summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
2018-02-15mb/google/octopus: Add new boardHannah Williams
2018-02-14mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)Jonathan Neuschäfer
2018-02-13mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WBFurquan Shaikh
2018-02-12mainboard/google/zoombini/variants/meowth: enable touchscreenNick Vaccaro
2018-02-12google/kahlee: Select HAVE_ACPI_RESUMEMarshall Dawson
2018-02-12google/snappy: enhance BigDaddy USB#2 2.0 strengthKevin Chiu
2018-02-11mb/google/fizz: Set SATA GPIOs in bootblockShelley Chen
2018-02-10mb/google/poppy/variants/nautilus: set oem_id, oem_table_id fields of acpi_he...Naveen Manohar
2018-02-10mainboard/google/meowth: Enable ECT againLijian Zhao
2018-02-10mb/google/poppy/variants/nami: set oem_id, oem_table_id fields of acpi_header_tKaiyen Chang
2018-02-10mb/google/grunt: Add ADAU7002 to devicetreeDaniel Kurtz
2018-02-10mb/google/kahlee: Add grunt audio codecs to devicetreeDaniel Kurtz
2018-02-08mb/google/poppy/variants/nami: Revise AC/DC loadlinesGaggery Tsai
2018-02-07mb/google/fizz: Set Pmax to 120 for all SKUsShelley Chen
2018-02-07google/kahlee/grunt: Fix 2 device specific variablesAkshu Agrawal
2018-02-07mb/google/poppy/variants/poppy: Enable EC_ENABLE_SECOND_BATTERY_DEVICENicolas Boichat
2018-02-07mb/google/poppy/variants/nami: Change WiFi wake pin to GPP_E22Furquan Shaikh
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
2018-02-06mb/google/kahlee: Fix grunt I2C rise/fall timesJustin TerAvest
2018-02-06mb/google/kahlee: Remove cmos.layoutRichard Spiegel
2018-02-06mb/google/eve: Enable HotPlug on PCIe root port for WiFiDuncan Laurie
2018-02-06google/kahlee: Initialize non-early i2c buses in mainboard_initDaniel Kurtz
2018-02-06mb/google/fizz: Determine PsysPl3 and Pl4 valuesShelley Chen
2018-02-06mb/google/nautilus: Work around the power issue of MIPI and USB camerasAndy Yeh
2018-02-05mb/google/fizz: Get OEM ID and SKU ID from ECDaisuke Nojiri
2018-02-05google/lars: Turn on keyboard backlight in romstageJenny TC
2018-02-05google/lars,lili: Update GPIO mappingdavid
2018-02-05google/lars: Update the MAINBOARD_FAMILY string in KconfigDuncan Laurie
2018-02-05google/lars,lili: Update SPD DataMatt DeVillier
2018-02-05google/lars: Add sdmode-delay property for max98357aMatt DeVillier
2018-02-05google/lars: update device properties for Nuvoton codecMatt DeVillier
2018-02-05google/lars,lili: Set new thermal parametersdavid
2018-02-05google/lars: Update DPTF settingdavid
2018-02-05mb/google/kahlee: Enable wlan card so it can be detectedMartin Roth
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
2018-02-02mb/google/kahlee/mainboard.c: Create mainboard_pirq_dataRichard Spiegel
2018-02-01mb/google/kahlee: always load and run display opromAaron Durbin
2018-01-31mb/google/kahlee: Add grunt cr50 supportJustin TerAvest
2018-01-31mb/google/kahlee: Add grunt trackpad in devicetreeJustin TerAvest
2018-01-31mb/google/poppy/variants/nautilus: Add gpio-keys ACPI node for PENHFurquan Shaikh
2018-01-30mainboard/google/zoombini/variant/meowth: enable FCAM_PWR_ENNick Vaccaro
2018-01-30mainboard/google/zoombini/variant/meowth: fix SPD issuesNick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: enable I2C bus #2Nick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: Add rev 2 gpio changesNick Vaccaro
2018-01-30mainboard/google/zoombini/variants/meowth: Fix USB OC settingsNick Vaccaro
2018-01-30mb/google/poppy/variants/soraka: Update _PSV for TCPUFurquan Shaikh
2018-01-30mb/google/poppy/variants/soraka: Enable mode-aware DPTFFurquan Shaikh
2018-01-30chromeec: Decouple EC tablet event and TBMC deviceFurquan Shaikh
2018-01-30mb/google/kahlee: correct comments in baseboard gpio.cAaron Durbin
2018-01-30mb/google/kahlee: mark h1 bus as early init for gruntAaron Durbin
2018-01-29google/scarlet: Add initialization sequence for Innolux P097PFG panelLin Huang
2018-01-29rockchip/rk3399: Support LONG_WRITE type in MIPI DSILin Huang
2018-01-29google/fizz: Adjust PL2 and PsysPl2 values for power lossShelley Chen
2018-01-29mb/google/kahlee: Fix I2C bus 1 timing for GruntJustin TerAvest
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
2018-01-26mb/google/poppy/variants/soraka: Configure unused pins as NCFurquan Shaikh
2018-01-26mb/google/poppy/variants/nautilus: Update camera power enable GPIOsFurquan Shaikh
2018-01-26mainboard/google/zoombini/variant/meowth: add PCH_WP_ODNick Vaccaro
2018-01-25mb/google/kahlee: Add Grunt touchscreen supportJustin TerAvest
2018-01-25mb/google/kahlee: Add Grunt devicetree i2c bus cfgJustin TerAvest
2018-01-25mb/google/kahlee: Select DRIVERS_I2C_GENERICJustin TerAvest
2018-01-25mb/google/kahlee: Correct grunt HWID in GBBJustin TerAvest
2018-01-25mb/google/poppy/variants/nami: Disable SATAKane Chen
2018-01-25mainboard/google/zoombini: add ACPI entry for cr50Caveh Jalali
2018-01-25mb/google/poppy/variants/nami: Enable elan touchpad wakeup system from S3/S0ixVan Chen
2018-01-24mb/google/fizz: Add AC/DC loadline settingsGaggery Tsai
2018-01-23mainboard/google/fizz: Tune audio i2c parametersShelley Chen
2018-01-23grunt: Enable TPMChris Ching
2018-01-23mb/google/reef,sand: Set S0ix lazy wake maskJenny TC
2018-01-23google/kahlee/BiosCallOuts.c: Remove platform_FchParams_resetRichard Spiegel
2018-01-23google/kahlee/variants/(kahlee/baseboard)/gpio.c: Convert GPIO tableRichard Spiegel
2018-01-23soc/amd/stoneyridge/southbridge.c: Create a GPIO programming functionRichard Spiegel
2018-01-23mb/google/poppy/variants/nami: Remove iccmax setting from devicetreeFurquan Shaikh
2018-01-23sb/intel/bd82x6x: Reduce function-disable messNico Huber
2018-01-22mainboard/google/zoombini: mrc cacheCaveh Jalali
2018-01-22mainboard/google/zoombini: add EC to ACPI tablesCaveh Jalali
2018-01-22mb/google/fizz: Remove IccMax settings from DTGaggery Tsai
2018-01-22mainboard/google/zoombini/variants/meowth: enable PCH_FP_PWR_ENVincent Palatin
2018-01-22mainboard/google/zoombini/variants/meowth: configure FP MCU SPI deviceVincent Palatin
2018-01-18mainboard/google/zoombini/variant/meowth: add memory optionsNick Vaccaro
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
2018-01-17google/fizz: Fix barrel jack values for U42 and U22Shelley Chen
2018-01-17mb/google/poppy: Set S0ix lazy wake maskJenny TC
2018-01-17mb/google/nautilus: Add MIPI camera asl files for IMX258 and DW9807Andy Yeh
2018-01-17mb/google/poppy: Move PMIC specific objects to appropriate scopeRizwan Qureshi
2018-01-17mb/google/poppy: Split ports and endpoints config for CIO2Rizwan Qureshi
2018-01-15mb/google/poppy/variants/nami: Enable elan touchpadvan_chen
2018-01-13mainboard/google/kahlee: Finish GPIO90 setup for GruntMartin Roth
2018-01-13mainboard/google/kahlee: Fix GPIO tableMartin Roth
2018-01-13google/kahlee/grunt: Add grunt touchpad ASLDaniel Kurtz