summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2019-05-06mb/google: Remove unused 'include <smbios.h>'Elyes HAOUAS
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
2019-05-03mainboard/google/cyan/acpi: Serialize _CRS methodFrans Hendriks
2019-05-03sdm845: Add QCLib to RomStage to perform IP initT Michael Turney
2019-05-03soc/intel/braswell: add default option to use public FSPMatt DeVillier
2019-05-03mb/google/arcada: Add settings for noise mitgationNathan_chen
2019-05-03mb/google/poppy/variant/atlas: enable USB acpiGaggery Tsai
2019-05-02sdm845: Add USB support on cheza platformChandana Kishori Chiluveru
2019-05-01mb/google/sarien: Disable S5 wake on LAN by defaultEric Lai
2019-05-01google/cyan,intel/strago: increase default CBFS sizeMatt DeVillier
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
2019-04-29mb/google/sarien: Update GBB flagsDuncan Laurie
2019-04-29arcada: add internal pull to ISH UART RXJett Rink
2019-04-29mb/google/sarien: Add psys_pmax setting to 136WGaggery Tsai
2019-04-29soc/intel/braswell: Move LPE ACPI code to mainboardFrans Hendriks
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
2019-04-26mb/google/sarien: Enable LTR for PCIe NVMe root portDuncan Laurie
2019-04-26Revert "mb/google/arcada: Add settings for noise mitgation"Duncan Laurie
2019-04-26mb/google/poppy/variants/atlas: Revise AC/DC loadlineGaggery Tsai
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
2019-04-24mb/google/hatch/var/kohaku: Skip UART0 config in FSPFurquan Shaikh
2019-04-24mb/google/arcada: Add settings for noise mitgationNathan_chen
2019-04-24mb/google/sarien: Disable POWER_OFF_ON_CR50_UPDATEKeith Short
2019-04-24mb/google/sarien: Add power control for Sarien touchscreenEric Lai
2019-04-24mb/google/sarien: Remove touch VPD support and Melfas HID touchEric Lai
2019-04-24mb/google/sarien: Disable touch by strap pin GPP_B4Eric Lai
2019-04-24mb/google/sarien: Toggle SSD reset pin on DVT2Lijian Zhao
2019-04-24mb/google/octopus: I2C clock tuning for bloogTony Huang
2019-04-23mb/google/octopus/variants/bloog: Add goodix touchscreen supportTony Huang
2019-04-23mb/google/sarein: Add power control for Arcada touchscreenRoy Mingi Park
2019-04-23nb/intel/sandybridge: Drop pch.h from sandybridge.hPatrick Rudolph
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
2019-04-23mb/google/octopus: Add keyboard backlight support for Droid/BlorbSheng-Liang Pan
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
2019-04-22mb/google/sarien: Configure both GPP_H12 and GPP_H13 for SSD on ArcadaRoy Mingi Park
2019-04-21nb/intel/haswell: Add an option for where verstage startsArthur Heymans
2019-04-20mb/google/octopus/variants/baseboard: Disable unused I2C 1Tony Huang
2019-04-20mb/google/arcada: Set psys_pmax to 140WNathan_chen
2019-04-19src/mb/Kconfig: Fix PCI subsystem IDsElyes HAOUAS
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
2019-04-19mb/google/sarien: Update SMBIOS type17Lijian Zhao
2019-04-19mb/google/sarien: Update GPIO GPP_C23 settingLijian Zhao
2019-04-18mb/google/sarien: Enable board_id featureDuncan Laurie
2019-04-18mb/google/octopus: Set default configuration to low for gpio_178Wisley Chen
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
2019-04-16soc/intel/cannonlake: Configure Vmx support using KconfigRonak Kanabar
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
2019-04-15mb/google/octopus: Add custom SAR values for Laserpeichao.wang
2019-04-13mb/google/hatch: Restore Goodix Touch ScreenEric Lai
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
2019-04-12mb/google/hatch: Skip UART0 config in FSPFurquan Shaikh
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
2019-04-11mb/google/sarien: Reserve gpio pins for D3 cold controlEric Lai
2019-04-11mb/google/sarien: Change GPIOs to avoid leakage during S0iXRoy Mingi Park
2019-04-11mb/google/ampton: Fix polarity of EN_PP3300_WLAN_L signal.Tim Wawrzynczak
2019-04-11chromeos: clean up "recovery" and "write protect" GPIOsJoel Kitching
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
2019-04-11mb/google/octopus: Disable WLAN prior the entry of S5Kane Chen
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
2019-04-09mb/google/hatch: Support 16MiB fmapPhilip Chen
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
2019-04-08mb/mainboard/google/sarien/variants: Set correct tcc_offset valueSumeet Pawnikar
2019-04-08mb/google/sarien: Add support for melfas touch panelEric Lai
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
2019-04-04mb/google/fizz/variants/karma: Clear GPP_B4 when entering S5David Wu
2019-04-04mb/google/hatch: Add Kohaku boardShelley Chen
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
2019-04-04vboot: remove Kconfig option VBOOT_PHYSICAL_REC_SWITCHJoel Kitching
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
2019-04-03mb/google/sarien/variants/sarien: Update thermal configuration for DPTFJohn Su
2019-04-02mb/google/poppy/variants/nami: update sku_ids for PantheonFrank Wu
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
2019-04-01assert: Make dead_code() work at link-time instead of compile-timeJulius Werner
2019-04-01mb/google/sarien: Enable Bluetooth RF killLijian Zhao
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
2019-03-29mb/google/arcada: Make bluetooth reset_gpio active lowMike Hsieh
2019-03-29mb/google/arcada: Make touchscreen IRQ level triggeredMike Hsieh
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
2019-03-28mb/google/sarien: Call EC romstage init functionDuncan Laurie
2019-03-28Mistral: Enable USB in romstageNitheesh Sekar
2019-03-28chromeos: remove remaining dev switch referencesJoel Kitching
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
2019-03-28google/oak: Delete rowanEvan Green
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
2019-03-27mb/google/poppy/variants/rammus: Support new onboard Micron memoryKane Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 01:20:15 +0000