summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2017-01-17mainboard/google/reef: Ignore SPI IOSTANDBYLijian Zhao
2017-01-17mainboard/google/snappy: Add PowerResource for ELAN touchscreenWisley Chen
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
2017-01-17google/enguarde,ninja: Prep for variant mergeMatt DeVillier
2017-01-16mainboard/google/poppy: SD card changesFurquan Shaikh
2017-01-16mainboard/google/poppy: Update DQS and DQ Byte mappings for poppyRizwan Qureshi
2017-01-13mainboard/google/poppy: Disable EC SW syncFurquan Shaikh
2017-01-13mainboard/google/poppy: Enable touchscreen in ACPIFurquan Shaikh
2017-01-13mainboard/google/poppy: Correct the index for SPD binariesFurquan Shaikh
2017-01-13mainboard/google/poppy: Enable SD cardFurquan Shaikh
2017-01-13gru: Tuning USB 2.0 PHY0 and PHY1 host-portWilliam wu
2017-01-13google/pyro: Add ELAN touch screen supportKevin Chiu
2017-01-04google/auron: Fix omitted ACPI KB backlight for variantsMatt DeVillier
2017-01-03Revert "google/oak: increase the driving strength for 4GB DRAMs"Nicolas Boichat
2017-01-03google/snappy: Update DPTF settingsWisley Chen
2017-01-03mainboard/google/reef: Update DPTF parameters EVT1_v0.3Tim Chen
2016-12-26google/eve: Enable internal pull-up on PWRBTN#Duncan Laurie
2016-12-26mainboard/google/chell: Set TCC activation offset to 10 degree CSumeet Pawnikar
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
2016-12-22Add/Combine Broadwell Chromebooks using variant board schemeMatt DeVillier
2016-12-22Combine Broadwell Chromeboxes using variant board schemeMatt DeVillier
2016-12-20mb/google/slippy: Hook up libgfxinitArthur Heymans
2016-12-20google/eve: Fix configuration of some GPIOsDuncan Laurie
2016-12-19google/poppy: Add new boardFurquan Shaikh
2016-12-17google/reef: Use exported GPIOs and ACPI regulator for touchscreenFurquan Shaikh
2016-12-16google/eve: Set throttle offset to 10 degreesDuncan Laurie
2016-12-16drivers/i2c/generic: Allow mainboards to export reset and enable GPIOsFurquan Shaikh
2016-12-16google/eve: Enable touch devicesDuncan Laurie
2016-12-16google/eve: Enable native mode for UART pins in bootblockDuncan Laurie
2016-12-15mainboard/google/reef: clear normal MRC cache on recovery retrainAaron Durbin
2016-12-15google/reef: Remove VARIANT_DIR definitionMartin Roth
2016-12-14google/eve: Configure I2C3 pins as GPIO inputsDuncan Laurie
2016-12-13mainboard/google/reef: implement phase enforcement pinAaron Durbin
2016-12-13vendorcode/google/chromeos: Fill in firmware ID regionsPatrick Georgi
2016-12-12google/pyro: Set PL2 override to 15000mWKevin Chiu
2016-12-09mainboard/google/reef: fill in NHLT ACPI OEM header fieldsAaron Durbin
2016-12-09mainboard/google/reef: add board SKU'ing supportAaron Durbin
2016-12-08google/eve: Add ASL code to describe SPI FPC1020 controllerDuncan Laurie
2016-12-08mainboard/google/reef: Set PL2 override to 15000mWSumeet Pawnikar
2016-12-08google/beltino, tidus: simplify led_power_on() functionMatt DeVillier
2016-12-07google/beltino: fix LED, simplify function for Tricky variantMatt DeVillier
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
2016-12-07mainboard/google/reef: adjust chromeos.fmd regionsAaron Durbin
2016-12-06Bob: Update the memory ramid of bobShasha Zhao
2016-12-06Bob: add bob in corebootShasha Zhao
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
2016-12-06google/gru: Power-cycle USB ports in developer/recovery modesJulius Werner
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
2016-12-05mainboard & southbridge: Clear files that are just headersMartin Roth
2016-12-05Add/Combine Haswell Chromebooks using variant board schemeMatt DeVillier
2016-12-05Remove boards google/falco and google/peppyMatt DeVillier
2016-12-02google/pyro: set i2c bus timings by rise/fall timesKevin Chiu
2016-12-02mainboard/google/reef: Add all DMIC endpointsSathyanarayana Nujella
2016-12-01mainboard/google/reef: allow variants to modify nhlt oem revisionAaron Durbin
2016-12-01lib/nhlt: add support for setting the oem_revisionAaron Durbin
2016-12-01lib: put romstage_handoff implementation in own compilation unitAaron Durbin
2016-11-30mainboard/google/snappy: Tune i2c frequency to 400 KhzWisley Chen
2016-11-30mainboard/reef: Add RW_VAR_MRC_CACHEAndrey Petrov
2016-11-30mb/google/oak: replace symbolic linksMartin Roth
2016-11-29google/gru: Tune USB 2.0 PHY to increase compatibilityWilliam wu
2016-11-29google/pyro: disable unused devicesKevin Chiu
2016-11-29mainboard/google/snappy: Add digitizer device to devicetreeWisley Chen
2016-11-29mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95CSumeet Pawnikar
2016-11-29google/oak: Add DRAM configuration for Samsung K4E8E324EBPH Hsu
2016-11-28soc/intel/skylake: Add USB Port Over Current (OC) Pin programmingSubrata Banik
2016-11-28mainboard/google/reef: Set PL1 MAX power limit value to 12WTim Chen
2016-11-25google/parrot: Fix keyboard interrupts, DSDTPrabal Saha
2016-11-24Add Haswell Chromeboxes/Chromebase using variant board schemeMatt DeVillier
2016-11-24Remove board google/pantherMatt DeVillier
2016-11-23google/pyro: Update DPTF settingsKevin Chiu
2016-11-23veyron_*: Remove obsolete ChromeboxesDavid Hendricks
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
2016-11-20mainboard/google/reef: Update DPTF parameters provided from thermal teamTim Chen
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
2016-11-17google/snappy: Update DPTF settingsWisley Chen
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
2016-11-17google/gru: Move to one CA training patternDerek Basehore
2016-11-17google/gru: Add new CA training patternDerek Basehore
2016-11-17google/oak: Add more DRAM modules supportPH Hsu
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
2016-11-15google/link/i915.c: Fix build error when native gfx init enabledIru Cai
2016-11-14google/chell : update DPTF policy settingsSumeet Pawnikar
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li