality. Also add DA7219's AAD as a ACPI data node. Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45032 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15436 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-02google/reef: ACPI: Move touchpad to SSDT and remove TPMDuncan Laurie
Instantiate the touchpad using the drivers/i2c/generic device driver to generate the ACPI object in the SSDT. There is not currently a separate wake pin for this device, this will be added in EVT hardware. This was tested on the reef board by ensuring that the touchpad device continues to work in the OS. Also remove the LPC TPM from the DSDT as it is not present. Change-Id: I3151a28f628e66f63033398d6fab9fd8f5dfc37b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15481 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/google/reef: Configure DDI0, DDI1 HPD GPIO linesAbhay Kumar
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD. Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/15447 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-01mainboard/google/reef: Use common NHLTSaurabh Satija
Add ACPI NHLT table generation that the current hardware supports. Reef supports two audio codecs, Dialog 7219 for headsets and Maxim 98357 for speakers. Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15440 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29google/reef: set 20K PULLUP on SDCARD DATA/CLK/CMDFreddy Paul
SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines. Without this SDCARD will throw data read/write errors. BUG=chrome-os-partner:54676 TEST=Build and boot to OS. Verify SD card is detected and data read/write works well. Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15345 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-28google/reef: disable unused devicesJagadish Krishnamoorthy
BRANCH=none BUG=chrome-os-partner:54325, chrome-os-partner:54581 TEST=device off in devicetree should disable the device. Change-Id: I5dada06cba0eea8a30f297e3a6940a36b2ff40ee Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-24rockchip/rk3399: provide multiple SDRAM configurationsLin Huang
We want to be able to easily change SDRAM clock rate for debugging purposes. This patch adds configurations for 4 different clock rates. Same configs are used for all rk3399 boards at 200, 666 and 800 MHz. Kevin board does not run reliably at 666 MHz, an option for it is added to run at 300 MHz, this option is available to Kevin only. There is not much room left in the coreboot romstage section, this is why the config file for 928 MHz is being added with this patch but is not included in the code, one of the lower frequency options will have to be dropped for the higher frequency option to be added. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and gru. Verified that on Kevin the firmware reports starting up SDRAM at 300 MHz and on Gru at 800 MHz. Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1 Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353493 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15309 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add elog supportSimon Glass
Add code to start up elog. This uses the EC RTC to obtain the timestamp. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512 Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353822 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15306 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add get_developer_mode_switch()Simon Glass
Add this function and make it return 0, as there is no physical dev switch (at least I think this is what we are supposed to do). This is needed for elog to work, which is needed so we can test RTC properly. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages: elog_init() SF: Detected W25Q64 with sector size 0x1000, total 0x800000 elog_find_flash() FMAP: area RW_ELOG found @ 5d8000 (32768 bytes) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) ELOG: flash area invalid elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096) SF: Successfully erased 4096 bytes @ 0x5d8000 elog_prepare_empty() elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) elog_is_header_valid() elog_update_event_buffer_state() elog_is_buffer_clear(base=0x000000000031d670 size=4088) elog_is_area_valid() ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000] ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024 elog_add_event_raw(type=16) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11) ELOG: Event(16) added with size 11 elog_add_event_raw(type=17) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13) ELOG: Event(17) added with size 13 elog_add_event_raw(type=A0) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9) ELOG: Event(A0) added with size 9 elog_add_boot_reason: Logged dev mode boot I can't actually see the timestamp, but the EC traffic is visible. Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353821 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15305 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Show the current time on start-upSimon Glass
Display the current time from the EC. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) boot on gru and see output: Date: 1970-01-17 (Saturday) Time: 1:42:44 Then reboot ~10 seconds later and see output: Date: 1970-01-17 (Saturday) Time: 1:42:53 Change-Id: I4288efc56f00e47f7575d0379a44871351da6200 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351783 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Enable EC-based RTCSimon Glass
Obtain the real-time clock value from the EC on start-up and show the current time. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and EC clock set, boot on gru into Linux shell and check the firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:09:16 Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351781 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24google/lars: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was tested on a Chell mainboard since I lack a lars device. Change-Id: Ifba6fc6589ddd54f4c85e8858f17997fbb4b6176 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15316 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24google/glados: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was verified on a glados board by verifying the SSDT contents against what used to be in the DSDT. Change-Id: I710cbb8462d0fe695297102a64bec8e4212acc65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15315 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24google/chell: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was verified by comparing the generated ACPI code in the SSDT to what was in mainboard.asl and ensuring the contents are functionally equivalent. Change-Id: I4725bbe2d47178568e3024fe3bb48cc80ff861c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15314 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-23intel/sandybridge: Fix builds with System Agent blobKyösti Mälkki
Broken with commit: 5c10abe nb/intel/sandybridge: increase MMCONF_BASE_ADDRESS Available sandybridge/systemagent-r6.bin has MMCONF hard-coded at some places and samsung/lumpy fails at boot here: CBFS: Locating 'mrc.bin' CBFS: Found @ offset 9fec0 size 2fc94 System Agent: Starting up... System Agent: Initializing These are the last lines as captured over USB debug. Change-Id: I441847f0e71a5e1be9c8ef6a04a81eb7bdd8a6d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15328 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23google/reef: Update chromeos.fmd fileFurquan Shaikh
1. Mark 256KiB at end of BIOS region as unusable BIOS region is memory-mapped just below 4GiB, however last 256KiB is unusable. Mark it accordingly in fmd file. 2. Use up holes in RW region for RW_A and RW_B. 3. Fill up holes in RO with UNUSED regions. BUG=chrome-os-partner:54672 Change-Id: I5facc566bb70d950522e12228b0631ddf00ac63d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15313 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23rockchip/rk3399: correct sdram inc file DENALI_CTL_217_DATA valueLin Huang
for per cs training, there should be more cycles to switch delay line. so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/352953 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23gru: kevin: initialize cr50 SPI interfaceVadim Bendebury
Set up the pins and initialize the driver. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the cr50. Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349852 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15296 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-22mainboard: Remove use of IFD_BIOS_START/IFD_BIOS_ENDFurquan Shaikh
BUG=chrome-os-partner:54563 Change-Id: If07710333cbb84ce70d6d4fa40602a74c898c08a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15293 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21rockchip: kevin/gru: Slow memory down to 300 MHzDouglas Anderson
At the higher speeds stressapptest shows memory errors. We don't want to track down random problems due to simple memory corruption, so slow memory back down to 300 MHz until someone figures out how to make it faster without sacrificing reliability. BRANCH=None BUG=chrome-os-partner:54144 TEST=stressapptest -M 1024 -s 240 Change-Id: I2417f93f65b1491a028a63ce563ed7dd7831becc Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I02182b25e677e27e8541445938f9da9ae9553fa6 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/350480 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15120 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass poweroff gpio parameter to BL31Lin Huang
To support gpio power off SOC, we need to pass the power off gpio parameter to BL31. Gru reuse tsadc overtemp pin as power off gpio, so need to iomux to gpio function when use gpio power off function, either in bl31 or depthcharge. BRANCH=None BUG=chrome-os-partner:53448 TEST=Build gru Change-Id: Ibfe64042f39f6df1b87536b50fe432859bf74426 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: Ie7a1bbea4a12753f0abac7a9142f2e032686ce31 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349703 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15119 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass reset gpio parameter to BL31Lin Huang
To support gpio reset SOC, we need to pass the reset gpio parameter to BL31. Note: request BL31 have supported this function. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I182cff11ce6f5dc3354db0dc053c128b813acf9f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I8283596565d552b1f3db31c28621a1601c226999 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349702 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15118 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21google/reef: Keep ISH enabled for nowFurquan Shaikh
Disabling ISH causes resets in FSP which leads to hang. This should be fixed in a later stepping. Until then keep ISH enabled. BUG=chrome-os-partner:54033 Change-Id: Id9cb276eed8d027ab6d2e81a5ec962bc730c1ff5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15142 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21google/reef: Add ACPI code for trackpadFreddy Paul
This patch enlists ELAN trackpad on I2C4 for reef board. BUG=None TEST=Build and boot to OS. Ensure ELAN trackpad is working with ELAN trackpad driver enabled in kernel. Change-Id: I788600f16dea9fac0e089cb82ccfc38a960157f9 Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15213 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21mb/google: remove superfluous header includes in bdw chromeboxesMatt DeVillier
Change-Id: I71443c7547a113bf9b64d48fe5a85c6e2302c8aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-17google/reef: Update EMMC DLL setting in all modeZhao, Lijian
Update tuned DLL setting on all other mode, including SDR12 SDR25 and DDR50. Change-Id: I1eb85ac6080fd78f63816d3fa9ef482484bd9f94 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/15210 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-16google/reef: Add NVRAM and LEGACY sections to chromeos.fmdFurquan Shaikh
Now that the flash size is increased to 16MiB, add RW_NVRAM and RW_LEGACY sections to chromeos.fmd file. BUG=chrome-os-partner:54390 Change-Id: I6c79d35295c4bc774f05f8045ac920474d7a791f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15192 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-16google/reef: Update flash size to 16MiBFurquan Shaikh
Use entire 16MiB flash size on reef. Adjust SIGN_CSE region accordingly. BUG=chrome-os-partner:54390 Change-Id: I94de509bdb2aa94625814123bf4d9758bfa37fc9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15191 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-16mb/google: Remove whitespace from devicetree on bdw boxes.Prabal Saha
Change-Id: I189836282b4ad084fbbb74199b24505f5e141b60 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15207 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins)
2016-06-16google/rikku: Upstream Acer Chromebox CXI2Matt DeVillier
Migrate google/rikku (Acer Chromebox CXI2) from Chromium tree to upstream, using google/guado as a baseline. original source: branch firmware-rikku-6301.110.B commit 2e71207 [CHERRY-PICK: broadwell: Update to microcode 0x1F] TEST=built and booted Linux on rikku with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.bin) external reference code (refcode.elf) Change-Id: Iba618a0b2cf2d613f6429b3e7606e0b47fa97a4d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/12802 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-14google/reef: Correct use of globalnvs.aslFurquan Shaikh
Use the correct globalnvs.asl from apollolake. BUG=chrome-os-partner:54342 Change-Id: I1a5b8f61c540bdb2668b532f032350d8e4d48010 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-14google/reef: Update EMMC DLL settingsZhao, Lijian
Update EMMC DLL setting for reef board, after that system can boot up into EMMC successfully. BUG=chrome-os-partner:54228 TEST=Boot up into EMMC and check with Rootdev Change-Id: I614cd624dce9069c5565599a955f87906bcea53b Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/15156 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-12mt8173: dram: Add more sample points to improve dram timing marginPH Hsu
BRANCH=none BUG=chrome-os-partner:52959 TEST=verified on elm-EVT SKU1/SKU2, Oak-rev5 2GB/4GB models. Change-Id: I228c629d9a3d6cd8fc5c4e8ba24cc52d5283b4e6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3c19e7d Original-Change-Id: I22356aa8d196c4c126742cfc7e85cc693acd9b39 Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347716 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15115 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12oak: Select VBOOT_EC_SLOW_UPDATE Kconfig optionJulius Werner
All current Oak boards have PD chips with update speeds that range from slow (Oak) to "OMG it's so awfully slow I could make a cup of coffee and it would still not be done" (Elm). Set the flag that enables the "Your system is applying a critical update. Please don't turn it off." message on EC software sync so that our users don't accidentally carry it back to the store and demand a refund while it's still not done booting. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak in normal mode with a new EC-RW image. Confirmed that I saw the magic screen. Change-Id: I000eab36d26b61b25d1f0da505f02ced15457255 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 274644b Original-Change-Id: I64ba698985d5fbcf2b94115df72b70a5319106ac Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348787 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15114 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the board can skip display initialization in the normal boot path. It's name is a left-over from a time when this could only happen by avoiding loading the VGA option ROM on x86 devices. Now we have other boards that can skip their native display initialization paths too, and the effect to vboot is the same. (Really, we should rename oprom_matters and oprom_loaded to display_skippable and display_initialized or something, but I don't think that's worth the amount of repositories this would need to touch.) The only effect this still has in today's vboot is to reboot and explicitly request display initialization for EC software sync on VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still, the vboot flag just declares the capability (for skipping display init), and it should be set correctly regardless of whether that actually makes a difference on a given platform (right now). This patch updates all boards/SoCs that have a conditional path based on display_init_required() accordingly. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak, confirmed that there's no notable boot time impact. Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c242f7 Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348786 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
Move the existing I2C voltage configuration variable into a new structure that is equivalent, similar to how USB ports are configured. This is to make room for additional I2C configuration options like bus speed and whether to enable the bus in early boot which are coming in a subsequent commit. The affected mainboards are updated in this commit so it will build. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e Reviewed-on: https://review.coreboot.org/15104 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-09skylake: gpio: Add support for setting 1.8V tolerantDuncan Laurie
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses that are at 1.8V. This is currently done by passing in a value to FSP but it is needed earlier than FSP if the I2C bus is used in verstage. This does not remove the need for the FSP input parameter, that is still required so FSP doesn't disable what has been set in coreboot. The mainboards that are affected are updated in this commit. This was tested by exercising I2C transactions to the 1.8V codec while in verstage on the google/chell mainboard. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c Reviewed-on: https://review.coreboot.org/15103 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: enable EC SPI interfaceVadim Bendebury
This configures and enables SPI interface #5 used for EC communications on Gru/Kevin. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the appropriate depthcharge change it is possible to trigger booting Chrome OS from the SD card by pressing '^U' on Gru keyboard at the right time. Change-Id: I5304bf47e030c0b9b7794752f30ffdca6c03a4f4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b5cc177 Original-Change-Id: I99883daa60562ccddfaeb858c1957d497f05a501 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346632 Reviewed-on: https://review.coreboot.org/15032 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08veyron: Add exception_init() to romstageJulius Werner
I'm not even sure how this slipped through... looks like it had never been there in the first place. Anyway, on ARM exceptions should always be reinitialized in all stages to make sure the handlers are still around (especially in an OVERLAP_VERSTAGE_ROMSTAGE board like this one). Change-Id: Ic74ea1448d63b363f2ed59d9e2529971b3d32d9a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-08gru: kevin: define GPIOs used on both platformsVadim Bendebury
The same GPIOs are used on both platforms, definitions are added an a new .h to make it easier to re-use them across the code. BRANCH=none BUG=chrome-os-partner:51537 TEST=panel backlight still enabled on Gru as before. The rest of the GPIOs are used in the upcoming patches. Change-Id: If06f4b33720ab4bf098d23fb91322bba23fe6e90 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c587880 Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346219 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15029 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08mainboard/google/reef: Configure sd card pinsJagadish Krishnamoorthy
Since the sd card cmd, data, cd lines are configured as native mode, allow the native controller to control the termination. Configure SDCARD_CLK_FB which is used for calibrating the timing of the actual clock buffer. BUG==chrome-os-partner:53747 TEST=verify sd card detection Change-Id: I56611826afb4fb32fefa7f1e4ba19ca4f30ba578 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://chromium-review.googlesource.com/348377 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15096 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-07google/reef: Add asl code to enable google ChromeECShaunak Saha
This patch adds asl code to include support for Google ChromeEC. We need this to show the battery icon and notifications like charger connect/disconnect etc. BUG = 53096 TEST = Plug/Unplug AC Adapter multiple times and make sure the battery connected is charging properly. Change-Id: I06f48eda894418514c8ed0136500fff0efd12a35 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15069 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-06-07Kevin/Gru : Update Board ID table.jongpil19.jung
Add board id table as kevin/gru configuration. BUG=chrome-os-partner:53519 BRANCH=chromeos-2016.02 TEST=check boot on Kevin board. Change-Id: I30c16916f3cda0ac88d2ce5a922e936a405fcc89 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 16c7b5486befd73c3e31624970ba1c97e526676f Original-Change-Id: Ib69ed9dad8e1a9e08717545c6be19a90e0298c43 Original-Signed-off-by: jongpil19.jung <jongpil19.jung@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345736 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15028 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-02google/reef: Select UART_FOR_CONSOLE for reefFurquan Shaikh
Change-Id: I714af8ab552dc1923a1b64e0c502d6c7b96dd444 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02Gale board: Move TPM setup function to verstage.cKan Yan
TPM should be only be reset once in verstage. BUG=chrome-os-partner:51096 TEST=Depthcharge no longer shows TPM error. BRANCH=None Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Commit-Id: 911bdaa83a05fa5c8ea82656be0ddc74e19064c3 Original-Change-Id: I52ee6f2c2953e95d617d16f75c8831ecf4f014f9 Original-Reviewed-on: https://chromium-review.googlesource.com/343537 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: I8047b7ba44c604d97a662dbf400efc9eea2c7719 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14845 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-06-01mainboard/google/reef: Add IFWI region to chromeos.fmdFurquan Shaikh
IFWI region holds different components required for booting including CSE firmware, PMC firmware, CPU microcode as well as the bootblock. Add section for IFWI in chromeos.fmd Change-Id: Ic97980ff222ad7cbd7a2970417b79150256a7a16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15000 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31google/ninja: Upstream AOpen Chromebox CommericalMatt DeVillier
Migrate google/ninja (AOpen Chromebox Commerical) from Chromium tree to upstream, using google/rambi as a reference. original source: branch firmware-ninja-5216.383.B commit 582a393 [Ninja, Sumo: Add SPD source for Hynix H5TC4G63CFR-PBA] TEST=built and booted Linux on ninja with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.elf) external reference code (refcode.elf) Change-Id: I0f1892c24c08fa2d53185b2cf8b6f5a9001b2397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/14950 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-30reef: Remove si-all region from chromeos.fmdFurquan Shaikh
This matches the change in depthcharge fmap.dts to remove si-all region and mark si-desc as ifd. CQ-DEPEND=CL:347986 BUG=chrome-os-partner:53689 BRANCH=None TEST=Compiles successfully Change-Id: Ic7ed94fcdfb9a79bd6ceb960830f67678b0291b6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14990 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27mainboard/google/reef: increase BIOS region sizeAaron Durbin
An updated descriptor expands the BIOS region while descreasing the 'device expansion region' utilized by the CSE. Update the end region marker to reflect this new size as well as the chromeos.fmd file which needs to be adjusted for logical boot parition 2 requirement which resides halfway through the BIOS region. The GBB was moved and shunk to accommodate the change. Change-Id: I7baa5282d7c608af648b5773c4dfa123060a6e45 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14974 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-27google/reef: Sync chromeos.fmd with fmap.dts and fix offsetsFurquan Shaikh
CQ-DEPEND=CL:347460 BUG=chrome-os-partner:53689 BRANCH=None TEST="emerge-reef chromeos-bootimage" completes without error Change-Id: Ic954e29628423937604772a8d2d0414954e6ba3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/347441 Commit-Ready: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/14975 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:34:00 +0000