summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-07-31google/kahlee: Add mainboard GPIOs to ACPIMarc Jones
2017-07-31google/kahlee: Fix CTRL+U USB bootMarc Jones
2017-07-31google/kahlee: Move mainboard_ec_init to chip init phaseMarc Jones
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
2017-07-31google/kahlee: Add EC and GNVS ACPIMarc Jones
2017-07-31google/kahlee: Enable TPMMarc Jones
2017-07-31google/kahlee: Save VBNV data to CMOSMarc Jones
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
2017-07-28google/kahlee: Add ASL for Elan touchpadIvy Jian
2017-07-28google/kahlee: Fix ASL whitespace and formattingMarc Jones
2017-07-28google/kahlee: Remove conflicting AAHB IRQ ASLIvy Jian
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
2017-07-27google/kahlee: Set SERIRQ to continuous modeMarc Jones
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
2017-07-27google/kahlee: Set FADT legacy and 8042 supportedMarc Jones
2017-07-27google/kahlee: Add ChromeOS and ChromeECMarshall Dawson
2017-07-27google/kahlee: Update GPIO tableMarshall Dawson
2017-07-27google/kahlee: Update for single DIMMMarshall Dawson
2017-07-27google/kahlee: Remove AMD IMCMarshall Dawson
2017-07-27google/kahlee: Update KconfigMarc Jones
2017-07-27google/kahlee: Start Kahlee mainboardMarc Jones
2017-07-27mainboard/google/poppy: Configure GPIO.1 and GPIO.2 for daisy chain modeV Sowmya
2017-07-24google/reef: Configure EN_PP3300_DX_LTE on coralPatrick Georgi
2017-07-24google/reef: copy gpio.c for coralPatrick Georgi
2017-07-24Update files with no newline at the endMartin Roth
2017-07-24Fix files with multiple newlines at the end.Martin Roth
2017-07-24mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pinWisley Chen
2017-07-23mainboard/google/{poppy,soraka}: Enable S0ixRajat Jain
2017-07-22mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} configFurquan Shaikh
2017-07-22mainboard/google/poppy/variants/soraka: Define separate gpio tablesFurquan Shaikh
2017-07-19google/gru: Add support for Scarlet rev1Julius Werner
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
2017-07-19google/snappy: Add keyboard backlight supportKevin Chiu
2017-07-14google/fizz: Override PL2 and SysPL2 valuesShelley Chen
2017-07-13google/butterfly: add function needed for MRC raminitMatt DeVillier
2017-07-13mainboard/google/soraka: add wacom touchscreen supportWisley Chen
2017-07-12google/gru: Add NefarioPhilip Chen
2017-07-12mainboard/google/snappy: Increase PL1 Min to 4.5WWisley Chen
2017-07-12mb/google/soraka: Do not reset PMIC during sleepNaresh G Solanki
2017-07-10google/chell: remove non-existent touchscreenMatt DeVillier
2017-07-06mainboard/[g-l]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
2017-07-02mainboard/google/slippy: Fix misspelled ifdef guardRyan Salsamendi
2017-07-01mb/google/eve: Fix interrupt config for audio devicesDuncan Laurie
2017-07-01mb/google/eve: Set TOUCHSCREEN_STOP_L GPIO to inputDuncan Laurie
2017-07-01mb/google/eve: Do not limit memory speed on new SKU 5 boardsDuncan Laurie
2017-07-01mb/google/eve: Implement EC device events for S3 wakeDuncan Laurie
2017-07-01mainboards: Remove unused EC event for thermal overloadDuncan Laurie
2017-06-29lib/spd_bin: Use proper I2C addressesNico Huber
2017-06-28mainboard/google/fizz: Add audio devicesKevin Cheng
2017-06-27mainboard/google/soraka: Update VR config settingsRajneesh Bhardwaj
2017-06-27mb/google/soraka: Remove MPS IMVP8 workaroundRajneesh Bhardwaj
2017-06-27mb/google: Remove ChromeEC builds for auron and rambiMartin Roth
2017-06-27mainboard/google/poppy: Update world facing camera sensorV Sowmya
2017-06-27mainboard/google/poppy: Add clock frequency for camera sensorsV Sowmya
2017-06-20mb/google/poppy: Add camera devices power sequencing through ACPI power resou...V Sowmya
2017-06-20mb/google/poppy: Configure ports and endpoints for sensor and CIO2 devicesV Sowmya
2017-06-20google/fizz: Enable onboard lanShelley Chen
2017-06-20google/fizz: Enable cr50 over SPIShelley Chen
2017-06-20google/fizz: Enable cr50 over i2cShelley Chen
2017-06-19mb/google/poppy: Add MIPI camera support.V Sowmya
2017-06-19mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cbV Sowmya
2017-06-19mb/google/poppy: Add option to disable TPMNaresh G Solanki
2017-06-19google/oak: gpio: update RAM ID pins for RowanYidi Lin
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
2017-06-16google/parrot: use a GNVS variable to specify trackpad interruptMatt DeVillier
2017-06-16google/slippy: Don't force native graphics initPatrick Georgi
2017-06-15google/gru: drive the stronger pull-up for touchpadCaesar Wang
2017-06-14mainboard/google/{poppy,soraka}: Disable unused GSPI1 interfaceFurquan Shaikh
2017-06-14mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI nodeFurquan Shaikh
2017-06-14mainboard/google/poppy: Disable unused TPM interface dynamicallyFurquan Shaikh
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
2017-06-12soc/baytrail: fix scope for I2C ACPI devicesMatt DeVillier
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
2017-06-09google/chell: add board-specific USB port infoMatt DeVillier
2017-06-09mb/google/soraka: Update UF camera i2c addressNaresh G Solanki
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
2017-06-08device/Kconfig: Put gfx init methods into a `choice`Nico Huber
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
2017-06-07mainboard/google/poppy: Add support for ELAN deviceFurquan Shaikh
2017-06-05google/reef: Add coralPatrick Georgi
2017-06-04google/rambi: add board-specific USB port infoMatt DeVillier
2017-06-04google/jecht: add board-specific USB port infoMatt DeVillier
2017-06-04google/auron: add board-specific USB port infoMatt DeVillier
2017-06-04google/slippy: populate PEI SPD data for all channelsMatt DeVillier
2017-06-04google/parrot: make chromeos.c compilation conditional on CONFIG_CHROMEOSMatt DeVillier
2017-06-04google/lulu: enable SATA device to sleep in S0Matt DeVillier
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie