Age | Commit message (Expand) | Author |
2019-01-17 | mb/google/hatch: Configure miscellaneous features | Ronak Kanabar |
2019-01-17 | src/mainboard/google/sarien: query recovery mode from Cr50 | Keith Short |
2019-01-17 | hatch: Add sbmios_mainboard_sku function | Shelley Chen |
2019-01-17 | hatch: disable sw sync | Shelley Chen |
2019-01-16 | mb/google/sarien/variants/sarien: Set up tcc offset for sarien | John Su |
2019-01-16 | mainboard/google/kahlee: Also configure GPIO_9 in RAM stage | Daniel Kurtz |
2019-01-16 | mb/google/kahlee/careena: Add 20ms delay to capture | Akshu Agrawal |
2019-01-16 | mb/google/kahlee/liara: Add 20ms delay to capture | Akshu Agrawal |
2019-01-16 | nb/intel/sandybridge: Remove the C native graphic init | Arthur Heymans |
2019-01-16 | mb/google/sarien: Enable Camarillo Device | Lijian Zhao |
2019-01-16 | mb/google/sarien: Set PL1 and PL2 values | Sumeet Pawnikar |
2019-01-16 | buildsystem: Promote rules.h to default include | Kyösti Mälkki |
2019-01-16 | mb/google/sarien: Set Vref Config to 2 | Lijian Zhao |
2019-01-15 | mb/google/atlas: Enable camera module NVM | Chen, JasonX Z |
2019-01-15 | mb/*/*: Use libgfxinit on sandy and ivy bridge boards | Arthur Heymans |
2019-01-14 | Revert "mb/google/kalista: Disable EC-EFS" | Patrick Georgi |
2019-01-14 | console: Change BOOTBLOCK_CONSOLE default to `y` | Nico Huber |
2019-01-14 | /src/mb/google/poppy/variants/atlas: Revise SPK reset | Gaggery Tsai |
2019-01-14 | mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE masked | John Zhao |
2019-01-14 | mb/google/octopus/variants: Disable xHCI compliance mode | John Zhao |
2019-01-14 | mb/google/hatch: Use USB2 Port 10 for BT over CnVi | Aamir Bohra |
2019-01-13 | google/butterfly: correct northbridge selection | Matt DeVillier |
2019-01-13 | google/butterfly: add cpu/gpu pwm backlight register values | Matt DeVillier |
2019-01-13 | mb/google/kukui: add flapjack on top of kukui | YH Lin |
2019-01-11 | soc/mainboard: Update mainboard UART Kconfig | Lijian Zhao |
2019-01-10 | mainboard/google/octopus: configure EC_AP_INT_ODL | Jett Rink |
2019-01-10 | sb/intel/common: Show "Add EC firmware" only for boards that need it | Jan Tatje |
2019-01-10 | google/kukui: Correct boardid sources and add sku_id | Hung-Te Lin |
2019-01-10 | google/kukui: Complete board ID ADC values | Hung-Te Lin |
2019-01-10 | google/kukui: Correct boardid init values | Hung-Te Lin |
2019-01-10 | mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAP | Duncan Laurie |
2019-01-10 | mb/google/hatch: enable CPU cluster device | Aamir Bohra |
2019-01-09 | Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTD | Loop_Wu |
2019-01-09 | mb/google/hatch: Disable the SA IPU for hatch | V Sowmya |
2019-01-09 | google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flash | Tristan Shieh |
2019-01-08 | mb/google/sarien: Set minimum assertion width values | Duncan Laurie |
2019-01-08 | mb/google/sarien: Enable recovery mode GPIO | Duncan Laurie |
2019-01-08 | mb/google/sarien: Remove power button ACPI device | Duncan Laurie |
2019-01-07 | mb/google/hatch: Enable touch panel support | Maulik V Vaghela |
2019-01-07 | mb/google/poppy/variant/rammus: enable USB acpi | marxwang |
2019-01-07 | mb/google/sarien: Correct I2C bus clock for touchpad | Lijian Zhao |
2019-01-07 | mb/google/sarien: Modify ELAN Touchpad i2c bus clk | John Su |
2019-01-06 | mb/google/slippy: Add a VBT for all variants | Arthur Heymans |
2019-01-06 | mb/google/fizz: enable eist (enhanced speedstep) | Matt DeVillier |
2019-01-06 | device: Use pcidev_path_on_root() | Kyösti Mälkki |
2019-01-06 | device: Use pcidev_on_root() | Kyösti Mälkki |
2019-01-04 | mb/*/chromeos.c: Fix PRE_RAM and unify style | Kyösti Mälkki |
2019-01-04 | mb/google/jecht: Rename save_chromeos_gpios function | Kyösti Mälkki |
2019-01-04 | mb/google/sarien: Add settings for noise mitgation | Lijian Zhao |
2019-01-03 | mb/google/poppy/variants/nami: Add sku_ids for Pantheon | Frank Wu |
2019-01-03 | google/kukui: Initialize DRAM from romstage | Junzhi Zhao |
2019-01-03 | src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER) | Elyes HAOUAS |
2019-01-03 | mb/google/{auron,jecht}: Remove duplicated HAVE_SMI_HANDLER | Elyes HAOUAS |
2019-01-03 | mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLER | Elyes HAOUAS |
2019-01-03 | mb/google/hatch: Make WP_RO range align with winbond specification | Subrata Banik |
2019-01-03 | mb/google/dragonegg: Make WP_RO range align with winbond specification | Subrata Banik |
2019-01-02 | mb/google/octopus/variants: Add 20ms reset delay for WACOM device | Marco Chen |
2019-01-01 | mb/google/hatch: Enable CNVi Wifi for hatch | Maulik V Vaghela |
2019-01-01 | mb/google/hatch: Add NC gpios for display and correct the order | Maulik V Vaghela |
2018-12-31 | mb/google/hatch: Enable NVME support for Hatch | V Sowmya |
2018-12-31 | mb/google/hatch: Add the USB port configuration | V Sowmya |
2018-12-31 | mb/google/hatch: Enable SATA for Hatch | V Sowmya |
2018-12-29 | mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spaces | Elyes HAOUAS |
2018-12-29 | mb/google/octopus: Override emmc DLL values for Fleex | Bora Guvendik |
2018-12-29 | mb/google/sarien: Adjust GPD3 pin termination | Lijian Zhao |
2018-12-29 | mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBus | Rizwan Qureshi |
2018-12-28 | mb/google/poppy/variant/nami: add the vbt setting for bard sku | Ren Kuo |
2018-12-28 | mb/google/octopus: Override emmc DLL values for Phaser | Bora Guvendik |
2018-12-28 | mainboard/google/poppy/variants/rammus: Fixed touchscreen function failed | Kane Chenffd |
2018-12-28 | arch/x86: Drop spurious arch/stages.h includes | Kyösti Mälkki |
2018-12-28 | mb/google/hatch: Enable SPI controller for Hatch | Rizwan Qureshi |
2018-12-28 | mb/google/hatch: Enable console UART | Maulik V Vaghela |
2018-12-28 | mb/google/hatch: Enable LPC/eSPI controller | Aamir Bohra |
2018-12-27 | mb/google/hatch: Add SMI handlers | Aamir Bohra |
2018-12-25 | mb/google/hatch: Add HPD GPIO support for displays | Maulik V Vaghela |
2018-12-25 | mb/google/hatch: Modify hatch SPI flash layout | V Sowmya |
2018-12-25 | mb/google/hatch: Enable EC LPC interface and configure IO decode range | Aamir Bohra |
2018-12-25 | mb/google/hatch: Add SoC and EC asl files in DSDT | Aamir Bohra |
2018-12-25 | mb/google/hatch: Add EC trigger events and acpi configs | Aamir Bohra |
2018-12-24 | Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings" | Sumeet Pawnikar |
2018-12-23 | mb/google/hatch: Enable IGD (Integrated GFX Device) | Maulik V Vaghela |
2018-12-23 | mb/google/hatch: Add memory init setup for hatch | Aamir Bohra |
2018-12-22 | mb/google/hatch: Enable Elan Trackpad | Shelley Chen |
2018-12-22 | mb/google/hatch: Fixes to initial hatch mainboard checkin | Shelley Chen |
2018-12-22 | Revert "mb/google/octopus: Add custom SAR values for Bobba" | Justin TerAvest |
2018-12-21 | mb/google/sarien: Disable pcie interface for wwan | Lijian Zhao |
2018-12-21 | mb/google/poppy/variants/atlas: Remove duplicate entry of dptf_enable | Sumeet Pawnikar |
2018-12-21 | mb/google/poppy/variants/nami: Add micron_dimm_MT40A512M16TB-062EJ SPD | Frank Wu |
2018-12-21 | mb/google/poppy/variants/nami: Add micron_dimm_MT40A256M16LY-075F SPD | Ivy Jian |
2018-12-21 | mb/google/hatch: Enable H1 TPM support over SPI interface | Aamir Bohra |
2018-12-21 | mb/google/hatch: Clean up gpio definitions in hatch variant | Aamir Bohra |
2018-12-20 | Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD" | Jenny TC |
2018-12-19 | zoombini: remove support for deprecated zoombini board | Bob Moragues |
2018-12-19 | mb/google/octopus: Override emmc DLL values for Yorp | Bora Guvendik |
2018-12-19 | mb/google/sarien: Enable DMI/SATA power Optimize | Lijian Zhao |
2018-12-19 | mb/google/kahlee: Remove board_id check for Liara 2T timings | Martin Roth |
2018-12-19 | mb/google/variant/nocturne: set CONFIG_NO_FADT_8042 | Nick Vaccaro |
2018-12-19 | google/rambi: disable TXE in devicetree for all variants | Matt DeVillier |
2018-12-19 | google/cyan: set touchscreen GPIO to non_maskable | Matt DeVillier |
2018-12-19 | mb/google/sarien: Use meaningful SATA mode | Lijian Zhao |