aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
2019-01-04mb/google/sarien: Add settings for noise mitgationLijian Zhao
2019-01-03mb/google/poppy/variants/nami: Add sku_ids for PantheonFrank Wu
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
2019-01-03src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER)Elyes HAOUAS
2019-01-03mb/google/{auron,jecht}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
2019-01-03mb/google/hatch: Make WP_RO range align with winbond specificationSubrata Banik
2019-01-03mb/google/dragonegg: Make WP_RO range align with winbond specificationSubrata Banik
2019-01-02mb/google/octopus/variants: Add 20ms reset delay for WACOM deviceMarco Chen
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
2018-12-29mb/google/octopus: Override emmc DLL values for FleexBora Guvendik
2018-12-29mb/google/sarien: Adjust GPD3 pin terminationLijian Zhao
2018-12-29mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBusRizwan Qureshi
2018-12-28mb/google/poppy/variant/nami: add the vbt setting for bard skuRen Kuo
2018-12-28mb/google/octopus: Override emmc DLL values for PhaserBora Guvendik
2018-12-28mainboard/google/poppy/variants/rammus: Fixed touchscreen function failedKane Chenffd
2018-12-28arch/x86: Drop spurious arch/stages.h includesKyösti Mälkki
2018-12-28mb/google/hatch: Enable SPI controller for HatchRizwan Qureshi
2018-12-28mb/google/hatch: Enable console UARTMaulik V Vaghela
2018-12-28mb/google/hatch: Enable LPC/eSPI controllerAamir Bohra
2018-12-27mb/google/hatch: Add SMI handlersAamir Bohra
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
2018-12-25mb/google/hatch: Modify hatch SPI flash layoutV Sowmya
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
2018-12-22Revert "mb/google/octopus: Add custom SAR values for Bobba"Justin TerAvest
2018-12-21mb/google/sarien: Disable pcie interface for wwanLijian Zhao
2018-12-21mb/google/poppy/variants/atlas: Remove duplicate entry of dptf_enableSumeet Pawnikar
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A512M16TB-062EJ SPDFrank Wu
2018-12-21mb/google/poppy/variants/nami: Add micron_dimm_MT40A256M16LY-075F SPDIvy Jian
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
2018-12-20Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD"Jenny TC
2018-12-19zoombini: remove support for deprecated zoombini boardBob Moragues
2018-12-19mb/google/octopus: Override emmc DLL values for YorpBora Guvendik
2018-12-19mb/google/sarien: Enable DMI/SATA power OptimizeLijian Zhao
2018-12-19mb/google/kahlee: Remove board_id check for Liara 2T timingsMartin Roth
2018-12-19mb/google/variant/nocturne: set CONFIG_NO_FADT_8042Nick Vaccaro
2018-12-19google/rambi: disable TXE in devicetree for all variantsMatt DeVillier
2018-12-19google/cyan: set touchscreen GPIO to non_maskableMatt DeVillier
2018-12-19mb/google/sarien: Use meaningful SATA modeLijian Zhao
2018-12-19mb/google/sarien: Enable ELAN Touchpad and Disable ALPS TouchpadChris Zhou
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
2018-12-19mb/google/octopus/var/ampton: Tune I2C AudioJustin TerAvest
2018-12-18Revert "google/sarien: Increase BIOS region to 28MB"Lijian Zhao
2018-12-18mb/google/sarien/variants/arcada: Enable touchpad and touchscreenCasper Chang
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
2018-12-18mb/google/poppy/variants/nami: Add sku_ids for SyndraAmanda Huang
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
2018-12-17mb/google/poppy/variants/nami: perform PL2 setting for bard/ekkoRen Kuo
2018-12-15mb/{intel,google}/{icelake_rvp,dragonegg}: make use of cpu_get_cpuid() helper...Subrata Banik
2018-12-14cheza: Add board reset via Chrome ECJulius Werner
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
2018-12-14google/grunt: Correct mismatch character hynix-H5AN8G6NAFR-UH.spd.hex SPD fil...Lucas Chen
2018-12-14google/grunt: Correct mismatch character hynix-H5ANAG6NAMR-UH.spd.hex SPD fil...Lucas Chen
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
2018-12-12cheza: board-level GPIO supportT Michael Turney
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
2018-12-12cheza: TPM/EC enable Kconfig in mainboardT Michael Turney
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
2018-12-11mb/google/sarien: Disable unused SATA portsLijian Zhao
2018-12-11mb/google/sarien: Disable PCH Gigabit LANLijian Zhao
2018-12-11mb/google/poppy/variants/nami: Modify SPD for hynix memory partRen Kuo
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
2018-12-10mb/google/sarien: Update GPIOs for next buildDuncan Laurie
2018-12-10mb/google/sarien: Setup GPIOs again after FSP-SDuncan Laurie
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
2018-12-09mb/google/sarien: Enable LAN clock source usageLijian Zhao
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
2018-12-07mb/google/sarien: Enable ISH on arcada, disable on sarienDuncan Laurie
2018-12-07mb/google/kahlee: Use new VBIOS if liaraRichard Spiegel
2018-12-07mb/google/sarien: Set initial I2C bus rise/fall timesDuncan Laurie
2018-12-06rammus: ELAN touchpad I2C special timing requirementkane_chen
2018-12-06mb/google/sarien/variants/sarien: Enable melf touchscreenChris Zhou
2018-12-05mb/google/sarien: Enable ISHJett Rink
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 10:55:48 +0000