aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02soc/intel/tigerlake: Reorganize memory initialization supportFurquan Shaikh
This change reorganizes memory initialization code for LPDDR4x on TGL to allow sharing of code when adding support for other memory types. In follow-up changes, support for DDR4 will be added. 1. It adds configuration for memory topology which is currently only MEMORY_DOWN, however DDR4 requires more topologies to be supported. 2. spd_info structure is organized to allow mixed topologies as well. 3. DQ/DQS maps are organized to reflect hardware configuration. TEST=Verified that volteer still boots and memory initialization is successful. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib625f2ab30a6e1362a310d9abb3f2051f85c3013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-02mb/google/volteer: Create Malefor variantWilliam Wei
This commit creates a malefor variant for Volteer. The initial settings override the baseboard was copied from variant ripto. Fine tune GPIO and memory DQ based on malefor schematics. BUG=b:150653745 BRANCH=volteer TEST=emerge-volteer coreboot Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: Idbeebb13e537287686344740211143df35b7863a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02google/trogdor: Add 'Lazor' derivativeJulius Werner
This patch adds GOOGLE_LAZOR which is just a copy of GOOGLE_TROGDOR for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0dca8e1c29bdd91625d58b3cb583b530ed925e9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-04-01soc/intel/tigerlake: Remove Jasper Lake SoC referencesAamir Bohra
This implementation removes all JSL references from the TGL SoC code. Additionally, mainboard code changes are done to support build. BUG=b:150217037 TEST=build tglrvp and volteer Change-Id: I18853aba8b1e6ff7d37c03e8dae2521719c7c727 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-01soc/intel/{tgl,jsl}: Use soc/intel/jasperlake for Jasper Lake SoCAamir Bohra
Switch to using Jasper Lake SoC code from soc/intel/jasperlake and stop referring from soc/intel/tigerlake. Addtionally mainboard changes are done to support build. BUG=b:150217037 TEST=Build and boot waddledoo. Build jasperlake_rvp and volteer board. Change-Id: I39f117bd66cb610a305bcdb8ea65332fd0ff4814 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-31mb/google/slippy: Convert variants to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Test: build all slippy variants, compare generated static.c to ensure resulting generated contents unchanged (although layout will) Change-Id: If237fad38a1bccfb8e51edfae3ecb75d05ade240 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-31mb/google/link: Use GENERIC_SPD_BINMatt DeVillier
Clean up Link's mainboard dir by putting the SPD files in a spd subdirectory like all other/newer boards use, and selecting GENERIC_SPD_BIN to include them in the build. Test: build google/link and verify spd.bin unchanged Change-Id: I9c2f9f77dbdd6552c5ae1e7a0df2051b9b85badc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-31mb/google/link: use default GMA display profileMatt DeVillier
Link's DID data makes no sense, and ACPI backlight controls don't work as a result. Replace them with the default profile used by most/all other boards. Test: build/boot google/link, verify ACPI backlight controls functional Change-Id: Ia7cb3f10bd3c05ebaf414c17a8f94d2e9b40ae26 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-30mb/google/kohaku: Add enable_delay_ms for wacom penEvan Green
Add an enable reset delay to avoid messages like this in the kernel: i2c_hid i2c-WCOM50C1:00: failed to change power setting. This gets rid of all the warnings except one on reboot/shutdown. That last case likely isn't fixed because the sleep command is being sent directly from i2c_hid_shutdown(), so no ACPI routines get to run and provide the delay. Since the machine is going down for shutdown/reboot anyway, fixing that last case is a lower priority. BUG=b:145094539 TEST=Run on kohaku, switch to guest mode and log out, no errors Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-30mb/google/deltaur: Provide initial devicetreeTim Wawrzynczak
This initial devicetree attempts to correctly configure the status of each PCI device. Not all required drivers are instantiated, nor are all of the SoC options fully selected yet. PCIe root ports are enabled and clocks are assigned. USB ports are assigned. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I911ec08b0db3647d131113a138fb74a55612fd62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: Add initial GPIO configurationTim Wawrzynczak
This configuration sets up all of the GPIO pads for the first rev of the board. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4f6398808809492dcb345ccaa09e199fa35e40cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/39674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: add deltaur mainboard initial supportBora Guvendik
Created a new Google baseboard using Tiger Lake named deltaur, taking volteer as a starting point. BUG=b:151102807 TEST=make build successful Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib98f328df22f39e7d9d625a3292954881ee15b15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
In order to create a working baseline all ports are being set to have retimers. Setting the TcssAuxOri UPD to 0 in order for the SoC to not misconfigure the ports. Volteer will need some additional changes after this is implemented to account for ports that do not have a retimer. This setting is in the process of being documented in the TGL EDS and we can update once it is fully understood what this setting is changing on the SOC side. BUG=b:145943811 BRANCH=none TEST=Boot to OS and check Type-C port1 Display on Volteer, Connecting Type-c display should work regardless of Type-c cable orientation. Change-Id: I29eb0513299126ad8d1ee11ded2c771f28ad13f3 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39460 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30volteer: Create halvor variantFrank Wu
Create the halvor variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:151399850 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_HALVOR Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If4d3417ba55d56af441c99d949a196328d7a1951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-30mb/google/hatch/var/kindred: set wifi sar for kledDavid Wu
Enable wifi sar feature and set wifi sar name for kled sku. BUG=b:152277272 TEST=emerge-hatch coreboot chromeos-bootimage and verify wifi SAR load by sku-id Change-Id: I9ee242773fd05cc2bcd7bde07da8176022827677 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-03-29mb/google/glados: disable serial console by defaultMatt DeVillier
Glados boards do not have an exposed serial port outside of the servo interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot google/chell with board defaults Change-Id: Ifad6f805e66438e2c436d9fa235d9be2ecf69179 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29drivers/intel/gma/acpi: Provide default definition for displaysNico Huber
Use it wherever the standard numbers were copied to. Bit 31 is set at runtime unconditionally, so we don't need it here. Change-Id: I0d853c3b8250a2c7b2d1a91985a555e4b17ad76c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39731 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29nb/intel/haswell: Implement proper backlight PWM configNico Huber
Further backport the backlight-PWM handling from Skylake. Beside configuring the PWM frequency in Hz, we also use the PCH's logic for the brightness setting via BLM_PCH_OVERRIDE_ENABLE. Linux would toggle it anyway and that might confuse our ASL code. We assume that the 183Hz value that was set before for Slippy variants was overridden by Linux with the 200Hz VBT value, like it was for the Broadwell Chromebooks. So we set 200Hz for them in the devicetrees. The calculated value for the T440p of 220Hz seems sane and also matches the VBT. Change-Id: I17dfe1a3610d5e2918c617cf5d10896692fdccb3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/google/cyan: Clean up KconfigMatt DeVillier
Cyan has no VGA BIOS available (at least not publicly), so remove related options. Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Change-Id: Ic079a39ca5ad0ac653b52248244b94d4bfbd08a4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39872 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29hatch: Create sushi variantPaul Fagerburg
Create the sushi variant of the hatch reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 3.0.0). BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SUSHI Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-26mb/google/dedede: Query the EC for board versionDtrain Hsu
The board version is part of EC's EEPROM, select Kconfig item to enable requesting the EC for board version. BUG=b:152374066 TEST=Verified the mainboard version is from EC's EEPROM. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Idd8aceed83439cb500e2b03153e9f8ba93979ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/volteer: Use tabs for indentsElyes HAOUAS
Change-Id: I7304b06d7bf34fb7126acfdef811481dc5cba598 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. Adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn V.2: Fixup a code comment typo while we are here. V.3: Vary special casing semantics for idx==0 => default mac addr is set. V.4: Rework to still support the legacy path. BUG=b:152157720 BRANCH=none TEST=none Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25mb/google/dedede: Update EC_MKBP_INT_L configurationKarthikeyan Ramasubramanian
The concerned GPIO is configured as an open drain at the Embedded Controller side without an external pull-up. This causes leakage in the PP3300_A rail. So configure the GPIO to have a weak internal pull-up at the SoC side. BUG=b:151680590 TEST=Build the mainboard. Ensure that there are no leakages in the PP3300_A rail. Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25acpi: correct the processor devices scopeMichał Żygowski
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here. Additionally add processor scope patching for P-State SSDT created by AGESA, becasue AGESA creates the tables with processors in \_PR scope. TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are no errors, decompile ACPI tables with acpica to check whether the processor scope is correct and if IASL does not complain on wrong checksum, run FWTS Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23acpi: Change Processor ACPI Name (Intel only)Christian Walter
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here for Intel CPUs only. Tested on: * X11SSH (Kabylake) * CFL Platform * Asus P8Z77-V LX2 and Windows 10 FWTS does not return FAIL anymore on ACPI tests Tested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23src/mb/google/volteer: Add camera ACPI configurationDaniel Kang
Add camera ACPI configuration for Ripto/Volteer BUG=None BRANCH=None TEST=Build and boot Ripto or Volteer. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I2b47ccd989192273a29f09bf097e12e357929334 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
This is required for PD notifications on the cros_ec driver. BUG=b:150649744 TEST=Boot volteer with this patch and verify that PD notifier events are being generated. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23mb/google/dedede: Update SPD index for waddledeeKarthikeyan Ramasubramanian
Micron memory part uses SPD Index 0. BUG=b:152005386 TEST=Build the mainboard. Change-Id: I990a95b13d636148f0f922fd5c6d4e489d35ed2c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-20mb/google/dedede Add Audio support for waddledooAamir Bohra
1. Configure Audio GPIOs. 2. Set i2c4 configuration. 3. Update PCH HDA configuration TEST=Verify codecs gets listed with aplay -l command. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Change-Id: Ic0516c7a8fee79ce17343a7f42895d6ef534fec9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-or-laterAngel Pons
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/google/nightfury: Update overridetree.cbSeunghwan Kim
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury BUG=none BRANCH=firmware-hatch-12672.B TEST=built and verified touchpad and touchscreen worked Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-18src/mainboard/g/octopus: Enables GMM in the devicetree for octopusFranklin He
Adds GMM into the baseboard of Octopus For GLK, PCI device 3 is GMM according to Document#: 569262(Glk EDS Vol-1 rev2-7) Related to Gerrit review 39579 BUG=b:151115705 BRANCH=None TEST=Flashed final image on Chromebook Change-Id: I75b4a835c18c5eeb542b7f7b89deea45a31e47bd Signed-off-by: Franklin He <franklinh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-18mb/google/dedede: Support integratred BT enumerationAamir Bohra
The integrated BT is routed via USB2 port 8, add USB configuration to support integrated BT enumeration. Change-Id: I46d8c92ba57cd72a91ee15ef4d11f07824c29e9a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-17mb/google/octopus: Add custom SAR values for Foob360Peichao Wang
Foob360 would prefer to use different SAR values. Since Foob360 sku id is 9. BUG=b:149362272 BRANCH=octopus TEST=build Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-17mb/google/dedede: Add waddledee variantKarthikeyan Ramasubramanian
Add initial support for waddledee variant board. BUG=b:151576904 TEST=Build the mainboard and variant board. Change-Id: I20d41fbbb78c7fd2f964a97ffebbc9c3bbfb1c5c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-15mb/google/kahlee/nuwani: support new Elan touch panel for NuwaniTommie
This is new Elan touch screen IC, which includes touch panel and USI pen. BUG=b:151514167 TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: I98801b8c31812637f71d7eaaa0f12b47901dc47a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-15mb/google/hatch: Create palkia variantKane Chen
Add Palkia as a variant of Hatch. BUG=b:150254194 BRANCH=none TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/volteer: Use generic SPD filesNick Vaccaro
Volteer uses 4 bits (hardware straps) to indicate what memory configuration the board is populated with (i.e. which SPD file to use for the populated memory). This allows for only 16 different SPDs for supporting Volteer and all future variants of Volteer. Currently, each memory chip needs its own SPD file, so we can only support 16 different memory chip options for Volteer and all of its variants. Generic SPD files are just SPD files that have been stripped down to contain only fields that are important for the memory controller (strips out items like vendor info, for example). Using generic SPD files allows for more than 16 different memory options given it's no longer a 1-to-1 mapping as similar memory modules from different vendors can share the same generic SPD file. BUG=b:147857288 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB of memory. Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/dedede: Configure WLANKarthikeyan Ramasubramanian
Turn on CNVi device. Turn on PCIe Root port that hosts WLAN device. Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN - both CNVi and M.2. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9bb8e57cdb688bc544929c94af380b9ef1d936a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-14mb/google/dedede: Add BT Disable GPIO configurationKarthikeyan Ramasubramanian
Disable the BT module in bootblock and enable it in ramstage. This allows for loading the BT firmware during reboot. TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/drallion: Enable GEO SAREric Lai
Enable GEO SAR function. BUG=b:150347463 BRANCH=drallion TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iace9aa0245840328aa13920512747ca7f60e85dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/39467 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
Provide settings for configuring the link between HD-Audio controller and display unit for purposes of HDMI/DP Audio playback. BUG=b:144708516, b:148385924 TEST=none Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/hatch/Kconfig: Disable VBOOT_EARLY_EC_SYNC on PuffEdward O'Callaghan
Early ec sync needs to be disabled for EFS2 to function. BUG=b:151115320 BRANCH=none TEST=none Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-12mb/google/dedede: Enable trackpad supportPandya, Varshit B
1. Configure trackpad interrupt GPIO. 2. Set i2c0 configuration. 3. Add trackpad ACPI support. TEST= Verify trackpad working. Verify I2C SCL frequency below 400Khz on trackpad operation. Change-Id: I52c578aef591f5be90fb709bab4c8342ea9729e6 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
Create new variant and build for nightfury. BUG=b:149226871 TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-03-12mb/google/volteer: configure L1Substate for PCIeWonkyu Kim
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround. Reference: #613582 Tiger Lake PCH-LP Sightings Report issue id #1409566330 BUG=none BRANCH=none TEST= boot to OS and check warm reboot with NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-11mb/google/dedede: Add ACPI configuration for USB portsKarthikeyan Ramasubramanian
Enable USB ACPI driver. Add ACPI configuration for all the USB ports. Since one of the USB ports is used for Bluetooth configure the reset_gpio used by that port. TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3e7b8f00102c96dcc295601359d3ecfbcd1bea00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-03-11mb/google/dedede: Add SPD hex file for Samsung memory partMeera Ravindranath
BUG=b:150154457 BRANCH=none TEST=Build dedede, flash and boot to kernel. Change-Id: I7248861efd1edd5a0df0e17d39a47c168cab100e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39348 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/drallion/variants/drallion: Set PCH Thermal Trip point to 77°CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Drallion. Change-Id: I146068d8019859be1c27e2a8174dfe7909d42d0a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2020-03-11mb/google/hatch: Add LP_4G_2133 SPDraymondchung
Add LPDDR3 4GB 2133MHz SPD file. BUG=b:149226871 TEST=Build and check cbfs has the spd.bin Change-Id: I1598774a87eecc76082286540beadaa3c26eda69 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39271 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/volteer: Enable pcie rp11 for optaneVenkata Krishna Nimmagadda
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk related pins. Configuring pciecontroller3 to be set from 2x2. This will by done by auto detecting optane memory: enabling HybridStorageMode. BUG=b:148604250 BRANCH=chromeos TEST='Build, boot and look for two NVMe devices with lspci on Volteer' Cq-Depend: chrome-internal:2501837 Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628 Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428 Tested-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/volteer: Disable WWAN PCIeAlex Levin
Disable WWAN PCIe to allow WWAN enumerate as USB on Volteer. BUG=b:146226689 BRANCH=none TEST=lsusb shows WWAN device Change-Id: I04e49e3ec989d20ea3469fce06051c475b0ed0c8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-11mb/google/puff: Enable cros_ec_keyb deviceKangheui Won
This is required to transmit button information from EC to kernel. BUG=b:150830342 BRANCH=None TEST=firmware_ECPowerButton test passes on puff Change-Id: I10ba9d55e8997ce2412deb0613cfcaa8f24f271d Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-03-10src: Remove unneeded 'include <arch/cache.h>'Elyes HAOUAS
Change-Id: I6374bc2d397800d574c7a0cc44079c09394a0673 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/google/volteer: set TcssXhciEn to 1Brandon Breitenstein
BUG=144874778 TEST=Built with Volteer recipe and verified USB functionality Change-Id: I6cbdbd8a4f65a0fe19e3fb8d7b60b8b849f104e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/dedede: Add PCIe Root Port ConfigurationKarthikeyan Ramasubramanian
Add configuration for all the PCIe Root ports and Clock Source. Configure the Root Ports as disabled and clock sources as not used. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0a1ad7e056907e454a93f51c84e1d99f08b7bdef Reviewed-on: https://review.coreboot.org/c/coreboot/+/39166 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Configure EDP_HPD GPIOKarthikeyan Ramasubramanian
This enables display for use by payload. TEST=Build and boot the mainboard. Ensure that the screens displayed by payload are visible. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5fcd70623b15ae39954242605e75b2c5ce02ff14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/dedede: Configure EC <-> AP GPIOsKarthikeyan Ramasubramanian
BUG=b:150869661 TEST=Build and boot the mainboard. Trigger apreset from EC console. Trigger reboot from AP console. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0d6dd0b4264c11f7ee0ef436cc819b0bb92974f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Add GPIO listKarthikeyan Ramasubramanian
Leave all the GPIOs in not connected state so that they can be configured depending on the use-case. This is done to park the GPIOs in a known safe state. This will also help to ensure that the required GPIOs are configured when the concerned use-cases are enabled. Below GPIOs are configured in Native Function 1 and are required for boot-up. * VCCIN_AUX_VID0 * VCCIN_AUX_VID1 * AP_SLP_S0_L * PLT_RST_L * CPU_C10_GATE_L * GPDs BUG=None TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5293536f66a6b08c9c2d2a6281684755a0c0b1b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39114 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/volteer: Enable FPMCU on volteerAlex Levin
BUG=b:147500717 TEST=none Change-Id: I32fa27b399127dbf8608e0556c77431d2dad652d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/volteer: change two gpio settingsNick Vaccaro
- declare the FPMCU interrupt to be level-triggered - change EC_PCH_WAKE_ODL gpio to native function mode - corrected spelling of a signal name in a comment BUG=b:144933687, b:148179954 BRANCH=none TEST=none Change-Id: I62da900d0b71139e55b52d06ec09ca25106f73cd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/google/volteer: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi. BUG=none BRANCH=none TEST=Build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia8baf1c7b770db23f31383bda46ae8d090468560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-07mb/google/volteer: add samsung-K4UBE3D4AA-MGCR SPDNick Vaccaro
Add samsung K4UBE3D4AA-MGCR SPD as memory sku id 1. BUG=b:148182234 BRANCH=none TEST=none Change-Id: Ie00c45de4d31856109cda13051a75cfa2c2548f7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/google/kahlee/nuwani: Create Nuwani variantPeichao Wang
This commit creates a nuwani variant for Grunt. The initial settings override the baseboard was copied from variant treeya. BUG=b:144890301 TEST=emerge-grunt coreboot Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id3a7fc890340e5a88ebc4b516dc2c0b085654999 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39316 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/google/volteer: add new ripto variantNick Vaccaro
Add a new ripto variant based off of the volteer baseboard design. BUG=b:148385924, b:150810535 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto image and verify ripto boots to the kernel. Change-Id: If7606588147500a465f16c7846e2c8429ece93ec Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-06mb/google/volteer: make variant_early_gpio_table weakNick Vaccaro
Declare variant_early_gpio_table() weak to allow override by variants. BUG=b:148385924, b:150810535 TEST=none Change-Id: Ife5e3b75256f71ecd763c4000fd2c7d7c927bb64 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39300 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/google/hatch/puff: Enable VBOOT_EC_EFSSam McNally
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot build must also enable EC EFS. Puff EC uses EFS, so enable it in the AP vboot build. BUG=b:150742950 TEST=Puff can boot with EC EFS with hardware write protect enabled BRANCH=none Signed-off-by: Sam McNally <sammc@chromium.org> Change-Id: I0877000b7d277106436831f2d69775c25299da9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-04src/ec,mainboard: Move weak smbios_system_sku() override inwardsEdward O'Callaghan
Internalise smbios_system_sku() strong symbol inwards in the ec_skuid.c implementation and simply wrap a call to: google_chromeec_smbios_system_sku(). BUG=b:150735116 BRANCH=none TEST=none Change-Id: I05ebfc8126c0fb176ca52c307c658f50611ab6ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39146 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04mainboard/google/dedede: Migrate onto SKU ID/fw_config helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. dedede uses the non-legacy SKU ID space. squash in, mainboard/google/dedede: Migrate onto get fw_config helper BUG=b:149348474 BRANCH=none TEST=only tested on hatch Change-Id: I0c21a748fddef0985022cb4e77a8db95d6692f4b Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-04mainboard/google/octopus: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders and set the sku id max to 0xff for legacy to ensure we behave the same. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I60a37a5f9659b8df4018872956f95e07a3506440 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-03mb/google/drallion: Enable cbfs SAR valueEric Lai
Enable read SAR value from cbfs. BUG=b:150347463 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5f27b6f7245669728e3e394e9c6a39c11bfda3b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
2020-03-03mb/*/Kconfig: Factor out MAINBOARD_VENDORAngel Pons
Only some mainboard vendors have a prompt for this option. Let's be fair and give this ability to everyone. Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-03mb/google/dedede: Add memory initialization support for dededeMeera Ravindranath
Update memory parameters based on memory type supported by dedede 1. Update dq/dqs mappings 2. Update spd data for Micron Memory 3. Add SPD data binary files for supported memory types 4. Update other FSPM UPDs as part of memory initialization BUG=none BRANCH=none TEST=Build dedede, flash and boot to kernel. Change-Id: I7248861efd1ecd5a0df0e17d39a44c168cab200e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39136 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02mb/google/kohaku: Add LPDDR 16G 2133 supportSeunghwan Kim
BUG=b:149775711 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I856d7b361e70b657966cd4036c79f2fedfabb766 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39126 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. This follows commit 408d1dac9e23250c0e485bbf934771f769b717c1. Change-Id: I0c0f4ad8bf743010ebdd2d53fcf297aeab64a662 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02mb/**/dsdt.asl: Remove "Some generic macros" comment, againAngel Pons
It provides no useful information, so it might as well vanish. This follows commit 0142d441c63a9bb1a7955ea0ba764a2ddbc38d48. Change-Id: Iad41d8d39c6712cebfa5245f37bc69061b5ac552 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02nb/intel/sandybridge: Fix VBOOTPatrick Rudolph
The VBOOT code can be compiled but it asserts with: ASSERTION ERROR: file 'src/security/vboot/common.c', line 40 Start VBOOT in bootblock to fix the assertion. Tested on Lenovo X220: The assertion is gone, the platform boots again. Change-Id: I48365e911b4f43aecba3b1f950178b7ceed5b2e9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-02mb/google/octopus: support new Elan touch panel for FoobTommie
This is new elan touch screen IC, which includes touch panel and USI pen. BUG=b:149800883 BRANCH=octopus TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Ibec3d08cc740e398a10a5c845181318724afc70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-02mb/google/hatch/var/jinlon: Disable EPS on some SKUsRajat Jain
Disable EPS on the SKUs that do not have it. Change-Id: I7305097beea3484634933ab856fd084933868a10 Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-03-02mb/google/hatch/var/jinlon: Enable gfx/generic driverRajat Jain
Enable the GFX device for Jinlon. Change-Id: I6ba90bf464e315ec364b6f35e7670924a2aba25a Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-28mainboard/google/volteer: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. volteer uses the non-legacy SKU ID space. BUG=b:149348474 BRANCH=none TEST=only tested on hatch Change-Id: Ic66908afb7abb34527b4177cfd07f03ad718317c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-28mainboard/google/hatch/puff: Toggle on TetonGlacierModeEdward O'Callaghan
Leverage in Puff to avoid diskswap variants. Later this could become part of the baseboard definition and hatch diskswap variants migrated over to use it as well. BUG=b:149171631 BRANCH=none TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration on Puff. Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-28mainboard/google/hatch: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-27mb/google/hatch/var/jinlon: Configure GPP_E0 as outputRajat Jain
Configure GPP_E0 as output for view angle management Change-Id: Iad640eed855b47e365da55fa994c6a3c4c38caf9 Signed-off-by: Rajat Jain <rajatja@google.com>. Reviewed-on: https://review.coreboot.org/c/coreboot/+/39144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-27mb/google/dedede: configure ESPI IO decode range for chrome ECAamir Bohra
Configure below ESPI IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. Change-Id: I1e450d6e45242180de715746b9852634de2669c6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-27mb/google/dedede: Enable display supportAamir Bohra
1. Enable Internal Gfx device. 2. Configure DDI0 for EDP. 3. Configure HPD and DDC suppport for DDI1/DDI2. 4. Configure HPD GPIOs. TEST=Verify display on EDP panel in OS Change-Id: Ia53428af549ba01ab539f9474a6e5e79b72dff5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39132 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26mb/google/hatch: reflow commentPatrick Georgi
Change-Id: I8c721c7ccba4f87d4acb9dae74213a46151fe2ed Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-26mainboard/hatch: Fix GPE wake commentsEdward O'Callaghan
The indirection of names is exceedingly confusing for ultimately the single interrupt trace of EC_PCH_WAKE_ODL between the EC gpio#74 to GPD2/LAN_WAKE# on the PCH side. This helps folks chase this indirection down through the code. BUG=b:147026979 BRANCH=none TEST=builds Change-Id: I35d746a202dae06d2f6f1edfaa3889864b09f50d Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-26mb/google/dedede: Update GPE configurationKarthikeyan Ramasubramanian
WWAN wake event is routed to GPP_D0 GPIO and Pen Detect wake event is routed to GPP_C12 GPIO. Update the GPE configuration accordingly. BUG=None TEST=Build the mainboard. Change-Id: Id36d2c8265a0b7ea241565f6bb723df6b37446fa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 02:59:56 +0000