Age | Commit message (Expand) | Author |
2018-04-16 | mb/google/octopus: Add Write Protect GPIO to cros_gpios | Hannah Williams |
2018-04-16 | mb/google/poppy/variants/nami: Add SPD file for Pantheon | Chris Zhou |
2018-04-16 | mb/google/poppy/variants/nami: Add SPD file for Pantheon | Chris Zhou |
2018-04-16 | google/kahlee: Resume on AC insertion | Marshall Dawson |
2018-04-16 | mb/google/kahlee: Select BT I2S PAD on ACP_BT_UART mux | Akshu Agrawal |
2018-04-16 | Revert "mb/google/reef/sand: Override USB2 phy settings" | Katherine Hsieh |
2018-04-13 | src/mainboard/kahlee: Turn on keyboard backlight on grunt | Martin Roth |
2018-04-13 | Revert "mb/google/reef: Override USB2 phy settings" | Tim Chen |
2018-04-13 | mb/google/kahlee: Fix IRQ routing | Richard Spiegel |
2018-04-13 | Revert "mb/google/coral: add usb2 phy setting override for some variants" | Tim Chen |
2018-04-12 | mb/google/octopus: Configure SMI for ESPI | Shaunak Saha |
2018-04-11 | mb/google/octopus: enable MRC recovery cache | Aaron Durbin |
2018-04-11 | mb/google/octopus: Select DRIVERS_SPI_ACPI | Furquan Shaikh |
2018-04-11 | src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG) | Jonathan Neuschäfer |
2018-04-11 | mainboard/google/kahlee: Enable Keyboard backlight for Grunt | Martin Roth |
2018-04-10 | mb/google/octopus: Capitalize MB part name | Justin TerAvest |
2018-04-10 | mainboard: Make OemCustomize.c available at romstage | Richard Spiegel |
2018-04-10 | mb/google/poppy/atlas: Fix SPD index in comment | Jonathan Neuschäfer |
2018-04-10 | mb/google/poppy: Disable rear camera for all vayne sku | Amanda Huang |
2018-04-09 | mb/google/octopus: Enable EC wake | Shaunak Saha |
2018-04-09 | mb/google/octopus/variants/baseboard: Add DPTF parameters | Sumeet Pawnikar |
2018-04-06 | mb/google/octopus: Edge trigger cr50 interrupt | Justin TerAvest |
2018-04-06 | mb/google/octopus/variants/baseboard: Enable DPTF support | Sumeet Pawnikar |
2018-04-05 | mb/google/poppy/variants/nami: Add SPD file for Vayne | chriszhou |
2018-04-05 | mainboard/google/kahlee: Update WP to active low | Martin Roth |
2018-04-04 | mb/google/octopus/variants/baseboard: Set PL1 and PL2 value | Sumeet Pawnikar |
2018-04-03 | mainboard/google/zoombini: Enable HAVE_ACPI_RESUME | Vaibhav Shankar |
2018-04-02 | mb/google/octopus: Fix Trackpad interrupt GPIO config | Hannah Williams |
2018-04-02 | mb/google/octopus: Make PMC I2C pads IOSTANDBY_IGNORE | Hannah Williams |
2018-04-01 | mb/google/octopus: update SSP port and DMIC 4CH nhlt support | M Naveen |
2018-03-30 | mb/google/octopus: Enable i2c4 which is the root port for audio codec | Shamile Khan |
2018-03-30 | mb/google/poppy: Add variant for Atlas | Duncan Laurie |
2018-03-29 | mb/google/octopus: Fix wifi configuration | Furquan Shaikh |
2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
2018-03-28 | sb/intel/common: Add common code for SMM setup and smihandler | Arthur Heymans |
2018-03-28 | mainboard/google/meowth: Disable debug consent and enable S0ix | Vaibhav Shankar |
2018-03-28 | mb/google/poppy/variants/nami: Add SPD file for sona. | Van Chen |
2018-03-27 | mainboard/google/poppy: Add SPD for Hynix H9CCNNNCLGALAR-NUD | Duncan Laurie |
2018-03-27 | mb/google/octopus: Remove emmc tuning parameters from devicetree | Furquan Shaikh |
2018-03-26 | mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF method | Seunghwan Kim |
2018-03-26 | mainboard/google/cheza: Add support for Cheza | T Michael Turney |
2018-03-26 | mb/octopus: Set PNP config to PNP_PERF_POWER | Shaunak Saha |
2018-03-24 | mb/google/octopus: Select TPM options only if mocktpm is not selected | Furquan Shaikh |
2018-03-23 | mb/google/zoombini: always report EC is in RO mode | Nick Vaccaro |
2018-03-22 | mb/google/zoombini: Enable NVMe | Nick Vaccaro |
2018-03-22 | mb/google/octopus: Add CLKREQ and de-emphasis settings for PCIe Wi-FI | Shamile Khan |
2018-03-21 | mb/google/fizz: Enable I2C bus 2 | Zhongze Hu |
2018-03-21 | mb/google/octopus: Re-size flash WP_RO segment | Srinidhi N Kaushik |
2018-03-21 | mb/google/octopus: Create bip variant | Justin TerAvest |
2018-03-21 | mainboard/google/kahlee: Update GPIOs based on board ID | Martin Roth |
2018-03-21 | mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_t | Zhuohao Lee |
2018-03-21 | mb/google/octopus: Enable TPM on GSPI | Ravi Sarawadi |
2018-03-21 | mb/google/poppy/variant/nautilus: Enable CABC feature as default | Seunghwan Kim |
2018-03-21 | mb/google/kahlee: Add register address mapping for FCH MISC | Akshu Agrawal |
2018-03-20 | mainboard/google/kahlee: Initialize EC earlier in the bootblock | Martin Roth |
2018-03-19 | mb/google/octopus: Configure PERST_0 pin | Justin TerAvest |
2018-03-19 | mb/google/octopus: Fix GPIO config for DRAM_IDs | Justin TerAvest |
2018-03-19 | mb/google/poppy: Config GPIO for DMIC by different sku id | amanda_hwang |
2018-03-19 | mb/google/octopus: Configure PCH_WP_OD early. | Justin TerAvest |
2018-03-19 | mb/google/fizz: Enable VMX | Shelley Chen |
2018-03-19 | soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uart | Richard Spiegel |
2018-03-17 | mb/google/octopus: Do not configure GPIO_149 as GPO | Furquan Shaikh |
2018-03-16 | soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array | Furquan Shaikh |
2018-03-16 | mb/google/eve: Update DPTF parameters | Duncan Laurie |
2018-03-15 | mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENH | Shelley Chen |
2018-03-15 | mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power Enable | Shelley Chen |
2018-03-15 | mb/google/octopus: Enable audio components. | Shamile Khan |
2018-03-14 | mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENH | Nicolas Boichat |
2018-03-14 | mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggered | Vincent Palatin |
2018-03-14 | mainboard/google/meowth: Enable System Agent dynamic frequency | Lijian Zhao |
2018-03-13 | mb/google/octopus: Add yorp variant | Justin TerAvest |
2018-03-13 | mb/google/poppy/variants/nautilus: Enable SAR configs | Furquan Shaikh |
2018-03-13 | mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4 | Furquan Shaikh |
2018-03-12 | mb/google/octopus: Fix lpddr4 skus | Justin TerAvest |
2018-03-12 | mb/google/zoombini/variants/meowth: change gpios to no-connects | Nick Vaccaro |
2018-03-12 | mb/google/poppy: Clear memory_params before initializing them | Nicolas Boichat |
2018-03-10 | meowth: Add SAR Sensor in devicetree | Gwendal Grignou |
2018-03-09 | mb/google/zoombini: re-enable software sync | Caveh Jalali |
2018-03-09 | mb/google/poppy/variants/nami: Fix typo in nami Makefile | Furquan Shaikh |
2018-03-09 | mainboard/google/kahlee: Set GPIO 40 to input | Martin Roth |
2018-03-09 | mainboard/google/kahlee: Disable Bayhub part on board_id 0 | Martin Roth |
2018-03-08 | mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDs | Shelley Chen |
2018-03-08 | mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1 | Daniel Kurtz |
2018-03-08 | mb/google/poppy : Get SKU_ID from EC for Nami/Vayne | amanda_hwang |
2018-03-08 | google/scarlet: Adjust K&D power sequence from software | Brian Norris |
2018-03-08 | mb/google/octopus: Add gpio configs for communities | Shaunak Saha |
2018-03-08 | mb/google/octopus: Add device tree settings | Shamile Khan |
2018-03-08 | mb/google/nautilus: Correct LINK FREQ of imx258 sensor | Alan Chiang |
2018-03-08 | mb/google/kahlee: Add SKU support | Simon Glass |
2018-03-08 | mb/google/poppy/variants/nami: Add WACOM EMR support | jasper lee |
2018-03-07 | mb/google/poppy/variants/nami: Add SPD files for nami | jasper lee |
2018-03-07 | mb/google/zoombini/variants/meowth: enable SAR power | Nick Vaccaro |
2018-03-07 | mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wake | Seunghwan Kim |
2018-03-07 | mb/google/poppy/variants/nami: Add memory detection logic | Shelley Chen |
2018-03-07 | mb/google/poppy/variants/nami: Add spd files | Shelley Chen |
2018-03-06 | google/snappy: enhance CCD type-A USB 2.0 phy strength | Kevin Chiu |
2018-03-06 | mainboard/google/fizz: Check HDMI HPD and DisplayPort HPD | Daisuke Nojiri |
2018-03-06 | mb/google/fizz: Skip FSP init for UART 0 | Duncan Laurie |
2018-03-06 | Revert "mainboard/google/meowth: enable PCH iSCLK" | Lijian Zhao |
2018-03-05 | mb/google/poppy: Allow use of optional secondary SPD | Furquan Shaikh |