Age | Commit message (Expand) | Author |
2019-09-10 | mb/google/poppy/variant/nocturne: add EC_SYNC_GPIO | Nick Vaccaro |
2019-09-10 | mb/google/hatch/variants/helios: Modify FPU power on sequence | Frank_Chu |
2019-09-10 | mb/google/octopus: Add a new sku for meep | Wisley Chen |
2019-09-10 | mb/google/kahlee/treeya: Tune I2C bus 1, 2 and 3 clock | Peichao Wang |
2019-09-09 | mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectively | Peichao Wang |
2019-09-09 | lib/spd_bin: Extend DDR4 spd information | Eric Lai |
2019-09-09 | mb/google/drallion: modify USB setting | Eric Lai |
2019-09-06 | mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2 | Frank_Chu |
2019-09-05 | mb/google/octopus: Set sar file name for meep sku | Wisley Chen |
2019-09-05 | mb/google/drallion: modify PCIE setting | Eric Lai |
2019-09-05 | mb/google/octopus: Load custom SAR values by SKU ID for Bloog | Tony Huang |
2019-09-04 | mb/google/kahlee/treeya: Update the memory timing table for Treeya to the 2T ... | Peichao Wang |
2019-09-04 | mb/google/kahlee/treeya: override sku_id() function | Peichao Wang |
2019-09-04 | mb/google/hatch/var/kindred: Update DPTF parameters and TDP PL1/PL2 | David Wu |
2019-09-03 | mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200 | David Wu |
2019-09-02 | mb/google/drallion: add memory sku id | Eric Lai |
2019-09-02 | mb/google/drallion: Enable HDA for drallion platform | Aamir Bohra |
2019-09-02 | mb/google/hatch/var/helios: Increase touchscreen reset delay to 120ms | Philip Chen |
2019-08-30 | mb/google/octopus/variants/garg: update new SKU | Kevin Chiu |
2019-08-30 | mb/google/kahlee/variants/careena: override DRAM SPD table | Kevin Chiu |
2019-08-30 | google/buddy: adjust CID for realtek audio codec | Matt DeVillier |
2019-08-30 | mb/google/drallion: change servo board debug to UART 0 | Eric Lai |
2019-08-30 | mb/google/hatch: Add settings for noise mitgation | Dtrain Hsu |
2019-08-30 | mb/google/hatch: Add 16G 3200 generic SPD file | Shelley Chen |
2019-08-29 | arch/arm: Make ARM stages select ARCH_ARM | Arthur Heymans |
2019-08-29 | mb/google/drallion: Update memory map | Bernardo Perez Priego |
2019-08-29 | mb/google/drallion: Correct drallion HWID and add HWID for variants | Mathew King |
2019-08-28 | google/rambi,intel/baytrail: Simplified romstage flow | Kyösti Mälkki |
2019-08-28 | mb/google/hatch/variants: Increase touchscreen reset delay to 120ms | Sumeet Pawnikar |
2019-08-28 | google/leon: Add DRIVERS_I2C_RTD2132 | Kyösti Mälkki |
2019-08-28 | mb/google/hatch: Enable Override DLLs for Kindred | Jamie Chen |
2019-08-28 | mb/google/hatch: Override DLL values for Kindred | Jamie Chen |
2019-08-28 | mb/google/drallion: remove GBE file | Eric Lai |
2019-08-28 | mb/google/drallion: add dummy SPD file | Eric Lai |
2019-08-28 | mb/google/poppy/variant/nami: add sku ids of bard/ekko | Ren Kuo |
2019-08-26 | soc/intel: Use common romstage code | Kyösti Mälkki |
2019-08-26 | Split MAYBE_STATIC to _BSS and _NONZERO variants | Kyösti Mälkki |
2019-08-26 | google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAG | Yu-Ping Wu |
2019-08-26 | google/link: fix detection of dimm on channel 1 | Matt DeVillier |
2019-08-24 | mb/google/octopus: Re-assign sku number for vortininja | Wisley Chen |
2019-08-23 | mb/google/hatch/var/kindred:: Add enable signal for touch screen | Philip Chen |
2019-08-23 | mb/google/hatch/variants/kindred: Remove unused devices | Philip Chen |
2019-08-23 | mb/google/rambi: update GPIO, RAM config for clapper | Matt DeVillier |
2019-08-23 | Revert "mb/google/octopus: Disable WLAN prior the entry of S5" | Kane Chen |
2019-08-23 | mb/google/drallion: Add two variants - arcada_cml & sarien_cml | Thejaswani Putta |
2019-08-23 | mb/google/kukui: Add panel for Kodama | Peichao Wang |
2019-08-22 | mb/google/kukui: Add flapjack panels | Hung-Te Lin |
2019-08-21 | mb/google/kukui: Move panel description to CBFS files | Hung-Te Lin |
2019-08-21 | mediatek/mt8183: add scp voltage initialization | Hsin-Hsiung Wang |
2019-08-21 | arch/x86: Rename some mainboard_romstage_entry() | Kyösti Mälkki |
2019-08-21 | mb/google/kohaku: Correct DPTF temp sensor IDs | Seunghwan Kim |
2019-08-21 | mb/google/octopus/variants/bloog: Add G2Touch touchscreen support | Tony Huang |
2019-08-21 | mb/google/kahlee/treeya: Update Raydium TS device ACPI nodes | Chris Wang |
2019-08-21 | mb/google/kahlee/treeya: remove keyboard backlight support | Chris Wang |
2019-08-21 | mb/google/kahlee/treeya: Use GPIO_10 for EC_SYNC_IRQ | Chris Wang |
2019-08-21 | mb/google/kahlee/treeya: Add EC_ENABLE_TBMC_DEVICE | Chris Wang |
2019-08-21 | mb/google/kahlee/treeya: Enable Synaptics touchpad and | Peichao Wang |
2019-08-20 | mb/google/hatch: Skip SD card controller WP pin configuration from FSP | Aamir Bohra |
2019-08-20 | mb,autoport: Fix GCC 9 Port_List build error | Jacob Garber |
2019-08-20 | mb/google/{eve,glados}: Copy channel arrays separately | Jacob Garber |
2019-08-20 | mb/google/kohaku: Use level trigger for touchscreen interrupt | Seunghwan Kim |
2019-08-20 | google/stout: Use MAYBE_STATIC | Kyösti Mälkki |
2019-08-20 | google/butterfly: Replace use of __PRE_RAM__ | Kyösti Mälkki |
2019-08-19 | google/rambi: Replace __PRE_RAM__ with ENV_ROMSTAGE | Kyösti Mälkki |
2019-08-19 | mainboard/google: Remove use of __PRE_RAM__ | Kyösti Mälkki |
2019-08-18 | cpu/intel: Enter romstage without BIST | Kyösti Mälkki |
2019-08-16 | mediatek/mt8183: Add SAMSUNG 4GB LPDDR4X discrete DDR support | Huayang Duan |
2019-08-16 | mb/google/hatch: Create Akemi variant | Peichao Wang |
2019-08-15 | mb/google/hatch/var/kindred: Configure GPIOs for eMMC SKUs | David Wu |
2019-08-15 | mb/google/hatch/var/kindred: Disable SATA controller for eMMC SKUs | David Wu |
2019-08-15 | mb/google/hatch/var/kindred: Configure GPIOs for SSD SKUs | David Wu |
2019-08-15 | mb/google/hatch/var/kindred: Disable eMMC for new SKU ID 23 and 24 | David Wu |
2019-08-15 | mainboard/google: Fix indirect includes | Kyösti Mälkki |
2019-08-15 | mb/google/kukui: Report panel manufacturer name | Hung-Te Lin |
2019-08-15 | soc/mediatek: Change DSI init commands to take flexible length array | Hung-Te Lin |
2019-08-15 | mb/google/kukui: Support eDP panels via PS8640 | Hung-Te Lin |
2019-08-15 | mb/google/kukui: Add panel for Kodama | Peichao Wang |
2019-08-15 | mb/google/kukui: Add panel for Kukui | Hung-Te Lin |
2019-08-15 | mb/google/kukui: Add panels for Krane | Jitao Shi |
2019-08-15 | mb/google/kukui: Initialize display | Hung-Te Lin |
2019-08-15 | soc/mediatek: dsi: Support sending MIPI init commands | Hung-Te Lin |
2019-08-13 | mb/google/hatch/var/kohaku: Change Atmel touchscreen HID to PRP0001 | Furquan Shaikh |
2019-08-13 | mb/google/hatch: Kohaku: Enable DMIC1 in device tree | Mac Chiang |
2019-08-11 | kohaku: add TEMP_SENSOR_3 and TEMP_SENSOR_4 to DPTF | Paul Fagerburg |
2019-08-11 | mb/google/hatch: Fix Kohaku pen GPIO configuration | Tim Wawrzynczak |
2019-08-10 | mb/google/octopus: Add G2touch touchscreen support | Wisley Chen |
2019-08-09 | google/drallion: Fix build issue due to recent merge | Kyösti Mälkki |
2019-08-09 | soc/intel/{cnl,icl}: Use new power-failure-state API | Nico Huber |
2019-08-09 | soc/mediatek/mt8173: Remove dual DSI mode | Hung-Te Lin |
2019-08-09 | mb/google/sarien/variants/sarien: Set PCH Thermal Trip point to 77 degree C | Sumeet Pawnikar |
2019-08-09 | mb/google/sarien/variants/arcada: Set PCH Thermal Trip point to 77 degree C | Sumeet Pawnikar |
2019-08-09 | mb/google/hatch: Refactor override_early_gpio_table | Tim Wawrzynczak |
2019-08-07 | mb/google/hatch: Kohaku: Re-setup dual-routing of EMR_GARAGE_DET | Tim Wawrzynczak |
2019-08-07 | mb/google/hatch: Kohaku: Add touchscreen controller to device tree | Tim Wawrzynczak |
2019-08-07 | mb/google/kohaku: Enable stylus pen device | Seunghwan Kim |
2019-08-07 | mb/google/octopus: Add custom SAR value for Vortininja | Wisley Chen |
2019-08-05 | mb/google/helios: Set SPKR_PA_EN PIN high for boot beep | Subrata Banik |
2019-08-05 | mb/google/octopus: Add EMRight digitizer support | Wisley Chen |
2019-08-05 | mb/google/drallion: Add new mainboard | Thejaswani Putta |
2019-08-05 | mb/google/sarien: Increase Wacom touchscreen reset delay to 120 ms | Casper Chang |