summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-03-23google/fizz: Update device tree from schematicShelley Chen
2017-03-23google/fizz: Transfer gpio from schematicShelley Chen
2017-03-23google/fizz: Remove poppy-specific configsShelley Chen
2017-03-23google/fizz: Add new boardShelley Chen
2017-03-22mainboard/google/reef: add nasher variantYH Lin
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
2017-03-21mainboard/google/poppy: Use sideband IRQ for SD Card DetectFurquan Shaikh
2017-03-21google/sand: Add Raydium touchscreen deviceKatherine Hsieh
2017-03-20mainboard/google/snappy: Update _hid name for weida touchscreenWisley Chen
2017-03-19mb/google/reef: Remove CPU throttling effect of the charger sensorSumeet Pawnikar
2017-03-17google/veyron: Clean out unused board variantsJulius Werner
2017-03-17google/veyron: Work around RAM code strapping errorJulius Werner
2017-03-17mainboard/google/poppy: Enable EC SW syncFurquan Shaikh
2017-03-16google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQRizwan Qureshi
2017-03-16google/eve: Use rt5663 interrupt as GpioInt instead of PIRQDuncan Laurie
2017-03-16mainboard/google/reef: Increase PL2 Max to 15WTim Chen
2017-03-15google/eve: Update MCU GPIOs configurationVincent Palatin
2017-03-15google/eve: Apply default AC/DC loadline settingsDuncan Laurie
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
2017-03-15google/eve: Use rt5514 instead of 4ch DMICDuncan Laurie
2017-03-15mainboard/google/reef: Add FPF_STATUS FMAP regionAndrey Petrov
2017-03-14google/sand: Remove support for tablet mode switchKatherine Hsieh
2017-03-12google/poppy: Enable internal pull-up on PWRBTN#Shobhit Srivastava
2017-03-10google/sand: Add devicetree.cb file for sandKatherine Hsieh
2017-03-10mainboard/google/reef: Modify TCPU, TSR2 and TRT tableTim Chen
2017-03-10mainboard/google/reef: Configure SDCARD card detect pinVenkateswarlu Vinjamuri
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
2017-03-09google/poppy: Configure SRCCLKREQ4 as No ConnectNaresh G Solanki
2017-03-09google/pyro: Update DPTF settingsKevin Chiu
2017-03-09mainboard/google/poppy: Enable cros_ec_keyb deviceFurquan Shaikh
2017-03-08mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup sourceFurquan Shaikh
2017-03-08google/eve: Configure GPIOs for new boardDuncan Laurie
2017-03-08mainboard/google/snappy: Override USB2 phy settingWisley Chen
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
2017-03-07google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000ZShunqian Zheng
2017-03-07google/veyron_*: Add new Micron and Hynix modulesDavid Hendricks
2017-03-07google/poppy: fix finger print sensor interrupt gpio configurationRizwan Qureshi
2017-03-02mainboard/google/poppy: Disable deep S3 on poppyFurquan Shaikh
2017-02-25mainboard/google/reef: keep LPSS_UART2_TXD high in suspend stateAaron Durbin
2017-02-25google/eve: Add rise/fall times for I2C busesDuncan Laurie
2017-02-24mainboard/google/poppy: Change touchscreen IRQ to level-triggeredFurquan Shaikh
2017-02-23google/gru: whitespace fixPatrick Georgi
2017-02-23google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection thresholdWilliam wu
2017-02-23google/gru: update the pwm regulatorCaesar Wang
2017-02-23mb/google/poppy: Enable support for DPTFSumeet Pawnikar
2017-02-23google/oak: Add initial support for RowanYidi Lin
2017-02-23google/gru: improve eye diagram for passing the testCaesar Wang
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
2017-02-22google/gru: Fix whitespacePatrick Georgi
2017-02-21mainboard/google/poppy: Enable Realtek 5663 supportRizwan Qureshi
2017-02-21mainboard/google/poppy: Enable Maxim MAX98927 codecRizwan Qureshi
2017-02-21mainboard/google/poppy: Generate required nhlt tableRizwan Qureshi
2017-02-20drivers/i2c: Use I2C HID driver for wacom devicesFurquan Shaikh
2017-02-20google/eve: Set touchscreen I2C bus speed to 1MHzDuncan Laurie
2017-02-20google/eve: Add audio devicesDuncan Laurie
2017-02-20mainboard/{google,intel}: Change config option selectionFurquan Shaikh
2017-02-20mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATORFurquan Shaikh
2017-02-20google/slippy: consolidate variants' common mainboard.asl codeMatt DeVillier
2017-02-20google/eve: Set rise/fall timing values for I2C bus 1Duncan Laurie
2017-02-20google/eve: Fix FPC supportDuncan Laurie
2017-02-17mainboard/eve: select SOC_INTEL_KABYLAKERizwan Qureshi
2017-02-17mainboard/poppy: select SOC_INTEL_KABYLAKERizwan Qureshi
2017-02-17mainboard/google/poppy: Generate digitizer node in SSDTFurquan Shaikh
2017-02-16mainboard/google/eve: Generate FPC device using SPI SSDT generatorFurquan Shaikh
2017-02-15mainboard/google/reef: add sand variantYH Lin
2017-02-14google/eve: change touchpad HIDWei-Ning Huang
2017-02-14google/rambi: add explicit pull-down for ram-idMatt DeVillier
2017-02-14google/poppy: select NO_FADT_8042Jenny TC
2017-02-13mainboard/google/snappy: Update DPTF settingsWisley Chen
2017-02-11mainboard/google/reef: Increase PL1 sampling periodSumeet Pawnikar
2017-02-11google/gru: add scarlet variantphilipchen
2017-02-07mainboards/google/reef: Add support for tablet mode switch.Gwendal Grignou
2017-02-07google/eve: Add support for tablet mode switch.Gwendal Grignou
2017-02-05google/eve: Fix keyboard backlight enable in wake from G3Duncan Laurie
2017-02-04google/jecht: Fix LED for guado/rikku variantsMatt DeVillier
2017-02-04Revert "google/pyro: remove Wacom touchscreen probed flag"Kevin Chiu
2017-02-04google/eve: Fix DRAM DQS mapDuncan Laurie
2017-02-04google/poppy: Set GPIO GPP_D22 highRizwan Qureshi
2017-02-04google/eve: Set GPIO GPP_D22 highDuncan Laurie
2017-02-03mainboard/google/snappy: Set PL2 override to 15000mWHarry Pan
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
2017-01-31google/veyron*: mark GPIO array non-staticPatrick Georgi
2017-01-31mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configurationSathyanarayana Nujella
2017-01-31mainboard/google/reef: Set edge triggered interrupt for GPIO_22Vaibhav Shankar
2017-01-29mainboard/google/snappy: Update WDT touchscreen deviceFurquan Shaikh
2017-01-29mainboard/google/pryo: Update touchscreen device ACPI nodesFurquan Shaikh
2017-01-29i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPIFurquan Shaikh
2017-01-29mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOsVaibhav Shankar
2017-01-26google/pyro: Add USB2 phy setting overrideKevin Chiu
2017-01-26google/pyro: Disable Wacom touchscreen probedKevin Chiu
2017-01-25google/pyro: Modify Wacom touchscreen IRQ type to level-triggeredKevin Chiu
2017-01-24google/eve: Enable PD MCU deviceDuncan Laurie
2017-01-23google/pyro: Update DPTF settingsKevin Chiu
2017-01-22gru: kevin: define GPIOs used on both platformsVadim Bendebury
2017-01-22mainboard/google/reef: Increase TSR1 trigger pointTim Chen
2017-01-22google/eve: Fixes for devicetree settingsDuncan Laurie
2017-01-22google/eve: Enable separate recovery MRC cacheDuncan Laurie
2017-01-22google/eve: Enable keyboard backlight in bootblockDuncan Laurie
2017-01-21mainboard/google/reef: remove internal pullups on PP1800_S railAaron Durbin