summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-04-18mb/google/poppy/variants: Set VmxEnable to 1Furquan Shaikh
2018-04-17mainboard/google/kahlee: Add EC back into grunt devicetreeMartin Roth
2018-04-17mainboard/google/kahlee: Update EC pins from GPIOs to GPEsMartin Roth
2018-04-17mb/google/poppy/variants/nami: Update GPIOsShelley Chen
2018-04-17mb/google/octopus: Enable Yorp EC software syncJustin TerAvest
2018-04-17cbfs: Add cbfs_boot_load_file()T Michael Turney
2018-04-17mb/google/poppy/variants/nami: Enable DPTF and configure DPTF parametersFrank Wu
2018-04-16mb/google/octopus: Add Write Protect GPIO to cros_gpiosHannah Williams
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
2018-04-16google/kahlee: Resume on AC insertionMarshall Dawson
2018-04-16mb/google/kahlee: Select BT I2S PAD on ACP_BT_UART muxAkshu Agrawal
2018-04-16Revert "mb/google/reef/sand: Override USB2 phy settings"Katherine Hsieh
2018-04-13src/mainboard/kahlee: Turn on keyboard backlight on gruntMartin Roth
2018-04-13Revert "mb/google/reef: Override USB2 phy settings"Tim Chen
2018-04-13mb/google/kahlee: Fix IRQ routingRichard Spiegel
2018-04-13Revert "mb/google/coral: add usb2 phy setting override for some variants"Tim Chen
2018-04-12mb/google/octopus: Configure SMI for ESPIShaunak Saha
2018-04-11mb/google/octopus: enable MRC recovery cacheAaron Durbin
2018-04-11mb/google/octopus: Select DRIVERS_SPI_ACPIFurquan Shaikh
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
2018-04-11mainboard/google/kahlee: Enable Keyboard backlight for GruntMartin Roth
2018-04-10mb/google/octopus: Capitalize MB part nameJustin TerAvest
2018-04-10mainboard: Make OemCustomize.c available at romstageRichard Spiegel
2018-04-10mb/google/poppy/atlas: Fix SPD index in commentJonathan Neuschäfer
2018-04-10mb/google/poppy: Disable rear camera for all vayne skuAmanda Huang
2018-04-09mb/google/octopus: Enable EC wakeShaunak Saha
2018-04-09mb/google/octopus/variants/baseboard: Add DPTF parametersSumeet Pawnikar
2018-04-06mb/google/octopus: Edge trigger cr50 interruptJustin TerAvest
2018-04-06mb/google/octopus/variants/baseboard: Enable DPTF supportSumeet Pawnikar
2018-04-05mb/google/poppy/variants/nami: Add SPD file for Vaynechriszhou
2018-04-05mainboard/google/kahlee: Update WP to active lowMartin Roth
2018-04-04mb/google/octopus/variants/baseboard: Set PL1 and PL2 valueSumeet Pawnikar
2018-04-03mainboard/google/zoombini: Enable HAVE_ACPI_RESUMEVaibhav Shankar
2018-04-02mb/google/octopus: Fix Trackpad interrupt GPIO configHannah Williams
2018-04-02mb/google/octopus: Make PMC I2C pads IOSTANDBY_IGNOREHannah Williams
2018-04-01mb/google/octopus: update SSP port and DMIC 4CH nhlt supportM Naveen
2018-03-30mb/google/octopus: Enable i2c4 which is the root port for audio codecShamile Khan
2018-03-30mb/google/poppy: Add variant for AtlasDuncan Laurie
2018-03-29mb/google/octopus: Fix wifi configurationFurquan Shaikh
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
2018-03-28sb/intel/common: Add common code for SMM setup and smihandlerArthur Heymans
2018-03-28mainboard/google/meowth: Disable debug consent and enable S0ixVaibhav Shankar
2018-03-28mb/google/poppy/variants/nami: Add SPD file for sona.Van Chen
2018-03-27mainboard/google/poppy: Add SPD for Hynix H9CCNNNCLGALAR-NUDDuncan Laurie
2018-03-27mb/google/octopus: Remove emmc tuning parameters from devicetreeFurquan Shaikh
2018-03-26mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF methodSeunghwan Kim
2018-03-26mainboard/google/cheza: Add support for ChezaT Michael Turney
2018-03-26mb/octopus: Set PNP config to PNP_PERF_POWERShaunak Saha
2018-03-24mb/google/octopus: Select TPM options only if mocktpm is not selectedFurquan Shaikh
2018-03-23mb/google/zoombini: always report EC is in RO modeNick Vaccaro
2018-03-22mb/google/zoombini: Enable NVMeNick Vaccaro
2018-03-22mb/google/octopus: Add CLKREQ and de-emphasis settings for PCIe Wi-FIShamile Khan
2018-03-21mb/google/fizz: Enable I2C bus 2Zhongze Hu
2018-03-21mb/google/octopus: Re-size flash WP_RO segmentSrinidhi N Kaushik
2018-03-21mb/google/octopus: Create bip variantJustin TerAvest
2018-03-21mainboard/google/kahlee: Update GPIOs based on board IDMartin Roth
2018-03-21mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_tZhuohao Lee
2018-03-21mb/google/octopus: Enable TPM on GSPIRavi Sarawadi
2018-03-21mb/google/poppy/variant/nautilus: Enable CABC feature as defaultSeunghwan Kim
2018-03-21mb/google/kahlee: Add register address mapping for FCH MISCAkshu Agrawal
2018-03-20mainboard/google/kahlee: Initialize EC earlier in the bootblockMartin Roth
2018-03-19mb/google/octopus: Configure PERST_0 pinJustin TerAvest
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
2018-03-19mb/google/fizz: Enable VMXShelley Chen
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
2018-03-16mb/google/eve: Update DPTF parametersDuncan Laurie
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
2018-03-14mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggeredVincent Palatin
2018-03-14mainboard/google/meowth: Enable System Agent dynamic frequencyLijian Zhao
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
2018-03-12mb/google/zoombini/variants/meowth: change gpios to no-connectsNick Vaccaro
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
2018-03-10meowth: Add SAR Sensor in devicetreeGwendal Grignou
2018-03-09mb/google/zoombini: re-enable software syncCaveh Jalali
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
2018-03-09mainboard/google/kahlee: Set GPIO 40 to inputMartin Roth
2018-03-09mainboard/google/kahlee: Disable Bayhub part on board_id 0Martin Roth
2018-03-08mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDsShelley Chen
2018-03-08mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1Daniel Kurtz
2018-03-08mb/google/poppy : Get SKU_ID from EC for Nami/Vayneamanda_hwang
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
2018-03-08mb/google/octopus: Add gpio configs for communitiesShaunak Saha
2018-03-08mb/google/octopus: Add device tree settingsShamile Khan
2018-03-08mb/google/nautilus: Correct LINK FREQ of imx258 sensorAlan Chiang
2018-03-08mb/google/kahlee: Add SKU supportSimon Glass
2018-03-08mb/google/poppy/variants/nami: Add WACOM EMR supportjasper lee
2018-03-07mb/google/poppy/variants/nami: Add SPD files for namijasper lee
2018-03-07mb/google/zoombini/variants/meowth: enable SAR powerNick Vaccaro
2018-03-07mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wakeSeunghwan Kim