summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
2017-06-12soc/baytrail: fix scope for I2C ACPI devicesMatt DeVillier
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
2017-06-09google/chell: add board-specific USB port infoMatt DeVillier
2017-06-09mb/google/soraka: Update UF camera i2c addressNaresh G Solanki
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
2017-06-08device/Kconfig: Put gfx init methods into a `choice`Nico Huber
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
2017-06-07mainboard/google/poppy: Add support for ELAN deviceFurquan Shaikh
2017-06-05google/reef: Add coralPatrick Georgi
2017-06-04google/rambi: add board-specific USB port infoMatt DeVillier
2017-06-04google/jecht: add board-specific USB port infoMatt DeVillier
2017-06-04google/auron: add board-specific USB port infoMatt DeVillier
2017-06-04google/slippy: populate PEI SPD data for all channelsMatt DeVillier
2017-06-04google/parrot: make chromeos.c compilation conditional on CONFIG_CHROMEOSMatt DeVillier
2017-06-04google/lulu: enable SATA device to sleep in S0Matt DeVillier
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie
2017-05-31mb/google/eve: Add power controls to touchscreen deviceDuncan Laurie
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
2017-05-27lib/spd_bin: make SMBus SPD addresses an inputAaron Durbin
2017-05-27google/fizz: Set GPP_C2 to NCShelley Chen
2017-05-26mainboard/google/poppy: Add PowerResource for touchscreen deviceFurquan Shaikh
2017-05-25mainboard/google/eve: Update VR config settingsV Sowmya
2017-05-24mb/google/soraka: Update camera sensor for sorakaNaresh G Solanki
2017-05-24mb/google/poppy: Update SPD dataNaresh G Solanki
2017-05-24soc/marvell/bg4cd: remove cosmos mainboard and bg4cd socAaron Durbin
2017-05-19mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCFFurquan Shaikh
2017-05-19mainboard/google/poppy: Fix SPD for micron MT52L256M64D2PP-107Furquan Shaikh
2017-05-18google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-17mb/google/eve: Remove FPC device from SPI1Duncan Laurie
2017-05-17mb/google/eve: Update touchpad I2C timingDuncan Laurie
2017-05-17mainboard/google/poppy/variants/soraka: Enable H1 I2C TPMFurquan Shaikh
2017-05-17mainboard/google/poppy: Correct I2C bus number for TPMFurquan Shaikh
2017-05-17google/fizz: Configure SATAXPCIe GPIOs to use native functionShelley Chen
2017-05-12mainboard/google/reef: Config needed GPIO for pull-up WALijian Zhao
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
2017-05-09google/sand: Add keyboard backlight supportKatherine Hsieh
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
2017-05-05mb/google/poppy: Add eMMC as thermal sensorSumeet Pawnikar
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
2017-04-29rowan: Fix default test HWID.Patrick Berny
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
2017-04-27mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c deviceWei-Ning Huang
2017-04-27google/poppy: Enable PD MCU deviceShamile Khan
2017-04-27google/fizz: Configure HDMI HPD to use native functionShelley Chen
2017-04-27google/fizz: Enable SATA on port 1Shelley Chen
2017-04-25google/gru: change the sd power sequenceCaesar Wang
2017-04-25google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panelDaniel Kurtz
2017-04-25mediatek/mt8173: Add support for Dual DSI outputJitao Shi
2017-04-25google/oak: Use edid_set_framebuffer_bits_per_pixelDaniel Kurtz
2017-04-24google/oak: Support cr50 over I2C on rowanVadim Bendebury
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
2017-04-24mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
2017-04-24mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
2017-04-24mainboard/google/poppy: use intel common tis_plat_irq_status()Aaron Durbin
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
2017-04-24mb/google/fizz: Set lid status as openNaresh G Solanki
2017-04-24mb/google/fizz: Configure PCI root portNaresh G Solanki
2017-04-24google/fizz: Configure memoryShelley Chen
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
2017-04-20mainboard/google/eve: Set touchpad IRQ to level triggeredDuncan Laurie
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
2017-04-19mainboard/google/poppy: Provide nhlt variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide memory configuration variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide cros_gpio variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Add variant API for board_id and gpioFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
2017-04-19mainboard/google/poppy: Prepare sharing directory for variantsFurquan Shaikh
2017-04-19mb/google/poppy: Add camera supportV Sowmya
2017-04-19mb/google/poppy: Add Image Processing Unit ASLSowmya
2017-04-18mainboard/google/poppy: Clean up gpio.h fileFurquan Shaikh
2017-04-18mainboard/google/poppy: Enable deep S3 in DC modeFurquan Shaikh
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 04:40:35 +0000