summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2019-01-15mb/google/atlas: Enable camera module NVMChen, JasonX Z
Enable at24 EEPROM by adding ASL of nvm BUG=b:122583978 BRANCH=master TEST=Build and run for basic camera functions Change-Id: Ifc2060c2ceb7d1a8ef490f36f484deb425a37c95 Signed-off-by: Chen, JasonX Z <jasonx.z.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/30795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-15mb/*/*: Use libgfxinit on sandy and ivy bridge boardsArthur Heymans
Change-Id: I41ad1ce06d9afcc99941affa232fa76ffa6631fb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-14Revert "mb/google/kalista: Disable EC-EFS"Patrick Georgi
This reverts commit 4e3cd744492c7a3d80bca55a35276efeada731e5. Reason for revert: Daisuke says "We'll keep EFS on Kalista/Karma enabled" Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2f11ffc9dd7eb05a2560261bbf472e8488c274d9 Reviewed-on: https://review.coreboot.org/c/30857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
Invert the default instead of selecting it everywhere. Restores the ability to use its Kconfig prompt. Beside Qemu targets, the only platforms that didn't select it seem to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The latter two were about to be patched anyway. Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30891 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
This patch revises the pad reset config of speaker reset GPIO pin from RSMRST to PLTRST. Audio engineer suggested to reset the amps with warm reset. BUG=b:122441567 BRANCH=None TEST=warm & cold reset & suspend_stress_test -c 10 and ensure the speakers are working well. Change-Id: I87c554b186b068da93e1662a97afaf01dddae0ef Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
PLT_RST_L was asserted twice at boot-up and a glitch was observed when coming out of suspend mode. Configure PLT_RST_L pad IOSSTATE from HIZCRx1 to be masked. BRANCH=octopus BUG=b:117302959 TEST=Verified no glitch on PLT_RST_L at S3 and PLT_RST_L stays high 3.3v during S0ix. Change-Id: I8c23aadda72be54fb45e67aab2bc8ed51e473bae Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30815 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:115699781 TEST=Verified usb operation successfully. Change-Id: I41fecaa43f4b1588a0e4bbfc465d595feb54dd24 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30817 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
butterfly is a Sandybridge device, and selecting Ivybridge breaks libgfxinit currently due to CPU mismatch Test: build/boot butterfly w/libgfxinit Change-Id: I1a7f5a3681d21a256834b11b545855c4365f5f78 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30820 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on butterfly using libgfxinit. Test: boot/build butterfly, verify internal display functional prior to OS driver loading. Change-Id: Ib8060f2d1ad0694f0886d35c83763907f61b47b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30819 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
Add placeholder for future flapjack additions/modifications. BUG=None BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Ib9cd39e284f19b9179da73ed9f2b13d97442960e Reviewed-on: https://review.coreboot.org/c/30859 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
Enable the EC_AP_INT_ODL interrupt on GPIO_134 for all octopus boards that support it. Also removing unnecessary IO standby support since we don't use this pin to wake up the SoC. BRANCH=octopus BUG=b:122552125,b:120679547 TEST=CTS tests with changes Change-Id: I018864ae5fa400372b5b443e49828e8202b9aa4d Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30788 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
1) Add a Platform Data Region called SI_PDR which is allocated in the flash descriptor for this platform 2) Add a DIAG_NVRAM region for use by the diagnostic payload for non-volatile storage. 3) Encapsulate both RW_LEGACY and DIAG_NVRAM in a region called RW_DIAG so it is clear they are associated. 4) Move the RW_DIAG region to the start of the RW region so that once we can re-enable a larger BIOS region this sub-region will be in the uncached area since it is not accessed on a normal boot. BUG=b:119435206 TEST=tested on Arcada board to ensure expected regions are present Change-Id: Ieb8bc4cf70d0a931e4944210112cfaf5c543f9f3 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
Sdram config sdram-lpddr3-hynix-4GB.inc for H9CCNNNBKTMLBR-NTD can't boot on Mickey. It's confirmed that the right config for Hynix H9CCNNNBKTMLBR-NTD is sdram-lpddr3-hynix-2GB-BK.inc. BUG=b:122239609 BRANCH=master TEST=boot on mickey Change-Id: Ifeaadda50d939e0c118cb7fe3964dcd08b709c2a Signed-off-by: Loop_Wu <Loop_Wu@asus.com> Reviewed-on: https://review.coreboot.org/c/30761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
Explicitly configure the minimum assertion width values to ensure that they are set as expected and are not using unknown defaults. Change-Id: I9a88e5b6002137df6e572b84d0de8a69522938f9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
Enable the active-low recovery mode GPIO now that new boards are available which have an external pull-up instead of a pull-down so it can be asserted properly by servo. This was tested on a Sarien system by holding the recovery button on the servo board and tapping the cold reset button and ensuring that it enters recovery mode. Change-Id: I3216580bc94de71b05bf9382f15d0c4d428cb9fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Change-Id: I6fe2b201a6a6f6307a0c4bd6a61f56cfcdd88bf4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. BUG=b:119899987 TEST=build and flash to rammus, log into rammus and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Signed-off-by: marxwang <marx.wang@intel.com> Change-Id: Ieadb3609c7634a20e96c7c4dfb96f5e3f23e468b Reviewed-on: https://review.coreboot.org/c/30607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
Elan touchpad require connected i2c clock to be running at 400Khz, with the modification can get 404Khz speed from Arcada EVT platform. BUG=b:119628524 TEST=Build and boot up on Arcada platform, measure the i2c clock is around 400Khz. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If717cdd6b73394125df54d90f729ffb4ef37b087 Reviewed-on: https://review.coreboot.org/c/30653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
Modify ELAN touchpad bus i2c clk from 466Khz to 400Khz. BUG=b:119628524 BRANCH=master TEST=measure ELAN Touchpad CLK Change-Id: Ia8433c6ef320cea9a0145db4ba440d67ccd0f41e Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30588 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
The vbt was extracted from the option rom found on stock images. The vbt.bin is the same across all variants. The VBT has a modified BDB block 43, the 'Backlight info block' such that the inverter type for the panel in use is set to 2 (BDB_BACKLIGHT_TYPE_PWM) instead of 0 (BDB_BACKLIGHT_TYPE_NONE). This only seems to matter on Windows, as without it changing the backlight duty cycle does not work. Change-Id: I82c72c561e1058e0b77d80baf330b64f7c6b08e3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30487 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
Without eist enabled, fizz's CPU clocks are locked at the base frequency, and don't scale up or down. This prevents fizz from idling properly and turbo boost from functioning, so enable it (as is done for all other KBL boards) Test: build/boot google/fizz, ensure CPU clocks scale as expected Change-Id: I77dd0e1df1bf88f5bae18e9f832ca8d60fb777b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
Change-Id: I99b9c0452ed0e6d580edb5a4f3317d776085b382 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
We have init_bootmode_straps() defined for the same purpose. Change-Id: Ia2692d8f8986247ea4ce889d6252d3c4c8b27bc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30398 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04mb/google/sarien: Add settings for noise mitgationLijian Zhao
Enable acoustic noise mitgation for sarien platform, the slow slew rates are fast time dived by 8. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I5d38a1e03af08f106e2422a319b34c3fb54bdf28 Reviewed-on: https://review.coreboot.org/c/30448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-03mb/google/poppy/variants/nami: Add sku_ids for PantheonFrank Wu
Sync'ing the sku_ids list in the master sku sheet for Pantheon. BUG=b:121207221 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ic03c3a6fe238f2692ce15c45016115087380c0ca Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
Add DRAM support for google kukui. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1ed01404343745c883b22a648966327bdcabc5c2 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-03src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER)Elyes HAOUAS
Use smm-$(CONFIG_HAVE_SMI_HANDLER) instead of smm-y Change-Id: I0f91bc3e6c8ab31d837ab89af62d700b35c1e01b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/google/{auron,jecht}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER is selected here: broadwell/Kconfig Change-Id: I50c664198a954f661416c8cb1ced05f8775d8e07 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER is already selected in soc/intel/skylake/Kconfig Use "smm-$(CONFIG_HAVE_SMI_HANDLER)" in Makefile.inc files. Change-Id: Ia60e34ee03958b05f2ac0c326632b6dd9f02a2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03mb/google/hatch: Make WP_RO range align with winbond specificationSubrata Banik
This patch ensures to make memory protected range between 01C00000h - 01FFFFFFh as per winbond spi datasheet https://www.winbond.com/resource-files/w25q256jv%20spi%20revb%2009202016.pdf section 7.1.15 BUG=none BRANCH=none TEST=build for hatch. Change-Id: I52d8dbba14bd060b48a7fe8ee009219413ef89ca Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30552 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-03mb/google/dragonegg: Make WP_RO range align with winbond specificationSubrata Banik
This patch ensures to make memory protected range between 01C00000h - 01FFFFFFh as per winbond spi datasheet https://www.winbond.com/resource-files/w25q256jv%20spi%20revb%2009202016.pdf section 7.1.15 BUG=none BRANCH=none TEST=build and boot dragonegg. Change-Id: Ife451233f60ef680088babbc824bfc5a17078cb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30551 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-02mb/google/octopus/variants: Add 20ms reset delay for WACOM deviceMarco Chen
Add reset delay in power resource to prevent from failing to bind after unbinding. And boards including yorp series - bobba / phaser and bip series - ampton are affected. BUG=b:121286833 BUG=b:117474421 BUG=b:121019320 BRANCH=None TEST=emerge-octopus coreboot, verified that WACOM touchscreen can re-bind successfully. Change-Id: Icf690fc8e9450d559b642d1c88e29ff5d52c5488 Signed-off-by: Marco Chen <marcochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/30422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
This patch enables CNVi wifi for hatch 1. Enable CNVi device in device tree 2. Configure GPIO pad config for CNVi BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I0c5542737d3a629b6a40116b4aa8ab6cbdd6a4dc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30436 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
Correcting order of display related GPIOs and also adding not connected pin definitions for display GPIOs BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I9498284d263516f65513d6395883b6b09dd70fd5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
This patch enables the x4 NVME device for hatch, * Enable the Root port 9. * Assign the usage type for clock source. * Configure the GPIO for CLK SRC 1. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: I69be6b21a5ae5962877a5c38180b5ffac532fed4 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30431 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
This patch adds the configurations for, * USB 2.0 ports. * USB 3.0 ports. * Enables USB xHCI controller. * GPIO config for USB2_OC2 and USB2_OC3. * Add the ACPI objects to configure USB ports. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Ia7b25c25b8208c678aeae3a32033611b69b54062 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30457 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
This patch enables the SATA for hatch, * Enable the SATA port 1. * Configure the GPIO for SATA. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Iaf800d1531688c3d3b82600038ea1d7160ae4b0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30435 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
Change-Id: I7fdf8934187d2786fdac23ed4460147867c25044 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-29mb/google/octopus: Override emmc DLL values for FleexBora Guvendik
New emmc DLL values for Fleex. BUG=b:120561055 TEST=Boot to OS, chromeos-install, mmc_test Change-Id: Id0022e9d0f0a7802113bbf193decff3c8aaa04f8 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30226 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-29mb/google/sarien: Adjust GPD3 pin terminationLijian Zhao
Internal pull up need to be enabled for GPD3 as power button pin for PCH according cannonlake pch EDS vol1 table 17-1. Without that pin will stay floating and hook up XDP can cause system shutdown as power buttone event will trigger. BUG=N/A TEST=Hook up XDP on sarien platform, able to boot up into OS and stay at power up state. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ibe21da5f4a0797a3d62b36899f023908b46c25bf Reviewed-on: https://review.coreboot.org/c/30374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-29mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBusRizwan Qureshi
* Enable host bridge. * Enable CSME. * Enable Power Management Controller. * Enable Primary to Side Band Bridge Controller. * Enable SmBus Controller. BUG=b:120914069 BRANCH=None TEST=code compiles with the changes Change-Id: I2fbf0ece845a7114ce5ab7f6482a935d9275deee Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-28mb/google/poppy/variant/nami: add the vbt setting for bard skuRen Kuo
Modify the vbios's eDP signal setting from level0(0dB) to level1 (3.5dB) for bard Add VBT blobs and include it in cbfs BUG=b:119448457 TEST=Test & measure eDP signal Change-Id: I0b854a6adad43844282aed61d26e798727b5cb62 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30375 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28mb/google/octopus: Override emmc DLL values for PhaserBora Guvendik
New emmc DLL values for Phaser. BUG=b:120561055 TEST=Boot to OS, chromeos-install, mmc_test Change-Id: Ie8d56e0faf5c96d980c0614a61fbc6eacf582943 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30144 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28mainboard/google/poppy/variants/rammus: Fixed touchscreen function failedKane Chenffd
According to issue tracker b:119238959 #4 & #6. Hardware modify design to make GPP_E3 to be a switch of touchscreen I2C CLK and SDA. Control GPP_E3 to make touchscreen I2C CLK and SDA keep low during power on initialization to avoid data transfer during this time. After touchscreen IC initial complete, control GPP_E3 to high to make touchscreen I2C CLK and SDA work normally. Depending on touchscreen IC specification, device take 105ms for power on initialization. Change delay time from 120ms to 105ms. BUG=b:119238959 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, run S5 stress test and verify the result Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86452c1445243c499aeaf931dba286db169c5628 Reviewed-on: https://review.coreboot.org/c/30180 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28arch/x86: Drop spurious arch/stages.h includesKyösti Mälkki
Change-Id: I3b9217a7d9a6d98a9c5e8b69fe64c260b537bb64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28mb/google/hatch: Enable SPI controller for HatchRizwan Qureshi
Enable SPI controller(D31:F5). BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I4d3acd3f31650d5b39927f8e3cfbb6187541653f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28mb/google/hatch: Enable console UARTMaulik V Vaghela
This patch incorporates following changes to enable console on UART0 1. update default console number to 0 2. Enable PCI port for UART0 GPIO configuration will be done by coreboot based on correct console number. Change-Id: I735d33674b276b28e2cbb753d3a6d83edbabe89d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-28mb/google/hatch: Enable LPC/eSPI controllerAamir Bohra
Enable LPC/eSPI controller(D31:F0). EC would be using eSPI interface, since the strap GPP_C5 is pulled up. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ia4baf80a775ba8898055f82e80dc583e65c4ed0b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-27mb/google/hatch: Add SMI handlersAamir Bohra
Add SMI handlers for below SMI events: 1. eSPI SMI event. 2. ACPI enable/disable SMI event -> Add support for EC to configure SMI mask on ACPI disable. -> Add support for EC to configure SCI mask on ACPI enable. 3. Sleep(S3/S5) SMI event -> Add support for EC to configure wake mask for S3/S5 event Change-Id: I7127b44712cd89b3d583e9948698870ca0c64b2b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
Adding hot plug detect GPIO support for external Type-C display in event for cable connect/disconnect. Change-Id: If9d52dc0f9916f761c8fdd88c76968aaf663e650 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30365 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Modify hatch SPI flash layoutV Sowmya
This patch modifies the hatch flash layout to support IFWI 1.6 with the following regions, Flash Region 0: Descriptor [0x0 - 0xFFF] Flash Region 1: IFWI (consist of ME and PMC FW) [0x1000 - 0x3FFFFF] Flash Region 2: BIOS [0x1400000 - 0x1FFFFFF] Change-Id: I3d05fb50e970737a2552b85d6aebed943bf2b6cb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30413 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
Enable EC LPC interface and configure below LPC IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ie5d92df80d6b3a5913d0cbe78c1b8eefb5269d4a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
This implementation adds below code: 1. Add SOC ACPI code in dsdt.asl -> platform.asl -> globalnvs.asl -> cpu.asl -> northbridge.asl -> southbridge.asl -> sleepstate.asl 2. Add chromeos.asl in dsdt.asl 3. Add EC ACPI code in dsdt.asl -> superio.asl -> ec.asl 4. Remove config for WAK/PTS ACPI method as chromeec doesn't implement those. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Icf1b1d7e34a7e863139c3583903f3b1e2cdc8da6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
This implemetation adds EC SCI, SMI, S5/S3 wake trigger events. Also adds the EC specific ACPI configs to enable support for ALS, EC PD device and PS2 keyboard device. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I3a86f609c269cb59e546fc7ba4ba032e5ea8341a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30281 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
This reverts commit 969ed357f823659a6861a2ca38f3ad9d7b58f949 Reason for revert: According to partner issue b:112448519 comment#80, it impacts skin temperature specifications. Change-Id: I7603c3816f34adebc1f67eff6fad214557544022 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
This patch ensures following 2 features 1. Enable IGD controller in devicetree.cb 2. Pass required FSP UPD to perform internal graphics initialization Change-Id: I607199590d793a70e1e20bb3241fc34467aa829d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
This implementation adds below support: 1. Add support to read memory strap. 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config 3. Include SPD configuration BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc -bmplk" emerge-hatch coreboot Change-Id: I9bda08bd0b9f91ebb96b39291e15473492a6bf19 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30248 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc" emerge-hatch coreboot Change-Id: I91db5745d1db16ab4b2fbb7f8c415bd7c1eb29e9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
Incorporating some feedback to initial hatch mainboard checking (CL:30169) that came in after the CL merged. Updated the chromeos.fmd with the following, * SI_ALL = 3MB * SI_BIOS = 16MB BUG=b:20914069 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -v Change-Id: I4e311c68873f10f71314e44d3a714639a06dbee8 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30296 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22Revert "mb/google/octopus: Add custom SAR values for Bobba"Justin TerAvest
This reverts commit a914152fa6072c443ccd18de22412b47a228e754. Reason for revert: According to the partner on this project, custom values like this are no longer necessary. Change-Id: I393eb4997f58abe0f77161999474994f06741519 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/c/30347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-21mb/google/sarien: Disable pcie interface for wwanLijian Zhao
WWAN chip support 3 interfaces as pci express, USB 2.0 and USB 3.0, the usgae of Sarien choose to only use USB interface but not over pci express, so totally disable pci express root port 12. BUG=b:1246720 TEST=Boot up into OS with WWAN attached, cold boot and warm boot 10 cyles can still device can be listed under lsusb. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ic4da393c0c0d903848111e1c037c2730c86afa7d Reviewed-on: https://review.coreboot.org/c/30350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2018-12-21mb/google/poppy/variants/atlas: Remove duplicate entry of dptf_enableSumeet Pawnikar
Remove duplicate entry of dptf_enable. BRANCH=None BUG=None TEST=None Change-Id: I3ddd6a702180624d31c5c58c71acdce8f627c925 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A512M16TB-062EJ SPDFrank Wu
Add SPD file for micron_dimm_MT40A512M16TB-062EJ (ram id: 12) BUG=b:121217853 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I45e6a7a183556fb085f5442cd6bb429d79ef4235 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A256M16LY-075F SPDIvy Jian
Add SPD file for sdp micron_dimm_MT40A256M16LY-075F (ram id: 11) BUG=b:120884302 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Icf731bfefd550e9b94b6404bc870d4d76451deb1 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
Add code support to enable H1 TPM interfaced to SOC on GSPI0. The TPM interrupt is mapped to GPP_C21. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ib63a0b473f632d91745102ebd01993e8d65b9552 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30210 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
This implementation cleans up gpio configuration functions and limit definition to baseboard only for now, until variant specfic overides are needed. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I563f6b97812b32d6e3d99e3df512dc112da78aea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-20Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD"Jenny TC
This reverts commit 999b916015ea0558e3821bdb51501b43a60b5ed6. The DMIC doesn't have an ACPI id. The patch which enables ACPI device with id DMIC may create conflict in the feature. Also the ACPI id "DMIC" doesn't comply with ACPI naming conventions. The issue for which the patch was introduced, is already addressed in kernel DMIC driver and the patches are upstreamed in to the Linux kernel. Change-Id: I42cb076700dcb5906599471bebfcd5b265b17644 Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/c/30151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-12-19zoombini: remove support for deprecated zoombini boardBob Moragues
Change-Id: Iab2737940f07afb4f5a29ff50e6cb2a22027c51b Signed-off-by: Bob Moragues <moragues@chromium.org> Reviewed-on: https://review.coreboot.org/c/30094 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19mb/google/octopus: Override emmc DLL values for YorpBora Guvendik
New emmc DLL values for Yorp. BUG=b:120561055 BRANCH=octopus TEST=Boot to OS, chromeos-install, mmc_test Change-Id: I771c959a15959160224f056c0a16aa65bfbba94e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-19mb/google/sarien: Enable DMI/SATA power OptimizeLijian Zhao
Turn on power optimizer of PCH side DMI and SATA controller. BUG=N/A TEST=Build and boot up into sarien platoform, able to finish 100 cycles of s0ix. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I41da2b4106d683945cdc296e2a77311176144f43 Reviewed-on: https://review.coreboot.org/c/30212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19mb/google/kahlee: Remove board_id check for Liara 2T timingsMartin Roth
Use 2T memory timings on Liara for all board IDs. BUG=b:116082728 TEST=Build & boot on Liara Change-Id: I5814e63db35cf7761f4f20792b0f3cf4120a1b60 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/30285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-12-19mb/google/variant/nocturne: set CONFIG_NO_FADT_8042Nick Vaccaro
Set CONFIG_NO_FADT_8042 to avoid probing for the 8042 controller. This speeds up boot on nocturne by 1.3 seconds: Before change: [2.162266] EXT4-fs (mmcblk0p3): mounting ext2 file system using the ext4 subsystem After change: [0.867735] EXT4-fs (mmcblk0p3): mounting ext2 file system using the ext4 subsystem BUG=b:120960844 BRANCH=none TEST=build, flash, and boot nocturne; check dmesg to verify that boot is faster and that you don't see the following log in dmesg: [0.671501] i8042: Probing ports directly. Change-Id: I62a16e6de5e74fa17970d9967f6d1628497ec1d3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/30283 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19google/rambi: disable TXE in devicetree for all variantsMatt DeVillier
The TXE PCI device serves no function under Linux, and doesn't work properly under Windows, so disable/hide it from the OS. Test: Boot Windows 10 on google/squawks, verify TXE not visible under Device Manager. Change-Id: Idaa152e15106b826fd5aa787090acd45719f4228 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-19google/cyan: set touchscreen GPIO to non_maskableMatt DeVillier
Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...] in additon to changing the touchpad/touchscreen interrupts from edge to level triggered, also marked them as maskable. This not only broke the touchpad functionality, but caused issues with the touchpad as well. Revert the touchpad to being non_maskable for all cyan variants with a touchscreen. Test: boot GalliumOS on google/cyan with a range of kernel versions (4.15.18, 4.16.13, 4.17.x, 4.18.x) and verify touchscreen functional, touchpad working properly (not jittery) Change-Id: I0e0357912f9404af7d0f4e7938a1a94c74810b37 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-19mb/google/sarien: Use meaningful SATA modeLijian Zhao
Define SATA mode to AHCI mode instead of 0, make devicetree more readable. BUG=N/A Change-Id: I903545d9487c1409f9008407fe5bee6aa4959b98 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19mb/google/sarien: Enable ELAN Touchpad and Disable ALPS TouchpadChris Zhou
Enable ELAN Touchpad and Disable ALPS Touchpad BUG=b:119628524 BRANCH=master TEST=ELAN Touchpad can work normally. Change-Id: I7839459a70768fa95ba4871b1915d2ea86419bbb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: I4ee3cc42302c44dc80ae1f285579a4d1775aec16 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-12-19mb/google/octopus/var/ampton: Tune I2C AudioJustin TerAvest
The previous settings caused the I2C frequency for the audio bus to be too high, at 417kHz. The settings in this commit correct the frequency to 396kHz. BUG=b:119423345 Change-Id: Ibed886e6e1b0df4df6b87f6291e515364b3bf718 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/c/30129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-18Revert "google/sarien: Increase BIOS region to 28MB"Lijian Zhao
This reverts commit ad41f5512306d118047d2f7243678ddb32b4b06b. Reason for revert: <Issue have seen on EVT platform that vboot always fail to verify keyblock A> BUG=b:121169122 Change-Id: I2790ef3463a228008b614498009fbdc8b493cfb0 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-18mb/google/sarien/variants/arcada: Enable touchpad and touchscreenCasper Chang
Enable Elan touchpad and WACOM touchscreen BUG=b:119924134, b:120103010 BRANCH=master TEST=Verify touchpad and touchscreen on arcada work with this change. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I3dcdb4eeeb32766e64553d9e69e6b7e2b5ba85aa Reviewed-on: https://review.coreboot.org/c/30146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
Commit d80884ea5a ("mb/google/kahlee: Disable IOMMU") disabled the IOMMU in all kahlee variants, but omitted the explaining comment only in liara's devicetree.cb. Copy this comment to liara. Change-Id: I564013a16217445003467e2a0579abd50597b205 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
Using ${...} in some places is slightly confusing. Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree") Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18mb/google/poppy/variants/nami: Add sku_ids for SyndraAmanda Huang
Sync'ing the sku_ids list in the master sku sheet. BUG=b:112876867 Change-Id: I658e8dc67679b5b528ab267861a1151f50e42414 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
Update dptf settings for Charger throttling. Also, update Power Limit1 minimum value setting from 4.5W to 3W. BUG=b:112448519 BRANCH=octopus TEST=Built and tested on Fleex system Change-Id: I8c2a796ff28254ebef28ed5745b344f925d6e649 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
Bobba would prefer to use different SAR values per sku-id for regulatory compliance. This commit uses the newly added interface for custom wifi SAR CBFS filenames. CQ-DEPEND=CL:*729429 BUG=b:120958726 BRANCH=octopus TEST=build Signed-off-by: Justin TerAvest <teravest@chromium.org> Change-Id: I354382d651d65d533459f0ca460ca6fd6de547fd Reviewed-on: https://review.coreboot.org/c/30223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-17mb/google/poppy/variants/nami: perform PL2 setting for bard/ekkoRen Kuo
According to bard/ekko cpu types, PL2 need to set the values 1. KBL_U PL2 is 25w. 2. KBL_R PL2 is 29w. BUG=b:120874861 TEST=power on and check the DUT can boot up well Change-Id: I5f9d672c4244c363a7cfb362653663a065259fc0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-15mb/{intel,google}/{icelake_rvp,dragonegg}: make use of cpu_get_cpuid() ↵Subrata Banik
helper function This patch replaces cpuid(1) references from icelake mainboard with x86 cpu common code library functions cpu_get_cpuid(). - cpu_get_cpuid() -> to get processor id (from cpuid.eax) Change-Id: Ia12d95d911dd6ee60a3a35937264fef668ad9e35 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-12-14cheza: Add board reset via Chrome ECJulius Werner
This patch implements board reset on the Cheza board. The real board reset used by the operating system uses the PMIC, but unfortunately the PMIC needs to be configured right for that to work. The PMIC configuration currently happens in the Qualcomm blob (QcLib) that is run from romstage, but vboot needs to be able to reboot during verstage already. Porting all the PMIC initialization code to run in the bootblock seems excessive (and at odds with the goal of doing as little as possible before verification), so we'll just do a little hack and ask the EC to perform a cold reset instead. For vboot purposes, this should work just as well. BUG=b:118501305 TEST=Hacked vboot code to call vboot_reboot(), confirmed that board reset and came back up as expected. Change-Id: I3858d95f481884a87c243d4fa3d6369c1e8a5a2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/29849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 10:49:32 +0000