summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
2015-04-10Add google/veyron_mighty boardKatie Roberts-Hoffman
2015-04-10rockchip: support displayhuang lin
2015-04-10veyron*: select VIRTUAL_DEV_SWITCHDavid Hendricks
2015-04-10veyron: Adapt to new board revisionsJulius Werner
2015-04-10veyron_jerry: Port CPU overshoot preventionJulius Werner
2015-04-10veyron*: sdram_get_ram_code() -> ram_code()David Hendricks
2015-04-10veyron*: use gpio_base2_value() in board_id()David Hendricks
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
2015-04-10veyron_jerry: Remove board ID based assumptionsJulius Werner
2015-04-10veyron: Change eMMC enable pin to be pulled (not driven) highDoug Anderson
2015-04-10Add google/veyron_jerry boardKatie Roberts-Hoffman
2015-04-10storm: copy WiFi calibration data in the CBMEMVadim Bendebury
2015-04-10tegra132: Make non-vboot2 memlayout more usefulFurquan Shaikh
2015-04-10google/rush_ryu: Add speaker amp config for AD4567 on P0/P1Tom Warren
2015-04-10google/rush_ryu: Remove long delay when turning on AVDD_DSI_CSIJimmy Zhang
2015-04-10google/rush_ryu: audio: Setup clocks for AHUB, I2S1, codec, etc.Tom Warren
2015-04-10google/rush_ryu: devicetree: Add framebuffer resolution settingsJimmy Zhang
2015-04-10tegra132: Pass panel spec to lib_sysinfoJimmy Zhang
2015-04-10google/rush_ryu: devicetree: Add dsi panel mode settingsJimmy Zhang
2015-04-10google/rush_ryu: dsi: Enable panel related vdd and clocksJimmy Zhang
2015-04-10google/rush_ryu: Disable EC SW sync for proto boards before proto3Furquan Shaikh
2015-04-10urara: support building with CHROMEOS enabledVadim Bendebury
2015-04-10samus: Log EC panics to eventlogShawn Nematbakhsh
2015-04-10samus: Enable vr_slow_rampShawn Nematbakhsh
2015-04-10samus: Use codec internal 1.8V as DACREF sourceBen Zhang
2015-04-10samus: Set MICBIAS1 to 2.970VBen Zhang
2015-04-10samus: Adjust SATA Gen3 TX voltage amplitudeDuncan Laurie
2015-04-10samus: Add clear_recovery_mode_switch functionDuncan Laurie
2015-04-10samus: Set current backlight PWM valueDuncan Laurie
2015-04-10samus: Add ACPI binding for rt5677 codec SPIBen Zhang
2015-04-10samus: Add RT5677 ACPI/DT bindings with _DSDDuncan Laurie
2015-04-10samus: Move board version to a separate fileDuncan Laurie
2015-04-10vboot: add physical recovery switch supportDaisuke Nojiri
2015-04-10vboot: move vboot files to designated directoryDaisuke Nojiri
2015-04-10google/cosmos: don't enable CHROMEOS by defaultPatrick Georgi
2015-04-10google/rush: Add I2C1 init and audio clock enable/resetsTom Warren
2015-04-10google/rush_ryu: Add support for event logFurquan Shaikh
2015-04-10ryu: Enhance pmic access functionsJimmy Zhang
2015-04-10ryu: audio: Enable RT5677 audio codecTom Warren
2015-04-10ryu: Select pwr btn polarity based on board idFurquan Shaikh
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10rk3288: slowly raise to max cpu voltage to prevent overshoothuang lin
2015-04-10ryu: update board id definitionsAaron Durbin
2015-04-10ryu: remove board id normalizationAaron Durbin
2015-04-10google/storm: Minor board ID changesDan Ehrenberg
2015-04-10storm: Initialize clock, pinmux for NAND if present on boardDan Ehrenberg
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-10storm: retrieve MAC address from VPDVadim Bendebury
2015-04-09bg4cd: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-09bg4cd, cosmos: use SPI_WRAPPER configuration modeVadim Bendebury
2015-04-09pistachio: add SOC descriptorVadim Bendebury
2015-04-09pistachio: allow more room for bootblockVadim Bendebury
2015-04-09cosmos: add template for soc and board filesDaisuke Nojiri
2015-04-08rush: Add vboot2 supportFurquan Shaikh
2015-04-08ryu: Add vboot2 supportFurquan Shaikh
2015-04-08t132: Add vboot2 supportFurquan Shaikh
2015-04-08tegra124: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08ipq806x: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: support tsadchuang lin
2015-04-08rk3288: configure l2ctlr in romstagehuang lin
2015-04-08tegra132: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: Add early SRAM mappingJulius Werner
2015-04-07pistachio: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07exynos5420: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07exynos5250: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07broadwell: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-04-04rk3288: set cpu frequency up to 1.8GHzhuang lin
2015-04-04veyron_pinky/rk3288: Use KHz, MHz and GHz constantsJulius Werner
2015-04-04samus: Disable USB Port 5Duncan Laurie
2015-04-04samus: Add new memory typeDuncan Laurie
2015-04-04samus: Set codec PDM clock output to 3MHzBen Zhang
2015-04-04samus: Change touchscreen bootloader mode i2c addressDuncan Laurie
2015-04-04samus: Enable GSPI0 interfaceDuncan Laurie
2015-04-04samus: Enable GPIO9 as touchpad wakeDuncan Laurie
2015-04-04samus: Update thermal max for broadwellDuncan Laurie
2015-04-04samus: Assign GPIO2 to HP_AMP_SHDN_LBen Zhang
2015-04-04samus: Make codec interrupt active highBen Zhang
2015-04-04samus: Add codec platform data for jack detectBen Zhang
2015-04-04samus: Change GPIO controller label to INT3437:00Duncan Laurie
2015-04-04samus: Enable update screen for software syncDuncan Laurie
2015-04-04samus: Add smbios_mainboard_version to define board versionDuncan Laurie
2015-04-04samus: Add codec platform info in ACPIDuncan Laurie
2015-04-04Drop (empty) google/snow mainboard directoryStefan Reinauer
2015-04-04rk3288: Pass SPI bus speed in as parameter to init functionDavid Hendricks
2015-04-02pinky: Move some init to mainboard bootblockDavid Hendricks
2015-04-02rk3288/pinky: Move uart address to mainboard KconfigDavid Hendricks
2015-04-02Nyans: replace cpu_reset with hard_resetDaisuke Nojiri
2015-04-02urara: Configure UART line control to 8N1Ionela Voinescu
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 10:56:49 +0000