summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-04-24mb/google/fizz: Set lid status as openNaresh G Solanki
2017-04-24mb/google/fizz: Configure PCI root portNaresh G Solanki
2017-04-24google/fizz: Configure memoryShelley Chen
2017-04-24*.asl: Remove obsolete reference to TPM ASL filePatrick Rudolph
2017-04-20mainboard/google/eve: Set touchpad IRQ to level triggeredDuncan Laurie
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
2017-04-19mainboard/google/poppy: Provide nhlt variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide memory configuration variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide cros_gpio variant APIFurquan Shaikh
2017-04-19mainboard/google/poppy: Add variant API for board_id and gpioFurquan Shaikh
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
2017-04-19mainboard/google/poppy: Prepare sharing directory for variantsFurquan Shaikh
2017-04-19mb/google/poppy: Add camera supportV Sowmya
2017-04-19mb/google/poppy: Add Image Processing Unit ASLSowmya
2017-04-18mainboard/google/poppy: Clean up gpio.h fileFurquan Shaikh
2017-04-18mainboard/google/poppy: Enable deep S3 in DC modeFurquan Shaikh
2017-04-15google/slippy: fix internal mic for falco/wolf variantsMatt DeVillier
2017-04-15mainboard/google/eve: Remove 'probed' setting from rt5663 codecDuncan Laurie
2017-04-14google/slippy: clean up NGI and move to libgfxinitMatt DeVillier
2017-04-14mainboard/google/eve: Remove ACPI ALS deviceDuncan Laurie
2017-04-14mainboard/google/eve: Set UART0 to skip initialization in FSPDuncan Laurie
2017-04-14mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPDDuncan Laurie
2017-04-13mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177Venkateswarlu Vinjamuri
2017-04-13mainboard/google/snappy: Increase weida touchscreen reset delayWisley Chen
2017-04-13google/eve: Disable Deep S3 in AC modeDuncan Laurie
2017-04-13google/eve: Enable WiFi SAR featureDuncan Laurie
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
2017-04-13mainboard/google/poppy: Enable internal pull-down on USB_C{0,1}_DP_HPDFurquan Shaikh
2017-04-13mainboard/google/poppy: Add support for cr50 SPI TPMFurquan Shaikh
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
2017-04-11google/eve: Limit memory SKU 5 to 1600MHzDuncan Laurie
2017-04-10google/eve: Update I2C bus timingDuncan Laurie
2017-04-083rdparty/libgfxinit: Update submodule pointerNico Huber
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
2017-04-05mainboard/google/reef: increase trackpad data hold timeAaron Durbin
2017-04-05mainboard/google/poppy: Change SD card detect to GPP_E15Furquan Shaikh
2017-03-29mainboard/google/reef: turn off DMIC_CLK_B1 in S0ixSathyanarayana Nujella
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-03-28chromeos / broadwell / jecht: Make save_chromeos_gpios() jecht-specificJulius Werner
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
2017-03-28vboot: Remove VBOOT_DYNAMIC_WORK_BUFFER Kconfig optionJulius Werner
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
2017-03-27mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.hFurquan Shaikh
2017-03-24mainboard/google/snappy: Update DPTF settingsWisley Chen
2017-03-23google/fizz: Update device tree from schematicShelley Chen
2017-03-23google/fizz: Transfer gpio from schematicShelley Chen
2017-03-23google/fizz: Remove poppy-specific configsShelley Chen
2017-03-23google/fizz: Add new boardShelley Chen
2017-03-22mainboard/google/reef: add nasher variantYH Lin
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
2017-03-21mainboard/google/poppy: Use sideband IRQ for SD Card DetectFurquan Shaikh
2017-03-21google/sand: Add Raydium touchscreen deviceKatherine Hsieh
2017-03-20mainboard/google/snappy: Update _hid name for weida touchscreenWisley Chen
2017-03-19mb/google/reef: Remove CPU throttling effect of the charger sensorSumeet Pawnikar
2017-03-17google/veyron: Clean out unused board variantsJulius Werner
2017-03-17google/veyron: Work around RAM code strapping errorJulius Werner
2017-03-17mainboard/google/poppy: Enable EC SW syncFurquan Shaikh
2017-03-16google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQRizwan Qureshi
2017-03-16google/eve: Use rt5663 interrupt as GpioInt instead of PIRQDuncan Laurie
2017-03-16mainboard/google/reef: Increase PL2 Max to 15WTim Chen
2017-03-15google/eve: Update MCU GPIOs configurationVincent Palatin
2017-03-15google/eve: Apply default AC/DC loadline settingsDuncan Laurie
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
2017-03-15google/eve: Use rt5514 instead of 4ch DMICDuncan Laurie
2017-03-15mainboard/google/reef: Add FPF_STATUS FMAP regionAndrey Petrov
2017-03-14google/sand: Remove support for tablet mode switchKatherine Hsieh
2017-03-12google/poppy: Enable internal pull-up on PWRBTN#Shobhit Srivastava
2017-03-10google/sand: Add devicetree.cb file for sandKatherine Hsieh
2017-03-10mainboard/google/reef: Modify TCPU, TSR2 and TRT tableTim Chen
2017-03-10mainboard/google/reef: Configure SDCARD card detect pinVenkateswarlu Vinjamuri
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
2017-03-09google/poppy: Configure SRCCLKREQ4 as No ConnectNaresh G Solanki
2017-03-09google/pyro: Update DPTF settingsKevin Chiu
2017-03-09mainboard/google/poppy: Enable cros_ec_keyb deviceFurquan Shaikh
2017-03-08mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup sourceFurquan Shaikh
2017-03-08google/eve: Configure GPIOs for new boardDuncan Laurie
2017-03-08mainboard/google/snappy: Override USB2 phy settingWisley Chen
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
2017-03-07google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000ZShunqian Zheng
2017-03-07google/veyron_*: Add new Micron and Hynix modulesDavid Hendricks
2017-03-07google/poppy: fix finger print sensor interrupt gpio configurationRizwan Qureshi
2017-03-02mainboard/google/poppy: Disable deep S3 on poppyFurquan Shaikh
2017-02-25mainboard/google/reef: keep LPSS_UART2_TXD high in suspend stateAaron Durbin
2017-02-25google/eve: Add rise/fall times for I2C busesDuncan Laurie
2017-02-24mainboard/google/poppy: Change touchscreen IRQ to level-triggeredFurquan Shaikh
2017-02-23google/gru: whitespace fixPatrick Georgi
2017-02-23google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection thresholdWilliam wu
2017-02-23google/gru: update the pwm regulatorCaesar Wang
2017-02-23mb/google/poppy: Enable support for DPTFSumeet Pawnikar
2017-02-23google/oak: Add initial support for RowanYidi Lin
2017-02-23google/gru: improve eye diagram for passing the testCaesar Wang
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
2017-02-22google/gru: Fix whitespacePatrick Georgi
2017-02-21mainboard/google/poppy: Enable Realtek 5663 supportRizwan Qureshi
2017-02-21mainboard/google/poppy: Enable Maxim MAX98927 codecRizwan Qureshi
2017-02-21mainboard/google/poppy: Generate required nhlt tableRizwan Qureshi