summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2017-06-27mb/google: Remove ChromeEC builds for auron and rambiMartin Roth
The ChromeEC board directories for auron and rambi have been removed from the latest version of ChromeEC. Remove them here so the submodule can be brought forward. Change-Id: I763d03009f735d3f8aedbeb44788d03714c86102 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27mainboard/google/poppy: Update world facing camera sensorV Sowmya
Update the world facing camera sensor to OV13858 and also add delay of 5ms after xshutdown rising which indicates system ready status. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I0cd535e6568f104ffaa1092a13667def646df0eb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-27mainboard/google/poppy: Add clock frequency for camera sensorsV Sowmya
Add clock frequency property into _DSD ACPI object and set it to 19.2MHz for camera sensors. Upstream camera kernel has added a check for clock frequency in sensor probe function and without this property sensor probe fails. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I147b3c932a33ae034868f7f9b616500d24ca71e3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20294 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-20mb/google/poppy: Add camera devices power sequencing through ACPI power ↵V Sowmya
resources This patch controls the camera devices power through ACPI power resource. * Add Opregions for PMIC, * TI_PMIC_POWER_OPREGION * TI_PMIC_VR_VAL_OPREGION * TI_PMIC_CLK_OPREGION * TI_PMIC_CLK_FREQ_OPREGION * Add power resources for sensors and VCM, * OVTH for CAM0 * OVFI for CAM1 * VCMP for VCM * Implement _ON and _OFF methods for sensor and VCM module's power on and power off sequences. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: I87cd0508ed5ed922211a51f43ee96b6f44cf673d Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20mb/google/poppy: Configure ports and endpoints for sensor and CIO2 devicesV Sowmya
Bind the camera sensor and CIO2 devices through the ports and endpoints configuration available in _DSD ACPI object. * Port represents an interface in a device. * Endpoint represents a connection to that interface. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: I6d822165bb9a0cd6f7d4cdcb36333887953110a3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20google/fizz: Enable onboard lanShelley Chen
Enable RT8168_GET_MAC_FROM_VPD in fizz Kconfig. BUG=b:62090148, b:35775024 BRANCH=None TEST=Boot to kernel. Insert mac address into VPD vpd -s ethernet_mac=<address> reboot the system. Ensure we have ip address and corresponding mac address with ifconfig. Ensure ethernet controller shows up with lspci. Change-Id: I00f63dcb56a2c9a4600c8461bc94e06ec5ab2d81 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-20google/fizz: Enable cr50 over SPIShelley Chen
By default disabled. Will need to add FIZZ_USE_SPI_TPM config to enable. BUG=b:62456589, b:35775024 BRANCH=None TEST=Reboot and ensure that TPM works in verstage CQ-DEPEND=CL:530184 Change-Id: I14ce73a1c3745c996b79c4d4758ca744e63a46b4 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20134 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-20google/fizz: Enable cr50 over i2cShelley Chen
BUG=b:62456589, b:35775024 BRANCH=None TEST=Reboot and ensure verstage doesn't have any TPM errors CQ-DEPEND=CL:530185 Change-Id: Icfde0f62bd058d960fcb0c6fc67f9d8f6b9462f5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/20133 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-19mb/google/poppy: Add MIPI camera support.V Sowmya
This patch adds mipi_camera.asl, * Add TPS68470 PMIC related ACPI objects. * Add OV cameras related ACPI objects. * Add Dongwoon AF DAC related ACPI objects. * SSDB: Sensor specific database for camera sensor. * CAMD: ACPI object to specify the camera device type. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Change-Id: If32a2a8313488d2f50aad3feaa79e17b1d06c80f Signed-off-by: V Sowmya <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cbV Sowmya
Remove MIPI camera related register entries from devicetree.cb. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy and soraka. Change-Id: Ic6a6a98d4c8ed6cba760eae5fd87bc2a3f15d7d2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/19619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19mb/google/poppy: Add option to disable TPMNaresh G Solanki
Disable TPM when VBOOT_MOCK_SECDATA is enabled. BUG=None BRANCH=None TEST= Build image using USE="mocktpm" emerge-poppy coreboot depthcharge vboot_reference chromeos-bootimage . Verify boot is successful with mock tpm. Change-Id: Iee527ed17cffb7d25d9089e48a194d99ac8c3cd1 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19google/oak: gpio: update RAM ID pins for RowanYidi Lin
RAMD_ID_1 moves to PAD_DSI_TE and RAM_ID_2 moves to PAD_RDP1_A on Rowan. BUG=chrome-os-partner:62672 BRANCH=none TEST=emerge-rowan coreboot Change-Id: Iae44934d8d669d696b83f9d3e3450a0e408fe062 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Gerrit-Rebase-Ignore-CLs-Before: https://chromium-review.googlesource.com/539234 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/388068 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/453778 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/454921 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/455118 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/479613 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/487023 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/498587 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/506785 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/520572 Original-Commit-Id: 4da19b3c00578f96ec933cff9ad0c9988a4c4a30 Original-Change-Id: I64fd29de607a0b360d355fd3724e3a649adc658b Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448397 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
The differential signal of DQS needs to keep low level before gate training. RPULL will connect 4Kn from PADP to VSS and a 4Kn from PADN to VDDQ to ensure it. But if it has PHY side ODT connected at this time, it will change the DQS signal level. So it needs to disable PHY side ODT when doing gate training. BRANCH=None BUG=None TEST=boot from bob Change-Id: I56ace8375067aa0bb54d558bc28172b431b92ca5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: cb024042c7297a6b17c41cf650990cd342b1376f Original-Change-Id: I33cf743c3793a2765a21e5121ce7351410b9e19d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448278 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16google/parrot: use a GNVS variable to specify trackpad interruptMatt DeVillier
Use a GNVS variable to store the trackpad interrupt, in order to support both SNB and IVB variants from a single build. Change-Id: I53df35fff41f52a7d142aea9b1b590c65195bcfd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-16google/slippy: Don't force native graphics initPatrick Georgi
The board dutifully registers an int15h handler and provides the defaults to add a VGABIOS. That should be good enough to initialize graphics through the VGABIOS file. Fixes build on Chrome OS configurations (at least until the Ada toolchain situation is resolved over there). Change-Id: I1d956b5a163b7cdf2bd467197fba95f16e5e8fa3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-06-15google/gru: drive the stronger pull-up for touchpadCaesar Wang
As the hardware designed on gru, the AP_I2C_TP_PU_EN (gpio3_b4) controlled the SCL/SDA status to avoid leakage. And the gpio3_b4 of rk3399 pull resistor is 26k~71k and 3.3v for supply power, and gpio3_b4 pin connected 2.2k resistor to i2c of TP device. The default of this gpio status is pulled up during the start to bootup, it's very weak drive for the TP device that maybe cause to trigger the recovery process of elan's firmware. Also, the Elan updated its firmware(102.0.5.0) to delay checking the i2c of touchpad is greater than 1 second. So we have to drive the stronger pull-up within 1 second of powering up the touchpad to prevent its firmware from falling into recovery. Change-Id: I9a67d1c041afafde24ed9f00716ba41a9b41a8da Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-06-14mainboard/google/{poppy,soraka}: Disable unused GSPI1 interfaceFurquan Shaikh
TEST=Verified that board still boots to OS without any error. Change-Id: I02d2a6cbcab92766a35993bfd20aaeed4ca22c90 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-14mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI nodeFurquan Shaikh
Now that we dynamically disable TPM interface based on config options, add support for generation of SPI TPM ACPI node if SPI TPM is used. Change-Id: I87d28a42b48ba916c70e45a061c5efd91a8a59bf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-14mainboard/google/poppy: Disable unused TPM interface dynamicallyFurquan Shaikh
Based on the config options selected, decide at runtime which TPM interface should be disabled so that ACPI tables are not generated for that interface. TEST=Verified that unused interface does not show up in ACPI tables. Change-Id: Iee8f49e484ed024c549f60c88d874c08873b75cb Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20141 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-12soc/baytrail: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for google/rambi as to not break compilation. Change-Id: I4ef978214aa36078dc04ee1c73b3e2b4bb22f692 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20056 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for intel/strago and google/cyan as to not break compilation. Change-Id: Iaf8211bd86d6261ee8c4d9c4262338f7fe19ef43 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09google/chell: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Change-Id: Ie0b64eadc634049f6b65cf555407337fb7c4363c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-09mb/google/soraka: Update UF camera i2c addressNaresh G Solanki
Update user facing camera i2c address to 0x36. BUG=None TEST=Build & boot on soraka. Make sure user facing camera is detected. Change-Id: I4645ae5734faef4b6a821c04ab817a7b99da6e4b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
The new config choice is called RUN_FSP_GOP. Some things had to happen on the road: * Drop confusing config GOP_SUPPORT, * Add HAVE_FSP_GOP to chipsets that support it, * Make running the GOP an option for FSP2.0 by returning 0 in random VBT getters. Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Put gfx init methods into a `choice`Nico Huber
Provide all gfx init methods as a Kconfig `choice`. This elimates the option to select native gfx init along with running a Video BIOS. It's been only theoretically useful in one corner case: Hybrid graphics where only one controller is supported by native gfx init. Though I suppose in that case it's fair to assume that one would use SeaBIOS to run the VBIOS. For the case that we want the payload to initialize graphics or no pre-boot graphics at all, the new symbol NO_GFX_INIT was added to the choice. If multiple options are available, the default is chosen as follows: * NO_GFX_INIT, if we add a Video BIOS and the payload is SeaBIOS, * VGA_ROM_RUN, if we add a Video BIOS and the payload is not SeaBIOS, * NATIVE_VGA_INIT, if we don't add a Video BIOS. As a side effect, libgfxinit is now an independent choice. Change-Id: I06bc65ecf3724f299f59888a97219fdbd3d2d08b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
MAINBOARD_FORCE_NATIVE_VGA_INIT is to be selected instead of the user option MAINBOARD_DO_NATIVE_VGA_INIT. The distinction is necessary to use the latter in a choice. Change-Id: I689aa5cadea9e1091180fd38b1dc093c6938d69c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07mainboard/google/poppy: Add support for ELAN deviceFurquan Shaikh
Add support for ELAN 5515 device. BUG=b:62331218 Change-Id: Id91a41743330c9e356293cfda7b2e3743dcd480c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20040 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-05google/reef: Add coralPatrick Georgi
A new variant copied from reef. Allow override of the SKU. Change-Id: Ibe160e75aa23623812f0fb9121d1d8226afc00d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20020 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-04google/rambi: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each rambi variant has a different USB port config. Port data currently available for only candy and squawks; other variants to be added once data obtained. Change-Id: If7ce3d135d6ffe53ab1566d5258d01b052ac47f4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/jecht: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each jecht variant has a different USB port config. Change-Id: I3b15aac9c4971e2ae230106016fba3a583ec6c9a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/auron: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each auron variant has a different USB port config. Change-Id: Id17f21c23540d2e3d5a902a2174b66c7a5a5f3e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/slippy: populate PEI SPD data for all channelsMatt DeVillier
Since dual-channel setups use same RAM/SPD for both channels, populate spd_data[1] with same SPD data as spd_data[0], allowing info for both channels to propogate into the SBMIOS tables. Clean up calculations using SPD length to avoid repetition. Changes modeled after google/auron variants. Change-Id: I7e14b35642a3fbaecaeb7d1d33b5a7c1405bac45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-04google/parrot: make chromeos.c compilation conditional on CONFIG_CHROMEOSMatt DeVillier
No reason to compile/include chromeos.c for non-ChromeOS builds Change-Id: Ie8ef1f4c521b2a7308941299f2501073937bdf4a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04google/lulu: enable SATA device to sleep in S0Matt DeVillier
sata_devslp_disable was set to work around some buggy SSD firmware, but as it's disabled by default in both Linux and Windows, no reason to disable at the firmware level when many properly-functioning SSDs can take advantage of power savings. Change-Id: Ib15f8b51db19b3d9d2e135f85c71a15a45a2ffbd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
Update camera sensor detail to OV 13858 Also update i2c address of OV5670 BUG=None TEST= Build & boot to ChromeOS. Check for both the camera detection. Change-Id: I3b6192815201f605d3ebdb4bf54db26a8e837b35 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
This is to align with the SD_CD GpioInt setting in acpi BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I40aefcb0f571e7f6773a6d20226f357707aa041a Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/20001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
Light sensor isn't used and ACPI already removed, so disable I2C5 bus interface as well. Disable I2C6 for devices without a touchscreen Change-Id: Ib0e041ae9131615ef1140bad064de5aae91f8ee4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
Remove MONOTONIC_TIMER_MSR selection from mainboard Konfigs, as it only does a reduntant selection of HAVE_MONOTONIC_TIMER config, already selected under skylake soc Kconfig. Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20002 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
Enable H1 I2C TPM in Kconfig and devicetree for poppy. CQ-DEPEND=CL:513513,CL:*381534 BUG=b:36265511 BRANCH=None TEST=Compiles successfully. Change-Id: I4c6c94fa05abf9f5374505ded5956e879ac79726 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
BUG=b:62147763 Change-Id: Iba88fed972b847448e01fcfca8c7129d950244c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each slippy variant has slightly different USB port config; data for falco and leon to be added once available Change-Id: Icc3b5b1161f62ac0b840380679acafeff363cf45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. All beltino variants use the exact same USB port layout. Change-Id: If5b540949ea071f7165876e12ac1ef50e62d2b22 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Move inclusion of mainboard.asl after southbridge asl files so scopes referenced in usb.asl are valid. Change-Id: I58ea0b43f7f2c2692630df3bdb06af92566c1202 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie
Modify the DPTF configuration on Eve to relax the severe throttling that is currently applied and allow performance testing to see better results. BUG=b:35581264 TEST=performance tests show better results and thermal tests still pass. Change-Id: I0838f4ec3026bc8bac814698043fa97cf6772cb4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-31mb/google/eve: Add power controls to touchscreen deviceDuncan Laurie
Instead of having the SMI handler power off the touchscreen on the way into suspend add power resource controls to the ACPI device so the power is managed by the kernel instead of the BIOS. BUG=b:35581264 TEST=manual testing on Eve to ensure that the touchscreen is still functional at boot and after suspend/resume, and that it does not draw power in suspend. Change-Id: Id9a98807d24bbc7dff32408f3d113f6fad5bc023 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
The Tegra210 SoC never had a proper cpu_reset() implementation, so it's pointless to pretend there is one. Most ARM SoCs/boards only define hard_reset() at the moment anyway, so let's stick with that. Change-Id: I40f39921fa99d6dfabf818e7abe7a5732341cf4f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27lib/spd_bin: make SMBus SPD addresses an inputAaron Durbin
Instead of assuming the mapping of dimm number to SPD SMBus address, allow the mainboard to provide its own mapping. That way, global resources of empty SPD contents aren't wasted in order to address a dimm on a mainboard that doesn't meet the current assumption. Change-Id: Id0e79231dc2303373badaae003038a1ac06a5635 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-05-27google/fizz: Set GPP_C2 to NCShelley Chen
GPP_C2 is being used as strapping option, so should not be set to NF. Signal was floating previously, which can lead to an assertion of smbalert#. BUG=b:37681121, b:35775024 BRANCH=None TEST=powerd_dbus_suspend and ensure stays in suspend Change-Id: I68091206014621419b886b723a5681541be989bc Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19904 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-26mainboard/google/poppy: Add PowerResource for touchscreen deviceFurquan Shaikh
1. Do not enable touchscreen device by default in gpio configuration. 2. Select use of PowerResource for touchscreen device in devicetree so that the ACPI subsystem can take care of powering on/off the device. When system enters suspend, touchscreen device is powered off and on resume, it is powered back on. BUG=b:62028489 TEST=Verified 100 cycles of suspend-resume. Touchscreen still works on poppy. Change-Id: Ia0bebc7259b10cc60a9fa5b53542dfdd9685663e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19829 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-25mainboard/google/eve: Update VR config settingsV Sowmya
Update Psi2Threshold, IccMax, AcLoadline, DcLoadline VR config settings as per board design. BUG=b:38415991 BRANCH=none TEST=Build and boot eve. Change-Id: I274245821f68fb3151e5563ea0c75eaa1ad32c08 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/19826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-24mb/google/soraka: Update camera sensor for sorakaNaresh G Solanki
Soraka uses OV 13858 sensor. Hence update the same. Change-Id: I4dd39a25da47e379cca3f8748250b3ce1ff61e50 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-24mb/google/poppy: Update SPD dataNaresh G Solanki
Though SPD is rightly selected (i.e., H9CCNNNBKTALBR-NUD), it displays wrong part number during boot in coreboot logs. So correct part number info within the SPD. TEST= Build for Soraka & make sure part number is rightly printed. Change-Id: I67f676fb6ee9d685fa7aa41fdc4b00355e6d33c7 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19692 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24soc/marvell/bg4cd: remove cosmos mainboard and bg4cd socAaron Durbin
The SoC code was never completed. It's just a skeleton that gets in the way of refactoring other code. Likewise, the mainboard was never completed either. Just remove them both. Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19823 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-19mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCFFurquan Shaikh
BUG=b:37712455 Change-Id: Ia3d13ac7c18be8fa92603b6501a2e5df476adcf0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19766 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19mainboard/google/poppy: Fix SPD for micron MT52L256M64D2PP-107Furquan Shaikh
Fix SPD as per the vendor-provided data. BUG=b:37712790 Change-Id: Ib87c316479f4a05e64ca4acb540d7aacfa7338e9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-18google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel works Change-Id: I52f8f8f966034f5273d7c2e673e5ebdd9dccf748 Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-17mb/google/eve: Remove FPC device from SPI1Duncan Laurie
This device is no longer directly connected to the SOC so it does not need to be enabled in coreboot. BUG=b:35648259 TEST=build and boot on Eve Change-Id: I4ed5a5575ce51ba5f6f48b54fab42e00134ea351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19728 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-17mb/google/eve: Update touchpad I2C timingDuncan Laurie
The touchpad frequency was still slightly above 400kHz so tweak the timing values manually to get under the spec limit. BUG=b:35583133 TEST=verified the bus frequency with a scope to be < 400kHz Change-Id: I8bd071a8e15a791b7551ac256797e87abd6b5e5a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19727 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-17mainboard/google/poppy/variants/soraka: Enable H1 I2C TPMFurquan Shaikh
1. Add a separate devicetree file for soraka variant and add H1 node. 2. Enable H1 TPM for soraka. BUG=b:36265511 Change-Id: Id9947dce9b7f755971f0199f043af8d251d275ab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19519 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-05-17mainboard/google/poppy: Correct I2C bus number for TPMFurquan Shaikh
TPM is on I2C bus 1. Fix that. BUG=b:36265511 Change-Id: I7fb696ca7281a0c099dd325d794dd4551cf20a53 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19710 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-17google/fizz: Configure SATAXPCIe GPIOs to use native functionShelley Chen
BUG=b:37486021, b:35775024 BRANCH=None TEST=reboot and ensure that device detects SSD Change-Id: I4a85b9f3ba1d0a4c0a753420e166d3353417a1d1 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2017-05-12mainboard/google/reef: Config needed GPIO for pull-up WALijian Zhao
This change is needed to minimize circuit level stress, by adjusting circuit voltage for proper operation. For mem config GPIO changes: To avoid leakge as those pins have internal 20K pull and 3.3K pull down on mainboard, change internal pull up to none. BUG=b:37998248 TEST=Boot up into OS and enter s0ix. Change-Id: Id82035d8e1fff9fbb8dd3b4125460cdf61a58488 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19577 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
The coreboot had no supported the different frequency for gru yet. e.g: we can't support the bob to run ddr 800M for rev3 board and run 928M for rev4 board. So, in order to support the 800M and 928M ddr frequency for bob different boards. We will use the ram_id and board_id to select the board on bob. Change-Id: I613050292a09ff56f4636d7af285075e32259ef4 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
Spread Spectrum Modulator (SSMOD) is a fully-digital circuit used to modulate the frequency of the Silicon Creations’ Fractional PLL in order to reduce EMI. We need to turn the DPLL spread spectrum feature on to reduce the EMI noise for DDR on bob. Change-Id: I75461d4235bcf55324e6664a1220754e770b4786 Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-09google/sand: Add keyboard backlight supportKatherine Hsieh
BUG=None TEST=emerge-sand coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I86a35551a9348ff6ad26dfccd3b2786282d56069 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
Enable SAR and DSAR for reef. BUG=b:37612675 TEST=`emerge-reef coreboot` Change-Id: Ie0a59f8fcc9fb104328ee6d276ecab4193ec8eb8 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19579 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-05mb/google/poppy: Add eMMC as thermal sensorSumeet Pawnikar
This patch adds the eMMC as one of the thermal sensor under DPTF. Also, updates few comments for better interpretation and mapping. BUG=None BRANCH=None TEST=Built for poppy. Change-Id: I6d05bb7a2f857dc5bc98227c8327b2ff1bd5b913 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/19524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
This reverts commit 39b633b26d6d4cf185fbbdd5a256d0665409bd5b. Commit was accidentally pushed too early and broke the tree. I'll repush the original. Change-Id: Iaca6d43cc8fc0959565d5d151a330c0c7ba38309 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel work Change-Id: Id5f81867ea50f72cc0bc13074627134e0dc198ba Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
Update the DPTF parameters based on thermal test result. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU passive point:83, critial point:99 TSR0 passive point:60, critial point:70 TSR1 passive point:50, critial point:90 TSR2 passive point:77, critial point:90 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 4W, max to 12W, and step size to 0.2W 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 5secs Change CPU Effect on Temp Sensor 0 sample rate to 60secs The TRT of TCHG is TSR1, but real sensor is TSR2. sample rate to 30secs Change Charger Effect on Temp Sensor 2 sample rate to 30secs Change CPU Effect on Temp Sensor 2 sample rate to 120secs BUG=None TEST=build and boot on electro dut Change-Id: I0ea0bab7fa6b0ad75d9ddacbd7cd882f91e4b0db Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
Turn on device 1c.0 in order to enable devices under it. BUG=b:37486021, b:35775024 BRANCH=None TEST=Boot from NVMe Change-Id: Ide66823283c58d2bea0c9886f762f0581741affe Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
This is required to ensure that SCI is generated whenever a host event is set for MODE_CHANGE. Thus, when wake from MODE_CHANGE event occurs, eSPI SCI is generated which results in kernel handler reading host event from the EC and thus causes the wake pin to be de-asserted. BUG=b:37223093 TEST=Verified that wake from mode change event works fine in suspend mode and there is no interrupt storm for GPE SCI after resume. Change-Id: I1dd158ea0e302d5be9bcaa531cd1851082ba59fd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jenny Tc <jenny.tc@intel.com>
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
Remove the code that was enabling the keyboard backlight at boot since this is not desired behavior for this device. BUG=b:35581264 TEST=build and boot on Eve and ensure keyboard backlight does not turn on when booting but can still be enabled in the OS. Change-Id: I7229cf962597c0de74dc005f7afb9408f7a66f42 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
Set GPP_A13/SUSWARN# pin mode to native function 1. This pin is tied to SUSACK# in the schematic and and is intented to be used in Deep Sx so it should not be configured for GPIO mode. BUG=b:35581264 TEST=build and boot on Eve platform, test that Deep S3 and Deep S5 are still functional. (this change should have no visible effect) Change-Id: Ie2dc24d095872ab93a5bfcbe5307c3b7a8e4dbcc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
1. Add support for using cr50 I2C TPM on poppy. This will not be enabled until the next build. 2. Also, configure GPIOs for SPI and I2C TPM only if the corresponding Kconfig options are set. BUG=b:36265511 TEST=Verified on a reworked board that I2C TPM communication works fine. Change-Id: I3b293b8d410a6973a6dfea393c17d0be425b6a28 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
Update GPIO table to match the schematics for next build. Change-Id: I949a14bfaa7972f2257a0b11ee81dcb0771e2f7f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
Haswell, Broadwell, Baytrail, and Braswell ChromeOS devices' FADT version were incorrectly set to 3, rather than the correct ACPI_FADT_REV_ACPI_3_0. The incorrect value resulted in these devices reporting compliance to ACPI 2.0, rather than ACPI 3.0. This mirrors similar recent changes to SKL and APL SoCs. Test: boot any affected device and check ACPI version reported vai FADT header using OS-appropriate tools. Change-Id: I689d2f848f4b8e5750742ea07f31162ee36ff64d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-04-29rowan: Fix default test HWID.Patrick Berny
Correct the default GBB_HWID to "ROWAN TEST 9387" BRANCH=chromeos-2016.05 BUG=b:35774871 TEST=emerge-rowan coreboot chromeos-bootimage, strings /build/rowan/firmware/image.bin | grep "ROWAN TEST" and look for 9387 in output Change-Id: I7851010305caf056958c8a6a328b0506bf2208cd Signed-off-by: Patrick Berny <pberny@chromium.org> Reviewed-on: https://review.coreboot.org/19488 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
BUG=b:37712455 Change-Id: I3209aaef774712edab5e9f656ee84bfb6917b1c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19472 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
BUG=b:37712790 Change-Id: I7764b4ec55b0beea82eeb6c379ef38ceeb1fb04e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
Enable separate MRC cache for recovery mode. This requires change in flash layout to accomodate another region for RECOVERY_MRC_CACHE. BUG=b:37682566 TEST=Verified following scenarios: 1. Boot into recovery does not destroy normal mode MRC cache. 2. Once recovery MRC cache is populated, all future boots in recovery mode re-use data from the cache. 3. Forcing recovery mode to retrain memory causes normal mode to retrain memory as well. Change-Id: I4c748a316436001c5a33754084ab4a74243e21df Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19457 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I756513f02ac13e159d5b8b1ac2346fa42cf3c219 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cf18ed7b8fdf11594f812e5c48a2bd0fde5cb820 Original-Change-Id: I50c053ab7a6f6c14daee4fb2ab1cdcaeee2d67da Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452286 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19434 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
SD card detect pins should normally have a pull-up. It seems that for micro-SD cards this doesn't really matter all that much, but for the full-size slots we have on some Oak-derivatives (like Hana) it does. BRANCH=oak BUG=b:35854317 TEST=Booted Hana, confirmed that card detect no longer seemed stuck-on. Booted Elm and confirmed that SD card behavior didn't change. Change-Id: I9b20e0f6fe310e724d191e36ca0a81ab4fe5f593 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c2781eeef50f52c6f02ee9344274ddf4dcb0a946 Original-Change-Id: I428ac92efb07f94265673b04e0e0dd452649b9fd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/452861 Original-Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/19432 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-27mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c deviceWei-Ning Huang
The new touchpad firmware uses i2c-hid instead of custom reporting protocol. The touchpad also exposed another slave address (0x1e) for kernel to communicate with the touchpad EC. Change-Id: Iecaf14f7b8aed836120569e9ade9c3115bc00264 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19461 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-27google/poppy: Enable PD MCU deviceShamile Khan
In order for PD charge events to properly notify the OS when a charger is attached we need to enable the PD MCU device and event source from the EC. Without this change the charging still happens, but the OS does not notice and update the charge state icon in the Chrome OS UI. BUG=b:35586577 BRANCH=none TEST=On a poppy board that has the VBUS rework applied, plug in a charger to either port and see charge status updated to indicate charging in the power_supply_info tool and the Chrome OS UI. Change-Id: I59dcfc1cb5d11841f56cac7f4ffe461c2f9ec52a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/19441 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-04-27google/fizz: Configure HDMI HPD to use native functionShelley Chen
BUG=b:37684299, b:35775024 BRANCH=None TEST=reboot and ensure graphics are displayed through HDMI port. Change-Id: I74a664b2d42f55adfa64f292f6ede4c956e16fbf Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19451 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-27google/fizz: Enable SATA on port 1Shelley Chen
BUG=b:37486021 BRANCH=None TEST=compile coreboot and make sure sda and sdb show up in /sys/class/block. Change-Id: I11344a4a5fc7e5b5d907d25439f92744a5fb70da Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19450 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25google/gru: change the sd power sequenceCaesar Wang
In the safety considerations, we should make sure the slot of SD is enabled first, since we want to the power switch of corresponding is powered up. The different boards have the different power switch for sdmmc. Some power switch IC need turn on delay for long time. let's move the slot power of SD to romstage and avoid explicit delays or per-board. BRANCH=none BUG=b:35813418, b:35573103 TEST=check the signal for children of gru, and boot up from sd card. Change-Id: Id164e4c4c900c6b1ca0251fc27db4cd36c56f6ff Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ea1b01cc13628033b85251dbb44407f075efdc85 Original-Change-Id: I48ab543143d3de9be46608fc12d78e09decf8d79 Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/447076 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19430 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-25google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panelDaniel Kurtz
Unlike other oak derivatives, Rowan uses an 8-lane BOE tv097qxm-nu0 MIPI/DSI panel that requires dual DSI support. Rework oak display initialization to special case Rowan, which uses a provided edid struct for its panel, special panel backlight sequencing and needs to configure mtk_ddp and mtk_dsi to use dual dsi mode. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: I136ba5bd1ab12c4ad92995e066fc6d6cf54d0898 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19389 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25mediatek/mt8173: Add support for Dual DSI outputJitao Shi
The MT817x display output pipeline can be configured to drive an 8-lane MIPI/DSI panel using "dual DSI" mode. For the "dual DSI" video data path, the UFO block is configured to reorder the data stream into left and right halves which are then sent by the SPLIT1 block to the DSI0 and DSI1 respectively. The DSI0 and DSI1 outputs are then synchronously clocked at half the nominal data rate by their respective MIPI_TX0/MIPI_TX1 phys. Also, update the call sites in oak mainboard to avoid build breakage. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Id47dfd7d9e98689b54398fc8d9142336b41dc29f Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19361 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25google/oak: Use edid_set_framebuffer_bits_per_pixelDaniel Kurtz
This helper function was introduced so that mainboards don't need to manually fill in these struct edid fields. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Ic9404a786a28b314b710e037dcae776be4b584ca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19388 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-24google/oak: Support cr50 over I2C on rowanVadim Bendebury
This patch enables TPM2 using cr50 over I2C for the Rowan board, and adds an mt8173 specific TPM IRQ polling function. The function relies on the appropriate EINT input configured to trigger the ready status on the rising edge. The cr50 TPM is on I2C address 0x50. The cr50 interrupt GPIO is also made available for use by depthcharge via the coreboot tables. BRANCH=none BUG=b:36786804 TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are configured to use IRQ flow control when talking to the Cr50 TPM. Change-Id: If6cdd0e39e4ac86538f27f322c55c329179ee084 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19364 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
DRIVER_TPM_I2C_IRQ has been removed. TPM_TIS_ACPI_INTERRUPT now specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: If66a2a1d461a411e112589c84a434066d48b9399 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19410 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
DRIVER_TPM_I2C_IRQ has been removed. TPM_TIS_ACPI_INTERRUPT now specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ia1eacd15e71a46a37457ee2f117b156393c3393d Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19409 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ic69add8a3ce35be64fb37db4ed40163f6144fc9c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19408 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ifeb09a0a35bff7cd9091f6d027f0065288ca35c9 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19407 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/poppy: use intel common tis_plat_irq_status()Aaron Durbin
Utilize the intel/common code for tis_plat_irq_status() to remove dependencies and code duplication on for bringing up a board requiring tis_plat_irq_status(). Change-Id: I2aaa1d7d3ce171dc1788438ff9990fce533deb6c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19371 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 11:20:42 +0000