summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2017-09-26soraka: Ensure I2C5 frequency is less than 400kHzFurquan Shaikh
Update I2C5 bus parameters to obtain clock frequency <400kHz. BUG=b:65062416 TEST=Verified using an oscilloscope that I2C5 bus frequency in factory is ~397kHz. Change-Id: I3d0b0388343d4c6c5e7eabf3e06799d059307517 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-21google/celes: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/celes (Samsung Chromebook 3) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new celes variant - Add new trackpad I2C device to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-celes-7287.92.B, commit 9f0760a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Id52d3c523bae7745b3dc04da012ab65c1fb37887 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/banon: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/banon (Acer Chromebook 15 CB3-531) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new banon variant Sourced from Chromium branch firmware-strago-7287.B, commit 02dc8db: Banon: 2nd source DDR memory (Micro-MT52L256M32D1PF) Change-Id: If29e95deee88b79522547e16fc80c2d5378da7c7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21google/terra: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/terra (Asus Chromebook C202SA/C300SA) as a variant of the cyan Braswell baseboard. - Add board-specific code as the new terra variant - Add code to the baseboard to handle terra's unique thermal management - Add new shared SPD files to baseboard Sourced from Chromium branch firmware-terra-7287.154.B, commit 153f08a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Ib2682eda15a989f2ec20c78317561f5b6a97483a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-21mb/google/{poppy,soraka}: Enable LTR for Root portRizwan Qureshi
Enable LTR for Root port 0, where wifi card is connected. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: I222a87fe2094c8424760ccf578e32b9ac042f014 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajat Jain <rajatja@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20google/kahlee: Prevent AGESA memory clearMarc Jones
The Linux Pstore area must not be cleared on a reboot. Set the option to not clear the memory in AGESA. BUG=b:64193190 BRANCH=none TEST=Memory clear isn't called in AGESA. Change-Id: I9b8286ade718fa80bf3badd478ab9a7df643ab98 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21596 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20google/kahee: Fix number of memory channelsMarc Jones
Kahlee has a single memory channel, not two. This corrects DMI type 17 reporting and the memory clear functions. BUG=b:65403853, b:64193190 BRANCH=none TEST=AGESA DMI reports the correct number of DIMMs. Change-Id: Ic263d2677a480448beaf3850391b1a3d4ed38657 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-19AGESA binaryPI: Clean up amdfamXX.h includeKyösti Mälkki
Change-Id: Iba8b8d33e1f10e28745234988d97d4fafd04c798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-16mb/google/poppy: Add lens_focus property for OV13858 camera moduleV Sowmya
Add lens_focus property with reference to VCM device for OV13858 camera module to register the corresponding v4l2 sub-device asynchronously. BUG=b:64133998 BRANCH=none TEST=Build and boot soraka. Dump DSDT and verified that it has the required entries and verified the camera functionality. Change-Id: Ib22403f668dd07d6b9226fe2c22b533223b69473 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21512 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-16google/lulu,gandof: set kb backlight on bootMatt DeVillier
Set keyboard backlight to 75% on boot, except when resuming from S3. This enables the backlight at a reasonable level prior to the OS driver taking over, providing early proof-of-life and enhanced usability in grub etc. Uses same method as other google boards with a keyboard backlight (chell, link, samus). 75% value determined based on user feedback. TEST: boot google/lulu,gandof boards, observe keyboard backlight enabled in pre-OS environment. Change-Id: I7ed59289419af21764b1b5bd0a534d3b630c6c6b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/reks: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/reks (Lenovo Chromebook N22/N42) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new reks variant - Add new I2C touchscreen device and SPD files to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-reks-7287.133.B, commit 7d812d4: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Iac9e2b5661aa33e12927f4cb84ebaee36522a385 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/edgar: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/edgar (Acer Chromebook 14 CB3-431) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new edgar variant - Add common code to the baseboard which will apply to all variants other than cyan Sourced from Chromium branch firmware-edgar-7287.167.B, commit 2319742: Edgar: Add Micron MT52L256M32D1PF-107 SPD data Change-Id: I58548cbbc85828f37c0023e8aa9e09bdca612659 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-15mb/google/poppy: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. BUG=b:64798078 TEST="lspci" shows that AER is enabled in the capabilities list. Change-Id: I8a818a9539b8d4f103d551ffd59713c9bbbc13ce Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21425 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-15google/cyan: convert to variant configurationMatt DeVillier
Setup cyan to be the baseboard for other Google Braswell boards, to be added in subsequent commits: - Keep code common to all Google Braswell boards in the baseboard, and separate out the board-specific bits into the new cyan variant. - Define the I2C ACPI devices such that they can be easily reused for other variants. - Switch the trackpad/touchscreen interrupts from edge to level, for better performance/compatibility, as was done with all previous Google boards. - Add code to the baseboard to allow optional variant-specific parameters to be used for both memory and silicon init. - Remove superfluous includes, replace some hardcoded values with variables, and correct typos/formatting errors. Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mb/google/soraka: Update DPTF parametersWisley Chen
Cloned from baseboard/dptf.asl and update the parameters for soraka. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU: passive point:85, critial point:100 TSR0: passive point:55, critial point:65 TSR1: passive point:58, critial point:70 TSR2: passive point:60, critial point:75 TSR3: passive point:60, critial point:75 2. Set PL1 Max to 7W, and PL1 Min 4.5W 3. Change sampling period of thermal relationship table (TRT) setting CPU: 5 seconds TSR0: 30 seconds TSR1: 30 seconds TSR2: 8 seconds TSR3: 8 Seconds BUG=b:65467566 TEST=build, boot on soraka, and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6af93fa358a037df2088213ee4df5e2cfd047590 Reviewed-on: https://review.coreboot.org/21453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13mb/google/soraka: Fine-tune USB 2.0 port4Wisley Chen
Fine tune usb 2.0 strength for port 4 to pass eye diagram. BUG=b:65306272 TEST=build on soraka, measure usb2.0 eye diagram, and result is pass. Change-Id: I2c79e96e2e3dea1364d7b71af19b57f4c9307fcb Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13google/snappy: Update EC keyboard backlight flag by SKU IDKevin Chiu
Set AP SKU ID by ec command EC_CMD_SET_SKU_ID to update EC keyboard backlight flag. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I1153aa0b89250c55f311dd93a01fcef47afd7292 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-11kahlee: Add RO_VPD region in FMAPMarc Jones
The RO_VPD region is required for ChromeOS. BUG=b:65408869 TEST=Build and check coreboot.rom with fmap_decode. Change-Id: I9c475acc5e34a3a41f815990fb1f363963c7b9b9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06google/gru: Re-enable 3V rail GPIO on ScarletJulius Werner
We've decided to move control for the 3.0V rail (technically 3.3V on Scarlet, but who cares about millivolts) back to a GPIO on the AP for Scarlet rev2. This patch adds the necessary code to enable it and make ARM TF aware of its existence. Since the pin had previously not been connected to anything, we shouldn't really need to guard this by board ID... older Scarlets will just be twiddling an empty pin. Change-Id: I6037aa486b50119f2c7b859b966cadc3686e3459 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/21328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-09-06mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codecHarsha Priya
This patch adds imon and vmon slot numbers for Maxim 98927 driver. These values are used to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I4382da4f984507d147751c168e8177b58c88a70f Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-06mb/google/soraka: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. Change-Id: I76742801e84449d0910ddadf31d39597df3263b9 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-02mainboard/google/fizz: Enable support for DPTFTsai, Gaggery
This patch adds the DPTF settings specfic to the mainboard and enables the CPU and other thermal sensors as participant device for fizz. It also enables the DPTF flag in the device tree for fizz. BUG=b:64915426 BRANCH=None TEST=emerge-fizz coreboot and run DPTF observation tool to make sure DPTF is up and running. Change-Id: Ic7d125a763f539158aa425fbba1d8a000a3465ca Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-02mainboard/google/soraka: Remove wacom digitizerWisley Chen
We have no wacom digitizer on I2C#3, so remove it. TEST=build and boot on soraka. Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21309 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-31google/gru: Support Nefario rev0Philip Chen
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario. Also, remove DVS support for CENTERLOGIC. BUG=b:64702054, b:63537905 TEST=build coreboot Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/21176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30google/cyan: update SPD functionsMatt DeVillier
Update cyan's SPD-related functions to more closely mirror those of other Braswell boards, in order to simplify the upcoming baseboard/variant setup for Braswell ChromeOS boards. TEST: boot google/cyan, observe SPD correctly identified in cbmem log, RAM-related data correct in SMBIOS tables. Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-30mb/google/eve: rt5514: Add 16ms delay on dmic initDuncan Laurie
Add a 16ms delay to DMIC init by the kernel driver in order to prevent an audible 'pop' noise when starting to record. BUG=b:63413023 TEST=manual testing to ensure this device property is present in SSDT: Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "realtek,dmic-init-delay", 0x10 } } }) Change-Id: If9160ce6992153ba49719029de336595bbf4ae72 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-28google/Bruce: Add Raydium touch screen supportSheng-Liang Pan
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 375 - 400 I2C1: 377 - 400 I2C2: 377 - 400 I2C4: 375 - 397 I2C5: 375 - 397 Change-Id: Ie30e1a12b66c4660b648a585c4dfd66faf004129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-25google/beltino: fix LED polarity for mccloud variantMatt DeVillier
The LED polarity was set incorrectly, fix using values derived from original Chromium sources: branch firmware-mccloud-5827.B, ToT src/mainboard/google/mccloud/smihandler.c src/mainboard/google/mccloud/romstage.c TEST: boot google/mccloud, observe power LED on normally, blinking in S3/S4, and off in S5. Change-Id: Ia1f63eebbccb48fcf8543188db390b23045d843e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-25google/cyan: Increase RO coreboot size on flashMatt DeVillier
Commit 05627831826cab096789bd19f004b33a4cd70c0e applied this change to other Google boards, but cyan was left out. Bring cyan in line with other Google boards. Change-Id: Id86bea538a7b82367ea6ddbd3fe3efb1b1c0078d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-25google/cyan: Remove support for pre-EVT boardMatt DeVillier
Cleaning up code to remove support for pre-EVT rev of cyan board. Analogous to what was done for intel/strago in commit 103f00d. Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Use GpioInt for Keyboard IRQJagadish Krishnamoorthy
Cherry-pick from Chromium commit a162348. Remove the hard coded IRQ number for the keyboard interrupt. IRQ number can change based upon the gpio bank index ordering. Hence pass the gpio bank and index number so that kernel calculates the IRQ number. Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable L1 sub stateT.H. Lin
Adapted from Chromium commit dc59188. Disable L1 sub state to prevent WiFi randomly disappear condition. Original-Change-Id: I8975bb4bbbc2fc89b91b06ae02716367890c672d Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Rajat Jain <rajatja@chromium.org> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Oriignal-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Change-Id: I51a1bcca6431e6bc28baf9b09433cec13db925c3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory 2-channel 4G (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 7f0cdf0. Cyan board add 4G DDR3L 2nd source memory (Micro/Samsung) Original-Change-Id: I12f82082d8227e61a97ce0a001d7d2b1f6613e06 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ieca7201346414d7a962f9619dbe846c67c0f02d6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Add 2nd source memory (Micro/Samsung)T.H. Lin
Cherry-pick from Chromium commit 3b578ef. Cyan board use new 2nd source memory (Micro/Samsung) Original-Change-Id: I6f4e8438faede7ac742776a622c265922e498898 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Change-Id: Ie2febe4de57c00c269def15d57f2b5a6f0f378aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Fix Touchscreen InterruptJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1138727. Elan touchscreen driver expects the first gpio resource in asl to be the reset line. The driver considers the gpio based irq line as reset gpio resource and changes the direction to output. This will cause irq registration to fail. Solution is to pass Interrupt resource for touchscreen irq instead of GpioInt. Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Enable CA MirrorShobhit Srivastava
Cherry-pick from Chromium commit e49deb1. Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is board specific. Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
Cherry-pick from Chromium commit 1940eb6. The unused lines leads to spurious interrupts on few of the systems. Original-Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Tested-by: Bernie Thompson <bhthompson@chromium.org> Change-Id: I6f4f7cec8ef11e781c66b6efff4188259469e41c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Clean-up the devicetreeRavi Sarawadi
Cherry-pick from Chromium 2b51633. Disable unused PCI devices. Update PCI DeviceID. Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25google/cyan: Support reading Memory strap GPIOs to select SPDSubrata Banik
Cherry-pick from Chromium commit 8f63720. SoC GPIO to read Memory strap not getting configured correctly causing incorrect RAMID read during ROMSTAGE TEST=Build and boot the platform with differnt Memory type and read RAMID correctly inside spd.c RAMID = 0 => 4GB Samsung Memory RAMID = 1 => 4GB Hynix Memory RAMID = 2 => 2GB Samsung Memory RAMID = 3 => 2GB Hynix Memory Original-Change-Id: Ide9d4b5f73565cddd74cedf7afe4b7d168dde74c Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: If2ba9ec5be111b9c30360ffde41a2c644a69ecae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25mainboard/google/coral: Add USB2 phy setting override for SantaTim Chen
In order to pass type C USB2 eye diagram for sku Santa, USB2 port#1 PHY register needs to be overridden. port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I07c0b7b0f08263a348befb7d6fd8d01028314470 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-24mb/google/coral: Copy devicetree.cb from baseboardTim Chen
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I5db730c1974a96547fe7fda63689b7c5bfaefc66 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/amd/stoneyridge ACPI: Sync sleepstates.asl definitionsKyösti Mälkki
Sync file with southbridge/amd/common/sleepstates.asl. SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Change-Id: I674953f1a5add74e16ddd84c252e8d21501ffefd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22google/kahlee: Enable ALS connected to ECAkshu Agrawal
Kahlee has an ambient light sensor connected to the EC. TEST=Can see the device in /sys/bus/iio BUG=b:62030268 Change-Id: Id1138a0fc5270489a734bdf8b1f4ac02d358c0df Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/21146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22mainboard/google/coral: Overwrite family code for coral models.Harry Pan
This patch assigns the code of coral family, such that, the 'mosys platform family' returns 'Google_Coral'. BUG=b:64467244, b:64501879 BRANCH=none TEST=Examine 'mosys platform family' w/ new firmware. Change-Id: I1d8f8ca2166a1d80855608cf5b64b0cc7bf3dc93 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/21136 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21google/snappy: Add Raydium touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64821783 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8852e38f01f82b80c2c9718b93baf5894dbd745b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-21google/snappy: Add MELFAS touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize MELFAS touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64779224 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: If2bc910d641e0cf2b120ed883c5788542959f568 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21mainboard/google/poppy: Update VR config settingsFurquan Shaikh
Update Psi2Threshold, IccMax, ACLoadline and DCLoadline VR config settings to match that of soraka. BUG=b:62063434 BRANCH=None TEST=Build and boot poppy. Change-Id: I2c294eb14257d319e1e2d4d1e529481d921ba6f8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21105 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-21mainboard/google/poppy: Remove MPS IMPV8 workaroundFurquan Shaikh
Poppy uses MPS2949 IMVP8 controller and does not need the VR workaround similar to Eve. Change-Id: If6fb1890e024e1488d278bbe0a71a1a63ee321af Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21104 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-17mainboard/google/poppy: Add ACPI objects for NVMEM device GT24C16S and CAT24C16V Sowmya
The Giantec semiconductor GT24C16S and ON semiconductor CAT24C16 are the industrial standard electrically erasable programmable read only memory (EEPROM's) and this patch adds ACPI objects and power resources for NVMEM device. Update DOVD method to set sensor IO LDO voltage and remove repetitive code from OVFI, VCMP and NVMP power resources. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Read the NVMEM content via sysfs interface. Change-Id: If49ed33b7e1de1eabf317b31ceed8568dfca0aae Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-17mainboard/google/coral: Add keyboard backlight supportSheng-Liang Pan
BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I777247a6b58d3d50b72f12ca2fcab49a06ed5431 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-15google/coral: Fetch SKU ID from ECPatrick Georgi
BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I96a0e030bbc5f1c98165e70353340c413f8dc352 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
Add LPC common code to be shared across Intel platforms. Also add LPC library functions to be shared across platforms. Use common LPC code for Apollo Lake soc. Update existing Apollolake mainboard variants {google,intel,siemens} to use new common LPC header file. Change-Id: I6ac2e9c195b9ecda97415890cc615f4efb04a27a Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-11mb/google/poppy: Update PL2 settingsSumeet Pawnikar
Update PL2 override setting to 15W as per KBL Power Arch Guide. Change-Id: I4a6f875f8c3bdb012d6ff97c1429f32db5210893 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/20943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10google/kahlee: Set eMMC slotMarc Jones
Set AGESA SD/eMMc variable to non-removable eMMc. BUG=b:63891719 BRANCH=none TEST=Boot eMMC on Kahlee. Change-Id: I76ed9cec36a9688ebe75db2077f1ece4ab750c16 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-09intel/common/block/smm: Update smihandler to handle gpiBrandon Breitenstein
Updating the common smihandler to handler gpi events which originally were going to be left to each soc to handle. After some more analysis the gpi handler can also be commonized. Change-Id: I6273fe846587137938bbcffa3a92736b91982574 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/20917 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
some gpio irq need to set input pull initialization status to guarantee to get the right irq trigger. let's add this argument in gpio_input_irq() function BRANCH=None BUG=None TEST=boot from bob Change-Id: I9b8e6497f07146dafdb447a6ea10d039a2a2fa33 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-04mainboard/google/poppy: Decrease link-frequencies for OV13858 and OV5670V Sowmya
Decrease the link-frequencies as recommended by Omnivision for OV13858 and OV5670 camera sensors. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I78fb2d3527f66b5147123a9c8fc4cb95650f86b6 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2017-08-04mainboard/google/soraka: Configure GPP_B8 in bootblockFurquan Shaikh
GPP_B8 acts as input to the inverter whose output controls PERST# signal to wifi module. Out of reset, GPP_B8 is configured as input by default. Since there is no external pull-down on it, this line is floating and results in PERST# being asserted until ramstage where the GPIO was originally configured. Because of this the wifi chip is not ready during the PCIe initialization step. Move the configuration of GPP_B8 to bootblock so that wifi device is taken out of reset as early as possible. BUG=b:64181150,b:62726961 TEST=Verified with warm reboot and suspend-resume stress test that wifi is still functional. Change-Id: I68e1bd67499262a17daade72e9a9fd32934a184d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04mainboard/google/soraka: Add gpio.c to bootblockFurquan Shaikh
Add gpio.c to bootblock so that the variant early_gpio_table can be used for configuration in bootblock. BUG=b:64181150,b:62726961 Change-Id: I77181334257f2fd19982ecafc1f58afe912f4280 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04google/kahlee: Add ChromeOS SMBIOS Board IDMarc Jones
Kahlee uses 3 GPIO(144, 140, 135) pins to identify the board revision. Change-Id: Ia9693db6d6506af7ff40db0b3ce4cc6c1469f6ef Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04soc/amd/stoneyridge: Use generic gpio libraryMarc Jones
Use the genric GPIO library. Add the required functions. Also, update the Kahlee mainboard dependency to match. Change-Id: I2ea562b052401efff3101f736788ca77d21e6de6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20543 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-03google/kahlee: Add Realtek audio codec ASLIvy Jian
Add the RT5650 codec ASL for proper Linux driver loading. Devices visible to OS: /sys/bus/acpi/devices/AMDI1002:00 /sys/bus/acpi/devices/I2SC1002:00 Change-Id: I60b256f68372c9d17d67c9cb2accaca616a0b9a5 Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-01google/gru: Correct Scarlet pwm regulator minimum value and maximum valueLin Huang
In Scarlet pwm regulatoror minimum value and maximum value differs from other board variants, Correct it so we can get the right voltage. Change-Id: I1f722eabb697b3438d9f4aa29c205b0161eb442a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-01google/gru: Correct the Sdcard control gpio setting for ScarletLin Huang
in Scarlet the Sdcard control gpio differs from other board variants, So set the GPIO to high on Scarlet. Change-Id: I5fa19b212a716213462eea58b6242392d32a2c5c Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-01google/gru: Use 1.8V powerdomain for gpio4cd on ScarletLin Huang
Scarlet gpio4cd use 1.8V powerdomain, let's make a correct register setting, otherwise even the uart does not work. Change-Id: Ib5a8b2a4d92502fb829688d0a3e1b645d53cd7fc Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-31google/kahlee: Add mainboard GPIOs to ACPIMarc Jones
Add the Google mainboard GPIOs to the ACPI table. Change-Id: I9b5952ed3934b938cb50650890a7b434e6306fd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Fix CTRL+U USB bootMarc Jones
The EC KBC controller was not initialized, so the EC wouldn't put keys in the output buffer. With nothing in the buffer, vboot didn't try to boot the USB stick. Add the driver to setup the KBC called by EC init. BUG=b:62066405 BRANCH=none TEST=Boot Kahlee with USB stick and CTRL+U boots the stick. Change-Id: If9346fda558e802536c7de38da5b21fd25320e40 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20480 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Move mainboard_ec_init to chip init phaseMarc Jones
Move mainboard_ec_init out of mainboard enable to the more appropriate mainboard init phase. Change-Id: Ieabcecf70e4de0b42fc639d031755b6d0b66f08a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
Move the mainboard MADT tables to generic soc ACPI code. Change-Id: I49fb55b1315da8fe65421b43fc4312ed588d5ecb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20277 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Add EC and GNVS ACPIMarc Jones
Add ACPI support for the Google EC, which requires GNVS support for passing information from the EC to firmware and OS. Change-Id: I0a308bcd608a135cc9633273a05527f020b60743 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Enable TPMMarc Jones
Set up the TPM decode to SPI prior to verstage. Enable LPC TPM and remove the mock data. Note, Kahlee TPM is on SPI, but decoded by the LPC block. BRANCH=none BUG=b:62103024 TEST=coreboot and Depthcharge reports TPM found. Change-Id: Iab92259ebeaa40937309fad05cc45d9ca6d41357 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Save VBNV data to CMOSMarc Jones
Store VBOOT NV data in CMOS. This allows VBOOT to save flags and data to be used in multiple stages and depthcharge. Fixes developer mode USB boot. Change-Id: I50b45e687a1a1c71838bcc390212b28d7e634a19 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
Set DDI port 2 type to Display Port. Change-Id: Idc5e57e01d4f0073ac50533c1b04a95bcae67473 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
Inform AGESA to setup an I2S codec instead of an Azalia codec. This is step one for audio to work. ASL to connect the driver and the hardware is in a follow-on patch. Change-Id: I7ece5d8c317ddc76e0e6b2a005256bc384fe51e2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/19841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
All affected boards did the same USE_NATIVE_RAMINIT distinction or actually selected USE_NATIVE_RAMINIT. Also update autoport. Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20813 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-07-28google/kahlee: Add ASL for Elan touchpadIvy Jian
Add ASL for the Elan touchpad driver connection in ChromeOS. This is based on the Auron and Rambi ASL. The AMD ACPI code doesn't have the auto table generation the newer Intel Chrome SOC use. Device visible to OS: /sys/bus/acpi/devices/ELAN0000 Change-Id: Id3fc8c8855b0296f43a502e81143498d663468ec Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Fix ASL whitespace and formattingMarc Jones
Clean up the ASL whitespace and formatting to match the iasl -d style as other parts of coreboot. Change-Id: I61689cb55dc26cbad160d45aa0a36c00b386fe0c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Remove conflicting AAHB IRQ ASLIvy Jian
The AMD internal A-link (AAHB device) doesn't support an IRQ, so remove it. This solves a conflict with the GPIO IRQ required for touchpad operation. Change-Id: Iefaf33cfb2babc29d35b5372fc3a338a72c78a4a Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
WLAN_PE_RST control was moved from EC to SoC, it connected to GPP_B8. Configure GPP_B8 to drive low. TEST=Wifi card is detected and connect to an AP. Change-Id: I6a6ea0ddefe8402284fe37665864c7a1961cbc15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27google/kahlee: Set SERIRQ to continuous modeMarc Jones
The Kahlee Nuvoton EC firmware doesn't support SERIRQ quiet mode, yet. Set continuous mode until the quiet mode feature is available. This allows keyboard and other EC based interrupts through. Change-Id: If77c91fde2bd0f4da85413879fefb753ae6297de Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19840 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
GPIOs for I2C3 were being unset in amdinitmid if the GPIO enable table wasn't passed. It had been initialy set in amdinitreset. Pull the GPIO settings into their own file that can be used in bootblock and later stages. Change-Id: I41cd7873f8c8543c95ad8653e0a3887f7d0487a2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
Enable: GPP0 x1 - WLan GPP1 x1 - Card Reader Change-Id: Idbfc2a3260b85949810bdd8dc904e59f8a779e48 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Set FADT legacy and 8042 supportedMarc Jones
The EC is a legacy 8042 device. Don't set LEGACY_FREE and correctly report in the FADT. Change-Id: I041ea4b44372178f3d6073b6ebc8003abc097703 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19836 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Add ChromeOS and ChromeECMarshall Dawson
Add the basics for building as a ChromeOS device. ChromeOS and ChromeEC are dependent on each other, so bring them in together. The EC is a Nuvoton and you can find additional details in the Chromium EC repo. Add the Google HWID "Kahlee TEST 6421". The chromeos.fmd for Kahlee takes advantage of the AGESA located outside cbfs and includes typical RW, VPD, and MRC areas. There are some updates required to depthcharge, vboot, GPIOs, and the ChromeEC before we have a complete-ish system. Change-Id: Ifb0a6afc01dd80ef9e7bb81039d9152936043999 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update GPIO tableMarshall Dawson
Update GPIO settings based on the schematic. Change-Id: Ic8a876198a3ba9029d1aabb273418923e40bfcc6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27google/kahlee: Update for single DIMMMarshall Dawson
Update for a single DIMM with an SPD at address A0. Change-Id: I646f079c99cbaffd7094773243600c3030308325 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19833 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Remove AMD IMCMarshall Dawson
Kahlee does not use the AMD IMC. Remove the files and calls. Change-Id: Ia837551b592b4f473eb38c06c516586fb6c95c88 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19832 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Update KconfigMarc Jones
Update for the Stoney Ridge FT4 package and the on chip UART. Change-Id: I11468834a9ef03da084c156c74d55a19416d98c4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19831 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Start Kahlee mainboardMarc Jones
Copied from amd/gardenia. Update the appropriate board name strings. Uses the soc/ structure. Change-Id: Ia68b16969518f4d63d5d2dea7658a472b2daca05 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27mainboard/google/poppy: Configure GPIO.1 and GPIO.2 for daisy chain modeV Sowmya
Configure GPIO.1 and GPIO.2 as sensor SDA and SCL respectively for TPS68470 PMIC in daisy chain mode. * GPIO.1: Sensor SDA in daisy chain mode. * GPIO.2: Sensor SCL in daisy chain mode. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I7f9686427772a33c06e4cdaafee9b0349d700639 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-24google/reef: Configure EN_PP3300_DX_LTE on coralPatrick Georgi
BUG=b:63876329 BRANCH=none TEST=none Change-Id: I98c700d5b928c031129cf0138d22652a28d1ad1d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>