Age | Commit message (Expand) | Author |
2015-01-03 | mainboard/storm: setup mmu in storm mainboard_init | Deepa Dinamani |
2015-01-03 | storm: enable early console | Vadim Bendebury |
2015-01-03 | storm/ipq8064: add dynamic CBMEM support | Vadim Bendebury |
2015-01-03 | blaze: change ramcode 1000/1001/1010 to use 792MHz bct | Neil Chen |
2015-01-03 | storm: ipq8064: enable CBFS SPI wrapper | Vadim Bendebury |
2014-12-31 | samus: Combine mainboard patches to build soc/intel/broadwell | Duncan Laurie |
2014-12-31 | ipq8064/storm: UART enable and various fixes | Vadim Bendebury |
2014-12-31 | nyan*: Set GEN2 I2C pads to open-drain mode | Ken Chang |
2014-12-31 | rambi: Add _PRW for LID0 ACPI Device | Shawn Nematbakhsh |
2014-12-31 | rambi: Unconditionally clear the EC recovery request | Sheng-Liang Song |
2014-12-30 | Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitch | Kein Yuan |
2014-12-30 | nyan_blaze: Enable USB port2 | Neil Chen |
2014-12-30 | nyan*: Log boot reason in eventlog | David Hendricks |
2014-12-30 | ipq8064: prepare uart driver for use in coreboot | Vadim Bendebury |
2014-12-26 | blaze: change ramcode 0001/0010 to use 792MHz bct | Jerry Wang |
2014-12-26 | nyan*: Detect watchdog resets and reset the whole machine. | Gabe Black |
2014-12-26 | blaze: change ramcode 0000 to use 792MHz bct | Ken Chang |
2014-12-26 | nyan*: I2C: Implement bus clear when 'ARB_LOST' error occurs | Tom Warren |
2014-12-19 | nyan*: Clear VDDIO_SDMMC3 to reset SD card reader. | Hung-Te Lin |
2014-12-19 | nyan*: Disable SD card reader power gpio. | Hung-Te Lin |
2014-12-19 | nyan*: Add fast link training functions | Jimmy Zhang |
2014-12-17 | rambi: align gpu pipea settings with the VBIOS | Aaron Durbin |
2014-12-17 | nyan*: cbmem: Move the call to cbmemc_reinit. | Gabe Black |
2014-12-17 | tegra124: modify panel init sequence | Ken Chang |
2014-12-17 | nyan*: enable CLAMP_INPUTS | Ken Chang |
2014-12-17 | nyan*: Add eventlog support | David Hendricks |
2014-12-16 | blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204 | Neil Chen |
2014-12-16 | i2c: Replace the i2c API. | Gabe Black |
2014-12-15 | tegra124: Setup clock PLLD by approximating display panel pixel clock. | Hung-Te Lin |
2014-12-15 | nyan*: pinmux: fix PWM1/2 conflicts | Tom Warren |
2014-12-15 | tegra124: set safe values for href_to_sync and vref_to_sync | Jimmy Zhang |
2014-12-15 | nyan: Enable the cbmem console on nyan and allocate space for it in SRAM. | Gabe Black |
2014-12-15 | nyans: prepare for vboot verification of ramstage | Aaron Durbin |
2014-12-15 | blaze: Change RAMCODE 0010 to hynix-2GB-792MHz | Neil Chen |
2014-12-15 | nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config. | Neil Chen |
2014-12-15 | blaze: set 8 default BCT as hynix-2GB-204MHz | Neil Chen |
2014-12-15 | nyan*: Reduce the EC SPI bus frequency to 3 MHz. | Gabe Black |
2014-12-09 | spi: Factor EC protocol details out of the SPI drivers. | Gabe Black |
2014-12-07 | mainboard/google/samus: Fix usage of GNU field designator ext | Edward O'Callaghan |
2014-12-06 | Remove IRQ_SLOT_COUNT on all boards without PIRQ table. | Vladimir Serbinenko |
2014-12-01 | Mark non-executable files non-executable | Patrick Georgi |
2014-11-30 | Replace hlt() loops with halt() | Patrick Georgi |
2014-11-26 | sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER. | Vladimir Serbinenko |
2014-11-25 | google/butterfly: fix off-by-one issues | Patrick Georgi |
2014-11-23 | sandy/ivy/nehalem: Remerge interrupt handling | Vladimir Serbinenko |
2014-11-14 | Big, Blaze: Set I2S1 Source to CLK_M to Fix Beep | Daisuke Nojiri |
2014-11-14 | nyan: tpm: Increase the TPM frequency to 400 KHz. | Gabe Black |
2014-11-14 | Nyan: Set I2S1 Source to CLK_M | Daisuke Nojiri |
2014-11-14 | nyan: Move some pinmux and clock/reset configuration to ROM stage. | Gabe Black |
2014-11-14 | t124: Clean up display init functions | Jimmy Zhang |
2014-11-14 | blaze: Create a nyan_blaze mainboard, copied from nyan_big | Tom Warren |
2014-11-13 | nyan*: Switching unused pin to GPIO | Neil Chen |
2014-11-13 | nyan: big: Only delay when and as long as necessary in the PMIC setup code. | Gabe Black |
2014-11-13 | nyan: big: Set the i2c controller frequencies appropriately. | Gabe Black |
2014-11-13 | Nyan: Set DMA Reserve to 2MB | Daisuke Nojiri |
2014-11-13 | nyan: Select the CD570M Tegra124 model. | Gabe Black |
2014-11-13 | nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GB | Tom Warren |
2014-11-13 | nyan: nyan_big: Mark the address range covering the SRAM as cachable. | Gabe Black |
2014-11-13 | nyan: Add 4GB bct support | Jimmy Zhang |
2014-11-13 | nyan: big: Check dram_end when setting up caching in ROM stage. | Gabe Black |
2014-11-12 | Copy u-boot sources as is and modify the tree to still build | Vadim Bendebury |
2014-11-12 | Include IPQ8064 SBLs code in the coreboot bootblock | Vadim Bendebury |
2014-11-12 | tegra124: Program PWM1 to drive panel backlight | Andrew Chew |
2014-11-12 | tegra124: Port a PWM clocking change to big. | Gabe Black |
2014-11-12 | tegra124: Enable PWM clock, and set up PWM1 pin | Andrew Chew |
2014-11-12 | tegra124: nyan: Keep in memory structures below 4GB. | Gabe Black |
2014-11-12 | nyan: Use asm volatile instead of plain asm so it doesn't get optimized out. | Gabe Black |
2014-11-10 | arm: Redesign, clarify and clean up cache related code | Julius Werner |
2014-11-09 | src: Too many terminators ';;' at end of stmts, stop Skynet | Edward O'Callaghan |
2014-11-08 | bd82x6x: Move to common FADT. | Vladimir Serbinenko |
2014-10-28 | mainboard/google/butterfly: Fix usage of GNU field designator ext | Edward O'Callaghan |
2014-10-28 | mainboard/google/stout: Fix usage of GNU field designator ext | Edward O'Callaghan |
2014-10-28 | rambi: switch MCLK from 19.2Mhz to 25Mhz | Kein Yuan |
2014-10-28 | baytrail: Remove unused devicetree fields | Shawn Nematbakhsh |
2014-10-28 | rambi: always show dev/rec screens on eDP connected panel | Kein Yuan |
2014-10-22 | tegra/nyan*: sdram updates | Tom Warren |
2014-10-22 | baytrail/rambi: S3 support and other updates | Kein Yuan |
2014-10-18 | lynxpoint: Consolidate common GNVS init | Vladimir Serbinenko |
2014-10-17 | bd82x6x: Consolidate common GNVS init | Vladimir Serbinenko |
2014-10-17 | Add board_info for all Google/Intel boards mitting the file | Stefan Reinauer |
2014-10-16 | smbios: Mark laptops as such | Vladimir Serbinenko |
2014-10-16 | bd82x6x: Move common bd82x6x S3 detect to bd82x6x code. | Vladimir Serbinenko |
2014-10-16 | sandybridge: Move common northbridge finalize to northbridge code. | Vladimir Serbinenko |
2014-10-01 | storm: Add generic support skeleton for storm | Furquan Shaikh |
2014-09-29 | google/panther: add board_info.txt | Matt DeVillier |
2014-09-29 | google/panther: Be safe about invalid thermal readings | Stefan Reinauer |
2014-09-25 | Peppy/Falco: always use native graphics | Ronald G. Minnich |
2014-09-25 | snow: Rename snow to daisy. | Gabe Black |
2014-09-25 | peppy and falco: set panel power timings in northbridge, using devicetree, no... | Ronald G. Minnich |
2014-09-25 | pit: Rename pit to peach_pit. | Gabe Black |
2014-09-24 | big: Create a nyan_big mainboard which is a copy of nyan. | Gabe Black |
2014-09-22 | google/{falco,peppy}/gma.c: Do not include non-existent "hda.h" | Paul Menzel |
2014-09-22 | google/link, intel/wtm2: Do not include non-existent "hda.h" in i915.c | Paul Menzel |
2014-09-22 | haswell: Move to per-device ACPI | Vladimir Serbinenko |
2014-09-22 | tegra124/nyan: memory and display updates | Andrew Bresticker |
2014-09-22 | snow/pit: include chromeos.c in romstage | Isaac Christensen |
2014-09-19 | baytrail/rambi: spi, charger, and audio updates | Aaron Durbin |
2014-09-18 | samus: Enable XHCI mode by default | Duncan Laurie |
2014-09-18 | rambi/baytrail: ACPI, GPIO, audio, misc updates | Shawn Nematbakhsh |
2014-09-18 | slippy: remove FUI support | Ronald G. Minnich |