summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2019-09-28mb/google/drallion: Set UART for console to UART controller 0Aamir Bohra
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
2019-09-26google/grunt: add new two DDR source for TreeyaPeichao Wang
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
2019-09-25mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to KconfigFurquan Shaikh
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
2019-09-20mb/google/hatch: override smbios manufacturer name from CBIWisley Chen
2019-09-19mb/google/drallion: add sku id base on sensor detectionEric Lai
2019-09-19mb/google/drallion: Add memory init setup for drallionThejaswani Putta
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
2019-09-18mb/google/drallion: Add SPD files for drallionAmanda Huang
2019-09-18mb/google/drallion: Enable 360 sensor detectionBernardo Perez Priego
2019-09-18mb/google/drallion: Update gpio config for drallionVarun Joshi
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
2019-09-16src/mainboard: Remove unused include <device/pci_ops.h>Elyes HAOUAS
2019-09-16mb/google/kohaku: Update USB port settingsSeunghwan Kim
2019-09-15src/mainboard: Remove not used #include <elog.h>Elyes HAOUAS
2019-09-14arm64: Uprev Arm TF and adjust to BL31 parameter changesJulius Werner
2019-09-13mb/google/hatch: Merge emmc_sku_gpio_table and gpio_table to one tablePeichao Wang
2019-09-13mb/google/drallion: Use arcada_ish.bin for arcada_cmlSelma BENSAID
2019-09-13mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500msPhilip Chen
2019-09-12mb/google/drallion: Update memory mapIvy Jian
2019-09-12soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usageSubrata Banik
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
2019-09-12mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RSTAamir Bohra
2019-09-11src: Remove unneeded include <arch/interrupt.h>Elyes HAOUAS
2019-09-11mb/google/hatch: Create dratini variantWisley Chen
2019-09-11mb/google/drallion: enable Elan and Melfas touch panelEric Lai
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
2019-09-10mb/google/poppy/variant/nocturne: add EC_SYNC_GPIONick Vaccaro
2019-09-10mb/google/hatch/variants/helios: Modify FPU power on sequenceFrank_Chu
2019-09-10mb/google/octopus: Add a new sku for meepWisley Chen
2019-09-10mb/google/kahlee/treeya: Tune I2C bus 1, 2 and 3 clockPeichao Wang
2019-09-09mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectivelyPeichao Wang
2019-09-09lib/spd_bin: Extend DDR4 spd informationEric Lai
2019-09-09mb/google/drallion: modify USB settingEric Lai
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
2019-09-05mb/google/octopus: Set sar file name for meep skuWisley Chen
2019-09-05mb/google/drallion: modify PCIE settingEric Lai
2019-09-05mb/google/octopus: Load custom SAR values by SKU ID for BloogTony Huang
2019-09-04mb/google/kahlee/treeya: Update the memory timing table for Treeya to the 2T ...Peichao Wang
2019-09-04mb/google/kahlee/treeya: override sku_id() functionPeichao Wang
2019-09-04mb/google/hatch/var/kindred: Update DPTF parameters and TDP PL1/PL2David Wu
2019-09-03mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200David Wu
2019-09-02mb/google/drallion: add memory sku idEric Lai
2019-09-02mb/google/drallion: Enable HDA for drallion platformAamir Bohra
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
2019-08-30mb/google/octopus/variants/garg: update new SKUKevin Chiu
2019-08-30mb/google/kahlee/variants/careena: override DRAM SPD tableKevin Chiu
2019-08-30google/buddy: adjust CID for realtek audio codecMatt DeVillier
2019-08-30mb/google/drallion: change servo board debug to UART 0Eric Lai
2019-08-30mb/google/hatch: Add settings for noise mitgationDtrain Hsu
2019-08-30mb/google/hatch: Add 16G 3200 generic SPD fileShelley Chen
2019-08-29arch/arm: Make ARM stages select ARCH_ARMArthur Heymans
2019-08-29mb/google/drallion: Update memory mapBernardo Perez Priego
2019-08-29mb/google/drallion: Correct drallion HWID and add HWID for variantsMathew King
2019-08-28google/rambi,intel/baytrail: Simplified romstage flowKyösti Mälkki
2019-08-28mb/google/hatch/variants: Increase touchscreen reset delay to 120msSumeet Pawnikar
2019-08-28google/leon: Add DRIVERS_I2C_RTD2132Kyösti Mälkki
2019-08-28mb/google/hatch: Enable Override DLLs for KindredJamie Chen
2019-08-28mb/google/hatch: Override DLL values for KindredJamie Chen
2019-08-28mb/google/drallion: remove GBE fileEric Lai
2019-08-28mb/google/drallion: add dummy SPD fileEric Lai
2019-08-28mb/google/poppy/variant/nami: add sku ids of bard/ekkoRen Kuo
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
2019-08-26google/link: fix detection of dimm on channel 1Matt DeVillier
2019-08-24mb/google/octopus: Re-assign sku number for vortininjaWisley Chen
2019-08-23mb/google/hatch/var/kindred:: Add enable signal for touch screenPhilip Chen
2019-08-23mb/google/hatch/variants/kindred: Remove unused devicesPhilip Chen
2019-08-23mb/google/rambi: update GPIO, RAM config for clapperMatt DeVillier
2019-08-23Revert "mb/google/octopus: Disable WLAN prior the entry of S5"Kane Chen
2019-08-23mb/google/drallion: Add two variants - arcada_cml & sarien_cmlThejaswani Putta
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
2019-08-21arch/x86: Rename some mainboard_romstage_entry()Kyösti Mälkki
2019-08-21mb/google/kohaku: Correct DPTF temp sensor IDsSeunghwan Kim
2019-08-21mb/google/octopus/variants/bloog: Add G2Touch touchscreen supportTony Huang
2019-08-21mb/google/kahlee/treeya: Update Raydium TS device ACPI nodesChris Wang
2019-08-21mb/google/kahlee/treeya: remove keyboard backlight supportChris Wang
2019-08-21mb/google/kahlee/treeya: Use GPIO_10 for EC_SYNC_IRQChris Wang
2019-08-21mb/google/kahlee/treeya: Add EC_ENABLE_TBMC_DEVICEChris Wang
2019-08-21mb/google/kahlee/treeya: Enable Synaptics touchpad andPeichao Wang
2019-08-20mb/google/hatch: Skip SD card controller WP pin configuration from FSPAamir Bohra
2019-08-20mb,autoport: Fix GCC 9 Port_List build errorJacob Garber
2019-08-20mb/google/{eve,glados}: Copy channel arrays separatelyJacob Garber
2019-08-20mb/google/kohaku: Use level trigger for touchscreen interruptSeunghwan Kim
2019-08-20google/stout: Use MAYBE_STATICKyösti Mälkki
2019-08-20google/butterfly: Replace use of __PRE_RAM__Kyösti Mälkki
2019-08-19google/rambi: Replace __PRE_RAM__ with ENV_ROMSTAGEKyösti Mälkki
2019-08-19mainboard/google: Remove use of __PRE_RAM__Kyösti Mälkki
2019-08-18cpu/intel: Enter romstage without BISTKyösti Mälkki
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 20:14:28 +0000