summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2016-07-12google/gru: Enable coreboot read recovery eventShelley Chen
Enable reading of keyboard recovery host event from coreboot. BUG=None BRANCH=None TEST=esc+refresh+power combo and make sure you see recovery fw screen. Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905 Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357841 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15585 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: enable EC software syncShelley Chen
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO info. BUG=chrome-os-partner:54566 BRANCH=None TEST=1. apreset from ec console. Check for "VbEcSoftwareSync() check for RW update" string in ap console. 2. Run "ectool version" from OS to check that RO/RW version are different and that we're in RW: RO version: kevin_v1.1.4818-8243672 RW version: kevin_v1.1.4762-1957187 Firmware copy: RW 3. Run crossystem ecfw_act. check for RW return value. Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7 Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433 Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357811 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15584 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12Gale: Add LED support.Suresh Rajashekara
Reusing the LED patterns as it was defined for Storm/WW/Platform. BUG=b:29051518 TEST=After about 3 seconds of powering on the device different colors should be seen at the LED ring, depending on the state of the device. Alternatively, move the device to different states manually by appropriate actions (like dev mode, rec mode etc) and observe the colors. BRANCH=None Change-Id: I6f1b23fee15747a402e209a2d06f8794bbc2c5a1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: be1194b095d9a5cf269710c43a27a5afb3e87b29 Original-Change-Id: Ie82d4e148025c0040cdb26f53f028d9b4cbe2332 Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/355200 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/15572 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-10gru: include ram_code in coreboot tableVadim Bendebury
This is needed to ensure that the ram-code node is included in the device tree by depthcharge. BRANCH=none BUG=chrome-os-partner:54566 TEST=built updated firmware, booted on kevin into Linux shell, checked the device tree contents: localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code 0000000 00 00 00 01 0000004 localhost # Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354705 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15566 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-08mainboard/google/reef: Use device driver for DA7219 configurationDuncan Laurie
Use the device driver for DA7219 device configuration in the SSDT and remove the static copy in the DSDT. Tested on reef to ensure that the generated SSDT contents are equivalent to the current DSDT contents. Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15539 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08google/reef: Add Maxim98357a supportHarsha Priya
Adds Maxim98357a support for reef using the generic driver in drivers/generic/max98357 Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517e0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15435 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-07mainboard/google/reef: apply EVT board changesAaron Durbin
Based on the board revision apply the correct GPIO changes. The only differences are the addition of 2 peripheral wake signals and a dedicated peripheral reset line. BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961 BRANCH=None TEST=Built and tested on reef. Change-Id: I9cac82158e70e0af1b454ec4581c2e4622b95b4b Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15562 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07mainboard/google/reef: add board_id() supportAaron Durbin
The board build version is provided by the EC on reef. Provide the necessary functional support for coreboot to differentiate the board versions. BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961 BRANCH=None TEST=Built and tested on reef. Change-Id: I1b7e8b2f4142753cde736148ca9495bcc625f318 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15561 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07mainboard/google/reef: add memory SKU id supportAaron Durbin
While the proto boards didn't have a memory SKU notion the EVT boards do. Therefore, provide support for selecting the proper memory SKU information based on the memory id straps. This works on EVT boards because the pins used for the strapping weren't used on proto. However, internal pullups need to be enabled so that proto boards read the correct id. BUG=chrome-os-partner:54949 BRANCH=None TEST=Built and used on reef for memory config. Change-Id: I8653260e5d1b9adc83b78ea2770c683b72535e11 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15560 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07nyan: Avoid running early_mainboard_init twice in vboot contextPaul Kocialkowski
A call to early_mainboard_init is already present in verstage, thus it is only necessary to call it from romstage when not in vboot context. Change-Id: I2e0b5a369c5fb24efae4ac40d83a31f5cf4a078d Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15450 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-02google/reef: Add DA7219 support in acpiSathyanarayana Nujella
Add DA7219 support in acpi. DA7219 has advanced accessory detection functionality. Also add DA7219's AAD as a ACPI data node. Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45032 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15436 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-02google/reef: ACPI: Move touchpad to SSDT and remove TPMDuncan Laurie
Instantiate the touchpad using the drivers/i2c/generic device driver to generate the ACPI object in the SSDT. There is not currently a separate wake pin for this device, this will be added in EVT hardware. This was tested on the reef board by ensuring that the touchpad device continues to work in the OS. Also remove the LPC TPM from the DSDT as it is not present. Change-Id: I3151a28f628e66f63033398d6fab9fd8f5dfc37b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15481 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/google/reef: Configure DDI0, DDI1 HPD GPIO linesAbhay Kumar
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD. Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/15447 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-01mainboard/google/reef: Use common NHLTSaurabh Satija
Add ACPI NHLT table generation that the current hardware supports. Reef supports two audio codecs, Dialog 7219 for headsets and Maxim 98357 for speakers. Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15440 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29google/reef: set 20K PULLUP on SDCARD DATA/CLK/CMDFreddy Paul
SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines. Without this SDCARD will throw data read/write errors. BUG=chrome-os-partner:54676 TEST=Build and boot to OS. Verify SD card is detected and data read/write works well. Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15345 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-28google/reef: disable unused devicesJagadish Krishnamoorthy
BRANCH=none BUG=chrome-os-partner:54325, chrome-os-partner:54581 TEST=device off in devicetree should disable the device. Change-Id: I5dada06cba0eea8a30f297e3a6940a36b2ff40ee Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-24rockchip/rk3399: provide multiple SDRAM configurationsLin Huang
We want to be able to easily change SDRAM clock rate for debugging purposes. This patch adds configurations for 4 different clock rates. Same configs are used for all rk3399 boards at 200, 666 and 800 MHz. Kevin board does not run reliably at 666 MHz, an option for it is added to run at 300 MHz, this option is available to Kevin only. There is not much room left in the coreboot romstage section, this is why the config file for 928 MHz is being added with this patch but is not included in the code, one of the lower frequency options will have to be dropped for the higher frequency option to be added. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and gru. Verified that on Kevin the firmware reports starting up SDRAM at 300 MHz and on Gru at 800 MHz. Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1 Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353493 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15309 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add elog supportSimon Glass
Add code to start up elog. This uses the EC RTC to obtain the timestamp. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512 Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353822 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15306 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add get_developer_mode_switch()Simon Glass
Add this function and make it return 0, as there is no physical dev switch (at least I think this is what we are supposed to do). This is needed for elog to work, which is needed so we can test RTC properly. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages: elog_init() SF: Detected W25Q64 with sector size 0x1000, total 0x800000 elog_find_flash() FMAP: area RW_ELOG found @ 5d8000 (32768 bytes) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) ELOG: flash area invalid elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096) SF: Successfully erased 4096 bytes @ 0x5d8000 elog_prepare_empty() elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) elog_is_header_valid() elog_update_event_buffer_state() elog_is_buffer_clear(base=0x000000000031d670 size=4088) elog_is_area_valid() ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000] ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024 elog_add_event_raw(type=16) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11) ELOG: Event(16) added with size 11 elog_add_event_raw(type=17) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13) ELOG: Event(17) added with size 13 elog_add_event_raw(type=A0) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9) ELOG: Event(A0) added with size 9 elog_add_boot_reason: Logged dev mode boot I can't actually see the timestamp, but the EC traffic is visible. Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353821 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15305 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Show the current time on start-upSimon Glass
Display the current time from the EC. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) boot on gru and see output: Date: 1970-01-17 (Saturday) Time: 1:42:44 Then reboot ~10 seconds later and see output: Date: 1970-01-17 (Saturday) Time: 1:42:53 Change-Id: I4288efc56f00e47f7575d0379a44871351da6200 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351783 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Enable EC-based RTCSimon Glass
Obtain the real-time clock value from the EC on start-up and show the current time. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and EC clock set, boot on gru into Linux shell and check the firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:09:16 Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351781 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24google/lars: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was tested on a Chell mainboard since I lack a lars device. Change-Id: Ifba6fc6589ddd54f4c85e8858f17997fbb4b6176 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15316 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24google/glados: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was verified on a glados board by verifying the SSDT contents against what used to be in the DSDT. Change-Id: I710cbb8462d0fe695297102a64bec8e4212acc65 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15315 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-24google/chell: Move devices from mainboard.asl to devicetreeDuncan Laurie
Declare the mainboard attached devices in the devicetree and enable the provided device drivers by default to generate the ACPI objects for these devices. Then remove the static ACPI objects from the DSDT in mainboard.asl. This was verified by comparing the generated ACPI code in the SSDT to what was in mainboard.asl and ensuring the contents are functionally equivalent. Change-Id: I4725bbe2d47178568e3024fe3bb48cc80ff861c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15314 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-23intel/sandybridge: Fix builds with System Agent blobKyösti Mälkki
Broken with commit: 5c10abe nb/intel/sandybridge: increase MMCONF_BASE_ADDRESS Available sandybridge/systemagent-r6.bin has MMCONF hard-coded at some places and samsung/lumpy fails at boot here: CBFS: Locating 'mrc.bin' CBFS: Found @ offset 9fec0 size 2fc94 System Agent: Starting up... System Agent: Initializing These are the last lines as captured over USB debug. Change-Id: I441847f0e71a5e1be9c8ef6a04a81eb7bdd8a6d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15328 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23google/reef: Update chromeos.fmd fileFurquan Shaikh
1. Mark 256KiB at end of BIOS region as unusable BIOS region is memory-mapped just below 4GiB, however last 256KiB is unusable. Mark it accordingly in fmd file. 2. Use up holes in RW region for RW_A and RW_B. 3. Fill up holes in RO with UNUSED regions. BUG=chrome-os-partner:54672 Change-Id: I5facc566bb70d950522e12228b0631ddf00ac63d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15313 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23rockchip/rk3399: correct sdram inc file DENALI_CTL_217_DATA valueLin Huang
for per cs training, there should be more cycles to switch delay line. so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/352953 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23gru: kevin: initialize cr50 SPI interfaceVadim Bendebury
Set up the pins and initialize the driver. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the cr50. Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349852 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15296 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-22mainboard: Remove use of IFD_BIOS_START/IFD_BIOS_ENDFurquan Shaikh
BUG=chrome-os-partner:54563 Change-Id: If07710333cbb84ce70d6d4fa40602a74c898c08a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15293 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21rockchip: kevin/gru: Slow memory down to 300 MHzDouglas Anderson
At the higher speeds stressapptest shows memory errors. We don't want to track down random problems due to simple memory corruption, so slow memory back down to 300 MHz until someone figures out how to make it faster without sacrificing reliability. BRANCH=None BUG=chrome-os-partner:54144 TEST=stressapptest -M 1024 -s 240 Change-Id: I2417f93f65b1491a028a63ce563ed7dd7831becc Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I02182b25e677e27e8541445938f9da9ae9553fa6 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/350480 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15120 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass poweroff gpio parameter to BL31Lin Huang
To support gpio power off SOC, we need to pass the power off gpio parameter to BL31. Gru reuse tsadc overtemp pin as power off gpio, so need to iomux to gpio function when use gpio power off function, either in bl31 or depthcharge. BRANCH=None BUG=chrome-os-partner:53448 TEST=Build gru Change-Id: Ibfe64042f39f6df1b87536b50fe432859bf74426 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: Ie7a1bbea4a12753f0abac7a9142f2e032686ce31 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349703 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15119 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass reset gpio parameter to BL31Lin Huang
To support gpio reset SOC, we need to pass the reset gpio parameter to BL31. Note: request BL31 have supported this function. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I182cff11ce6f5dc3354db0dc053c128b813acf9f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I8283596565d552b1f3db31c28621a1601c226999 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349702 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15118 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-21google/reef: Keep ISH enabled for nowFurquan Shaikh
Disabling ISH causes resets in FSP which leads to hang. This should be fixed in a later stepping. Until then keep ISH enabled. BUG=chrome-os-partner:54033 Change-Id: Id9cb276eed8d027ab6d2e81a5ec962bc730c1ff5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15142 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21google/reef: Add ACPI code for trackpadFreddy Paul
This patch enlists ELAN trackpad on I2C4 for reef board. BUG=None TEST=Build and boot to OS. Ensure ELAN trackpad is working with ELAN trackpad driver enabled in kernel. Change-Id: I788600f16dea9fac0e089cb82ccfc38a960157f9 Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15213 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21mb/google: remove superfluous header includes in bdw chromeboxesMatt DeVillier
Change-Id: I71443c7547a113bf9b64d48fe5a85c6e2302c8aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-17google/reef: Update EMMC DLL setting in all modeZhao, Lijian
Update tuned DLL setting on all other mode, including SDR12 SDR25 and DDR50. Change-Id: I1eb85ac6080fd78f63816d3fa9ef482484bd9f94 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/15210 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-16google/reef: Add NVRAM and LEGACY sections to chromeos.fmdFurquan Shaikh
Now that the flash size is increased to 16MiB, add RW_NVRAM and RW_LEGACY sections to chromeos.fmd file. BUG=chrome-os-partner:54390 Change-Id: I6c79d35295c4bc774f05f8045ac920474d7a791f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15192 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-16google/reef: Update flash size to 16MiBFurquan Shaikh
Use entire 16MiB flash size on reef. Adjust SIGN_CSE region accordingly. BUG=chrome-os-partner:54390 Change-Id: I94de509bdb2aa94625814123bf4d9758bfa37fc9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15191 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-16mb/google: Remove whitespace from devicetree on bdw boxes.Prabal Saha
Change-Id: I189836282b4ad084fbbb74199b24505f5e141b60 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15207 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins)
2016-06-16google/rikku: Upstream Acer Chromebox CXI2Matt DeVillier
Migrate google/rikku (Acer Chromebox CXI2) from Chromium tree to upstream, using google/guado as a baseline. original source: branch firmware-rikku-6301.110.B commit 2e71207 [CHERRY-PICK: broadwell: Update to microcode 0x1F] TEST=built and booted Linux on rikku with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.bin) external reference code (refcode.elf) Change-Id: Iba618a0b2cf2d613f6429b3e7606e0b47fa97a4d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/12802 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-14google/reef: Correct use of globalnvs.aslFurquan Shaikh
Use the correct globalnvs.asl from apollolake. BUG=chrome-os-partner:54342 Change-Id: I1a5b8f61c540bdb2668b532f032350d8e4d48010 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-14google/reef: Update EMMC DLL settingsZhao, Lijian
Update EMMC DLL setting for reef board, after that system can boot up into EMMC successfully. BUG=chrome-os-partner:54228 TEST=Boot up into EMMC and check with Rootdev Change-Id: I614cd624dce9069c5565599a955f87906bcea53b Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/15156 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-12mt8173: dram: Add more sample points to improve dram timing marginPH Hsu
BRANCH=none BUG=chrome-os-partner:52959 TEST=verified on elm-EVT SKU1/SKU2, Oak-rev5 2GB/4GB models. Change-Id: I228c629d9a3d6cd8fc5c4e8ba24cc52d5283b4e6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3c19e7d Original-Change-Id: I22356aa8d196c4c126742cfc7e85cc693acd9b39 Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347716 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15115 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12oak: Select VBOOT_EC_SLOW_UPDATE Kconfig optionJulius Werner
All current Oak boards have PD chips with update speeds that range from slow (Oak) to "OMG it's so awfully slow I could make a cup of coffee and it would still not be done" (Elm). Set the flag that enables the "Your system is applying a critical update. Please don't turn it off." message on EC software sync so that our users don't accidentally carry it back to the store and demand a refund while it's still not done booting. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak in normal mode with a new EC-RW image. Confirmed that I saw the magic screen. Change-Id: I000eab36d26b61b25d1f0da505f02ced15457255 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 274644b Original-Change-Id: I64ba698985d5fbcf2b94115df72b70a5319106ac Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348787 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15114 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the board can skip display initialization in the normal boot path. It's name is a left-over from a time when this could only happen by avoiding loading the VGA option ROM on x86 devices. Now we have other boards that can skip their native display initialization paths too, and the effect to vboot is the same. (Really, we should rename oprom_matters and oprom_loaded to display_skippable and display_initialized or something, but I don't think that's worth the amount of repositories this would need to touch.) The only effect this still has in today's vboot is to reboot and explicitly request display initialization for EC software sync on VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still, the vboot flag just declares the capability (for skipping display init), and it should be set correctly regardless of whether that actually makes a difference on a given platform (right now). This patch updates all boards/SoCs that have a conditional path based on display_init_required() accordingly. BRANCH=None BUG=chrome-os-partner:51145 TEST=Booted Oak, confirmed that there's no notable boot time impact. Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c242f7 Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/348786 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-09skylake: Move I2C bus configuration to separate structureDuncan Laurie
Move the existing I2C voltage configuration variable into a new structure that is equivalent, similar to how USB ports are configured. This is to make room for additional I2C configuration options like bus speed and whether to enable the bus in early boot which are coming in a subsequent commit. The affected mainboards are updated in this commit so it will build. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e Reviewed-on: https://review.coreboot.org/15104 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-09skylake: gpio: Add support for setting 1.8V tolerantDuncan Laurie
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses that are at 1.8V. This is currently done by passing in a value to FSP but it is needed earlier than FSP if the I2C bus is used in verstage. This does not remove the need for the FSP input parameter, that is still required so FSP doesn't disable what has been set in coreboot. The mainboards that are affected are updated in this commit. This was tested by exercising I2C transactions to the 1.8V codec while in verstage on the google/chell mainboard. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c Reviewed-on: https://review.coreboot.org/15103 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: enable EC SPI interfaceVadim Bendebury
This configures and enables SPI interface #5 used for EC communications on Gru/Kevin. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the appropriate depthcharge change it is possible to trigger booting Chrome OS from the SD card by pressing '^U' on Gru keyboard at the right time. Change-Id: I5304bf47e030c0b9b7794752f30ffdca6c03a4f4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b5cc177 Original-Change-Id: I99883daa60562ccddfaeb858c1957d497f05a501 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346632 Reviewed-on: https://review.coreboot.org/15032 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08veyron: Add exception_init() to romstageJulius Werner
I'm not even sure how this slipped through... looks like it had never been there in the first place. Anyway, on ARM exceptions should always be reinitialized in all stages to make sure the handlers are still around (especially in an OVERLAP_VERSTAGE_ROMSTAGE board like this one). Change-Id: Ic74ea1448d63b363f2ed59d9e2529971b3d32d9a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-08gru: kevin: define GPIOs used on both platformsVadim Bendebury
The same GPIOs are used on both platforms, definitions are added an a new .h to make it easier to re-use them across the code. BRANCH=none BUG=chrome-os-partner:51537 TEST=panel backlight still enabled on Gru as before. The rest of the GPIOs are used in the upcoming patches. Change-Id: If06f4b33720ab4bf098d23fb91322bba23fe6e90 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c587880 Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346219 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15029 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08mainboard/google/reef: Configure sd card pinsJagadish Krishnamoorthy
Since the sd card cmd, data, cd lines are configured as native mode, allow the native controller to control the termination. Configure SDCARD_CLK_FB which is used for calibrating the timing of the actual clock buffer. BUG==chrome-os-partner:53747 TEST=verify sd card detection Change-Id: I56611826afb4fb32fefa7f1e4ba19ca4f30ba578 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://chromium-review.googlesource.com/348377 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15096 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-07google/reef: Add asl code to enable google ChromeECShaunak Saha
This patch adds asl code to include support for Google ChromeEC. We need this to show the battery icon and notifications like charger connect/disconnect etc. BUG = 53096 TEST = Plug/Unplug AC Adapter multiple times and make sure the battery connected is charging properly. Change-Id: I06f48eda894418514c8ed0136500fff0efd12a35 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15069 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-06-07Kevin/Gru : Update Board ID table.jongpil19.jung
Add board id table as kevin/gru configuration. BUG=chrome-os-partner:53519 BRANCH=chromeos-2016.02 TEST=check boot on Kevin board. Change-Id: I30c16916f3cda0ac88d2ce5a922e936a405fcc89 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 16c7b5486befd73c3e31624970ba1c97e526676f Original-Change-Id: Ib69ed9dad8e1a9e08717545c6be19a90e0298c43 Original-Signed-off-by: jongpil19.jung <jongpil19.jung@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345736 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15028 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-02google/reef: Select UART_FOR_CONSOLE for reefFurquan Shaikh
Change-Id: I714af8ab552dc1923a1b64e0c502d6c7b96dd444 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-02Gale board: Move TPM setup function to verstage.cKan Yan
TPM should be only be reset once in verstage. BUG=chrome-os-partner:51096 TEST=Depthcharge no longer shows TPM error. BRANCH=None Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Commit-Id: 911bdaa83a05fa5c8ea82656be0ddc74e19064c3 Original-Change-Id: I52ee6f2c2953e95d617d16f75c8831ecf4f014f9 Original-Reviewed-on: https://chromium-review.googlesource.com/343537 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: I8047b7ba44c604d97a662dbf400efc9eea2c7719 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14845 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-06-01mainboard/google/reef: Add IFWI region to chromeos.fmdFurquan Shaikh
IFWI region holds different components required for booting including CSE firmware, PMC firmware, CPU microcode as well as the bootblock. Add section for IFWI in chromeos.fmd Change-Id: Ic97980ff222ad7cbd7a2970417b79150256a7a16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15000 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31google/ninja: Upstream AOpen Chromebox CommericalMatt DeVillier
Migrate google/ninja (AOpen Chromebox Commerical) from Chromium tree to upstream, using google/rambi as a reference. original source: branch firmware-ninja-5216.383.B commit 582a393 [Ninja, Sumo: Add SPD source for Hynix H5TC4G63CFR-PBA] TEST=built and booted Linux on ninja with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.elf) external reference code (refcode.elf) Change-Id: I0f1892c24c08fa2d53185b2cf8b6f5a9001b2397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/14950 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-30reef: Remove si-all region from chromeos.fmdFurquan Shaikh
This matches the change in depthcharge fmap.dts to remove si-all region and mark si-desc as ifd. CQ-DEPEND=CL:347986 BUG=chrome-os-partner:53689 BRANCH=None TEST=Compiles successfully Change-Id: Ic7ed94fcdfb9a79bd6ceb960830f67678b0291b6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14990 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27mainboard/google/reef: increase BIOS region sizeAaron Durbin
An updated descriptor expands the BIOS region while descreasing the 'device expansion region' utilized by the CSE. Update the end region marker to reflect this new size as well as the chromeos.fmd file which needs to be adjusted for logical boot parition 2 requirement which resides halfway through the BIOS region. The GBB was moved and shunk to accommodate the change. Change-Id: I7baa5282d7c608af648b5773c4dfa123060a6e45 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14974 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-27google/reef: Sync chromeos.fmd with fmap.dts and fix offsetsFurquan Shaikh
CQ-DEPEND=CL:347460 BUG=chrome-os-partner:53689 BRANCH=None TEST="emerge-reef chromeos-bootimage" completes without error Change-Id: Ic954e29628423937604772a8d2d0414954e6ba3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/347441 Commit-Ready: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/14975 Tested-by: build bot (Jenkins)
2016-05-27mainboard/google/reef: support verstageAaron Durbin
The chromeos.c suport needs to be linked into verstage so it will link. Change-Id: If85e232a3721443edfbbd278b32f72302f13f3a8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14973 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
If booting from sdcard/usb, kernel can't recognize the /dev/mmcblk0. Before kernel find it's root cause, we add this workaround patch to enable clk for emmc. BRANCH=none BUG=chrome-os-partner:52873 TEST=boot from sdcard and check the /dev/mmcblk0 exists Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85 Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341632 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14856 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz, that is GPLL(594MHz) divided by 3. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard TEST=LoadKernel faster, more than twice as I measured manually. Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2 Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339152 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14855 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18ec/google/chromeec/acpi: Add MKBP supportGwendal Grignou
Allow EC to send an interrupt using ACPI SMI when a MKBP event is available. This will be used by the sensor stack. Update all ACPI branch except those without sensors with: for i in $(find . -name ec.h -exec grep -l MAINBOARD_EC_SCI_EVENTS {} \+ | cut -d '/' -f 2 | grep -v -e cyan -e lars); do echo $i cd $i git diff ../lars/ec.h | patch -p 5 cd - done BUG=b:27849483 BRANCH=none TEST=Compile on Samus. Tested in Cyan branch. Change-Id: I4766d1d56c3b075bb2990b6d6f59b28c91415776 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: d3b9f76a26397ff619f630c5e3d043a7be1a5890 Original-Change-Id: I56c46ee17baee109b9b778982ab35542084cbd69 Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/342364 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14854 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-05-18rk3399: set proper configuration of SDMMC interfaceVadim Bendebury
For proper interface operation the drive strength on all pins is set to 8 mA and all pull ups/pull downs disabled, this matches the current kernel configuration. BRANCH=none BUG=chrome-os-partner:53257 TEST=it is possible to boot Chrome OS on Gru from various micro SD cards which were failing to boot before. Change-Id: Ie43e52a52cd0513d48d0ecc8ac02fbb100baf9a4 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 6bb0549ed728ac3c5faab6cbe16e2487400e67ed Original-Change-Id: I5180537d3ceb74a9a2f7b3982ca94d3e2daf0369 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344491 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14853 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18gru: set correct gpio for SD card detectVadim Bendebury
The only outlier at this time is Kevin rev 0, treat it specially, the rest of the targets use the same GPIO. BRANCH=none BUG=none TEST=gru still boots off SD card just fine Change-Id: Ic603093a990d27166b16175db3303f155b4775aa Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5788c5add1d1f803e7b22fb53215b6003ac04d03 Original-Change-Id: Ic5183f08dd1119f9588f243bd9e9c080d84687f9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344151 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14851 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18Gru: support 4GB sdram on gruLin Huang
now we use 4GB sdram on gru board, enable it. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot from kevin board Change-Id: Icc483a8ba91c5deea85e6e4009a8a132851b1853 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: efa94aee02bedf51d73c91059b06afcbb1320282 Original-Change-Id: I26f77ff4ad9b2aa35ab5ff50f23984796f4f06bc Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342585 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14850 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-17mainboard/google/reef: add first pass of full pad configurationAaron Durbin
This is an initial stab of configuring the reef pads. Change-Id: I8d8060745af6fbada268c6c6f3492b985ddf9eb8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14831 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Tested-by: build bot (Jenkins)
2016-05-13mainboard/google: add reef reference boardAaron Durbin
This adds the initial scaffolding for the reef reference board. One big thing missing is the GPIO configuration. Change-Id: I8e2d275df296bb397bb33dbd0c66fc87c82ff10f Signed-off-by: Aaron Durbni <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14798 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-11lib: remove FLASHMAP_OFFSET config variableAaron Durbin
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define. Those 2 values are not consistent. Therefore, remove the Kconfig variable and defer to the #define generated by fmdtool. Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14765 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-10google/gale: use if (IS_ENABLED()) over #ifdefPatrick Georgi
Change-Id: I9047251608fbb92180f2e92d19fd128c5f1ef399 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14754 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10google/gale: mark RW_LEGACY to carry CBFSPatrick Georgi
Change-Id: I9422d6ca2601dcc6e3d7c4a2c413c32015c10e00 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14753 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10soc/qualcomm/ipq40xx: Enable crashdump handlingVaradarajan Narayanan
Clear the crash dump cookie set by SBL to indicate that it is a normal reset. Inform DDR image of the entrypoint for SDI image to be preserved in OCIMEM which will be needed during watchdog resets. BUG=chrome-os-partner:49249 TEST=DDR image is able to fetch the entry point address BRANCH=none Change-Id: I3e6e4a108585bb257e3ad02956c420acbcb2554e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd726256a5ae89672810b57e1d2a7a9287f60627 Original-Change-Id: Id6e09516209f47c3ea8fa3d8d90440789b395660 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333321 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14679 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10soc/qualcomm/ipq40xx: Add support for BLSP QUP I2CVaradarajan Narayanan
Able to talk to the TPM device and the commands seem to succeed. BUG=chrome-os-partner:49249 chrome-os-partner:49250 TEST=All commands to the TPM succeed BRANCH=none Original-Commit-Id: c13900108f524c8422c38dee88469c8bfe24d0bd Original-Change-Id: Ie8c3c1ab1290cd8d7e6ddd1ae22f765c7be81019 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333314 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> squashed: soc/qualcomm/ipq40xx: Add support for BLSP QUP SPI - Enable BLSP SPI driver for ipq40xx - supports only FIFO mode BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Original-Commit-Id: 0714025975854dd048d35fe602824ead4c7d94e9 Original-Change-Id: If809b0fdf7d6c9405db6fd3747a3774c00ea9870 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333303 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ia518af5bfc782b08a0883ac93224d476d07e2426 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10google/gale: Remove some unwanted codeVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=Compiles and boots BRANCH=none Original-Commit-Id: 96a125f99af3eaa8931563fa74ccef8dd997f3ca Original-Change-Id: Iebfe7429c400e7119510a51c3124d432f00af76d Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333319 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> squashed: soc/qualcomm/ipq40xx: Add function to reset TPM BUG=chrome-os-partner:49249 TEST=Able to read TPM registers BRANCH=none Original-Commit-Id: 9df3e9dfe61382143394a58a3a927c05a875b377 Original-Change-Id: I38732acc4418c94b88a430ba697db4e3b145c341 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333317 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ifc8df3b7e231eef944efec3a6f973b402c11bcaf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14674 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10google/gale: Enable WinBond SPI flash supportVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=Able to read content from SPI NOR, with boards having WinBond SPI Flash BRANCH=none Change-Id: I104a750aa6545264003cd785c347cb9354e59b5c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b933c7eeb133201877596c39cf4b3c263aca5498 Original-Change-Id: Ida767dab3abe72def2388e5eeb41eeb575205528 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339872 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14672 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10soc/qualcomm/ipq40xx: Map OCIMEMVaradarajan Narayanan
DDR binary runs from here BUG=chrome-os-partner:49249 TEST=Boots and DDR seems to be usable BRANCH=none Change-Id: I6111dddcabf05e5cb84ee9ebcc1803addb1e91cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7baf2079845964a150f51d558b396a1a9b0dc0a3 Original-Change-Id: I1d7230b229db3abfb73e6d8f9ca085650e6abec8 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333313 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: Remove NAND initVaradarajan Narayanan
This is stale code from ipq806x, n/a for ipq40xx. Hence removing it. BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: I2ac73677f77d4bfbc70f56c73a661cc2c22dd384 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2f9796588648bc477f118282aad89037f0577f23 Original-Change-Id: I8bcf928ee23ac24a21b0e633e207354ea9fa0511 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333299 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14664 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: Implement resetVaradarajan Narayanan
Implement reset using PSHOLD and remove watchdog based reset not needed for ipx40xx. BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ic2fa0e7676604f36a99750b4bda53195199ebc69 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 65c8b9dd633f0d402cad7d609563c8aac9bf5115 Original-Change-Id: I8f0ea3c1b71e86a7ca733965ecbec6954a52f6e3 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333298 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14750 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: Implement resetVaradarajan Narayanan
Implement reset using PSHOLD and remove watchdog based reset not needed for ipx40xx. BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Change-Id: Ibd3f9958682ed2e85e778976df3a8e124a7441fd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 65c8b9dd633f0d402cad7d609563c8aac9bf5115 Original-Change-Id: I8f0ea3c1b71e86a7ca733965ecbec6954a52f6e3 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333298 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14663 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: Enable Giga Device SPI flash supportVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=Able to read content from SPI NOR, with boards having Giga Device SPI Flash BRANCH=none Change-Id: I67dc981a8c0270d55b01bdc4506139cccd8e90a7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 417701816e8a298ba999d2c2d0d058cf7b54fb6f Original-Change-Id: Id09ef68b13c53a2ab44f77c12dad39b505c81071 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333320 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14661 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10soc/qualcomm/ipq40xx: Return NULL for cbmem_top if DRAM is not initializedVaradarajan Narayanan
DRAM initialization on gale requires ipq blobs to be loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is initialized and contains selected region info, else it falls back to vboot work buffer. Since cbmem_find calls into cbmem_top to identify the location of cbmem area, board/chipset is expected to return NULL until the backing store is ready, which in this case until DRAM is initialized in romstage, return NULL for cbmem_top. BUG=chrome-os-partner:49249 TEST=Able to compile and boot to depthcharge. Doesn't crash in imd_handle_init_partial_recovery BRANCH=none Change-Id: Iaac24252ee4fb9f59d767730bf9dd68baa42a68f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4849c15dee2d3782ede4ee4157e432bd4d5602f0 Original-Change-Id: I3722b7ab5a6585a250138c828eb3d7919b0c1178 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/335425 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14660 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: set the correct GPIOs for recovery and dev.Kan Yan
BUG=chrome-os-partner:49249 TEST=Recovery swich functions correctly. BRANCH=none Change-Id: I88bb973a82133d8bab6b79fd49c8052f64937473 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c8d319f65ee75e3c01e63c44249c7c7871a77518 Original-Change-Id: I2f62f2549c519f52c12c351dcb881a088671934a Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/334414 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10soc/qualcomm/ipq40xx: Update memory map to align to ipq40xxVaradarajan Narayanan
Update the memory to map to align with the internal memory region map of IPQ40XX BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Original-Commit-Id: e33712a729ef9831508c2e9aae81d0b32495b681 Original-Change-Id: Iba1c5281a2fbda4ab96126676b901ba71f6b28e0 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333295 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> squashed: soc/qualcomm/ipq40xx: Update DRAM address ranges BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Original-Commit-Id: 9150c125cb82f8dccb1347d898106703d85a5192 Original-Change-Id: Ic48d3e3f46a7c13a009a5cbed20984bd253eb85b Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333296 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: Iea40484751a1c0439ed511319ef09a0254eba757 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14654 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10google/gale: Initial commit for Gale board supportVaradarajan Narayanan
Copy 'storm' files as a template BUG=chrome-os-partner:49249 TEST=None. Initial code. Not sure if it will even compile BRANCH=none Original-Commit-Id: 4bfabf22cb33ac2aacff0ebeed54655664505148 Original-Change-Id: I94e361911b89c5159b99f3d00efbcda94f763e71 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/333177 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> squashed: google/gale: Remove unwanted config option 2016.02 doesn't seem to like CONSOLE_CBMEM_DUMP_TO_UART BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Original-Commit-Id: 44b91a8f83515936156206f9f273e0e5c62c3f17 Original-Change-Id: I9294ff602a05e4c9573fee3b9b51f9cc5305e192 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333302 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> google/gale: Update ipq806x/storm references Since the files were taken from ipq806x/storm as template. Update those references to reflect ipq40xx/gale. BUG=chrome-os-partner:49249 TEST=None. Initial code not sure if it will even compile BRANCH=none Original-Commit-Id: fa5962b757dbb6cc9e1e6d1e33e1e09ec6cb4cd2 Original-Change-Id: Ia330367a0547ac4306ef2514dc1305e2d65f80e4 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333292 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> google/gale: Update fill_lb_gpios for new scheme This updates fill_lb_gpios to follow the new scheme introduced in CL:337176. BUG=none BRANCH=none TEST=chromeos.c compiles successfully for gale Original-Commit-Id: 635d7fd71d91552bd7470faeb5637ba1a727f940 Original-Change-Id: I6f98325918b350645b9c19b71125bc12a54953ab Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/338651 google/gale: Add '.fmd' file BUG=chrome-os-partner:49249 TEST=None. Initial code. Not sure if it will even compile BRANCH=none Original-Commit-Id: 474de31f7ed0adbe54251ca363e685019091b4e7 Original-Change-Id: I4019b110af676090e8751b315dadc5b601a56178 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333291 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Change-Id: Iad8e010371f3b9b92ab26eee4ba35c4f16d3732c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14642 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: kevin: use board version specific SD detect GPIO pinVadim Bendebury
This change reflects Kevin schematics differences, Gru will have to be addressed separately. BRANCH=None BUG=None TEST=the code still works fine on Kevin proto 1. Change-Id: Iecae0e82e6bd4d185b49587b6053dcef8ad2162d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e821bbebe902a293b1e78cdd868f6bf3548ddd30 Original-Change-Id: Icd606285aeca1e19189f5e3d24c09b376942708b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340429 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14728 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: select 1.8V as gpio2ab io domainLin Huang
On kevin board, both the gpio2ab's io domain APIO2_VDDPST and APIO2_VDD are 1.8V. So gpio2ab can only output 1.8V. BRANCH=none BUG=chrome-os-partner:52510 TEST=Apply this patch, CPU1_SDIO_PWREN(GPIO2_A2) can output 1.8V Change-Id: Iefe58cf5ad83a8e79916ad177d148c1036283668 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4afee265f3f31c1defee08cb89ab3e45ff8d1a Original-Change-Id: I0216c8efb7ef9256b878adeeee0a52335bf69f93 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337194 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: add board nameVadim Bendebury
Gru is the common name of a set of coreboot boards, each of them has the config option BOARD_GOOGLE_GRU enabled. Now we need to add the actual board called Gru to the set. Let's rename the common config option to BOARD_GOOGLE_GRU_COMMON and use BOARD_GOOGLE_GRU for the actual board. BRANCH=none BUG=none TEST=with corresponding depthcharge and configuration space changes it is possible to build the Gru board which boots the kernel using the proper compatibility string of google,gru-rev0 Change-Id: I363d4b690b7549f50ed75d77b56e6a1e1d17b60f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 327ecc0de20ac0b93ec3cd28ef398393d4ea7c42 Original-Change-Id: Ia43278225c2d32d2af37193a77ea792551c9f8d9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340793 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14724 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: Determine Board ID based on the input voltage of ADC1Vadim Bendebury
The Board ID on the Gru family of boards is determined by reading the voltage from a resistor divider, each hardware revision is supposed to have a unique resistor ratio, which allows to distinctly tell between different Board ID. While the long time approach to mapping resistor ratios (and voltages) into Board ID remains under discussion, we know for sure the values for Proto 1 and Proto 2. Let's just use them for now. Since Board ID can be queried multiple times during boot, ideally it should be read once and placed in the coreboot table to be available to all coreboot stages. For now we just cache it so that at least during the same stage the ADC has to run only once. BRANCH=None BUG=chrome-os-partner:51537 TEST=verified that the voltage reading on Proto 1 is as expected, and Board ID 0 is reported. Change-Id: I94bc7fc235dae4155feb6ca35b5ef0ab20c3ec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bb4064d0af8174b6ae247cdad9378b7f4e5f22ba Original-Change-Id: I105ea97f8862b5707b582904c6f2e3e9406a0f07 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340428 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/veyron_mickey: Increase RO CBFS size by 512 KbDavid Hendricks
This change increases the size of RO CBFS by 512 Kb to accommodate new images added to the INSERT screen. (This does the same thing as Daisuke's CL:338095, but for Mickey) BUG=chromium:604412 BRANCH=none CQ-DEPEND=CL:339495,CL:339511 TEST=emerge-veyron_mickey chromeos-bootimage Change-Id: Ib58247b2c89e436c6013f3ad59ad1cb80ba14964 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 897499bea5bd4003466ca7ebabff597e87da2e45 Original-Change-Id: I2cee79b2476fcb5bfb91bf9779f1fe11b4361612 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/339542 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/14721 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: power up SD cardVadim Bendebury
Make sure SD card is powered up properly. Please refer to TRM V0.3 Part1 Page 324 for sdmmc pinmux. BRANCH=none BUG=chrome-os-partner:51537 TEST=With other patches, boot into chromeos prompt Change-Id: Ib53b05c1fce851ca7cbcc2207fce2dce3b1bfe9a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d37e688a458749e331a50c2ebf2018cba6629823 Original-Change-Id: I9f67c0bc16ddefa5ebe52a10c6d9e54194828a89 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/337192 Reviewed-on: https://review.coreboot.org/14718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 12:48:03 +0000