summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2019-02-13soc/intel/cannonlake: Don't use CAR_GLOBALArthur Heymans
2019-02-12mb/google/octopus/casta: Tune usb2eye settingSeunghwan Kim
2019-02-12google/kahlee: Remove unneeded HAVE_ACPI_RESUME guardKyösti Mälkki
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
2019-02-08mb/google/hatch: Replace part-specific SPD files with generic onesShelley Chen
2019-02-08drivers/gpio_keys: Remove redundant is_wakeup_source flagKarthikeyan Ramasubramanian
2019-02-08mb/*/*/romstage: curly braces after the function definitionPeter Lemenkov
2019-02-07src: Remove unused include device/pnp_def.hElyes HAOUAS
2019-02-07mb/google/{hatch,sarien}: Configure GPIOs using cnl_configure_padsFurquan Shaikh
2019-02-07soc/intel/cannonlake: Add Whiskeylake SoC kconfigSubrata Banik
2019-02-06mb/google/hatch: Configure I2C busesFurquan Shaikh
2019-02-06mb/google/reef: Expand the coreboot RO sectionMathew King
2019-02-05mb/google/sarien: Set system type for the board variantsDuncan Laurie
2019-02-05mb/google/hatch: Add keyboard backlight supportIvy Jian
2019-02-05mb/google/poppy/variants/atlas: config GPP_D1 as no-connectCaveh Jalali
2019-02-05Revert "mb/google/poppy/variant/atlas: I2C: run trackpad at 1MHz"Caveh Jalali
2019-02-05mb/google/kukui: Add default HWID for Chrome OSHung-Te Lin
2019-02-05mb/google/octopus: Add USB ACPI configuration for CNVi BT moduleKarthikeyan Ramasubramanian
2019-02-05mb/google/hatch: Add USB port capability ACPI support for USB2 port10Aamir Bohra
2019-02-04soc/intel/cannonlake: Remove SOC_INTEL_CANNONLAKE_MEMCFG_INIT KconfigSubrata Banik
2019-02-01mb/google/hatch: Enable S0ixShelley Chen
2019-01-31mb/google/sarien: Turn on ASPM L1.2 for Card ReaderLijian Zhao
2019-01-31mb/google/octopus: Add Bluetooth USB ACPI configurationKarthikeyan Ramasubramanian
2019-01-31google/kukui: Set GPIO_RESET to output modeTristan Shieh
2019-01-30mainboard/{google,intel}: Remove SaGv hard codingRonak Kanabar
2019-01-30mb/google/sarien/variants/arcada: Adjust TP/TS/H1 I2C CLK to meet specCasper Chang
2019-01-30mb/google/octopus/casta: Correct unused GPIO pad configurationSeunghwan Kim
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
2019-01-29mb/google/octopus/var/phaser: Hook up Raydium touchscreenHao He
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
2019-01-28mainboard/google/octopus/variants/casta: Decrease touchpad I2C CLK frequencySeunghwan Kim
2019-01-28mb/google/sarien: Using HID over I2C to enable Melf TouchScreenChris Zhou
2019-01-25mb/google/octopus: Override emmc DLL values for AmptonKane Chen
2019-01-25mb/google/sarien: Force power on after cr50 updateDuncan Laurie
2019-01-25mb/google/sarien: Increse BIOS region size to 28MBLijian Zhao
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ne...Jan Tatje
2019-01-24mb/google/sarien/variants: Set tcc offset valueSumeet Pawnikar
2019-01-24mb/google/sarien: Fix recovery mode detectionDuncan Laurie
2019-01-24mb/google/octopus/bobba: Add support to handle PEN_EJECT eventKarthikeyan Ramasubramanian
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
2019-01-24cpu/intel/model_206ax: Remove the notion of socketsArthur Heymans
2019-01-23mb/google/sarien: Replace B0D4 with TCPUSumeet Pawnikar
2019-01-23mb/*/*/devicetree.cb: Make sandybridge devicetree uniformArthur Heymans
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
2019-01-23mb/google/poppy/variant/nami: disable unused usb2 portsRen Kuo
2019-01-23mb/google/arcada: Add settings for noise mitgationCasper Chang
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
2019-01-23mb/google/poppy/variants/nami: close the FP power in S5Ren Kuo
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
2019-01-23mb/google/octopus: Override emmc DLL values for MeepKane Chen
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
2019-01-20mb/google/octopus/variants: Disable xHCI compliance mode for FleexAmanda Huang
2019-01-20mb/google/octopus/variants/meep: Disable xHCI compliance modeWisley Chen
2019-01-18mb/google/sarien/variants: Add Thermal Sensors informationSumeet Pawnikar
2019-01-18mb/google/sarien/variants/sarien: Adjust TP/TS/H1 I2C CLK to meet specDtrain Hsu
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
2019-01-17src/mainboard/google/sarien: query recovery mode from Cr50Keith Short
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
2019-01-17hatch: disable sw syncShelley Chen
2019-01-16mb/google/sarien/variants/sarien: Set up tcc offset for sarienJohn Su
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
2019-01-16mb/google/kahlee/careena: Add 20ms delay to captureAkshu Agrawal
2019-01-16mb/google/kahlee/liara: Add 20ms delay to captureAkshu Agrawal
2019-01-16nb/intel/sandybridge: Remove the C native graphic initArthur Heymans
2019-01-16mb/google/sarien: Enable Camarillo DeviceLijian Zhao
2019-01-16mb/google/sarien: Set PL1 and PL2 valuesSumeet Pawnikar
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
2019-01-16mb/google/sarien: Set Vref Config to 2Lijian Zhao
2019-01-15mb/google/atlas: Enable camera module NVMChen, JasonX Z
2019-01-15mb/*/*: Use libgfxinit on sandy and ivy bridge boardsArthur Heymans
2019-01-14Revert "mb/google/kalista: Disable EC-EFS"Patrick Georgi
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 20:13:40 +0000