index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
gitea
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
Age
Commit message (
Expand
)
Author
2014-01-19
board-status: Add board_info.txt extracted from wiki.
Vladimir Serbinenko
2014-01-16
butterfly: fix compilation with !CHROMEOS
Vladimir Serbinenko
2014-01-15
Intel (sandy/ivy): Avoid calling cbmem_initialize() twice
Kyösti Mälkki
2014-01-15
google/stout: Add EARLY_CBMEM_INIT
Kyösti Mälkki
2014-01-12
ibexpeak / bd82x6x: Make SATA mode user-visible option.
Vladimir Serbinenko
2014-01-12
CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_file
Vladimir Serbinenko
2014-01-10
Replace all occurences of sprintf with snprintf
Vladimir Serbinenko
2013-12-24
Remove PCI_ROM_RUN option
Vladimir Serbinenko
2013-12-23
Coding style: punctuation cleanup [1/2].
Idwer Vollering
2013-12-21
exynos5420: Configure the UART pins unconditionally
Gabe Black
2013-12-21
exynos5250: Implement support to boot with USB A-A firmware upload
Julius Werner
2013-12-21
snow: Set up the i2s0 pins during boot
Gabe Black
2013-12-21
armv7/exynos: Fix and remove memory reset workarounds
Hung-Te Lin
2013-12-21
Pit: graphics
Ronald G. Minnich
2013-12-21
kirby is dead. long live the arm pit.
Stefan Reinauer
2013-12-21
pit: update PMIC write sequence in romstage
David Hendricks
2013-12-21
snow: TPS69050 -> TPS65090
David Hendricks
2013-12-21
kirby: pit: Fix up wakeup_need_reset
Gabe Black
2013-12-21
pit: Get rid of the mostly unnecessary exynos5420.h
Gabe Black
2013-12-21
kirby: Clean some cruft from mainboard.c
Gabe Black
2013-12-21
kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.h
Gabe Black
2013-12-21
Add a kirby board which is mostly a copy of pit
Gabe Black
2013-12-21
Exynos 5420: Enable dynamic CBMEM
Stefan Reinauer
2013-12-21
Exynos 5250: Enable dynamic CBMEM
Stefan Reinauer
2013-12-21
google/pit: disable SYSMMU for graphics
Ronald G. Minnich
2013-12-21
Refactor code containing aux calls
Furquan Shaikh
2013-12-21
Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flags
Furquan Shaikh
2013-12-21
Add cpu transcoder attribute to intel dp
Furquan Shaikh
2013-12-21
Calculate transcoder flags based on pipe config
Furquan Shaikh
2013-12-21
peppy: Set optimal DTLE register values
Shawn Nematbakhsh
2013-12-21
slippy/falco/peppy: Fix EC wake events in S5
Duncan Laurie
2013-12-21
falco: Force enable ASPM on PCIe Root Port 1
Duncan Laurie
2013-12-21
falco: Disable unused clocks
Duncan Laurie
2013-12-21
falco: Enable EC controlled throttling
Duncan Laurie
2013-12-21
falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5
Duncan Laurie
2013-12-21
pit: Add missing elements to the edid data structure
Gabe Black
2013-12-21
pit: Bump the EC SPI bus speed up to 5 MHz
Gabe Black
2013-12-21
falco: add rtd2132 settings to device tree
Aaron Durbin
2013-12-21
Pit: set PWM to external on Parade
Ronald G. Minnich
2013-12-21
Pit: move parade writes to mainboard.c
Ronald G. Minnich
2013-12-21
peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.
Shawn Nematbakhsh
2013-12-21
FUI: Fill in link_m and link_n values
Furquan Shaikh
2013-12-21
Slippy: remove unneeded code in i915io.c
Ronald G. Minnich
2013-12-21
slippy/falco/peppy: Route USB to XHCI on resume
Duncan Laurie
2013-12-21
haswell boards: fix SATA interrupt in ACPI
Duncan Laurie
2013-12-21
slippy/falco/peppy: update ACPI C-state settings
Duncan Laurie
2013-12-21
lynxpoint me: add support for mbp clear wait in finalize step
Duncan Laurie
2013-12-21
Revert "lynxpoint: Move ME lock down to ramstage"
Duncan Laurie
2013-12-21
SLIPPY: final changes for FUI
Ronald G. Minnich
2013-12-21
peppy: Duplicate SPD data for 2GB configurations.
Shawn Nematbakhsh
2013-12-21
haswell boards: Use PECI temp sensor id 0
Duncan Laurie
2013-12-21
falco: Enable RTD2132 spread spectrum at 1.0%
Duncan Laurie
2013-12-21
bolt: make the gpio interrupts edge sensitive
Aaron Durbin
2013-12-12
bolt: Initial mainboard commit
Duncan Laurie
2013-12-12
HDA: Enable Mini-HDA and fix up PCH-HDA init
Duncan Laurie
2013-12-12
slippy/falco/peppy: make GPIO interrupts be edge triggered
Duncan Laurie
2013-12-12
falco: drive WLAN_DISABLE_L low in S3 and S5
Aaron Durbin
2013-12-12
exynos5420: Setup clocks for MMC bus controller.
Hung-Te Lin
2013-12-12
peppy: Add backward-compatible RAM_ID table.
Shawn Nematbakhsh
2013-12-12
Peppy: Update Realtek ALC283 verb table
Martin Roth
2013-12-12
falco: fix usb port settings
Duncan Laurie
2013-12-12
falco: Remove thermal thresholds that use CTDP
Duncan Laurie
2013-12-12
PIT: remove a comment that is incorrect.
Ronald G. Minnich
2013-12-12
snow: Fix the edid data structure definition so depthcharge works again.
Gabe Black
2013-12-12
peppy: RAM_ID + storage changes for next build.
Shawn Nematbakhsh
2013-12-12
peppy: Disable audio codec enable GPIO in S3 + S5.
Shawn Nematbakhsh
2013-12-07
peppy: Enable power limiting for thermal control
Duncan Laurie
2013-12-06
butterfly: Fix build without ChromeOS
Kyösti Mälkki
2013-12-05
google/link: use the new edid functions when in FUI mode
Ronald G. Minnich
2013-12-05
peppy: Disable forced dev mode.
Shawn Nematbakhsh
2013-12-05
Fix Makefile to include all copies of the SPD sources
Duncan Laurie
2013-12-03
slippy/falco/peppy: Fix Chrome OS GPIO export in ACPI
Duncan Laurie
2013-12-03
haswell boards: Enable VIRTUAL_DEV_SWITCH
Duncan Laurie
2013-12-02
Add option to disable ChromeOS
Kyösti Mälkki
2013-12-02
haswell: Update pei_data to match ref code
Duncan Laurie
2013-12-02
falco: Update panel power sequence timings
Duncan Laurie
2013-12-02
peppy: Port updates from slippy/falco boards
Duncan Laurie
2013-12-02
peppy: Add 2GB DRAM configuration.
Shawn Nematbakhsh
2013-12-02
peppy: Re-enable EC software sync
Shawn Nematbakhsh
2013-12-02
peppy: Update GPIO table + USB port map.
Shawn Nematbakhsh
2013-12-02
Add description to MAINBOARD_VENDOR string so it can be overridden
Duncan Laurie
2013-12-02
peppy: Add an inverted input GPIO type
Shawn Nematbakhsh
2013-12-02
falco/slippy: Fix DMIC nid verb.
Dylan Reid
2013-12-01
slippy/falco/peppy: Fix SPD GPIO initialization.
Aaron Durbin
2013-12-01
Butterfly: Force DDR refresh rate to 2x.
Shawn Nematbakhsh
2013-11-26
lynxpoint: Add an inverted input GPIO type
Duncan Laurie
2013-11-26
google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI`
Paul Menzel
2013-11-26
slippy/falco: Re-enable EC software sync
Duncan Laurie
2013-11-26
falco: update verbs for ALC283
Duncan Laurie
2013-11-25
slippy: update verbs for ALC283
Dylan Reid
2013-11-25
peppy: Add Elipda DIMM SPD
Shawn Nematbakhsh
2013-11-25
peppy: Initial mainboard commit
Shawn Nematbakhsh
2013-11-25
falco: Update DIMM SPD table
Duncan Laurie
2013-11-25
falco: Add panel power sequence timings
Duncan Laurie
2013-11-25
falco: Add on-board devices and configure GPIO irq/wake
Duncan Laurie
2013-11-25
slippy: Add on-board devices and configure GPIO irq/wake
Duncan Laurie
2013-11-25
falco: Add Elpida DIMM SPD
Duncan Laurie
2013-11-25
smbios: Add generic type41 write function
Duncan Laurie
2013-11-25
haswell: update pei_data data structure
Aaron Durbin
2013-11-25
falco: Initial mainboard commit
Duncan Laurie
[next]