summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
enable protection of zero page access, provide for uncached device memory range, and protect against access outside of DRAM except to device registers. BUG=chrome-os-partner:28467 TEST=verified mmu.pagetable.list output: _______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________| C:00000000--000FFFFF| | | | | | | | | C:00100000--3FFFFFFF| A:00:00100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:40000000--428FFFFF| A:00:40000000--428FFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:42900000--43CFFFFF| A:00:42900000--43CFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:43D00000--5FFFFFFF| A:00:43D00000--5FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | Original-Change-Id: If9beb10938841aead5105d662f0aef741995d708 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200341 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 09dd137453d8c6f1b60692b01226498e22f34fb2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: src/mainboard/google/storm/mainboard.c Change-Id: Idff7e3f0bc5903933e9f1b980f595666380696d1 Reviewed-on: http://review.coreboot.org/8010 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03storm: enable early consoleVadim Bendebury
Include the required modules in romstage and enable early console. BUG=chrome-os-partner:27784 TEST=observe the romstage prompt in the console output: coreboot-4.0 romstage Tue May 13 17:08:58 PDT 2014 starting... Original-Change-Id: Ie3853b9afc53246e6eb997f279ccd4dbb08f748b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199673 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 6e643d3425ee226b3ebfbf329b35e7017f83d0c3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibdc695da634356988b3e551b0a9e4be2e129ccb4 Reviewed-on: http://review.coreboot.org/7997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
Squashed the correction patch with the original to avoid confusion in coreboot.org review. All what's needed apart from configuring the feature is to provide a function which would report the top of DRAM address. BUG=chrome-os-partner:27784 TEST=manual . with all other patches applied, the image proceeds all the way to trying to download 'fallback/payload'. Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Change-Id: Ifa586964c931976df1dff354066670463f8e9ee3 Original-Reviewed-on: https://chromium-review.googlesource.com/197897 (cherry picked from commit 54fed275fe80dee66d423ddd78a071d3f063464a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> storm: initialize dynamic cbmem properly Dynamic cbmem support has been enabled on storm, but the proper initialization at romstage is missing. Proper DRAM base address definition is also necessary so that CBMEM is placed in the correct address range (presently at the top of DRAM). BUG=chrome-os-partner:27784 TEST=build boot coreboot on ap148, observe the following in the console output: Wrote coreboot table at: 5fffd000, 0xe8 bytes, checksum 44a5 coreboot table: 256 bytes. CBMEM ROOT 0. 5ffff000 00001000 COREBOOT 1. 5fffd000 00002000 Original-Change-Id: I74ccd252ddfdeaa0a5bcc929be72be174f310730 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e2aeb2f4e7f3959d5f5336f42a29909134a7ddb7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I45f7016dd510fe0e924b63eb85da607c1652af74 Reviewed-on: http://review.coreboot.org/7996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
This change updates the cfg file for Hynix/Micron/Samsung 4GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I7621e60d8dcc568e0bb400a6c96b7f8909a15aa6 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/202059 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 04e74d2fb0fefa6a1786225638380c8831bd9481) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6615e34a17bb372eda9dd0844ecddbcde902ad7c Reviewed-on: http://review.coreboot.org/8008 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
This change forces storm platform to use the common CBFS SPI wrapper, which makes the SOC specific CBFS code unnecessary and requires including SPI controller support in all coreboot stages. BUG=chrome-os-partner:27784 TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ib468096f8e844deca11909293d90fc327aa99787 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197932 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 794418a132b5be5a2c049f28202da3cec7ce478d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I751c51c91f29da4f54fcfe05e7b9a2e8f956c4f2 Reviewed-on: http://review.coreboot.org/7994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
Combine four patches dependencies. These will not build individually, so combine them for coreboot.org upstream. samus: Move SPD handling to separate file The code to find the SPD data for the mainboard based on GPIOs is moved from romstage.c into spd.c. It relies on the updated pei_data structure from broadwell instead of the haswell interface. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Move PEI data structure init to separate file This needs to be executed in both romstage and ramstage for the different PEI binary stages. It uses the broadwell interface now instead of haswell. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199921 (cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Convert mainboard to use soc/intel/broadwell Switch from the haswell cpu/northbridge/southbridge interface to the soc/intel/broadwell interface. - Use new headers where appropriate - Remove code that is now done by the SOC generic code - Update GPIO map to drop LP specific handling - Update INT15 handlers, drop all but the boot display hook BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199922 (cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Add some code to print basic info from SPD The handling of LPDDR is a bit messy in Intel platforms. There is no traditional SPD so instead one is created by hand from the provided datasheets. These have varying (and sometimes unexpected) geometry and it can be important during bringup to know what configuration is being passed to the memory training code. This could in theory be put in a more generic location, but for now this is the only board with LPDDR3 where I have found it valuable. BUG=chrome-os-partner:28234 TEST=Build and boot on samus, look for SPD details on the console. CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199923 (cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d Reviewed-on: http://review.coreboot.org/7943 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus the pinmux E_OD bit of these two pins needs to be set to ensure GEN2 I2C pads work fine on 3.3V. BRANCH=nyan BUG=none TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c on blaze w/o this change. the waveform looks good on both scl/sda pins w/ this change. Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200996 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea Reviewed-on: http://review.coreboot.org/7952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
The kernel will not track wakeup events for devices unless they have a defined _PRW. There is no EC output of the lid signal coming to a GPIO and instead it pulses PCH_WAKE#. BUG=chrome-os-partner:27631 TEST=Manual on Rambi. - Run lidclose + lidopen on EC console, verify that wakeup_count increments. - Run lidclose + lidopen in rapid succession, verify that suspend request is aborted. BRANCH=Rambi. Original-Change-Id: I8d4c58a7bb37d7e474ec094fe96e46e1bfd980de Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200289 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit 08c6b42f1ed1af7fff6217e6b71469edd7ff4b2e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee813ed6f39cd3d5e0a2bdd395c740f82a1cf01a Reviewed-on: http://review.coreboot.org/7945 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
Implement Rambi clear_recovery_mode_switch() BUG=chromium:279607 BRANCH=TOT TEST=Verified recovery sequences on Rambi. Original-Change-Id: I481329d0f49584ad0314bd982b80bbc86112c2c0 Original-Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197781 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Original-Commit-Queue: Sheng-liang Song <ssl@google.com> Original-Tested-by: Sheng-liang Song <ssl@google.com> (cherry picked from commit 77e60a039f3d8328694a743e7cd15cce71b02f5d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I837151551b8aa68cf86b6fa1dd39b7b673d6a4d9 Reviewed-on: http://review.coreboot.org/7896 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
To avoid LCD_VCC glitch on cold reset, set SOC_DISP_ON as GPIO output high. After gfx initialize is done, set it to native function 2. BUG=chrome-os-partner:25159 BRANCH=firmware-rambi-5216.B TEST=Tested on Rambi and squawks, no LCD_VCC glitch anymore. Original-Change-Id: If16af498e910a8da1d77a9a66456eb767286a61a Original-Change-Id: Icf62588fa0338f89fafb3fe9246c26f16bcdaa60 Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197985 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 6f7d621678f22133c9825565fedc77d19198b08c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibaf547b8d1c27811a1bec9fa3254d559c505a361 Reviewed-on: http://review.coreboot.org/7893 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30nyan_blaze: Enable USB port2Neil Chen
There is a hub in USB port2 downstream. BUG=chrome-os-partner:28964 BRANCH=None TEST=emerge-nyan_blaze coreboot depthcharge chromeos-bootimage and verify usb port2 is workable Original-Change-Id: I0e698970729911f401f89594232f9d49e4da93cc Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200417 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9316acfe8791585f778eecead95943e6422ca419) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I76e4331ea6e803bfbbddefab449310421c0c1d9c Reviewed-on: http://review.coreboot.org/7949 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
BUG=none BRANCH=nyan TEST=built and booted on Big under various modes, verified that expected boot mode showed up using "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7 Original-Reviewed-on: https://chromium-review.googlesource.com/199691 Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff Reviewed-on: http://review.coreboot.org/7946 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
The IO accessor wrappers are used to allow integer register addresses. A structure defining UART interface configuration is declared and defined. A few long lines are wrapped. Interface functions are renamed to match the wrapper API. cdp.c is edited to fit into coreboot compilation environment, and the only function required by the UART driver if exposed, the rest are compiled out for now. BUG=chrome-os-partner:27784 TEST=after all patches are applied the serial console on AP148 becomes operational. Original-Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196662 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5e9af53a069cd048334a3a28f0a4ce9df7c96992) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Reviewed-on: http://review.coreboot.org/7874 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-26blaze: change ramcode 0001/0010 to use 792MHz bctJerry Wang
This change updates the cfg file for Micron/Samsung 2GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I840cdd967c3b38479946a497a91da89bef5a98ad Original-Signed-off-by: Jerry Wang <jerryw@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/199296 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit cb70674c6551c8c36d2fd2d220e0f677ed2c6b24) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I11222bc1453a76cc27c2be169be5d3481ed7cfe7 Reviewed-on: http://review.coreboot.org/7902 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
When a watchdog reset happens, the SOC will reset but other parts of the system might not. That puts the machine in a funny state and may prevent it from booting properly. BUG=chrome-os-partner:28559 TEST=Built for nyan, nyan_big and nyan_blaze. Booted normally, through EC reset, software reset ("reboot" command from the terminal), and through watch dog reset. Verified that the new code only triggered during the watchdog reset and that the system rebooted and was able to boot without going into recovery mode unnecessarily. BRANCH=nyan Change-Id: Id92411c928344547fcd97e45063e4aff52d2e9e8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/198582 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit b298be41c0959c58aeb8be5bf15141549da2504c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7900 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-26blaze: change ramcode 0000 to use 792MHz bctKen Chang
The original sdram-hynix-2GB-792.inc was just copied from nyan bct file. This change updates the cfg file for Hynix 2GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I9534b4df6d35193179de124309df12ed830098a0 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197660 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 797dabe54f2679bb5717961dda1947df453eb0f1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie67bedb29d5d9c3a3b58d949ddf9600716c385ec Reviewed-on: http://review.coreboot.org/7898 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
This is a fix for the 'Lost arb' we're seeing on Nyan* during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3 does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3 to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3 explicitly before accessing SD card. Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on U-Boot and can be removed. BUG=chrome-os-partner:27053 BRNACH=nyan TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot again. Without this patch, system will fail in loading kernel. Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196961 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a Reviewed-on: http://review.coreboot.org/7866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
When warm booting, SD card reader on Tegra 124 needs to be reset by setting power GPIO to zero. Since we don't really access SD card in Coreboot, set it to zero and let payloads enable power when they need to access SD cards. CQ-DEPEND=CL:196783 BRANCH=nyan BUG=chrome-os-partner:27053 TEST=emerge-nyan coreboot depthcharge chromeos-bootimage # With related changes in depthcharge, boots SD card successfully. Original-Change-Id: I2d368eb9480c978e9e343648b58a729028c94622 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196774 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 62bb7d04dff1a87474a8557f144b24e6b7d006ae) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3429535d0d032f9db89d8e70a525a6281102537a Reviewed-on: http://review.coreboot.org/7865 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
Some panels (including those on Big DVT) cannot work fine without link training before sending the video signals, especially multi-lane Full HD panels. We need to use the fast link training functions from kernel to support them. BRANCH=Nyan BUG=chrome-os-partner:28128, chrome-os-partner:28129 TEST=tested on nyan, nyan_big dvt. Vince verified on Full HD panels. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4 Original-Reviewed-on: https://chromium-review.googlesource.com/196162 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1 Reviewed-on: http://review.coreboot.org/7864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
In the normal mode case these settings aren't overwritten by the VBIOS because the VBIOS does not run. Therefore, the settings need to align with what the VBIOS programs so that there is a consistent panel power sequencing. BUG=chrome-os-partner:28267 BRANCH=baytrail TEST=Built and booted. Noted settings set by firmware for both dev and normal mode match. Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196822 Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com> (cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf Reviewed-on: http://review.coreboot.org/7846 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
The call was after the call to vboot_verify_firmware and so would only be called when falling back to RO, aka recovery mode. This change moves it to before vboot_verify_firmware so we'll always have the cbmem console. BUG=None TEST=Built and booted on nyan and verified that the cbmem console was the same as the serial output. Built for big and blaze. BRANCH=nyan Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196158 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5 Reviewed-on: http://review.coreboot.org/7777 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17tegra124: modify panel init sequenceKen Chang
Panel datasheet defines some delay between PWM signal out and backlight enable. This change fixes the current sequence and makes the delays adjustable by dt setting. BRANCH=none BUG=chrome-os-partner:28008 TEST=Verified on Big DVT and Nyan/Norrin panels. Panel works fine with dev mode, and the measurement of power on sequence meets panel requirements. Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196183 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3 Reviewed-on: http://review.coreboot.org/7776 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
Enable pinmux clamp function to avoid pinmux conflict. For pins which are configured to tristate enabled, the inputs to the controller will be clamped to zero. This can be used to avoid pinmux conflicts since the tristate bit is set to 1 in the power-on-reset pinmux setting. With pinmux clamp enabled, we need to configure all the input pins to tristate disabled. BUG=chrome-os-partner:27091 BRANCH=None TEST=built and booted successfully, display worked fine. Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194060 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0 Reviewed-on: http://review.coreboot.org/7775 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: Add eventlog supportDavid Hendricks
This enables event logging support for Nyan platforms. Right now this doesn't do a whole lot. We can add events in later CLs. BUG=none BRANCH=none TEST=built and booted for Nyan Rev. 1, eventlog gets initialized if necessary and can be printed by "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1 Original-Reviewed-on: https://chromium-review.googlesource.com/191200 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7 Reviewed-on: http://review.coreboot.org/7774 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-16blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204Neil Chen
hynix-2GB-204MHz/hynix-4GB-204MHz are not workable with Samsung RAMCODE. To replace them by samsung-2GB-204/samsung-4GB-204 for bring up purpose. BRANCH=none BUG=chrome-os-partner:27682 TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and boot to kernel successfully with all the RAMCODE Original-Change-Id: I7c2a96e84e6988dd739a9621ff93edc01703306a Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/195396 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org> (cherry picked from commit dc028c408be58f036fe125abc2e49e2c0cde0aa8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ieeb0250e42fb48c6089bc8dc95550c9b1694d7f8 Reviewed-on: http://review.coreboot.org/7772 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
PLLD, the clock for display, was previously hard-coded to 306MHz. To support more different panels, we should calcualte PLLD by panel pixel clock configuration. Note existing pixel clock configurations for nyan* boards won't work (they used to rely on hard-coded approximated values) so the device trees are also modified. BRANCH=none BUG=chrome-os-partner:25933 TEST=emerge-nyan_big coreboot chromeos-bootimage See panel correctly initialized and got DEV screen. Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193565 (cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916 Reviewed-on: http://review.coreboot.org/7762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO. Even though no problems were caused by this, correct it here so we get a conflict-free pinmux map. BUG=chrome-os-partner:27091 BRANCH=none TEST=Built and booted on Nyan, ran TegraShell "pinmux check" and saw no conflicts. Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194582 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c Reviewed-on: http://review.coreboot.org/7759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
href_to_sync and vref_to_sync are chip specific settings. Currently they are set to 1/2 of hfront_porch and vfront_porch respectively. However, to support EDID (CL192730), per David Ung, the safe values for both are 1 (the same settings as in kernel). BUG=none BRANCH=none TEST=built and booted on nyan. Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193504 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79 Reviewed-on: http://review.coreboot.org/7758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
This change takes about 8K of space away from the cbfs cache and repurposes it for the cbmem console buffer. This is a little more than twice the space we currently need for the bootblock and ROM stage to give us some room to grow and for extra debug output if needed. BUG=None TEST=Built and booted on nyan. Checked the cbmem output. BRANCH=None Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193169 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab Reviewed-on: http://review.coreboot.org/7757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
Set the appropriate config options and make the appropriate calls to perform vboot verification. The flashmap offset as well as the TPM information needs to be properly set. Lastly, call into vboot_verify_firmware() to perform the vboot verification when it is enabled. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built vboot verification on nyan. Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/190928 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5 Reviewed-on: http://review.coreboot.org/7743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
RAM module for RAMCODE 0010 (K4B4G1646Q) does not work with hynix-2GB-204MHz configuration. We need to replace it by hynix-2GB-792MHz. Also updated hynix-2GB-792MHz configuration from Nyan board folder. This commit is only for bring up stage. Once finish dram stress test, will update it again. BRANCH=none BUG=chrome-os-partner:27682 TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and boot to kernel successfully Original-Change-Id: Idfc503c944ac6120c92a4cf329f3fbe63b2c2a1c Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193737 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 91f21aa0cf9251b825e42d946d8cd41849c57447) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6293fa638c5b2577e502ba34a3cc6e6d5b7f2fdb Reviewed-on: http://review.coreboot.org/7742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.Neil Chen
There are some unexpected symbol at the end of each line in the generated .inc file when the config file is in DOS format (CR+LF). Modify cfg2inc to support DOS format cfg file by removing carriage return symbols from the end of each line. BUG=chrome-os-partner:27614 TEST=sudo cfg2inc.sh XXX.cfg # make a expected inc file BRANCH=nyan Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: I68b0f4b3805fcb5a6b633653c95afbafcb880a93 Original-Reviewed-on: https://chromium-review.googlesource.com/192697 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 38e90ab0d9110d3ede39c70e27961b833813a7d4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I30737600fa8ac12a45ad0fbc6086a624993794e7 Reviewed-on: http://review.coreboot.org/7741 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
To set the 8 different BCT as hynix-2GB-204 first. Once the corresponding BCT release from AE, change it. BRANCH=none BUG=None TEST=emerge-nyan_blaze coreboot builds OK Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: Ia42a4a5b85c561421ab8ae9aaf21c46a3c0a3513 Original-Reviewed-on: https://chromium-review.googlesource.com/191682 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Artiste Hsu <chhsu@nvidia.com> Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 27792db4a90ae00e066bb0b88968cf5f187edb1d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia648c8bdbbbc82bbc8508bead6ab24d8d0aa3fb2 Reviewed-on: http://review.coreboot.org/7740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher. To avoid it not being able to keep up, we reduce the frequency of that bus on all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we switch the clock source to CLKM. BUG=chrome-os-partner:22849 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193349 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7 Reviewed-on: http://review.coreboot.org/7739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
The SPI drivers for tegra and exynos5420 have code in them which waits for a frame header and leaves filler data out. The SPI driver shouldn't have support for frame headers directly. If a device uses them, it should support them itself. That makes the SPI drivers simpler and easier to write. When moving the frame handling logic into the EC support code, EC communication continued to work on tegra but no longer worked on exynos5420. That suggested the SPI driver on the 5420 wasn't working correctly, so I replaced that with the implementation in depthcharge. Unfortunately that implementation doesn't support waiting for a frame header for the EC, so these changes are combined into one. BUG=None TEST=Built and booted on pit. Built and booted on nyan. In both cases, verified that there were no error messages from the SPI drivers or the EC code. BRANCH=None Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191192 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id8824523abc7afcbc214845901628833e135d142 Reviewed-on: http://review.coreboot.org/7706 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id3b16872f62660393d938d6f95977a4e3842d0d1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7690 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
This config is used only to generate PIRQ table. If no such table is supplied there is no need for config. Change-Id: I537d440f53019a6bf7f190446074e75e7420545a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7566 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-01Mark non-executable files non-executablePatrick Georgi
No need to mark Makefiles, C files or devicetrees executable. Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-26sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.Vladimir Serbinenko
Southbridge already selects it, no need to repeat. Change-Id: I9a5ad553f48e30103371cc2d896168ae4abfb8ef Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7570 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-25google/butterfly: fix off-by-one issuesPatrick Georgi
GPIOs 32 and 64 used the wrong code path. Change-Id: I1d293cf38844b477cac67bc19ce5e5c92a6e93ca Found-by: Coverity Scan Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7577 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-23sandy/ivy/nehalem: Remerge interrupt handlingVladimir Serbinenko
On those chipsets the pins are just a legacy concept. Real interrupts are messages on corresponding busses or some internal logic of chipset. Hence interrupt routing isn't anymore board-specific (dependent on layout) but depends only on configuration. Rather than attempting to sync real config, ACPI and legacy descriptors, just use the same interrupt routing per chipset covering all possible devices. The only part which remains board-specific are LPC and PCI interrupts. Interrupt balancing may suffer from such merge but: a) Doesn't seem to be the case of this map on current systems b) Almost all OS use MSI nowadays bypassing this stuff completely c) If we want a good balancing we need to take into account that e.g. wlan card may be placed in a different slot and so would require complicated balancing on runtime. It's difficult to maintain with almost no benefit. Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7130 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-14Big, Blaze: Set I2S1 Source to CLK_M to Fix BeepDaisuke Nojiri
This is a companion patch of CL:191692 "Tegra: Fix Beep". TEST=Booted Big. Verified beeps at dev screen. Measured frequency by smartphone. Built Blaze. BUG=chrome-os-partner:26609 BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I9ba47d06202e9968a908c4a15cfbeac4bfe2c20c Original-Reviewed-on: https://chromium-review.googlesource.com/192063 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 87a0f166e493b98d2a4e597f90ede090161fffdb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id3b819745b0753862e8cfa43e7fa1ed4b27eb462 Reviewed-on: http://review.coreboot.org/7462 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14nyan: tpm: Increase the TPM frequency to 400 KHz.Gabe Black
The TPM now works correctly with the I2C bus running at 400 KHz. Running it at that frequency saves some boot time. CQ-DEPEND=CL:191634 CQ-DEPEND=CL:191793 BUG=chrome-os-partner:27220 TEST=Built and booted on nyan with and without EFS. BRANCH=None Original-Change-Id: I157308c2745342dc1ada4499433004c7ce1c6435 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191813 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 39a740d488d8f33ee698805bc2a8438263162cc8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I02978407e20cc9d526545157a3a3304729a91010 Reviewed-on: http://review.coreboot.org/7461 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-11-14Nyan: Set I2S1 Source to CLK_MDaisuke Nojiri
This is required to send 1.5Mhz clock to Max98090 and get a right beep sound. BUG=chrome-os-partner:26609 TEST=Booted Nyan. Verified Max98090 can beep. Measured frequency by smartphone. BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ie3ff6df6759cb23d78dc05069553ddb4eb8e508a Original-Reviewed-on: https://chromium-review.googlesource.com/191791 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 2f75a147f26ac334fff174a1f9618a2bbe290fe9) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If8c7871dc8202f98ccf23fb0afad1e7745fbf174 Reviewed-on: http://review.coreboot.org/7457 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14nyan: Move some pinmux and clock/reset configuration to ROM stage.Gabe Black
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM stage starts. That means we need to set up the pins for those busses, clock those controllers and take them out of reset. BUG=None TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other changes which implement EFS on nyan, saw EC and TPM communication work when in vboot. BRANCH=None Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191390 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0 Reviewed-on: http://review.coreboot.org/7456 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14t124: Clean up display init functionsJimmy Zhang
The existing display init functions were translated from a script. The new code will play the same functions but are cleaner and readable and easier to be ported to new panel. BUG=none TEST=build nyan and boot up kernel. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8 Original-Reviewed-on: https://chromium-review.googlesource.com/189518 Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Squashed to pass abuild nyan: Fix the build for big and blaze. The display code for the tegra124 was cleaned up recently, but only the nyan device tree was updated to match the new code, not big's or blaze's. This change copies nyan's device tree over to those other two boards which will get them building again. The settings may not be correct, but they'll be no less correct than they were before. I also updated the copyright date for nyan. BUG=none TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the panel wasn't damaged by the new display code or settings. BRANCH=None Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191364 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e Reviewed-on: http://review.coreboot.org/7454 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14blaze: Create a nyan_blaze mainboard, copied from nyan_bigTom Warren
The nyan_blaze board will have different BCT .inc files, to be added/updated later. GPIOs and some devicetree stuff may also differ. BUG=None TEST=Built nyan, nyan_big and nyan_blaze. BRANCH=None Original-Change-Id: I8b16fc71346cf973983aa046096b79cb83ad4bb6 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/190721 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit bea753131e2247a90cc5359fa5f603026d66c7ce) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I435ae78da2f6c4f1a78fea8300b6285e52272535 Reviewed-on: http://review.coreboot.org/7453 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan*: Switching unused pin to GPIONeil Chen
Switching unused pin to GPIO to avoid SPI1 conflicting. BUG=chrome-os-partner:26701 BRANCH=none TEST=Built and boot on Nyan Original-Change-Id: I7de5b8d015f6d02baadd41b1b272dfc49d17c376 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189970 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit edf12f441adb2395fe2718bed98d79eb3b128f6b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I562b58ba02825b16d374d9f0328f6c75431edc63 Reviewed-on: http://review.coreboot.org/7420 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Only delay when and as long as necessary in the PMIC setup code.Gabe Black
The PMIC setup code was unconditionally waiting for 10ms after each register write. It might be possible for there to be an excess of current from lots of rails switching around at the same time, but we can avoid that with a much shorter delay in a few strategic places. This change also moves the write to LDO3 to just under SD1 because LDO3 should track SD1. The duration and position for the delays and moving LDO3 were provided by Dan Coggin at nvidia. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan rev1. Measured a 230 ms decrease in boot time. BRANCH=None Original-Change-Id: I14805bf1b6242bdd0b286f37ae7d635c03909677 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189016 Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Daniel Coggin <dcoggin@nvidia.com> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 06c4d346deeb47809cd88655a9fa6712ceef9491) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3ce0bdeb4ee60499f6c192fe0803a4cab3d7a8af Reviewed-on: http://review.coreboot.org/7419 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Set the i2c controller frequencies appropriately.Gabe Black
These had been set to something fairly random which results in a very slow clock on the bus itself. The new settings take into consideration the speed the devices on the bus can run at. The TPM can't seem to handle speeds above 40KHz, but some documentation suggests that it should be able to handle up to at least 100KHz. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan rev1. Built for big. BRANCH=None Original-Change-Id: Iee98957c7e492c7dd08b071aeef3cce75c4a9e56 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189015 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit afca97a29aeb99d3899b713d0e57a3b3214f0d96) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iab0c50b2119ac322252564354c90b5cb2d255c97 Reviewed-on: http://review.coreboot.org/7418 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13Nyan: Set DMA Reserve to 2MBDaisuke Nojiri
When using LPAE, the address space is split to 2MB blocks. This change makes the space reserved for DMA consistent with the block size. TEST=Booted nyan with and without LPAE. Built nyan_big. BUG=None BRANCH=None Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I75c77484f6ca9f23b583ef651956d0265a9b4474 Original-Reviewed-on: https://chromium-review.googlesource.com/188571 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 16a40a48c2e3fc131a348d5e7d377d26f4b20aaf) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib79c9491dc504d28f811bbf0d91cffd292f5eb86 Reviewed-on: http://review.coreboot.org/7413 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: Select the CD570M Tegra124 model.Gabe Black
This indirectly selects an appropriate PLLX frequency so the main CPUs run as fast as they can but not faster. BUG=chrome-os-partner:25467 TEST=Booted on nyan rev1. BRANCH=None Original-Change-Id: Ibe61f5e35246b272771debf4fdf90c79b21eb5d0 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/188603 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 947ecbce3cb6e4d7ab07d3ffd5b4694ca6270cde) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9163ddea7f246ae7207a8a715ebae2c9627a7e37 Reviewed-on: http://review.coreboot.org/7410 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GBTom Warren
BUG=none BRANCH=nyan TEST=built and booted coreboot on my Nyan-rev1, browsed, ran Youtube vids, WebGL experiments, etc. Everything seemed OK. Original-Change-Id: I877680c9329ed96a0b602f0690acaa12079786d7 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/188550 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit b6ca59e9db26f7422fa43ade889c921257a36851) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If166938f241e2a4a8670bfce2df6591b4b71ff67 Reviewed-on: http://review.coreboot.org/7408 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: nyan_big: Mark the address range covering the SRAM as cachable.Gabe Black
The SRAM is very likely faster than going all the way out to DRAM for data, but I don't think it's part of the cores themselves and won't be as fast as the L1 caches. Enabling caching for this region reduces the time it takes to get to the payload by about 75% when serial output is disabled and the main part of display init is commented out. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I7ff26dea9d50e7d9a76e598e5654488481286b35 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/188459 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ac8b9b30490d511ca1b207af6845d50e08ac130f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If79dcd1b116f30b778788ba4fd45d362ff5d8e6e Reviewed-on: http://review.coreboot.org/7407 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: Add 4GB bct supportJimmy Zhang
Replace sdram entry 1 with valid configurations since nyan 4GB board uses RAM_CODE 1. BUG=none TEST=Flash and boot new image.bin. Console shows "RAMCODE=1" and "Total SDRAM (MB): 4096" BRANCH=none Original-Change-Id: Ia872bd7849f1b58075e1f97bf300e081293cb0d4 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/187450 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit f19e2ea3dd4d314b7540c7cf9a11d7af289d24d0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4914c3811b13c8cee0577101bc0c8ee32a0a5b81 Reviewed-on: http://review.coreboot.org/7406 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Check dram_end when setting up caching in ROM stage.Gabe Black
When setting up caching on nyan and big, we would set the region after DRAM to the end of the address space as uncachable. DRAM may actually extend beyond the end of the address space, so that may result in address aliasing or other problems. This change adds a check to make sure there's actually space there. BUG=None TEST=Built for big. BRANCH=None Original-Change-Id: Ic0a98550222f9dfc0aeafd67a2dd1c0c8f4ece44 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/186769 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1866a4d2a001beb97779b611b8b69c63175048f4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If1ca8b5bd4efab8962e03c0d9eaa70c0327ea6b5 Reviewed-on: http://review.coreboot.org/7405 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
This patch brings in ipq806x source files from the vendor's u-boot tree as it was published in the 'cs_banana' release. The following files are being copied: arch/arm/cpu/armv7/ipq/clock.c => src/soc/qualcomm/ipq806x/clock.c arch/arm/cpu/armv7/ipq/gpio.c => src/soc/qualcomm/ipq806x/gpio.c arch/arm/cpu/armv7/ipq/timer.c => src/soc/qualcomm/ipq806x/timer.c arch/arm/include/asm/arch-ipq806x/clock.h => src/soc/qualcomm/ipq806x/clock.h arch/arm/include/asm/arch-ipq806x/gpio.h => src/soc/qualcomm/ipq806x/gpio.h arch/arm/include/asm/arch-ipq806x/gsbi.h => src/soc/qualcomm/ipq806x/gsbi.h arch/arm/include/asm/arch-ipq806x/iomap.h => src/soc/qualcomm/ipq806x/iomap.h arch/arm/include/asm/arch-ipq806x/timer.h src/soc/qualcomm/ipq806x/timer.h arch/arm/include/asm/arch-ipq806x/uart.h => src/soc/qualcomm/ipq806x/uart.h board/qcom/ipq806x_cdp/ipq806x_cdp.c => src/mainboard/google/storm/cdp.c board/qcom/ipq806x_cdp/ipq806x_cdp.h => src/soc/qualcomm/ipq8064/cdp.h drivers/serial/ipq806x_uart.c => src/console/ipq806x_console.c Note that local timer.c gets overwritten with the original version. To prevent a build breakage some shortly to be reverted modifications had to be made to src/soc/qualcomm/ipq806x/Makefile.inc and src/soc/qualcomm/ipq806x/cbfs.c. BRANCH=none BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: I3f50bfbec2e18a3b5d2c640cff353a26f88c98c1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193722 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3c9c2ede7e97e330cad2c2f3e557cc9bcdaecdcc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia7bc66cecfc16f1dd4a9f3cb9840cbe91878adf4 Reviewed-on: http://review.coreboot.org/7263 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-12Include IPQ8064 SBLs code in the coreboot bootblockVadim Bendebury
We want the coreboot build produce an image which can be run on the target, even if the remaining parts of the bootprom (recovery path, read-write stages, gbb, etc.) are not available yet. This is achieved by including the Qualcomm SBLs blob in the bootblock. CQ-DEPEND=CL:193518 BRANCH=None BUG=chrome-os-partner:27784 TEST=manual . run the following commands inside chroot to confirm expected image layout (no actual code is executed on the target yet): $ emerge-storm coreboot $ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom 2>/dev/null | head -1 000000 d1 dc 4b 84 34 10 d7 73 15 00 00 00 ff ff ff ff $ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom | grep 220000 220000 05 00 00 00 03 00 00 00 00 00 00 00 00 00 01 2a Original-Change-Id: I10e8b81c7bd90e4550a027573ad3a26c38c3808a Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193540 (cherry picked from commit 64e193974ee448f78e0a5775a440094901590afb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idbdbeb9d229eff94a7a94af5dc4844a295458200 Reviewed-on: http://review.coreboot.org/7262 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
Repurpose config->pwm to mean the particular PWM device (we use PWM1 on nyan), and add code to program the PWM device. BUG=none TEST=emerge-nyan chromeos-coreboot-nyan, regenerate bootimage, and boot. See that the backlight comes up in the bootloader, and brightness can be adjusted via pwm_bl driver in the kernel. Original-Change-Id: I2db047e5ef23c0e8fb66dd05ad6339d60918d493 Original-Signed-off-by: Andrew Chew <achew@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185772 Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 0dee98dd0c8510ecd630b5c6cb9ea49724dc8b55) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie53610f3afa30b2d8f484685fb0e8c0b12cd8241 Reviewed-on: http://review.coreboot.org/7402 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12tegra124: Port a PWM clocking change to big.Gabe Black
The generic tegra124 code will use one of the PWMs to drive the backlight of the display, but the PWM clock was enabled only for nyan. This change enables it for big as well. BUG=none TEST=Built for Big BRANCH=None Original-Change-Id: I5171da7c41f4b4db931563ada3e8e4ebf74ec3d9 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/186767 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 687f3771fb3e6b340a818fa7594b3ac0630fdeaf) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifd14a22a98e7fe273ec28c460b928b8a83c84b66 Reviewed-on: http://review.coreboot.org/7404 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12tegra124: Enable PWM clock, and set up PWM1 pinAndrew Chew
Configure pin H1 for PWM1, and enable the PWM clock. BUG=none TEST=emerge-nyan chromeos-coreboot-nyan Original-Change-Id: I2f91ebd4666bd227686c08cedf3c1aa7abbe8215 Original-Signed-off-by: Andrew Chew <achew@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185770 Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 069636d9299f64dd64466d45d2297593b37df4f2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ic41515842fb883f44f228c77b4cd266e16124d99 Reviewed-on: http://review.coreboot.org/7400 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
We'd been putting some data structures like the framebuffer and the cbmem at the end of memory, but that may not actually be addressable as identity mapped memory. This change clamps the addresses those structures are placed at so they stay below 4GB. BUG=None TEST=Booted on nyan. Went into recovery mode and verified that there was a recovery screen. Forced memory size to be 4GB and verified that the recovery screen still shows up. BRANCH=None Original-Change-Id: I9e6b28212c113107d4f480b3dd846dd2349b3a91 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185571 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 63ea1274a838dc739d302d7551f1db42034c5bd0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I970c1285270cb648bc67fa114d44c0841eab1615 Reviewed-on: http://review.coreboot.org/7397 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-12nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.Gabe Black
If an asm blob isn't marked as volatile, gcc is free to throw it out if it doesn't think it produces any values that are actually used. To prevent that from happening, add volatile to some asm blobs in the nyan romstage code. BUG=None TEST=Booted on nyan rev1. BRANCH=None Original-Change-Id: I819e068e738e94ea749fcb72bba2eee080e1dfb1 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185610 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 76c09581d6ca4dc6c2f9048f599822939f439d11) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0b32197abf0ddc5f454f9c2415a65d98c60ca48b Reviewed-on: http://review.coreboot.org/7396 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
This patch changes several cache-related pieces to be cleaner, faster or more correct. The largest point is removing the old arm_invalidate_caches() function and surrounding bootblock code to initialize SCTLR and replace it with an all-assembly function that takes care of cache and SCTLR initialization to bring the system to a known state. It runs without stack and before coreboot makes any write accesses to be as compatible as possible with whatever state the system was left in by preceeding code. This also finally fixes the dreaded icache bug that wasted hundreds of milliseconds during boot. Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/183890 (cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97) nyan_big: apply cache-related changes from nyan This applies the same changes from 07a3592 that were applied to nyan. Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c Reviewed-on: https://chromium-review.googlesource.com/184551 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea) Squashed the followup patch for nyan_big into the original patch. Change-Id: Id14aef7846355ea2da496e55da227b635aca409e Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> (cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/6993 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
Change-Id: I3e9b7e0e5558a6942067dcea04b83fe3bccbbaf9 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7362 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-08bd82x6x: Move to common FADT.Vladimir Serbinenko
Change-Id: I04ed600796c55f5af4f0a07687f676e6484a9830 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7200 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-28mainboard/google/butterfly: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I167d2c9ad3f690de41fee51dd7800ce76b328e41 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7231 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-28mainboard/google/stout: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id5c5d68048169b0cd400926cead2d1835194d1a5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-28rambi: switch MCLK from 19.2Mhz to 25MhzKein Yuan
With following settings 1.Coreboot 25Mhz 2.Maxim codec configured with MCLK=25Mhz 2.I2C 400Khz fixed 4.Including Enable/Disable SHDN bit when LRCLK starts/Stops 5.Removed PLL toggle workaround routine. audio playing is smooth before/after S3, no noise when recording so change MCLK from 19.2 back to 25Mhz. BUG=chrome-os-partner:26948 BRANCH=firmware-rambi-5216 TEST=test audio play and record on Rambi, works fine. Change-Id: I5602feb39721344feab837ff4a3a18309a47a6a6 Signed-off-by: Kein Yuan <kein.yuan@intel.com> Reviewed-on: https://chromium-review.googlesource.com/193881 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit bfe1d535aa2f20a32e163abeb99f3d657e2b43ab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7219 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
We're no longer configuring hotplug + backlight settings from devicetree, so remove these entries + fields. BUG=chrome-os-partner:27304 TEST=Compile only. BRANCH=rambi+squawks Change-Id: I7e27fbc070a9ea774e7dcbe551d61b1b1682a47f Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/193831 (cherry picked from commit 4ab13fd3aa2634673bb099bdfd714a21adc3caa0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7218 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-28rambi: always show dev/rec screens on eDP connected panelKein Yuan
bit: 7 6 5 4 3 2 1 0 LFP2 EFP2 EFP3 CRT2 LFP EFP TV CRT so int 15 0x5f35 need to return 0x8(LFP/eDP) instead of 0x2(TV). BUG=chrome-os-partner:26365 BUG=chrome-os-partner:27505 BRANCH=rambi TEST=Booted with and without HDMI connected monitor. DEV screen always showed on eDP panel on Rambi. Change-Id: I8f876e78383424f517689eb25e9229a27739957b Original-Change-Id: I77edbeb3c86549f90302b4296b5a2f50313ca675 Signed-off-by: Kein Yuan <kein.yuan@intle.com> Reviewed-on: https://chromium-review.googlesource.com/193303 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit dd375462147f182331f336ba826108e58b4e0a47) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7216 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22tegra/nyan*: sdram updatesTom Warren
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU Reviewed-on: https://chromium-review.googlesource.com/183939 (cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1) nyan_big: Add initial 792MHz BCT Reviewed-on: https://chromium-review.googlesource.com/183975 (cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a) nyan_big: use RAM_CODE[3:2] for ram code Reviewed-on: https://chromium-review.googlesource.com/184076 (cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716) tegra124: support tri-state Board Id Reviewed-on: https://chromium-review.googlesource.com/183855 (cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4) nyan*: Fix SPI pinmux configuration Reviewed-on: https://chromium-review.googlesource.com/184281 (cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489) nyan_big: Add 4GB 204/792MHz BCTs Reviewed-on: https://chromium-review.googlesource.com/184159 (cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e) tegra124: Add function for obtaining DRAM size via MC regs Reviewed-on: https://chromium-review.googlesource.com/184535 (cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48) tegra124/nyan*: Obtain DRAM size dynamically Reviewed-on: https://chromium-review.googlesource.com/184431 (cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3) tegra124: Rearrange iRAM layout to allow more space for romstage Reviewed-on: https://chromium-review.googlesource.com/184240 (cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc) tegra124: Fix MemoryType field name in SDRAM parameters. Reviewed-on: https://chromium-review.googlesource.com/185113 (cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97) nyan_big: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/183624 (cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70) tegra124: move FB_SIZE_MB to a more appropriate location Reviewed-on: https://chromium-review.googlesource.com/184930 (cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc) nyan: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/185114 (cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b) tegra124: Save SDRAM parameters to PMC registers for LP0 Reviewed-on: https://chromium-review.googlesource.com/182928 (cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86) tegra124: Rewrite SDRAM parameter saving code to be more efficient Reviewed-on: https://chromium-review.googlesource.com/184388 (cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6) nyan: Slightly change the way SDRAM parameter files are set up Reviewed-on: https://chromium-review.googlesource.com/185286 (cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d) Squashed 16 commits for SDRAM support on nyan and nyan_big. Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6949 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-18lynxpoint: Consolidate common GNVS initVladimir Serbinenko
Change-Id: Ie8e4fffcec308d1cd5e696605e78671f3ababf40 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7054 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17bd82x6x: Consolidate common GNVS initVladimir Serbinenko
Change-Id: Iea035f80695623e4e8d53eea7e3ec294d868fb5b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7053 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17Add board_info for all Google/Intel boards mitting the fileStefan Reinauer
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7072 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-16smbios: Mark laptops as suchVladimir Serbinenko
Change-Id: I179a4cede2f826f72a400208748798737216c01a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7071 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-10-16bd82x6x: Move common bd82x6x S3 detect to bd82x6x code.Vladimir Serbinenko
Change-Id: I9ba1fa5f9ad38cb619466c6199eacd219bc53281 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6921 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16sandybridge: Move common northbridge finalize to northbridge code.Vladimir Serbinenko
Change-Id: I6d4178e5aaffc1330b0953b0601bf6b448250a8e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6920 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-01storm: Add generic support skeleton for stormFurquan Shaikh
Skeleton for storm mainboard Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/190724 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit ba371d410768fae169da929a23c40139d26a55d3) Removed 'select ARCH_ARM' and added 'select BOARD_ROMSIZE_KB_1024' to the Kconfig. Change-Id: I55c0ad6a47515ba4124b99a69d5776db2365f06e Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6975 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-09-29google/panther: add board_info.txtMatt DeVillier
Change-Id: Iec0397a981c31c8af3def04b8c170884f79a50cc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/6871 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-09-29google/panther: Be safe about invalid thermal readingsStefan Reinauer
In case we get an invalid thermal reading, let's run the fan at full speed rather than at low speed. This might impact the user experiance slightly in cases where the bad reading does not happen while the system is hot, but it will increase stability in the cases where the system is actually overheating. Also, set the critical temperature below tjmax, because otherwise thermal shutdown by the OS will never be triggered. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Iab262f1f17a5dff875c596d9e8d50e4e50ee90f9 Reviewed-on: https://chromium-review.googlesource.com/188556 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 721fc2361ea9c6fea75409be57726294ce840f03) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6962 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-09-25Peppy/Falco: always use native graphicsRonald G. Minnich
The products having shipped, and living in their own branch, we might as well enable native graphics since: 1. it works 2. it removes a blob and the only good blob is a dead blob 3. it's faster 4. when we have problems, we can diagnose them more easily 5. when we get to newer kernels the boot time will magically get faster as the driver realizes graphics is running. Where else do you get a 3-4 second speedup for free? Change-Id: Iad937320e7f46b1de7ab00dace04115a7f182ed1 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/181225 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 7b567d87a9fcf6736e90e730bd052e4465d57bdf) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6912 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-09-25snow: Rename snow to daisy.Gabe Black
The name snow goes by in many places in chromeos is daisy. Snow is technically a variant of daisy and should really be called daisy_snow, but for historical reasons the daisy board with no variant was used instead. To make it easier to work with within chromeos, this change renames the snow board to daisy. Change-Id: I569b31bf417db55be91832f15271bea4bc30f163 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/183553 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 13f24d967251c18dce2a00bcea915f448c4c6aa7) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6929 Tested-by: build bot (Jenkins)
2014-09-25peppy and falco: set panel power timings in northbridge, using devicetree, ↵Ronald G. Minnich
not mainboards Historically we had set panel timing in the mainboard gma code. This goes back to the replay-attack video startup. We can let the haswell gma code set these values from the device tree settings. Change-Id: If32150d2857241ca2d2c88880086f49d25815d76 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/180521 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 406eab3ca6a9bc59382866817786bf96bbb19d56) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6911 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-25pit: Rename pit to peach_pit.Gabe Black
The name pit goes by in many places in chromeos is peach_pit, where peach is the base name and pit is the name of this particular variant. To make it easier to work with within chromeos and to make the board names a little less ambiguous, this change renames the pit board to peach_pit, and from Pit to Peach Pit. Change-Id: I51c89ba3785cf4cb9769a989b1cac71bcd1b0a05 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/183552 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit cbbe1e9f04e34436a1bbae28628e0b5630d41054) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-09-24big: Create a nyan_big mainboard which is a copy of nyan.Gabe Black
The nyan_big mainboard is very similar to nyan, but will be different in a few ways. For instance, the BCT will be different, and the GPIOs may need to be configured slightly differently. This change also adds prefixes to the kconfig variables in "choice" blocks for both boards since having multiple instances of choice blocks with the same options confuses kconfig even if all of the instances have mutually exclusive dependencies. Change-Id: I290a32e47fc118bd4b86d543df617ad324325dbc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/183532 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d1a453fe1aa68b3d12936dd48cc6c94b54f81579) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6927 Tested-by: build bot (Jenkins)
2014-09-22google/{falco,peppy}/gma.c: Do not include non-existent "hda.h"Paul Menzel
Commit 75c83870 (azalia: Shrink boilerplate) [1] removed the header file `hda_verb.h`. This header is still included in the mainboard’s `gma.c`, causing the following build error, when native graphics initialization is enabled. CC mainboard/google/falco/gma.ramstage.o src/mainboard/google/falco/gma.c:34:22: fatal error: hda_verb.h: No such file or directory This was not caught, as native graphics initialization is not enabled for the build tests. It turns out that the array `mainboard_cim_verb_data` is not used in `src/mainboard/intel/wtm2/hda_verb.h`, so fix the problem by removing the inclusion. [1] http://review.coreboot.org/6840 Change-Id: I91e4f00a3030bdef0278102df2783258389bca13 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6946 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-22google/link, intel/wtm2: Do not include non-existent "hda.h" in i915.cPaul Menzel
Commit 75c83870 (azalia: Shrink boilerplate) [1] removed the header file `hda_verb.h`. This header is still included in the mainboard’s `i915.c`, causing the following build error, when native graphics initialization is enabled. CC mainboard/intel/wtm2/i915.ramstage.o src/mainboard/intel/wtm2/i915.c:34:22: fatal error: hda_verb.h: No such file or directory This was not caught, as native graphics initialization is not enabled for the build tests. It turns out that the array `mainboard_cim_verb_data` is not used in `src/mainboard/intel/wtm2/hda_verb.h`, so fix the problem by removing the inclusion. [1] http://review.coreboot.org/6840 Change-Id: Ic902581c6809a1069e169cc874678146a24d75f3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6945 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-22haswell: Move to per-device ACPIVladimir Serbinenko
Change-Id: Ic724dcf516d9cb78e89698da603151a32d24e978 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6814 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-22tegra124/nyan: memory and display updatesAndrew Bresticker
tegra124: use pll_c_out1 as sclk parent Reviewed-on: https://chromium-review.googlesource.com/180865 (cherry picked from commit 418337a5bde70df6a770222201c51bf3e8892d5f) tegra124: take LP cluster out of reset Reviewed-on: https://chromium-review.googlesource.com/180866 (cherry picked from commit 74cdc68ea9b29da9af313635787e82bacb9e23e3) tegra124: norrin: display code clean up Reviewed-on: https://chromium-review.googlesource.com/181003 (cherry picked from commit 63843ec61b3b47ffc985edcb589771591c5c9f17) tegra124: Change the display hack to use window A Reviewed-on: https://chromium-review.googlesource.com/182001 (cherry picked from commit ef245e42eb17b2eb0e8712f252353a95ee6fc01a) tegra124: norrin: Initialize frame buffer Reviewed-on: https://chromium-review.googlesource.com/182090 (cherry picked from commit b7c1d1b3c9519cbbe1615737aed4c4c0efed2167) nyan: do not enable pull-ups on SPI1 (EC) data pins Reviewed-on: https://chromium-review.googlesource.com/181063 (cherry picked from commit 2f55188501ebcae9e01b12831f152d4520c7047c) tegra124: Add source for the LP0 resume blob. Reviewed-on: https://chromium-review.googlesource.com/183152 (cherry picked from commit a00d099bf710c297320d7edff7f7c608283d1b0b) tegra124: Revise Memory Controller registers structure definition. Reviewed-on: https://chromium-review.googlesource.com/182992 (cherry picked from commit ae83564cdd1d46c8166df1a95703e8cb1060c0a1) tegra124: Add more PMC register details. Reviewed-on: https://chromium-review.googlesource.com/183231 (cherry picked from commit d62ed2c19693284f10c2a12f4295091de3ace829) tegra124: Add SDRAM configuration header file from cbootimage. Reviewed-on: https://chromium-review.googlesource.com/182613 (cherry picked from commit 193ed2a104af38f6c41a332a649ce06a3238e0a4) tegra124: Revise sdram_param.h for Coreboot. Reviewed-on: https://chromium-review.googlesource.com/182614 (cherry picked from commit 311b0568c5de627435a5b035a7a1e40ecc2672f8) tegra124: Fix EMC base address. Reviewed-on: https://chromium-review.googlesource.com/183602 (cherry picked from commit 587c8969292ccecfa29c7720bcf24c704ed4ac4e) tegra124: Add EMC registers definition. Reviewed-on: https://chromium-review.googlesource.com/183622 (cherry picked from commit 67a8e5c7e87a1cc6bf006ad806751b549ffd3d5a) tegra124: Never touch MEM(MC)/EMC clocks in ramstage. Reviewed-on: https://chromium-review.googlesource.com/183623 (cherry picked from commit 8e3bb34d4ae37feae89b4a39850b2988a334d023) tegra124: use RAM_CODE[3:2] for ram code Reviewed-on: https://chromium-review.googlesource.com/183833 (cherry picked from commit 0154239467064ffcbdb82fc4c6b629f5d0c3568d) tegra124: Allow setting PLLM (clock for SDRAM). Reviewed-on: https://chromium-review.googlesource.com/183621 (cherry picked from commit a534e5b7c61d655eedd409dbd7780a4f90d40683) tegra124: SDRAM Initialization. Reviewed-on: https://chromium-review.googlesource.com/182615 (cherry picked from commit 5a60ae93b0603ee0d4806132be0360f3b1612bce) tegra124: Get RAM_CODE for SDRAM initialization. Reviewed-on: https://chromium-review.googlesource.com/183781 (cherry picked from commit a5b7ce70525d7ffef3fac90b8eb14b3f3787f4d8) Squashed 18 nyan/tegra commits for memory and display. Change-Id: I59a781ee8dc2fd9c9085373f5a9bb7c8108b094c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6914 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-09-22snow/pit: include chromeos.c in romstageIsaac Christensen
When CONFIG_CHROMEOS is enabled, both systems currently fail to build romstage due to undefined symbols. Change-Id: I0edcb141b9a79fad6b1a629bf77cae656c3d6319 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6873 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
baytrail: combine SPI configuration in romstage Reviewed-on: https://chromium-review.googlesource.com/185140 (cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402) baytrail: lock down registers before handoff Reviewed-on: https://chromium-review.googlesource.com/185200 (cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e) baytrail: invoke SMM finalization on handoff Reviewed-on: https://chromium-review.googlesource.com/185201 (cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a) rambi: don't invoke SMM finalization Reviewed-on: https://chromium-review.googlesource.com/185202 (cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef) rambi: remove handling of APM_CNT_FINALIZE Reviewed-on: https://chromium-review.googlesource.com/185203 (cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab) baytrail: don't increment boot count on S3 resume Reviewed-on: https://chromium-review.googlesource.com/185381 (cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c) rambi: enable HDA device Reviewed-on: https://chromium-review.googlesource.com/184574 (cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196) baytrail: lock down spi controller according to mainboard Reviewed-on: https://chromium-review.googlesource.com/185631 (cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317) rambi: implement mainboard_get_spi_config() to lock dow spi controller Reviewed-on: https://chromium-review.googlesource.com/185632 (cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524) baytrail: introduce ssus_disable_internal_pull() Reviewed-on: https://chromium-review.googlesource.com/185740 (cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d) rambi: fix write-protect gpio reading at romstage Reviewed-on: https://chromium-review.googlesource.com/185741 (cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7) baytrail: DPTF: implement charger current limit Reviewed-on: https://chromium-review.googlesource.com/185759 (cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6) rambi: Enable charger participant and define states Reviewed-on: https://chromium-review.googlesource.com/185760 (cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137) baytrail: increase command wait timeout Reviewed-on: https://chromium-review.googlesource.com/185874 (cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc) baytrail: make caching MRC data more robust Reviewed-on: https://chromium-review.googlesource.com/185875 (cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8) baytrail: upgrade MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/186391 (cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885) rambi: instruct MRC to use weaker memory ODT settings Reviewed-on: https://chromium-review.googlesource.com/186420 (cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292) rambi: Move touch wakeup resource GPIO to separate device Reviewed-on: https://chromium-review.googlesource.com/186932 (cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef) baytrail: Set some MSRs related to turbo power Reviewed-on: https://chromium-review.googlesource.com/186933 (cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c) baytrail: change power consumption number for ACPI_C3/C6FS. Reviewed-on: https://chromium-review.googlesource.com/186934 (cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065) baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device Reviewed-on: https://chromium-review.googlesource.com/186928 (cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece) baytrail: Disable P-state HW coordination on 4-core SKU Reviewed-on: https://chromium-review.googlesource.com/187575 (cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78) baytrail: DPTF: Enable mainboard-specific _PDL Reviewed-on: https://chromium-review.googlesource.com/187576 (cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87) rambi: Apply DPTF tuning parameters Reviewed-on: https://chromium-review.googlesource.com/187577 (cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca) rambi : change lpe_codec_clk_freq to 19.2 Reviewed-on: https://chromium-review.googlesource.com/187594 (cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4) Squashed 25 commits for baytrail/rambi. Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2014-09-18samus: Enable XHCI mode by defaultDuncan Laurie
- Enable xhci_default setting in devicetree - Enable usb_xhci_on_resume setting for PEI Change-Id: I2a3965a222ce571a2ad43f568fc2d0ecb94a77bc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180673 (cherry picked from commit c5ef875f6d148964b8ad62a3fe79916c758dbc57) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6908 Tested-by: build bot (Jenkins)
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
rambi: Change RAM_ID GPIOs to GPIO_INPUT Reviewed-on: https://chromium-review.googlesource.com/182934 (cherry picked from commit 8afd981a091a3711ff3b55520fe73f57f7258cc0) baytrail: initialize rtc device Reviewed-on: https://chromium-review.googlesource.com/183051 (cherry picked from commit 1b80d71e4942310bd7e83c5565c6a06c30811821) baytrail: Set SOC power budget values for SdpProfile 2&3 Reviewed-on: https://chromium-review.googlesource.com/183101 (cherry picked from commit 87d49323cac4492c23f910bd7d43b83b3c8a9b55) baytrail: Set PMC PTPS register correctly Reviewed-on: https://chromium-review.googlesource.com/183280 (cherry picked from commit 1b520b577f2bf1b124db301f57421665b637f9ad) baytrail: update to version 809 microcode for c0 Reviewed-on: https://chromium-review.googlesource.com/183256 (cherry picked from commit 8ed0ef4c3bed1196256c691be5b80563b81baa5e) baytrail: Add a shared GNVS init function Reviewed-on: https://chromium-review.googlesource.com/183332 (cherry picked from commit 969dffda1d3d0adaee58d604b6eeea13a41a408c) baytrail: Add basic support for ACPI System Wake Source Reviewed-on: https://chromium-review.googlesource.com/183333 (cherry picked from commit a6b85ad950fb3a51d12cb91c869420b72b433619) baytrail: allow configuration of io hole size Reviewed-on: https://chromium-review.googlesource.com/183269 (cherry picked from commit 95a79aff57ec7bf4bcbf0207a017c9dab10c1919) baytrail: add in C0 stepping idenitification support. Reviewed-on: https://chromium-review.googlesource.com/183594 (cherry picked from commit 8ad02684b25f2870cdea334fbd081f0ef4467cd4) baytrail: add option for enabling PS2 mode Reviewed-on: https://chromium-review.googlesource.com/183595 (cherry picked from commit c92db75de5edc2ff745c1d40155e8b654ad3d49f) rambi: enable PS2 mode for VNN and VCC Reviewed-on: https://chromium-review.googlesource.com/183596 (cherry picked from commit 821ce0e72c93adb60404a4dc4ff8c0f6285cbdf9) baytrail: add config option for disabling slp_x stretching Reviewed-on: https://chromium-review.googlesource.com/183587 (cherry picked from commit f99804c2649bef436644dd300be2a595659ceece) rambi: disable slp_x stretching after sus fail Reviewed-on: https://chromium-review.googlesource.com/183588 (cherry picked from commit 753fadb6b9e90fc8d1c5092d50b20a2826d8d880) baytrail: ACPI_ENABLE_WAKE_SUS_GPIO macro for ACPI Reviewed-on: https://chromium-review.googlesource.com/183597 (cherry picked from commit 78775098a87f46b3bb66ade124753a195a5fa906) rambi: fix trackpad and touchscreen wake sources Reviewed-on: https://chromium-review.googlesource.com/183598 (cherry picked from commit 3022c82b020f4cafeb5be7978eef6045d1408cd5) baytrail: Add support for LPE device in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184006 (cherry picked from commit 398387ed75a63ce5a6033239ac24b5e1d77c8c9f) rambi: Add LPE GPIOs for Jack/Mic detect Reviewed-on: https://chromium-review.googlesource.com/184007 (cherry picked from commit edde584bb23bae1e703481e0f33a1f036373a578) rambi: Set TSRx passive threshold to 60C Reviewed-on: https://chromium-review.googlesource.com/184008 (cherry picked from commit 1d6aeb85fd1af64d5f7c564c6709a1cf6daad5ee) baytrail: DPTF: Add PPCC object for power limit information Reviewed-on: https://chromium-review.googlesource.com/184158 (cherry picked from commit e9c002c393d8b4904f9d57c5c8e7cf1dfce5049b) baytrail: DPTF: Add _CRT/_PSV objects for the CPU participant Reviewed-on: https://chromium-review.googlesource.com/184442 (cherry picked from commit e04c20962aede1aa9e6899bd3072daa82e8613bd) rambi: Move the CPU passive/critical threshold config to DPTF Reviewed-on: https://chromium-review.googlesource.com/184443 (cherry picked from commit dda468793143a6d288981b6d7e1cd5ef4514c2ac) baytrail: Fix XHCI controller reset on resume Reviewed-on: https://chromium-review.googlesource.com/184500 (cherry picked from commit 0457b5dce1860709fcce1407e42ae83023b463cd) baytrail: update lpe audio firmware location Reviewed-on: https://chromium-review.googlesource.com/184481 (cherry picked from commit 0472e6bd45cb069fbe4939c6de499e03c3707ba6) rambi: Put LPSS devices in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184530 (cherry picked from commit 52bec109860b95e2d6260d5433f33d0923a05ce1) baytrail: initialize HDA device and HDMI codec Reviewed-on: https://chromium-review.googlesource.com/184710 (cherry picked from commit 393198705034aa9c6935615dda6eba8b6bd5c961) baytrail: provide GPIO_ACPI_WAKE configuration Reviewed-on: https://chromium-review.googlesource.com/184718 (cherry picked from commit 44558c3346f5b96cf7b3dcb25a23b4e99855497b) rambi: configure wake pins as just wake sources Reviewed-on: https://chromium-review.googlesource.com/184719 (cherry picked from commit ee4620a90a131dce49f96b2da7f0a3bb70b13115) baytrail: I2C: Add config data to ACPI Device Reviewed-on: https://chromium-review.googlesource.com/184922 (cherry picked from commit ffb73af007e77faf497fbc3321c8163d18c24ec8) Squashed 28 commits for rambi and baytrail. Change-Id: If6060681bb5dc9432a54e6f3c6af9d8080debad8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-18slippy: remove FUI supportRonald G. Minnich
There's no reason to keep maintaining support on this mainboard, since nobody has one. Change-Id: I5c7c8ea4640170ba231fec82a94a54ee1876b845 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Reviewed-on: https://chromium-review.googlesource.com/180503 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit e291d82acbc8bf0d1372e11ac100a7dd340a0040) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6913 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 23:06:56 +0000