Age | Commit message (Expand) | Author |
2014-11-23 | sandy/ivy/nehalem: Remerge interrupt handling | Vladimir Serbinenko |
2014-11-14 | Big, Blaze: Set I2S1 Source to CLK_M to Fix Beep | Daisuke Nojiri |
2014-11-14 | nyan: tpm: Increase the TPM frequency to 400 KHz. | Gabe Black |
2014-11-14 | Nyan: Set I2S1 Source to CLK_M | Daisuke Nojiri |
2014-11-14 | nyan: Move some pinmux and clock/reset configuration to ROM stage. | Gabe Black |
2014-11-14 | t124: Clean up display init functions | Jimmy Zhang |
2014-11-14 | blaze: Create a nyan_blaze mainboard, copied from nyan_big | Tom Warren |
2014-11-13 | nyan*: Switching unused pin to GPIO | Neil Chen |
2014-11-13 | nyan: big: Only delay when and as long as necessary in the PMIC setup code. | Gabe Black |
2014-11-13 | nyan: big: Set the i2c controller frequencies appropriately. | Gabe Black |
2014-11-13 | Nyan: Set DMA Reserve to 2MB | Daisuke Nojiri |
2014-11-13 | nyan: Select the CD570M Tegra124 model. | Gabe Black |
2014-11-13 | nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GB | Tom Warren |
2014-11-13 | nyan: nyan_big: Mark the address range covering the SRAM as cachable. | Gabe Black |
2014-11-13 | nyan: Add 4GB bct support | Jimmy Zhang |
2014-11-13 | nyan: big: Check dram_end when setting up caching in ROM stage. | Gabe Black |
2014-11-12 | Copy u-boot sources as is and modify the tree to still build | Vadim Bendebury |
2014-11-12 | Include IPQ8064 SBLs code in the coreboot bootblock | Vadim Bendebury |
2014-11-12 | tegra124: Program PWM1 to drive panel backlight | Andrew Chew |
2014-11-12 | tegra124: Port a PWM clocking change to big. | Gabe Black |
2014-11-12 | tegra124: Enable PWM clock, and set up PWM1 pin | Andrew Chew |
2014-11-12 | tegra124: nyan: Keep in memory structures below 4GB. | Gabe Black |
2014-11-12 | nyan: Use asm volatile instead of plain asm so it doesn't get optimized out. | Gabe Black |
2014-11-10 | arm: Redesign, clarify and clean up cache related code | Julius Werner |
2014-11-09 | src: Too many terminators ';;' at end of stmts, stop Skynet | Edward O'Callaghan |
2014-11-08 | bd82x6x: Move to common FADT. | Vladimir Serbinenko |
2014-10-28 | mainboard/google/butterfly: Fix usage of GNU field designator ext | Edward O'Callaghan |
2014-10-28 | mainboard/google/stout: Fix usage of GNU field designator ext | Edward O'Callaghan |
2014-10-28 | rambi: switch MCLK from 19.2Mhz to 25Mhz | Kein Yuan |
2014-10-28 | baytrail: Remove unused devicetree fields | Shawn Nematbakhsh |
2014-10-28 | rambi: always show dev/rec screens on eDP connected panel | Kein Yuan |
2014-10-22 | tegra/nyan*: sdram updates | Tom Warren |
2014-10-22 | baytrail/rambi: S3 support and other updates | Kein Yuan |
2014-10-18 | lynxpoint: Consolidate common GNVS init | Vladimir Serbinenko |
2014-10-17 | bd82x6x: Consolidate common GNVS init | Vladimir Serbinenko |
2014-10-17 | Add board_info for all Google/Intel boards mitting the file | Stefan Reinauer |
2014-10-16 | smbios: Mark laptops as such | Vladimir Serbinenko |
2014-10-16 | bd82x6x: Move common bd82x6x S3 detect to bd82x6x code. | Vladimir Serbinenko |
2014-10-16 | sandybridge: Move common northbridge finalize to northbridge code. | Vladimir Serbinenko |
2014-10-01 | storm: Add generic support skeleton for storm | Furquan Shaikh |
2014-09-29 | google/panther: add board_info.txt | Matt DeVillier |
2014-09-29 | google/panther: Be safe about invalid thermal readings | Stefan Reinauer |
2014-09-25 | Peppy/Falco: always use native graphics | Ronald G. Minnich |
2014-09-25 | snow: Rename snow to daisy. | Gabe Black |
2014-09-25 | peppy and falco: set panel power timings in northbridge, using devicetree, no... | Ronald G. Minnich |
2014-09-25 | pit: Rename pit to peach_pit. | Gabe Black |
2014-09-24 | big: Create a nyan_big mainboard which is a copy of nyan. | Gabe Black |
2014-09-22 | google/{falco,peppy}/gma.c: Do not include non-existent "hda.h" | Paul Menzel |
2014-09-22 | google/link, intel/wtm2: Do not include non-existent "hda.h" in i915.c | Paul Menzel |
2014-09-22 | haswell: Move to per-device ACPI | Vladimir Serbinenko |
2014-09-22 | tegra124/nyan: memory and display updates | Andrew Bresticker |
2014-09-22 | snow/pit: include chromeos.c in romstage | Isaac Christensen |
2014-09-19 | baytrail/rambi: spi, charger, and audio updates | Aaron Durbin |
2014-09-18 | samus: Enable XHCI mode by default | Duncan Laurie |
2014-09-18 | rambi/baytrail: ACPI, GPIO, audio, misc updates | Shawn Nematbakhsh |
2014-09-18 | slippy: remove FUI support | Ronald G. Minnich |
2014-09-17 | spi: add Kconfig variable for dual-output read enable | David Hendricks |
2014-09-13 | intel/gma: consolidate vbt code | Vladimir Serbinenko |
2014-09-13 | arm: Move exception_init() close to console_init() | Julius Werner |
2014-09-13 | tegra124/nyan: display, clock, and other updates | Julius Werner |
2014-09-13 | azalia: Shrink boilerplate | Vladimir Serbinenko |
2014-09-12 | tegra124/nyan: various fixes and additions | Hung-Te Lin |
2014-09-12 | panther: update chromeos.c | Isaac Christensen |
2014-09-11 | tegra124/nyan: rougly stable code base | Gabe Black |
2014-09-11 | Move nehalem/sandy/ivy to per-device acpi | Vladimir Serbinenko |
2014-09-11 | mainboard/google/parrot: fix ACPI interrupt storm on lid switch change | Andrew Litt |
2014-09-10 | samus: Fix 8GB SPD | Duncan Laurie |
2014-09-10 | samus: GPIO updates for Proto1b | Duncan Laurie |
2014-09-10 | nyan: Add a stub mainboard. | Gabe Black |
2014-09-08 | Haswell/falco/peppy/slippy: continue to clean up FUI. | Ronald G. Minnich |
2014-09-08 | FALCO: stop using the slippy graphics code | Ronald G. Minnich |
2014-09-08 | samus: Disable SMBus controller | Duncan Laurie |
2014-09-08 | samus: Tweaks from bringup | Duncan Laurie |
2014-09-08 | samus: Fix up memory SPD information | Duncan Laurie |
2014-09-08 | samus: Add onboard device configuration | Duncan Laurie |
2014-09-08 | samus: Change thermal behavior to match other haswell platforms | Duncan Laurie |
2014-09-05 | Consolidate intel vga int15 hooks | Vladimir Serbinenko |
2014-09-05 | azalia: Use convenience macros throughout | Vladimir Serbinenko |
2014-09-01 | google/link: Use common i915_reg.h. | Vladimir Serbinenko |
2014-09-01 | stout: Kill dead i915 files | Vladimir Serbinenko |
2014-08-31 | samus: Change SPD to indicate LPDDR | Duncan Laurie |
2014-08-29 | samus: Add ACPI MADT interrupt override for GPIO IRQ 14 | Duncan Laurie |
2014-08-29 | samus: Add coreboot board | Duncan Laurie |
2014-08-28 | Peppy/Haswell: move more support functions from mainboard to the intel i915 d... | Ronald G. Minnich |
2014-08-26 | armv7: Move Exynos from 'cpu' to 'soc'. | Hung-Te Lin |
2014-08-26 | Peppy, Haswell: refactor and create set_translation_table function in haswell... | Ronald G. Minnich |
2014-08-25 | intel/gma: Clarify code and use dedicated init for Google Peppy | Ronald G. Minnich |
2014-08-22 | Remove dead video.asl | Vladimir Serbinenko |
2014-08-18 | trustzone: Pull trustzone init out of cpu.c and do it in romstage. | Gabe Black |
2014-08-18 | exynos5: Implement support for USB 3.0 DRD PHYs/controllers | Julius Werner |
2014-08-18 | azalia: Move shared variable to separate file | Vladimir Serbinenko |
2014-08-18 | mainboard/XXX/YYY/dsdt.asl: Whitespace fix | Martin Roth |
2014-08-15 | intel/cpu: rename car.h to romstage.h | Aaron Durbin |
2014-08-14 | pit: snow: Fix snow, fix up pit write protect. | Gabe Black |
2014-08-14 | Intel: Add common header file for CAR setup | Edward O'Callaghan |
2014-08-14 | exynos5: Refactor crazy old U-Boot base address macros away | Julius Werner |
2014-08-13 | Falco: Patch to setup FUI (coreboot initializations) for falco | Furquan Shaikh |
2014-08-13 | Falco: Patch to enable correct port clock selection for dp | Furquan Shaikh |
2014-08-13 | Falco/Slippy: Patch to refactor haswell/gma.c and mainboard/google/slippy/i91... | Furquan Shaikh |
2014-08-13 | chromeos: On ARM platforms VBNV lives in the EC | Stefan Reinauer |