summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2016-03-12google/oak: Configure SPI_LEVEL_ENABLE pin for rev5Yidi Lin
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
2016-03-12google/oak: add event logCC Ma
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
2016-03-12google/oak: Initialize DRAMPeter Kao
2016-03-12mt8173: add SPI NOR supportmtk05962
2016-03-10mainboards/google/auron_paine: add new portGeorg Wicherski
2016-03-08nyan: Fix timestamps and CBFS SPI integrationJulius Werner
2016-03-08mainboard/skylake: Include WRDD method in WIFI ACPI deviceDuncan Laurie
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
2016-02-29google/chell: Update DPTF configurationDuncan Laurie
2016-02-29google/chell: Update GPIOs for DVT2Duncan Laurie
2016-02-29mainboard/google/chell: provide configuration for all padsAaron Durbin
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
2016-02-12tegra132/210: Remove memlayout_vboot2.ldJulius Werner
2016-02-12link: Support native raminitVladimir Serbinenko
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
2016-02-12butterfly: Make configurable MRC vs non-MRC.Vladimir Serbinenko
2016-02-12stout: Support native raminitVladimir Serbinenko
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
2016-02-12mainboards: Drop remaining references to vboot indexesPatrick Georgi
2016-02-12Fix butterfly usb map.Vladimir Serbinenko
2016-02-12Move gpio.h to gpio.c on sandy and ivy.Vladimir Serbinenko
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
2016-02-10google/veyron_speedy: remove extraneous filePatrick Georgi
2016-02-09stout: Add native gfx initVladimir Serbinenko
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
2016-02-04google/glados: perform early init for CAR *stageAaron Durbin
2016-02-04google/chell: perform early init for CAR *stageAaron Durbin
2016-02-02Kconfig: indent with tabs, not spaces.Martin Roth
2016-01-31stout: Fix VGA PCIIDs.Vladimir Serbinenko
2016-01-29google/peppy/Kconfig: Move select MAINBOARD_DO_NATIVE_VGA_INITJean Lucas
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
2016-01-28soc/braswell: Fix for auto wake from S5Hannah Williams
2016-01-28soc/braswell: Fix issues found during static code analysisRavi Sarawadi
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
2016-01-28intel/cyan: Disable SD Card Detect Simulation in FSPHannah Williams
2016-01-28soc/braswell: Fix DSP clockfdurairx
2016-01-22google/oak: Configurate SD card detection pinYidi Lin
2016-01-22mediatek/mt8173: move rtc_boot() to romstageYidi Lin
2016-01-22google/oak: setup usb and configure I2C level shift pinBen Lok
2016-01-22google/oak: Configure backlight control pinsYH Huang
2016-01-22google/oak: configure audioKoro Chen
2016-01-22google/oak: Disable vboot mock data, now that I2C is functionalLiguo Zhang
2016-01-22google/oak: Enable MMU supportJimmy Huang
2016-01-22google/oak: Add support for verstageItamar
2016-01-22google/oak: Enable SPI supportLeilk Liu
2016-01-22Cyan: Update DPTF parameters for higher temperatureT.H.Lin
2016-01-22google/cyan: Add Wifi regulatory methodHannah Williams
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
2016-01-22intel/skylake: PL2 override changespchandri
2016-01-22google/veyron_*: Add dual-rank 2GB Hynix module to SDRAM configsDavid Hendricks
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
2016-01-21google/veyron_mickey: Update Hynix memory configurationLang Zhang
2016-01-21google/tidus: initial upstream migrationMatt DeVillier
2016-01-19google/chell: Adjust nuvoton 8825 button thresholds, add propertiesBenson Leung
2016-01-19google/chell: Modify DqsMapMike M Hsieh
2016-01-19google/chell: Add new memory part for DVT buildDuncan Laurie
2016-01-19google/chell: Set FSP params for min assertion widths and serirqDuncan Laurie
2016-01-19google/glados: Set FSP params for min assertion widths and serirqDuncan Laurie
2016-01-19google/chell: Reduce power-on keyboard backlight brightness to 25%Duncan Laurie
2016-01-19google/lars: Set Correct RCOMP Target for LARs EVT boardsSubrata Banik
2016-01-19google/lars: Enable eMMC HS400 modedavid
2016-01-19google/chell: Enable eMMC HS400 modeRyan Lin
2016-01-19google/lars: Enable SaGv featuredavid
2016-01-19google/chell: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-19google/lars: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-19google/lars: SPD changes for EVT boarddavid
2016-01-18google/glados: Enable FspSkipMpInit tokenBarnali Sarkar
2016-01-18google/lars: Enable ALS connected to ECdavid
2016-01-18google/lars: Add keyboard backlight supportdavid
2016-01-18google/chell: Add VR config settingsrobbie zhang
2016-01-18google/glados: Add VR config settingsrobbie zhang
2016-01-18google/glados: Add pull-ups on LPC address lines and setup PCH_WP earlyDuncan Laurie
2016-01-18google/chell: Minor updates from EVT and FSP 1.8.0Duncan Laurie
2016-01-18google/lars: Add VrConfig UPD parametersdavid
2016-01-18google/lars: Correct the output for crossystem wpsw_bootdavid
2016-01-18skylake boards: csme: add p2sb device and hecienabled devicetree variableArchana Patni
2016-01-17google/lars: Enable TPM PIRQdavid
2016-01-17google/lars: Enable 20K PU on LPC_LAD 0-3david
2016-01-17google/lars: Remove/Disable Wake on landavid
2016-01-16google/lars: add nhlt supportSubrata Banik
2016-01-16mainboard: Drop abuild.disabled files for Skylake boardsStefan Reinauer
2016-01-16google/lars: Add new configuration parametersdavid
2016-01-16google/lars: Disable SD 3.0 Controller [D30:F6]Subrata Banik
2016-01-15google/lars: Set DPTF critical temperature to 99Cdavid
2016-01-15google/lars: Disable kepler devicedavid
2016-01-15google/lars: Add support for MAX98357A audio amplifierSubrata Banik
2016-01-15google/lars: Update the PL1 value as TDPdavid
2016-01-15google/chell: Fix the P/N number for samsung K4E6E304EE-EGCFWisley
2016-01-15google/chell: add nhlt supportAaron Durbin
2016-01-15google/glados: add nhlt supportAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:53:40 +0000