summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2020-07-29mb/google/volteer: Update TCSS D3Hot and D3Cold configurationJohn Zhao
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
2020-07-29mb/google/zork: update stapm parameter for berknipKevin Chiu
2020-07-29mb/google/dedede/var/magalor: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
2020-07-28mb/google/zork: Add Bluetooth reset gpios to devicetreeRob Barnes
2020-07-28mb/google/dedede/var/madoo: Generate SPD ID for supported partsDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A)Dtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure USB port setting for MadooDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure GPIO for MadooDtrain Hsu
2020-07-28mb/google/volteer/var/voxel: Add memory configurationSheng-Liang Pan
2020-07-28mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz Johnny Li
2020-07-28mb/google/volteer2: Add support for passive USB-C daughterboardCaveh Jalali
2020-07-28mb/google/dedede/var/waddledee: Add discrete WiFi configurationKarthikeyan Ramasubramanian
2020-07-28mb/google/volteer: sync'ing todor with terradorYH Lin
2020-07-28mb/google/volteer: Create todor variantYH Lin
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
2020-07-28lynxpoint: Factor out PIRQ routing from devicetreeAngel Pons
2020-07-28volteer: Create eldrid variantMiceLin
2020-07-27mb/google/hatch: Add smart battery I2C passthrough for DratiniTim Wawrzynczak
2020-07-27mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/escheKevin Chiu
2020-07-27mb/google/volteer: Add gpio-keys ACPI node for PENHAlex Levin
2020-07-27mb/google/volteer: Modify Delbin variantKane Chen
2020-07-27mb/google/dedede: Remove Rcomp resistor and target valuesMeera Ravindranath
2020-07-27dedede: Create magolor variantRen Kuo
2020-07-26mb/*/*/devicetree.cb: Normalize disabled PIRQ valuesAngel Pons
2020-07-26mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpadDavid Wu
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
2020-07-26mb/mainboard/dedede: update GPIO table for Botenyan.liu
2020-07-26mb/google/dedede: Change HDMI DDC GPIOs to native functionMaulik V Vaghela
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
2020-07-26src: Remove unneeded space in license headerElyes HAOUAS
2020-07-26mb/google/dedede/var/drawcia: Add G2Touch touchscreen supportWisley Chen
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
2020-07-26*/mb/google/volteer/**/gpio.h: Fix up license headerAngel Pons
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
2020-07-25soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKUSumeet R Pawnikar
2020-07-24mb/google/volteer: Remove unused dptf.asl filesTim Wawrzynczak
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
2020-07-23zork: Create dirinboz variantKevin Chiu
2020-07-23mb/google/arcada: Enable bayhub 720 on ArcadaMark Hsieh
2020-07-23mb/google/sarien: Enable bayhub 720 on SarienIvy Jian
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
2020-07-23mb/google/dedede/var/drawcia: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
2020-07-23mb/google/zork: Remove unnecessary PULL_UP from early_gpio_tableFurquan Shaikh
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
2020-07-23vc/amd/fsp/picasso: add logical to lane number in port descriptor structFelix Held
2020-07-23mb/google/kukui: Add new configs 'esche' and 'burnet'Kevin Chiu
2020-07-23mb/google/dedede: Enable the CSE Lite SKU for dededeV Sowmya
2020-07-23mb/google/dedede: Skip the CPU replacement check for dededeV Sowmya
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
2020-07-22mb/google/kukui: revise config structure for Jacuzzi followersHung-Te Lin
2020-07-21mb/google/dedede: Create madoo variantIan Feng
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
2020-07-20google/trogdor: Remove write_protect_stateEric Lai
2020-07-20sb/intel: Define CONFIG_FIXED_SMBUS_IO_BASEAngel Pons
2020-07-20mb/google/dedede: Update link frequency and end point structure for OV9734Pandya, Varshit B
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
2020-07-20mb/google/puff: update USB3 gen2 parametersTim Chen
2020-07-18mb/google/dedede: Convert static DPTF ASL into devicetree entriesTim Wawrzynczak
2020-07-18mb/google/volteer: Update DPTF with temp sensor 3Tim Wawrzynczak
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
2020-07-17mb/google/zork: Switch to using newly added i2s_machine_dev driverFurquan Shaikh
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
2020-07-17mb/google/zork: Enable ACP_PME_EN and ACP_I2S_WAKE_ENFurquan Shaikh
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
2020-07-16mb/google/zork: Move variant_pcie_gpio_configure() to bootblockFurquan Shaikh
2020-07-16mb/google/zork: Drop variant_romstage_gpio_table()Furquan Shaikh
2020-07-16mb/google/zork: Drop redundant romstage GPIO tableFurquan Shaikh
2020-07-16mb/google/zork: Drop power and reset control in romstage for dalbozFurquan Shaikh
2020-07-16mb/google/zork: Drop power and reset control in romstage for trembyleFurquan Shaikh
2020-07-16mb/google/zork: Keep USI_RST asserted in ramstageFurquan Shaikh
2020-07-16mb/google/zork: Keep pen power enabled in sleep stateFurquan Shaikh
2020-07-16mb/google/kukui: Add new config 'willow'Sheng-Liang Pan
2020-07-16google/trogdor: Remove GPIO_AP_SUSPEND_LJulius Werner
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
2020-07-15mb/google/dedede: Enable SIS touchscreen for WaddledeeKarthikeyan Ramasubramanian
2020-07-15mb/google/volteer: Enable SATA Port Dito ConfigShaunak Saha
2020-07-15mb/google/zork/.../sleep.asl: Remove unnecessary variableRaul E Rangel
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons