| Age | Commit message (Collapse) | Author |
|---|
|
Both eDP and MIPI interfaces are supported in geralt project, so we can
initialize the different displays according to the panel ID.
This patch also generalizes the display initialization. So
`configure_edp_panel_backlight` and `power_on_edp_panel` can be removed.
BUG=b:244208960
TEST=test firmware display pass for MIPI panel on MT8188 EVB.
Change-Id: I7ae9318f56c70446516e197635acaffb8197ab53
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70406
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both eDP and MIPI interfaces are supported in geralt project. Therefore,
we put the eDP panel data in panel_geralt.c to have the consistent
interface `get_active_panel` function.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ib35b3cab31bae4109b9715242201425580339536
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70405
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are eDP and MIPI panels supported in geralt. We put the panels'
specified functions - `power_on()` and `configure_panel_backlight()` in
panel_geralt.c. Also provide the common interface `get_active_panel()`
in panel.c to generalize the display initialization. Since each board
may support a different set of MIPI panels, we put the MIPI data in a
separate file panel_geralt.c.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: Ie928759e020a916f29f0364201a3cf202dc512c3
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The EN_PP3300_SD gpio (GPP_H13) was configured as a no-connect, but
should be configured as an output.
This change configures GPP_H13 on brya0 and skolas to be an output.
BUG=b:261901759
BRANCH=firmware-brya-14505.B
TEST="emerge-brya coreboot chromeos-bootimage" and verify skolas boots.
Change-Id: Ia3f01e877a5fea3af9a6e746523ed395f3af3b8a
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70512
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the schematic, we use the same backlight enabled GPIO
naming in eDP and MIPI panels.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: If8d3ca7098c6b22af41861bba74b764d71d27e1b
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70403
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to ID table(go/geralt-id), we add panel_id() to read the
panel id from auxadc channel 5.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: I2c0f4ee5a642c41dda9594fbaf2c63f2b2ebac6e
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70402
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to ID table(go/geralt-id), geralt only uses channel 4 for SKU
ID.
BUG=b:244208960
TEST=emerge-geralt coreboot
Change-Id: I0f7303b8809e6000e3e16228b00b525a77feee87
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70401
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar table for pujjo intel wifi config.
Use fw_config to separate different project settings.
BUG=b:256042825,b:256042769
Test=emerge-nissa coreboot
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ibdbe1c0a477e47af9cbbc9bf73ac583d06ad7a0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70480
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable unused I2C2/I2C4 bus for marasov.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Id1c41bfdca9b752e3f027e6b071629d67aa06761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70237
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Add new memory parts
- H58G56BK7BX068
- MT62F1G32D2DS-026 WT:B
- K3KL8L80CM-MGCT
BUG=b:261539879
TEST=run part_id_gen to generate SPD id
Change-Id: I74f35d1afad90c3b6a79679a8126904565695fbc
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70410
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit 52ccd293d7 ("mb/google/brya: Implement shutdown function for
dGPU") started unconditionally adding MPTS to the SSDT. On variants
with HAVE_WWAN_POWER_SEQUENCE selected, MPTS is already added to the
DSDT via wwan_power.asl. The duplicate definition results in a kernel
error:
ERR kernel: [ 0.109237] ACPI BIOS Error (bug): Failure creating named object [\_SB.MPTS], AE_ALREADY_EXISTS (20210730/dswload2-327)
ERR kernel: [ 0.109242] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210730/psobject-220)
Don't add MPTS to the SSDT if HAVE_WWAN_POWER_SEQUENCE is selected.
There are no variants which use both, so this should only result in
empty MPTS methods being removed.
BUG=b:260380268
TEST=On pujjo, the SSDT no longer contains an empty MPTS method, there's
no kernel error, and the WWAN power-off sequence is met.
Change-Id: I9f411aae81ea87aa9c8fc7754c3709e398771a32
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70146
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change override memory ID 3 to 1 to workaround the incorrect
memory straps in hardware.
We would use board_id 7 to identify the specific boards which need
to correct the memory ID.
BUG=b:259301885
BRANCH=Octopus
TEST=Verified on Phaser
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I2330b7e16a09f8cc76ed96e81a6165afa80a03a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70353
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PP1800_GPU_X should dynamically move from GPP_E18 to GPP_F12
depending on board revision.
PP0950_GPU_X (PEX) should remain on GPP_E10 for all board
revisions.
BUG=b:242752623
TEST=dGPU is functional on both revisions of the board
Change-Id: I20994fcac4d7b98ee893d5eb98b096c037d31d6c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70320
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change FSP board type to Type3.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
check MRC log "Maximum requested frequency" is 4800
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I69365bc726b4faac4cedb94cc7b08baa06056c1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70439
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCIe port 5 for WLAN device
BUG=b:261514079
BRANCH=firmware-brya-14505.B
TEST=Build and boot on marasov.
Ensure that the WLAN module is enumerated in the output of lspci.
localhost ~ # lspci
01:00.0 Network controller: MEDIATEK Corp. MT7921 802.11ax PCI Express Wireless Network Adapter
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I007501bb00e2b7b83de1292f3066874d07646cb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70442
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the SKU plan, add FW_CONFIG definition.
BUG=b:260473966
BRANCH=None
TEST=emerge-skyrim coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I727f69e8fe340cfe624adb5a49bd080ba9544786
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70418
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures to be able to drive SYS_SLP_S0IX_L `low` based
on the state of the system while `SLP_S0_L` signal is `low` (while
the system is in S0ix).
Implemented runtime ASL method (MS0X) being called by PEPD device
_DSM to configure `SLP_S0_GATE (GPP_H14)` PIN at S0ix entry/exit.
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One))
{
\_SB.PCI0.CTXS (0x75)
}
Else
{
\_SB.PCI0.STXS (0x75)
}
}
BUG=b:256807255
TEST=Able to see SYS_SLP_S0IX_L goes low in S0ix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie6b5e066f228ea5dc79ae14dd803fc283fd248ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70196
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Replace the amdblocks/gpio.h and soc/gpio.h includes with the common
gpio.h which will include soc/gpio.h which will include amdblocks/gpio.h
in the AMD SoC case.
Since baseboard/ec.h and indirectly baseboard/gpio.h files will get
included in the DSDT, the soc/gpio.h includes in those aren't replaced
with a gpio.h include for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib982e338b5c6bc145ec1a8f6dd75175a42dfb426
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70436
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the amdblocks/gpio.h and soc/gpio.h includes with the common
gpio.h which will include soc/gpio.h which will include amdblocks/gpio.h
in the AMD SoC case.
Since baseboard/ec.h and indirectly baseboard/gpio.h files will get
included in the DSDT, the soc/gpio.h includes in those aren't replaced
with a gpio.h include for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa82c10d10e4438b0437b78ddd95b5e823805571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70435
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2e1978f20b085f609cbeb0907374383f2d11fbf0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables V1p05 and Vnn external bypass VRs for Marasov.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Id28305b02e86f5ac55382ac6d2bd5e0453aae9b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Adjust the bit fields in the FW_CONFIG for Proto Phase.
BUG=b:254404046
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=marasov emerge-brya coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ia71269918092655c11c2b37a26ec19123f759650
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This patch enables S0ix for Google/Rex platform.
BUG=b:256807255
TEST=Able to program FADT table Bit 21 (Low Power Idle S0)
Change-Id: I79546267d29622c65321f7dfa29d3aac2fa59438
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70430
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Drop the __weak qualifier as this function is not overridden.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ica25b2bc4325ff9d27be672926b4e3b550c86e96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Replace the amdblocks/gpio.h, amdblocks/gpio_defs.h and soc/gpio.h
includes with the common gpio.h which will include soc/gpio.h which will
include amdblocks/gpio.h which will include amdblocks/gpio_defs.h in the
AMD SoC case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I37a33dd8821a00b7edfd1e5b593f71bea0e77630
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70434
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Replace the amdblocks/gpio.h, amdblocks/gpio_defs.h and soc/gpio.h
includes with the common gpio.h which will include soc/gpio.h which will
include amdblocks/gpio.h which will include amdblocks/gpio_defs.h in the
AMD SoC case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I13bc33b91f6e6d52867da9043bb386f3befac5fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70433
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
option STORAGE_EMMC 0
option STORAGE_NVME 1
BUG=b:239513596
TEST=FW_NAME=gladios emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I27baa2ca8c2b334fb81aa87b22c3b7c028c38cd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable Dynamic DPTC support.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I957511c44278a7cffb7cb5d7e099eb13232b6a1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
DTTS indicated Dynamic Thermal Table Switching.The proposal would like
to develop the schematic for switching 6 thermal table by lid status,
machine body mode and temperature. After entering the OS, the thermal
table would be table A. If the “Motion” or “Lid status change” is
detected. The thermal table would switch to laptop mode or lid close
mode.
Once the higher environment temperatures are detected,the thermal
table would switch to the corresponding power throttle table (B, D or
F). Based on these table switching mechanisms, no matter how the
end-user uses Chromebook,they could enjoy more humanized thermal
designs.
Release Over Over Release .
Temp. Temp. Temp. Temp. .
-------------------------------------------------------- .
Desktop mode Table A Table B 50C 45C .
Lid open (Default) .
-------------------------------------------------------- .
Desktop mode Table C Table D 55C 50C .
Lid close .
-------------------------------------------------------- .
Laptop mode Table E Table F 45C 40C .
-------------------------------------------------------- .
On the proposal, the transmission rules are list below:
1. Table A is the default table after booting.
2. A, C, E (Release Temp) can switch to each other.
3. B, D, F (Over Temp) can switch to each other.
4. A and B, C and D, E and F can switch to each other.
5. If Lid open/close or mode switch event trigger, temperature release
tables will translation to each other, temperature over tables will
translation to each other.After that event trigger, EC will check the
new temperature condition and decide if the temperature need to be
trigger.For example, if table A will switch to table D, table A will
switch to C with Lid close event, if temperature is over 55C, EC will
trigger temperature to switch form table C to D.
6. EC will trigger 3 times body-detection events during power on boot
without any body-mode and lid status change. For this case if the
previous table label is on same group, we will based on the temperature
to decide the table.
For example, assume table A is current table. When the temperature
reaches 50C, than the table is switched from A to B. The current table
is B. When the temperature is downgrade below 45C, the table is
switched form B to A. The same rule is for C and D, E and F.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I866e5e497e2936984e713029b5f0b6d54cbc9622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Enable STT and set 6 thermal table profiles for Dynamic Thermal Table
Switching Proposal support.
BUG=b:232946420
BRANCH=none
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ie0740cb5bb16cd53c2ee6937e32a974346012823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This patch generates the following for the mainboard:
Scope (\_SB)
{
Method (MPTS, 1, Serialized)
{
Local0 = \_SB.PCI0.RP06.RTD3._STA ()
If ((Local0 == One))
{
\_SB.PCI0.RP06.PXSX.DPTS (Arg0)
}
}
}
Change-Id: I27ade63cfe0586aee9f03ba816b2590f14dcb610
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70229
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
option STORAGE_EMMC 0
option STORAGE_NVME 1
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Idd52112743ee0d64aca630e54511503607770d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
LARS has two variants, LARS and LILI, which are differentiated via
the customization_id field in the VPD. To make differentiation easier
outside of ChromeOS (ie, for Windows/Linux drivers), set the SKU ID
based on VPD so it can be easily read via SMBIOS.
Modeled after similar code in google/reef (snappy variant).
TEST=build/boot lili variant, verify sku1 populated in SMBIOS tables.
Change-Id: I148462b6f86b25fa8db26ea6e1537d1a5e47984b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There are four requirements for the SMI to hit a printk()
this commit now removes.
Build must have DEBUG_SMI=y, otherwise any printk() is a no-op
inside SMM.
ASL must have a TRAP() with argument 0x99 or 0x32 for SMIF value.
Platform needs to have IO Trap #3 enabled at IO 0x800.
The SMI monitor must call io_trap_handler for IO Trap #3.
At the moment, only getac/p470 would meet the above criteria
with TRAP(0x32) in its DSDT _INI method. The ASL ignores any
return value of TRAP() calls made.
A mainboard IO trap handler should have precedence over
a southbridge IO trap handler. At the moment we seem to have
no cases of the latter to support, so remove the latter.
Change-Id: I3a3298c8d9814db8464fbf7444c6e0e6ac6ac008
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I4819909cf9460ca550af38ca73a50220b77a385f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
DmaProperty must only be present on endpoint devices.
BUG=b:259716145
TEST=TBD
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic5be85c3d13250646867f8c8f5950796ec339551
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Function definitions without a type a deprecated in all versions of C.
Change-Id: I2efb42e653b0deb56ba6b0c9789764a9cabc552e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70138
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SOC_AMD_COMMON_BLOCK_ACPI_DPTC for Morthal boards, to enable
support for the low/no battery boot feature.
BUG=b:217911928
TEST=build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I3eb6bee6601e34420a90f33f8f2c45cf3fe37f9b
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70216
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I20c3298a920396718f0dc036e57faf8e46b82b2c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70253
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the RPL CPU power limits to kano and zydron's power limit table.
BUG=b:261127266
BRANCH=brya
TEST="emerge-brya coreboot chromeos-bootimage", flash zydron with
image-zydron.serial.bin and verify zydron boots successfully to kernel.
Change-Id: I369c5d7a9a3db0c3e7184a23b0f159ed715b5a50
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70238
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For geralt project, we also support MIPI panel as our firmware display.
So add this patch to configure ddp to choose eDP display or MIPI panel
display.
BUG=b:244208960
TEST=test firmware display pass for both eDP and MIPI panel on MT8188
EVB.
Change-Id: I06f38b1889811274588c26e9284da4d502acf38b
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70181
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Zork boards will not boot without PSP verstage/VBOOT, so select it
by default.
Change-Id: I2447bf69baefd5560a0153dcd3d9b87b0a91a3f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69763
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.
Additionally, added the RTD3 entries for the SD controller.
Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.
BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enable this feature, and it can use the probe statement in devicetree
to cache of fw_config field as oem string.
TEST=With CBI FW_CONFIG field set to 0x1561
localhost ~ # dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: AUDIO-MAX98357_ALC5682I_I2S
String 2: CELLULAR-CELLULAR_PCIE
String 3: UFC-UFC_MIPI
String 4: WFC-WFC_MIPI
String 5: DB_SD-SD_GL9755S
Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NVMe is determined by a logical bit 1, not the physical SKU pin.
Thus, (logical) sku_id & 0x2 == 0x2 would mean that the device has
NVMe enabled on it. Previously, I thought that it was tied to a
physical pin, but this is not correct.
BUG=b:254281839
BRANCH=None
TEST=flash and boot on villager and make sure that NVMe is not
initialized in coreboot.
Change-Id: Iaa75d2418d6a2351d874842e8678bd6ad3c92526
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70230
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add WiFi SAR table for zydron.
BUG=b:260770999
TEST=build FW and checked SAR table can load by WiFi driver.
Change-Id: I8d5f966c7af3ac6d9923d4f6c851bfb340f31fab
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The Piglin & Hoglin boards were built with a couple of different sizes
of ROM chips. Despite this, the desire was to use just a single FMD
file. The different sizes are already accounted for in Kconfig, so
add the Kconfig size here to be used.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ia75725b0c4d61e832c94160fa4cd455e89c60274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust scl_lcnt, scl_hcnt, sda_hold value for I2C5 to meet
touchpad SPEC.
BUG=b:260540852
BRANCH=firmware-brya-14505.B
TEST=build, checked TP function work normally,
and measure the timing meet SPEC
tLOW ~1.72 us
tHIGH ~0.63 us
tHD ~0.69 us
fscl 383 kHz
Change-Id: I9036a604a90558911c4f8a492db9f1f0f28bf404
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fine-tune eMMC DLL based on Xivu EVT system.
BUG=b:256538132
TEST=executed 3000 cycles of cold boot successfully
Change-Id: Iaa8338fd0faa0e01f42ee77dea135c7a241ed3be
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69892
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTC support for frostflow.
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iac7b8789a5189827fe98cb06328d666300841a5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69931
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer to brask board to add audio settings for gaelin.
BUG=b:253177160
BRANCH=firmware-brya-14505.B
TEST=Able to verify audio playback on gaelin with kernel v5.10.
Change-Id: Ibc8cacce6cb4b3e55fc7332bb9eb9ac20848fc5b
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Modify USB2.0 port[4] settings to support camera.
BUG=b:238252678
BRANCH=firmware-brya-14505.B
TEST=with brask overlay changes, camera in camera app works
Change-Id: I42325b75e129429ee451ded6a2086fd3808e581a
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add new audio sku configure for Pujjo board.
BUG=b:260538412
TEST=Boot to OS on pujjo and check that audio are configured
based on fw_config.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ia9ddc683945002a0b19efd67006e1983b2eb9f2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Instead of using a fake lapic device hook up the cpu cluster to chip
cpu/intel/model_206ax.
The lapic device is also not needed as the mp init will allocate it for
the BSP at runtime.
Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When retrieving the SKU id value through the sku_id() function in
mainboard_needs_pcie_init(), we only want the values in the lower 5
bits as we can only represent SKU id up to 27. Everything in the
higher bits should be masked out because they are not needed.
BUG=b:254281839
BRANCH=None
TEST=Make sure that NVMe is not initialized
Tested on a herobrine board with SKU id 0
Change-Id: I0e786ec392b5e1484cb2ff6d83a8d4fdd698950c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70164
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we are getting the sku id from the EC every time we call
the sku_id() function. However, this will never change so we only
need to retrieve it once. Inserting exit condition if sku id is
already set, then don't get it from the EC again.
Also, removing the ram_code function, which does nothing right now.
There is already a weak stub_function for this in
src/lib/coreboot_table.c that already does the same thing.
BUG=b:260740438,b:182963902
BRANCH=None
TEST=make sure image still boots to login on herobrine device
Change-Id: Ia787968100baf58a41ccce0cf95ed3ec9ce1758a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
|
|
Expand DPTC_INPUT macro to supoort 13 DPTC thermal table parameters for
dynamic table switching support.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I6d6a00f0eca0b0941860b9bc75da41d7a10d60e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
FSP silicon discards the request if the Voltage Regulator or SoC does
not support the feature.
BUG:b:259057787
TEST:Verify that the feature is enabled by reading from pcode
No PnP regression observed
BRANCH=firmware-brya-14505.B
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e318534f1429af8ec06048430966344ddd346a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69579
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Jeremy Compostella <jeremy.compostella@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This only moves CPU configuration to a common place. Other PCI devices
can be done in follow-ups.
Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch supports multiple camera modules based on FW_CONFIG.
BUG=b:251235140
TEST=Test the changes with ov2740/hi556 camera.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0a4f46d889e9f6c2898efee6825cf2d02252d87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jim Lai <jim.lai@intel.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
This patch enables crashlog for all brya projects.
BUG=b:190756531, b:259978562
BRANCH=None
TEST=emerge-brya coreboot chromeos-bootimage & ensure the crashlog
PCIe device 0xa.0 is enabled and intel-pmt kernel driver is
loaded.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ib632c8ac9ea7a4f0e0b08b96eb149f8ef1386be0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68526
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This change disables unused PCIE RP8 and CLKSRC4. Without this change
sasukette cannot enter into s0ix properly.
BUG=b:259891452
TEST=Build and verified in sasukette
Change-Id: I61bcefa128d4f39613a760b647048f9e19e262c2
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add ACPI DmaProperty for ethernet devices.
BUG=b:259716145
TEST=Verified SSDT on google/osiris.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I647593fd02644d30cd21b60d8305c0ec55dc64cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70017
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=TBD
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ifaa0912b38129ed2db01fb78ed39c0db89e746fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70018
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0100 for memory Samsung K3LKBKB0BM-MGCP.
Add new ram_id:0101 for memory Samsung K3LKCKC0BM-MGCP.
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNCP3MLYR-N6E 1 (0001)
MT62F2G32D8DR-031 WT:B 2 (0010)
H9JCNNNFA5MLYR-N6E 3 (0011)
K3LKBKB0BM-MGCP 4 (0100)
K3LKCKC0BM-MGCP 5 (0101)
BUG=b:254758998
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I8ff879ff7185f5a0ca1b9632820aba3b0f5d02c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Set Package Power Parameters from AMD DevHub document #57316.
"stapm_time_constant_s" = "200"
BRANCH=none
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I15a69df1436aba05bc19eaffd79394e5ca9bdb3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69565
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
The Skyrim devices share a common set of DPTC values to enable booting
with low/no battery. Rather than duplicating them in each variant's
overridetree.cb, move them into the baseboard/devicetree.cb.
BUG=b:217911928
TEST=tast run <IP> power.ShutdownWithCommandBatteryCutoff
Change-Id: I20f0a8259c2fc986da23026da88feadd69942046
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69904
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Name a variable based on its utility. `is_external` variable adds
`ExternalFacingPort` _DSD property to an ACPI device hence
rename it to `add_acpi_external_facing_port`.
BUG=b:259716145
TEST=Build google/rex with this flag and verify it in SSDT at
runtime.
SSDT snippet:
Name (_DSD, Package (0x04) // _DSD: Device-Specific Data
{
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package (0x01)
{
Package (0x02)
{
"HotPlugSupportInD3",
One
}
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package (0x01)
{
Package (0x02)
{
"ExternalFacingPort",
One
}
}
})
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I65100283ed9b65037c9890f28ecab41fcfa25d83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69970
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematic to update the gpio table.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=marasov emerge-brya coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I03b443826d39182eaf23ad3e4e0ba8d6b8a93022
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69180
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
SATA is not supported on google/rex hence disable it.
BUG=none
TEST=Build and boot to google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I35a742ab9782feed86c3af514505d870d181b34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable NVMe GPIOs based on fw_config and add NVMe to devicetree.
Note, eMMC and NVMe are not probed in devicetree. On first boot in
factory, the device needs to boot with unprovisioned fw_config, so all
storage devices should be enabled when unprovisioned. Currently,
devicetree disables all probed devices when unprovisioned. If we want
eMMC and NVMe to be probed, support needs to be added for enabling
probed devices when unprovisioned.
BUG=b:259211172
TEST=Verified by ODM. On craask, LTE and WCAM still work. On craaskneto,
eMMC and NVMe SKUs can both boot.
Change-Id: I76a056cddff2246cfb5bb26ddbdfc333b49d9aaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69958
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow thermal table from thermal team.
1. Modify TS1 passive policy to 68.
BUG=b:249446156
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I8539a29cab4863034a2b64d38aef4b772473246d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69960
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A function declaration without a prototype is deprecated in all versions
of C.
Change-Id: Ie22231908233f2fba25d78f6c5f53940011e8158
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69748
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add conn0/conn1 for pch_espi.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5969d2941c02400788d66521680fcd13d3a6b13f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69785
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare touchscreen and touchpad under I2C3 and I2C5
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=Built successfully
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifc865fc0c0c42af0d74272289c562e347fac3a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69467
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust SPD ID order
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 2 (0010)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3a62cf355508debce387c48d9d089e73763b2bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69784
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding cros_gpios for crossystem to access WP GPIO
BUG=b:258048687
TEST= run FAFT firmware_WriteProtect passed.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ieac1df805c6399aefdc13aae136630d496aacd58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69924
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The brask doesn't include a real chassis so we don't need to configure
the fan setting in the overridetree.cb. Instead, we can leave the fan
running at full speed after the device boot up.
BUG=b:259643676
BRANCH=firmware-brya-14505.B
TEST=flashed the bios to the device and make sure the fan spinned
at full speed.
Change-Id: I6075b6171ca4d7b907679efd0ce7e355759385bc
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on the latest schematic to update the gpio table.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ifaf0629dcd77d21cf09fe84e760f1f22c075467f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Override devicetree configuration based on the latest gaelin schematic.
BUG=b:249000573, b:254375472
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=emerge-brask coreboot
Change-Id: I3a741feec52cf73da8d6ec0b03cc93d6a4cba256
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update devicetree setting per the schematic.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I8746d44daa43c06723bdfcac6803eb90a3c124b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 7203aa5c2dcb90e50356305cabbe062bd4f4dc76.
BUG=b:260138434
TEST=None
Cq-Depend: chrome-internal:5126951, chromium:4049177
Change-Id: Ieaa44a33a7c65d384581b5145821b449783ca3fa
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For nissa, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
BUG=b:234776154
TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Cq-Depend: chrome-internal:5102230
Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:253387689
Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
field STORAGE 30 31
option STORAGE_UNKNOWN 0
option STORAGE_NVME 1
option STORAGE_UFS 2
end
BUG=b:254365935
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:235919755
Test=Check error message "Exposing GPIOs in Power Resource and _CRS"
not show in firmware log.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I21a47adde48555098d041b94d483cad308bdb717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that
ACPI PM timer remains disabled.
The PM timer (by PMC IP) consumes more power and blocks S0ix so the
timer is emulated by ucode to save power and unblock S0ix.
TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc
BIT 1 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:231291430
TEST=See STB Spill-to-DRAM enabled
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib60b7fc2ba85c7a8025c9f8c6495e94049499f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69707
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement mainboard_needs_pcie_init() for herobrine in order to
determine if we need to initialize the pcie links. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with
NVMe will fail to boot.
BUG=b:254281839
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Modify the chromeos FMD file for nissa variants to redistribute the
buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS
region.
1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME
is 3708K.
2. Modify SI_BIOS region to 12672K. This results in an addition of 32K
buffer each to FW_MAIN_A/B regions.
BUG=b:228936671
BRANCH=firmware-nissa-15217.B
TEST=Verify CSE FW update with new FMD and ME RW blobs on craask.
Cq-Depend: chrome-internal:5094491
Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
BUG=b:256754175
TEST=Build test image and use PTAT to check IA and GT value
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
