summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
2015-01-27vboot2: read dev and recovery switchDaisuke Nojiri
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
2015-01-26rush: Add support for rush boardFurquan Shaikh
2015-01-19samus: Update indices of ramstage and refcode blobsRandall Spangler
2015-01-19samus: Delay bringing SSD out of resetDuncan Laurie
2015-01-19samus: Disable self refresh and MRC cache on broadwellDuncan Laurie
2015-01-19samus: Enable keyboard backlightDuncan Laurie
2015-01-19samus: add acpi resource for supporting RT5677 codecKane Chen
2015-01-16rambi: configure USBPHY_COMPBG by the setting in devicetree.cbKane Chen
2015-01-10Fix mainboard names for daisy and peach_pitDavid Hendricks
2015-01-09samus: Updates from P2 buildDuncan Laurie
2015-01-09samus: Enable EC ALS deviceDuncan Laurie
2015-01-09samus: Updates for P2 boardDuncan Laurie
2015-01-09storm: Increase DRAM size to 1024MBDavid Hendricks
2015-01-09storm: USB fixes for proto0Vadim Bendebury
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
2015-01-04ipq806x: Add USB supportJulius Werner
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
2015-01-04samus: Update for board revision 1.9Duncan Laurie
2015-01-04samus: Move SPD related information to spd directoryDuncan Laurie
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
2015-01-03storm: enable early consoleVadim Bendebury
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
2014-12-30nyan_blaze: Enable USB port2Neil Chen
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
2014-12-26blaze: change ramcode 0001/0010 to use 792MHz bctJerry Wang
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
2014-12-26blaze: change ramcode 0000 to use 792MHz bctKen Chang
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
2014-12-17tegra124: modify panel init sequenceKen Chang
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
2014-12-17nyan*: Add eventlog supportDavid Hendricks
2014-12-16blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204Neil Chen
2014-12-16i2c: Replace the i2c API.Gabe Black
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
2014-12-15nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.Neil Chen
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
2014-12-01Mark non-executable files non-executablePatrick Georgi
2014-11-30Replace hlt() loops with halt()Patrick Georgi
2014-11-26sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.Vladimir Serbinenko
2014-11-25google/butterfly: fix off-by-one issuesPatrick Georgi
2014-11-23sandy/ivy/nehalem: Remerge interrupt handlingVladimir Serbinenko
2014-11-14Big, Blaze: Set I2S1 Source to CLK_M to Fix BeepDaisuke Nojiri
2014-11-14nyan: tpm: Increase the TPM frequency to 400 KHz.Gabe Black
2014-11-14Nyan: Set I2S1 Source to CLK_MDaisuke Nojiri
2014-11-14nyan: Move some pinmux and clock/reset configuration to ROM stage.Gabe Black
2014-11-14t124: Clean up display init functionsJimmy Zhang
2014-11-14blaze: Create a nyan_blaze mainboard, copied from nyan_bigTom Warren
2014-11-13nyan*: Switching unused pin to GPIONeil Chen
2014-11-13nyan: big: Only delay when and as long as necessary in the PMIC setup code.Gabe Black
2014-11-13nyan: big: Set the i2c controller frequencies appropriately.Gabe Black
2014-11-13Nyan: Set DMA Reserve to 2MBDaisuke Nojiri
2014-11-13nyan: Select the CD570M Tegra124 model.Gabe Black
2014-11-13nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GBTom Warren
2014-11-13nyan: nyan_big: Mark the address range covering the SRAM as cachable.Gabe Black
2014-11-13nyan: Add 4GB bct supportJimmy Zhang
2014-11-13nyan: big: Check dram_end when setting up caching in ROM stage.Gabe Black
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
2014-11-12tegra124: Port a PWM clocking change to big.Gabe Black
2014-11-12tegra124: Enable PWM clock, and set up PWM1 pinAndrew Chew
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
2014-11-12nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.Gabe Black
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-11-08bd82x6x: Move to common FADT.Vladimir Serbinenko
2014-10-28mainboard/google/butterfly: Fix usage of GNU field designator extEdward O'Callaghan
2014-10-28mainboard/google/stout: Fix usage of GNU field designator extEdward O'Callaghan
2014-10-28rambi: switch MCLK from 19.2Mhz to 25MhzKein Yuan
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
2014-10-28rambi: always show dev/rec screens on eDP connected panelKein Yuan