summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2013-12-21falco: Enable EC controlled throttlingDuncan Laurie
2013-12-21falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5Duncan Laurie
2013-12-21pit: Add missing elements to the edid data structureGabe Black
2013-12-21pit: Bump the EC SPI bus speed up to 5 MHzGabe Black
2013-12-21falco: add rtd2132 settings to device treeAaron Durbin
2013-12-21Pit: set PWM to external on ParadeRonald G. Minnich
2013-12-21Pit: move parade writes to mainboard.cRonald G. Minnich
2013-12-21peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.Shawn Nematbakhsh
2013-12-21FUI: Fill in link_m and link_n valuesFurquan Shaikh
2013-12-21Slippy: remove unneeded code in i915io.cRonald G. Minnich
2013-12-21slippy/falco/peppy: Route USB to XHCI on resumeDuncan Laurie
2013-12-21haswell boards: fix SATA interrupt in ACPIDuncan Laurie
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
2013-12-21lynxpoint me: add support for mbp clear wait in finalize stepDuncan Laurie
2013-12-21Revert "lynxpoint: Move ME lock down to ramstage"Duncan Laurie
2013-12-21SLIPPY: final changes for FUIRonald G. Minnich
2013-12-21peppy: Duplicate SPD data for 2GB configurations.Shawn Nematbakhsh
2013-12-21haswell boards: Use PECI temp sensor id 0Duncan Laurie
2013-12-21falco: Enable RTD2132 spread spectrum at 1.0%Duncan Laurie
2013-12-21bolt: make the gpio interrupts edge sensitiveAaron Durbin
2013-12-12bolt: Initial mainboard commitDuncan Laurie
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
2013-12-12slippy/falco/peppy: make GPIO interrupts be edge triggeredDuncan Laurie
2013-12-12falco: drive WLAN_DISABLE_L low in S3 and S5Aaron Durbin
2013-12-12exynos5420: Setup clocks for MMC bus controller.Hung-Te Lin
2013-12-12peppy: Add backward-compatible RAM_ID table.Shawn Nematbakhsh
2013-12-12Peppy: Update Realtek ALC283 verb tableMartin Roth
2013-12-12falco: fix usb port settingsDuncan Laurie
2013-12-12falco: Remove thermal thresholds that use CTDPDuncan Laurie
2013-12-12PIT: remove a comment that is incorrect.Ronald G. Minnich
2013-12-12snow: Fix the edid data structure definition so depthcharge works again.Gabe Black
2013-12-12peppy: RAM_ID + storage changes for next build.Shawn Nematbakhsh
2013-12-12peppy: Disable audio codec enable GPIO in S3 + S5.Shawn Nematbakhsh
2013-12-07peppy: Enable power limiting for thermal controlDuncan Laurie
2013-12-06butterfly: Fix build without ChromeOSKyösti Mälkki
2013-12-05google/link: use the new edid functions when in FUI modeRonald G. Minnich
2013-12-05peppy: Disable forced dev mode.Shawn Nematbakhsh
2013-12-05Fix Makefile to include all copies of the SPD sourcesDuncan Laurie
2013-12-03slippy/falco/peppy: Fix Chrome OS GPIO export in ACPIDuncan Laurie
2013-12-03haswell boards: Enable VIRTUAL_DEV_SWITCHDuncan Laurie
2013-12-02Add option to disable ChromeOSKyösti Mälkki
2013-12-02haswell: Update pei_data to match ref codeDuncan Laurie
2013-12-02falco: Update panel power sequence timingsDuncan Laurie
2013-12-02peppy: Port updates from slippy/falco boardsDuncan Laurie
2013-12-02peppy: Add 2GB DRAM configuration.Shawn Nematbakhsh
2013-12-02peppy: Re-enable EC software syncShawn Nematbakhsh
2013-12-02peppy: Update GPIO table + USB port map.Shawn Nematbakhsh
2013-12-02Add description to MAINBOARD_VENDOR string so it can be overriddenDuncan Laurie
2013-12-02peppy: Add an inverted input GPIO typeShawn Nematbakhsh
2013-12-02falco/slippy: Fix DMIC nid verb.Dylan Reid
2013-12-01slippy/falco/peppy: Fix SPD GPIO initialization.Aaron Durbin
2013-12-01Butterfly: Force DDR refresh rate to 2x.Shawn Nematbakhsh
2013-11-26lynxpoint: Add an inverted input GPIO typeDuncan Laurie
2013-11-26google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`Paul Menzel
2013-11-26slippy/falco: Re-enable EC software syncDuncan Laurie
2013-11-26falco: update verbs for ALC283Duncan Laurie
2013-11-25slippy: update verbs for ALC283Dylan Reid
2013-11-25peppy: Add Elipda DIMM SPDShawn Nematbakhsh
2013-11-25peppy: Initial mainboard commitShawn Nematbakhsh
2013-11-25falco: Update DIMM SPD tableDuncan Laurie
2013-11-25falco: Add panel power sequence timingsDuncan Laurie
2013-11-25falco: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25slippy: Add on-board devices and configure GPIO irq/wakeDuncan Laurie
2013-11-25falco: Add Elpida DIMM SPDDuncan Laurie
2013-11-25smbios: Add generic type41 write functionDuncan Laurie
2013-11-25haswell: update pei_data data structureAaron Durbin
2013-11-25falco: Initial mainboard commitDuncan Laurie
2013-11-25slippy: Enable EC SMIDuncan Laurie
2013-11-25lynxpoint: Change SerialIO device enable reporting to ACPIDuncan Laurie
2013-11-25slippy: Minor vboot related fixesDuncan Laurie
2013-11-25Fix int15 return value for mainboard oprom handlersDuncan Laurie
2013-11-25lynxpoint: Move ME lock down to ramstageDuncan Laurie
2013-11-25lynxpoint: export mem console pointer in ACPIAaron Durbin
2013-11-25Fix VGA option rom INT15 handlerStefan Reinauer
2013-11-25google/butterfly: Declare mrc_scrambler_seed_chk in cmos.layoutAlexandru Gagniuc
2013-11-24haswell: enable monotonic timerAaron Durbin
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
2013-11-24slippy: Clean up for easier portingDuncan Laurie
2013-11-24slippy: Run EC init as part of mainboard init stepDuncan Laurie
2013-11-24slippy: Update interrupt routingDuncan Laurie
2013-11-24slippy: set PWM valuesAaron Durbin
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
2013-11-24slippy: Add EC to the device treeDuncan Laurie
2013-11-24slippy: Update SPDDuncan Laurie
2013-11-24slippy: Add SPD data for on-board memoryDuncan Laurie
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
2013-11-24slippy: Add iSSD power sequencingDuncan Laurie
2013-11-24slippy: Initial mainboard commitDuncan Laurie
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
2013-09-11CBMEM: Drop parameter from cbmem_reinit()Kyösti Mälkki
2013-09-11CBMEM ARM: Prefer get_cbmem_table() over cbmem_late_set_table()Kyösti Mälkki
2013-09-11CBMEM: Add cbmem_late_set_table() and drop references to high_tables_baseKyösti Mälkki
2013-08-09intel/sandybridge intel/bd82x6x: remove explicit pcie config accessesKyösti Mälkki
2013-07-31Drop unused EXTERNAL_MRC_BLOBStefan Reinauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:39:39 +0000