summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
Create new variant for jinlon BUG=b:144150654 TEST=emerge-hatch coreboot chromeos-bootimage and boot on jinlon proto board Change-Id: I8deb29041475e38cbbf2f54519940f62b9f21822 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36681 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-19Remove google/urara mainboardJulius Werner
This board never really existed and nobody has any hardware left over for it. Change-Id: Icdba4f5209725995e4a55dcdbc299a9e91a5869a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-19mb/google/octopus: Disable fmap cache for meepPatrick Georgi
By removing this code, we get approximately back to where the board was before the fmap cache feature was added, which is small enough for the Chromium OS default configuration for the board to fit into the 32KB that the bootblock can use on the chipset again. Change-Id: I52c0c30a14929913ded144bf086c12938e9c2699 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge/mrc: Handle P2P disabling via devicetreeNico Huber
Some Sandy Bridge boards disabled the PCI-to-PCI bridge early to avoid probing by the MRC. We can do that for all boards instead, based on the devicetree setting. Change-Id: Ie64774628fde77db2a379bdba6a921a31e52fa0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/google(sandybrige): Clean up LPC and IOAPIC configurationNico Huber
Only set LPC decode bits that the generic PCH code doesn't set yet. And don't enable the IOAPIC, which is already done by generic code. Change-Id: I9d2f6a9ad3f5d83573e07596f2763edc75f4ee64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18nb/intel/sandybridge: Set up console in bootblockArthur Heymans
Change-Id: Ia041b63201b2a4a2fe6ab11e3497c460f88061d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between romstage and bootblock. LPC setup and BAR initialization is now done twice. The rationale is that the romstage should not depend too much on the bootblock, since it can reside in a RO fmap region. Enabling the console will be done in a followup patch. Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18sb/intel/bd82x6x: Make the pch_enable_lpc hook optionalArthur Heymans
This also changes the name to mainboard_pch_lpc_setup to better reflect that it is an optional mainboard hook. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_rcba_config hook optionalArthur Heymans
This also changes the name to mainboard_late_rcba_config to better reflect what it does. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_early_init hook optionalArthur Heymans
This adds an empty weakly linked default. The rationale behind this change is that without the callback some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I62c8010aa81fc45d208e9293feb2f45b45f34a82 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
Setting GPP_A10 to NC now that older boards are deprecated and this GPIO is not in use anymore. BUG=b:142056166 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
Add a new Kukui follower 'kakadu'. BUG=None TEST=make # select kakadu Change-Id: I9f25ce90285828c43435e45d9361ee7128d407fa Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36848 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: Add SX9310 sensor to devicetreeSheng-Liang Pan
Add semtech SAR sensor. BUG=b:143449140 BRANCH=octopus TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address. Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: support LTE power sequenceSheng-Liang Pan
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15vboot: use vboot persistent contextJoel Kitching
vb2_context object is now stored on the workbuf as part of vb2_shared_data. Use vboot's new API functions vb2api_init and vb2api_relocate to create and move the workbuf. BUG=b:124141368, chromium:994060 TEST=Build locally BRANCH=none Change-Id: I051be1e47bf79b15a1689d49a5d4c031e9363dfa Signed-off-by: Joel Kitching <kitching@google.com> Also-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1902339 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-11-14soc/qualcomm: Link cbmem.c only in romstageArthur Heymans
Change-Id: I008fcca024fecf462c4b550b8dedbf4b06e491b8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36368 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch: clean manufacturing information in spdWisley Chen
Clean the vendor/manufacturing information in 16G_3200_4bg spd to become generic spd. BUG=None TEST=emerge-hatch coreboot Change-Id: I163dc4631a6b71efd36c75cfe1fc759040113387 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36810 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
1. ram id 8: 16G 2666 2 bank groups memory 2. ram id 9: 16G 3200 4 bank groups memory BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: Ic63d911458b59de11c12ce776f6f7d04b1eb3b6c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36667 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
Set GPP_C4 default to low to fix leakage voltage problem on touchscreen during power on. BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure touchscreen works. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie9197192c9d6dfb30c10559990c6010b1b2d3a45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36670 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mainboard/google/hatch: Create helios_diskswap variantAlexis Savery
Created helios_diskswap as a variant of helios (hatch variant). BUG=b:143378037 BRANCH=None TEST=none Change-Id: I6536b3908ec569e1ac42ea7c5be85701012ab177 Signed-off-by: Alexis Savery <asavery@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-12/mb/google/hatch: add new memory config supportWisley Chen
1. Add 16G 2666 2 bank group 2. Add 16G 3200 4 bank group BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: I04810091ef2bf8ec1bd306ad141a70436638eac8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-11-12mb/google/kukui: Add new configs 'damu' and 'kappa'Hung-Te Lin
New boards introduced to Kukui family. BUG=None TEST=make # select damu and kappa Change-Id: I7154aeee921114b7d12bf586adca250df19a3883 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-11mb/{google/fizz,razer/blade_stealth_kbl}: Add missing include ↵Elyes HAOUAS
<console/console.h> Change-Id: Ia4e496d359036591131c1ec0243d64c58823ca63 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
With the 0.71586+ Goodix FW, we can reduce the reset delay from 500ms to 120ms. We should do the change in coreboot device tree after we ensure Helios DVT build is flashed with 0.71586+ Goodix FW. BUG=b:142316026 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I000ee4ea84c598b437992f1000f6e5b561cae605 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2019-11-09arch/x86: Replace some __SMM__ guardsKyösti Mälkki
We generally do not guard source in attempts to reduce the final object sizes, but rely on garbage collection. Most of the __unused attributes inserted here will be removed when remaining __SIMPLE_DEVICE__ guards can be removed. Change-Id: I2440931fab4f41d7e8249c082e6c9b5a9cd0ef13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09ELOG: Introduce elog_gsmi variantsKyösti Mälkki
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate. Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-08google/stout: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Ie0a1349ab460142dc2744155a422b5ee22528e4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08google/parrot: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Idf7b04edc3fce147f7857691ce7d6a0ce03f43fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08arch/x86: Drop some __SMM__ guardsKyösti Mälkki
Change-Id: I64063bbae5b44f1f24566609a7f770c6d5f69fac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
Akemi platform dosen't support WWAN device and unused USB2 port 3, 4, 5, 7, 8 and USB3 port 3, 4, 5 so close them. BUG=None TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I7eff4da77caea7d4fe46597320be134d34d78a22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-07hatch: Create puff variantEdward O'Callaghan
Includes: - gpio mappings, - overridetree.cb, - kconfig adjustments for reading spd over smbus. V.2: Rework devicetree with comments and drop some useless gpio maps. BUG=b:141658115 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I6449c4fcc1df702ed4f0d35afd7b0981e4c72323 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-11-07mainboard/google: Allow Hatch variants to read SPD data over SMBusEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. This romstage variant allows for reading the SPD data over SMBus. V.2: Dispence with memcpy(). V.3: Revert back to previous patch with memcpy(). V.4: Rewrite again to avoid memcpy(). BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I3516a46b91840a9f6d1f4cffb2553d939d79cda2 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36449 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
The previous values do not affect the touchscreen function. But, the previous values cause the power leakage in S0ix. from b/142368161: 1. Modify GPP_D: The specification define T1 >= 10ms. We change it to 12ms for a safety and low impact value in our mind. Enable pin as GPP_D9 is define to be AVDD in specification. Set it to 10ms to make it to be the final one to pull low during power off sequence . 2. Add GPP_C4: If we set stop_off_delay_ms to be 1. The true T4 we got will be 300us . Set stop_off_delay_ms to be 2 . True T4 will be 500us . So we change it to 5 to be a low impact value in our mind according to the true T4 value we got . BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-bootimage ./util/abuild/abuild -p none -t google/hatch -x -a Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86c920ff1d5c0b510adde8a37f60003072d5f4e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Override smbios enclosure type for drallionMathew King
Drallion can be either a clamshell or convertible depending on the presence of the 360 sensor board. Set the smbios type 3 enclosure type to either CONVERTIBLE or LAPTOP accordingly. BUG=b:143701965 TEST='dmidecode -t 3' Type = Convertible with sensor board connected Type = Laptop with sensor board disconnected Change-Id: I766e9a4b22a490bc8252670a06504437e82f72d5 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36512 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Consolidate 360 sensor board detectionMathew King
Create a single function to determine if the 360 sensor board is present on a device. BUG=b:143701965 TEST='emerge-drallion coreboot' Change-Id: I4100a9fdcfe6b7134fb238cb291cb5b0af4ec169 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-11-06mainboard/google: Rework Hatch so that SPD in CBFS is optionalEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ie1637d08cdd85bc8d7c3b6f2d6f386d0e0c6589b Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
Update thermal threshold settings for TSR3 sensor. There is an issue fan is always running, even during system idle state. This change fixes this issue and fan starts only when it breaches the temperature threshold. BRANCH=None BUG=b:143861559 TEST=Built and tested on Helios system Change-Id: Ia417f8c51442005cc8c2251c188cebc197e0a773 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36609 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05mb/google/kahlee/treeya: Update STAPM parameters for TreeyaPeichao Wang
Tune stapm percentage from 80 to 68 and time from 250 second to 90 second make them meet Lenovo temperature spec. BUG=b:143859022 TEST=build firmware and install it to DUT and run fishbowl 1000, check temperature whether meets spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I254140c9d242ed918b3b689d4fb4a1d0e871cd55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-11-04google/auron: hook up libgfxinitMatt DeVillier
Internal/external displays functional on all variants other than Samus. Unable to verify external outputs on Samus (USB-C using DP/HDMI adapter). Test: build/boot lulu variant with libgfxinit, verify internal/ external displays functional prior to OS display driver loaded. Both linear framebuffer and scaled VGA text modes functional. Change-Id: I867b2604861ebae02936e7fc0e7230a6adcb2d20 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
Update emmc DLL values for Kindred BUG=b:131401116 BRANCH=none TEST=Boot to OS 100 times on Kindred EVT Change-Id: Ibd840b31bb0e5a742495758de55b532e6c3946aa Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-11-04mb/*/*/others: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Iabfd680fdb50534e6b9f6cfdecda9f8de0f8a610 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04sb/intel/lynxpoint: Use sb/intel/common/platform.aslArthur Heymans
Change-Id: I86260a374a3f60f16dc73573e7989f0a4ffec818 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04include: Remove EC_EVENT_* from elog.hYu-Ping Wu
All of the EC_EVENT_* macros can be replaced with the EC_HOST_EVENT_* macros defined in ec_commands.h, which is synchronized from Chromium OS ec repository. BRANCH=none BUG=none TEST=emerge-kukui coreboot Change-Id: I12c7101866d8365b87a6483a160187cc9526010a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-04mb/*/*{bd82x6x/ibexpreak}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: I36095422559e6c160aa57f8907944faa4c192dee Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/google/drallion: Update GPIO tableEric Lai
Follow latest GPIO table to change gpio. BUG=b:143728355 BRANCH=N/A TEST=build pass Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iee61c74a5cab5a62a90c0543f212650c4f2420de Reviewed-on: https://review.coreboot.org/c/coreboot/+/36524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-04mb/google/drallion: Correct GPP_E7 as stop pinEric Lai
Current design reset pin is connected to PLTRST. GPP_E7 is stop pin for touch. Reserve reset pin for next stage implement. BUG=b:143733039 BRANCH=N/A TEST=check touch screen can work properly Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3ebd56ab49b87da425583da04f082e69293a023e Reviewed-on: https://review.coreboot.org/c/coreboot/+/36535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-04mb/google/drallion: fix GPP_E16 glitch when enter S5Eric Lai
Set GPP_E16 reset to DEEP. BUG=b:143057255 BRANCH=N/A TEST=Measure GPP_E16 from S0 to S5 has no glitch Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I63932c6f5c8b7e6e9ab8aa55e69c629d29e7d1fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/36511 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/google/drallion: Add second touch pad supportEric Lai
Add second source touch pad with i2c address 0x15. BUG=b:142629138 BRANCH=N/A TEST=check new touch pad can work properly Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icc58dbcf307f11c368a1a5408f32111ed5841d39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-01soc/intel/{cnl,icl}: Move globalnvs.asl/nvs.h into common/block/Subrata Banik
This patch creates a common instance of globalnvs.asl/nvs.h inside intel common code (soc/intel/common/block/) and ask cnl & icl soc code to refer globalnvs.asl and nvs.h from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify GNVS operation region presence after booting to OS. Change-Id: Ia9fb12a75557bd7dc38f6d22ba2b32065d18b3ee Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/google/kukui: Unselect FATAL_ASSERTElyes HAOUAS
FATAL_ASSERT is used for debugging purpos. Don't select it by default. Change-Id: If4d521827f3d50fb662b89b24d00fb0517e7af2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-11-01trogdor: Add mainboard gpio supportT Michael Turney
Change-Id: I06cdb8eaaf7f74b47e1d1283dcaa765674ceaa45 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36070 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-31mb/google/drallion: Turn off HDMI power when enter s0ix and S5Eric Lai
Turn off HDMI power when enter s0ix and S5. BUG=b:143057255 BRANCH=N/A TEST=Measure the power on GPP_E16 under s0ix and S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I580e6094d48663d5c208fd82c7744485d899bcc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36224 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
Modify DPTF parameters. Modify TDP PL1 values to 15. Remove TCHG Level 3 - 0.5A. BUG=b:131272830 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0e5c079856a167b1c2ef52e446d055404e565858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35794 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30hatch: refactor gpio table into baseboard, allow empty SPDsPaul Fagerburg
Each variant needed to define variant_early_gpio_table(), even if it didn't need to make any changes. Added a __weak version of the function into baseboard/gpio.c. Certain upcoming Hatch variants will not use SPD files. Allow SPD_SOURCES in spd/Makefile.inc to be empty. BUG=None BRANCH=None TEST=Build coreboot and see that it builds without error Change-Id: Ie946cfd7c071824168faa38fd53bd338a5a451e1 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-28mb/google/sarien/arcada: Add support for Cirque TouchpadKarthikeyan Ramasubramanian
Add Cirque Touchpad devicetree configuration to export relevant ACPI objects to the kernel. BUG=b:141259109 BRANCH=sarien TEST=Boot to ChromeOS. Ensure that relevant ACPI objects are exported in the SSDT. Change-Id: I91dcb27b86c6a2bed5579f1f6c1102871d55b315 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-27mb/google/poppy/variant/nocturne: don't invert GPP_D17Nick Vaccaro
This change removes an inversion of GPP_D17 that caused the device to get stuck in a reboot loop because the kernel was crashing within the first couple seconds of kernel boot. BUG=b:142515200 BRANCH=none TEST=Flash and boot nocturne, verify boot is stable and that device doesn't reboot after jumping into kernel, and that it passes the 'tast -verbose run <ip> hardware.SensorRing' test. Change-Id: Ia1408ef6ea92f6b31a9f3eee8720954af3a7c382 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35967 Reviewed-by: Yicheng Li <yichengli@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27Dragonair: Add sku23Wisley Chen
BUG=b:142987639 TEST=emerge-hatch coreboot Change-Id: I0ff1a81d0579d0b328a48bc7d4f867592ec63e8b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-27src/mainboard: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I46d131f76ec930d2ef0f74e6eaabae067df10754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-27src: Use 'include <boot/coreboot_tables.h>' when appropriateElyes HAOUAS
Change-Id: I3d90e46ed391ce323436750c866a0afc3879e2e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36359 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25trogdor: Provide initial mainboard supportT Michael Turney
Change-Id: Ic2f0944b92dcad7048a0c38720d2ef3c855ef007 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-25src/mainboard: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Change-Id: I50cafce0aaf465ee95562ccff6c8f63fb22096c0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-25mb/google/{glados,dragonegg}: Configure GPIOs in mainboard chip->init()Furquan Shaikh
mainboard_silicon_init_params() is supposed to be used for only overriding any FSP params as per mainboard configuration. GPIOs should be configured by mainboard as part of its chip init(). This ensures proper ordering w.r.t. any common operations that the SoC code might want to perform e.g. snapshot ITSS polarities. This change moves the configuration of GPIOs from mainboard_silicon_init_params() to mainboard chip->init(). Change-Id: I5d10c01c5b9d5f8ed02274d51dcf9c2a17269685 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36270 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25mb/google/{drallion,sarien}: Configure GPIOs in mainboard chip->init()Furquan Shaikh
mainboard_silicon_init_params() is supposed to be used for only overriding any FSP params as per mainboard configuration. GPIOs should be configured by mainboard as part of its chip init(). This ensures proper ordering w.r.t. any common operations that the SoC code might want to perform e.g. snapshot ITSS polarities. This change moves the configuration of GPIOs from mainboard_silicon_init_params() to mainboard chip->init(). Change-Id: I5cd89c6e24b6a4b0c20fd476915f3781a0d46e0d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36269 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25mb/google/{poppy,eve,fizz}: Configure GPIOs in mainboard chip->init()Furquan Shaikh
mainboard_silicon_init_params() is supposed to be used for only overriding any FSP params as per mainboard configuration. GPIOs should be configured by mainboard as part of its chip init(). This ensures proper ordering w.r.t. any common operations that the SoC code might want to perform e.g. snapshot ITSS polarities. This change moves the configuration of GPIOs from mainboard_silicon_init_params() to mainboard chip->init(). Change-Id: Ied0201b954894acd3503801e7739b91a2cc9b4a8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36268 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25mb/google/hatch: Configure GPIOs in mainboard chip->init()Furquan Shaikh
mainboard_silicon_init_params() is supposed to be used for only overriding any FSP params as per mainboard configuration. GPIOs should be configured by mainboard as part of its chip init(). This ensures proper ordering w.r.t. any common operations that the SoC code might want to perform e.g. snapshot ITSS polarities. This change moves the configuration of GPIOs from mainboard_silicon_init_params() to mainboard chip->init(). Additionally, this change moves mainboard_ec_init() to mainboard dev->init(). TEST=Verified that GPIOs are configured properly and hatch boots to OS. Change-Id: Ia509471a3678c60454cd4f14625f151860d9b9d2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25mb/google/hatch: Set DSM parameters for HeliosCheng-Yi Chiang
Set VPD keys for DSM parameters in overridetree.cb for Helios. RT1011 driver will load values from VPD and set them to device property. BUG=b:140397934 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Change-Id: Ic72fd57becf93e70a1a716dbb76633509f2fd5c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-25mb/google/hatch: Fix speaker mapping for HeliosCheng-Yi Chiang
The correct mapping for speakers to their names should be: uid 0: Woofer Left uid 1: Woofer Right uid 2: Tweeter Left uid 3: Tweeter Right Also, fix the name to be 4-character. BUG=b:140397934, b:143192767 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. And the speaker mapping is correct. Change-Id: I353fb9ad0ca8ec85431eb2b59be748b4887278cf Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36256 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/hatch/var/akemi: Update DPTF thermal sensor for AkemiPeichao Wang
Add thermal sensor: TSR2 to ACPI table, monitor CPU temperature BUG=b:143046086 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id150c5c3cb6d07407fd20417237457b5722e6f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/36052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com>
2019-10-24mb/google/octopus: Override VBT selection for Dorp/Vortininja/VorticonTony Huang
Add enum for Vorticon sku. Vortininja/Vorticon will load vbt_vortininja.bin Dorp will load vbt_dorp.bin BUG=b:143197918 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU-ID sets to Dorp/Vortininja/Vorticon. Change-Id: I67d7a8ab62a1838b0a0a05f532d8b067ece686d9 Cq-Depend: chrome-internal:2026287 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-24mb/google/{butterfly,link,parrot}: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Found-by: ACPICA 20191018 Change-Id: I8bcdfa7a4dc33c3e3866d3135249a602379b9615 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36265 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/hatch: Select RT1011 and CHROMEOS_DSM_CALIB for HeliosCheng-Yi Chiang
Use RT1011 driver for Helios. Select CHROMEOS_DSM_CALIB to set device properties for RT1011 speaker calibration. BUG=b:140397934 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Change-Id: I1010be15466c5060aa1d73318393853a2515daac Reviewed-on: https://review.coreboot.org/c/coreboot/+/36030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-22mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatchKane Chen
On hatch and variant HW designs supports VCCPRIM_CORE Low Voltage Mode. VCCPRIM_CORE can be down to 0.75v when slp_s0 is asserted. This commit enables PchPmSlpS0Vm075VSupport UPD so that FSP can program related setttings to save power. BUG=b:134092071 TEST=Run suspend_stress_test on kohaku and pass 100 cycles Change-Id: Ia02ff8823883489b36349457213409496f082f36 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-22google/chell: Update ICC_MAX configurationMatt DeVillier
Correct ICC_MAX values per SKL-Y EDS spec. Adapted from chromium commit 1c4e89e8 [Chell: Update ICC_MAX configuration] Original-Change-Id: Ic660cc6a2d11e995a86a30ddde800d096d93e012 Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/593715 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ia31ce432cf979d574d84e9205a287f87de5de057 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner
2019-10-22mb/google/drallion: Change touch enable pin default valueEric Lai
Change GPP_B21 default to low. This can prevent power leakage of non-touch sku. BUG=b:142849034 BRANCH=N/A TEST=Measure the power of non-touch sku, check GPP_B21 is 0V. Boot up with touch sku and check touch functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I80a3e5dc224e4dab97c21fd469d8c3f2d3e774e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com>
2019-10-22mb/mainboard/hatch: support Goodix touch panel for AkemiPeichao Wang
Configure enable pin GPP_D9 pull high when active BUG=b:143046441 TEST=build bios and verify touch screen works fine Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I83060f31d4d22c9be05bba119816c6aa66e4126c Reviewed-on: https://review.coreboot.org/c/coreboot/+/36186 Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-22mb/google/octopus: Override VBT selection for BloogletTony Huang
Share the same vbt_blooguard.bin to disalbe DRRS support. BUG=b:143045247 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooglet. Change-Id: Ia180f265080f801a09f10ce8a8b520c47f218775 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-21mb/google/glados: port to FSP 2.0Michael Niewöhner
This patch is part of the patch series to drop support for FSP 1.1 in soc/intel/skylake. The following modifications have been done to migrate the board(s) from FSP 1.1 to FSP 2.0: - remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0) - switch to using the FSP default VBT TODO: - testing Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-21mb/google/hatch/var/dratini: Add ELAN touchscreen supportWisley Chen
Add ELAN EKTH6915 USI touchsreen support. BUG=b:139392144 TEST=check touchscreen work, and confirmed power sequence with vendor. Change-Id: I8ebc067bbb407498de00ea0b6c23b0848023cffe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36125 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21google/poppy: add VBT for nautilus variantMatt DeVillier
Add data.vbt and modify Kconfig appropriately; allows use of FSP/GOP display init. VBT extracted from stock ChromeOS firmware. Change-Id: I8a2d093ad96f72fb420b94aafa790e3ba900d905 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-21mb/google/hatch/akemi: disable unused devices for AkemiPeichao Wang
Akemi unused devices declare: - I2C #1 gpio_keys - close I2C #3 - close GSPO #1 BUG=b:142800988 TEST=Reboot stress test and suspend stress test, the DUT will be able to working properly Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ibff1446ccb213abce1a2ae19718774d9d6737cc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36086 Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-18mb/google/octopus: Create Dood variantTim Chen
This commit creates a dood variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:141960652 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-18mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
The change applies the DPTF parameters. BUG=b:142849037 TEST=build and verified by thermal team Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-18mb/google: Shrink GBB section sizeHung-Te Lin
Chrome OS firmware images have moved bitmap resources from GBB into CBFS for a long time, so the GBB should only hold firmware keys and HWID, that is usually less than 10k. ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but many recent x86 simply copy from old settings and may run out of space when we want to add more resources, for example EC RO software sync. Note, changing the GBB section (inside RO) implies RO update, so this change *must not* be cherry-picked back to old firmware branches if some devices were already shipped. BRANCH=none BUG=None TEST=make # board=darllion,hatch,kahlee,octopus,sarien Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-16mb/google/hatch/akemi: Tune I2C bus 1 clockPeichao Wang
Tune I2C bus 1 clock and insure it meets I2C spec. BUG=b:142683257 TEST==flash coreboot to the DUT and measure I2C bus 1 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-16mb/google/hatch/var/dratini: Add enable pin for elan touchscreenWisley Chen
Add enable pin for elan touchscreen BUG=b:142710871 TEST=touchscreen work Change-Id: I09b6ffb962272bfe46e63b057be885b1bdf13554 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-16mb/google/hatch/var/dratini: update goodix power sequenceWisley Chen
Update power sequence to meet spec. BUG=b:142710867 TEST=touchscreen work, and make sure power sequence to meet spec with vendor. Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-16mb/google/drallion: Add new SPD file for drallionBora Guvendik
Add the SPD data for MT40A1G16KD-062E:E BUG=b:139397313 TEST=Compile successfully. Change-Id: I3d1ae9269ff3129845a7f53dbacbab6e1b66b6d5 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-16mb/google/octopus: Override VBT selection for BlooguardTony Huang
Disable DRRS on Blooguard SKU - 49, 50, 51, 52 BUG=b:142632381 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooguard. Cq-Depend: chrome-internal:1983227 Change-Id: I36a313fd2beacb878da7383f733e206067c1c0fb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-10-16sb/intel/bd82x6x/lpc: Set up default LPC decode rangesArthur Heymans
This sets up some common default LPC decode ranges in a common place. This may set up more decode ranges than needed but that typically does not hurt. Mainboards needing additional ranges can do so in the mainboard pch_enable_lpc hook. Change-Id: Ifeb5a862e56f415aa847d0118a33a31537ab8037 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-16intel/broadwell: Implement proper backlight PWM configNico Huber
Port the backlight-PWM handling from Skylake instead of the previously used Haswell version. We use a 200Hz PWM signal for all boards. Which is higher than the previous devicetree value, 183Hz, but that was over- ridden by the VBIOS anyway. 200Hz is still very low, considering LED backlights, but accurate values are unknown at this time. Lynx Point, the PCH for Haswell and Broadwell, is a transition point for the backlight-PWM config. On platforms with a PCH, we have: o Before Lynx Point: The CPU has no PWM pin and sends the PWM duty-cycle setting to the PCH. The PCH can choose to ignore that and use its own setting (BLM_PCH_OVERRIDE_ENABLE). We use the CPU setting on these platforms. o Lynx Point + Haswell: The CPU has an additional PWM pin but can be set up to send its setting to the PCH as before. The PCH can still choose to ignore that. We use the CPU setting with Haswell. o Lynx Point + Broadwell: The CPU can't send its setting to the PCH anymore. BLM_PCH_ OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is used (it virtually always is). We have to use the PCH setting in this case. o After Lynx Point: Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is implied and the bit not implemented anymore. Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
Helios adds TEMP_SENSOR4 to the EC ADC2 pin. Add this to the DPTF. BRANCH=None BUG=b:142266102 TEST=`emerge-hatch coreboot` Verify that Helios builds correctly. Change-Id: I3bc19f9b9bd644e134987749ad9a4d875ad8b40a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-15mb/google/hatch: set wifi sar for dragonairWisley Chen
Enable wifi sar feature and set wifi sar name for dragonair sku. BUG=b:142109545 TEST=emerge-hatch coreboot chromeos-bootimage 1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini 2. Add iwlwifi.debug into kernel params. 3. check SAR value from dmesg only when sku id is 21/22 Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-15mb/google/hatch: Initialize FPMCU_PCH_BOOT1Wisley Chen
FPMCU_PCH_BOOT1 pin is connected to GPP_C12. So, config GPP_C12. BUG=b:142188003 TEST=emerge-hatch coreboot Change-Id: I73a5c3529330ef3e72f4c7d5fcbbd2f6693494d8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35845 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-11mb/google/hatch: Add new touchscreen option for KohakuTim Wawrzynczak
The next board rev will have a new option for an Elan touchscreen. Add support for this in the devicetree, as well as use the 'probed' property on both touchscreen options. BUG=b:141957731 BRANCH=none TEST=compiles (next board rev not available yet) Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
Update GPIO_138 and GPIO_139 setting to fix EMR function. BUG=b:141729962,b:141281846 BRANCH=octopus TEST=verify EMR function in Grob360S. Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>