index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
gitea
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
Age
Commit message (
Expand
)
Author
2015-04-07
exynos5420: Change all SoC headers to <soc/headername.h> system
Julius Werner
2015-04-07
exynos5250: Change all SoC headers to <soc/headername.h> system
Julius Werner
2015-04-07
broadwell: Change all SoC headers to <soc/headername.h> system
Julius Werner
2015-04-07
baytrail: Change all SoC headers to <soc/headername.h> system
Julius Werner
2015-04-06
New mechanism to define SRAM/memory map with automatic bounds checking
Julius Werner
2015-04-04
rk3288: set cpu frequency up to 1.8GHz
huang lin
2015-04-04
veyron_pinky/rk3288: Use KHz, MHz and GHz constants
Julius Werner
2015-04-04
samus: Disable USB Port 5
Duncan Laurie
2015-04-04
samus: Add new memory type
Duncan Laurie
2015-04-04
samus: Set codec PDM clock output to 3MHz
Ben Zhang
2015-04-04
samus: Change touchscreen bootloader mode i2c address
Duncan Laurie
2015-04-04
samus: Enable GSPI0 interface
Duncan Laurie
2015-04-04
samus: Enable GPIO9 as touchpad wake
Duncan Laurie
2015-04-04
samus: Update thermal max for broadwell
Duncan Laurie
2015-04-04
samus: Assign GPIO2 to HP_AMP_SHDN_L
Ben Zhang
2015-04-04
samus: Make codec interrupt active high
Ben Zhang
2015-04-04
samus: Add codec platform data for jack detect
Ben Zhang
2015-04-04
samus: Change GPIO controller label to INT3437:00
Duncan Laurie
2015-04-04
samus: Enable update screen for software sync
Duncan Laurie
2015-04-04
samus: Add smbios_mainboard_version to define board version
Duncan Laurie
2015-04-04
samus: Add codec platform info in ACPI
Duncan Laurie
2015-04-04
Drop (empty) google/snow mainboard directory
Stefan Reinauer
2015-04-04
rk3288: Pass SPI bus speed in as parameter to init function
David Hendricks
2015-04-02
pinky: Move some init to mainboard bootblock
David Hendricks
2015-04-02
rk3288/pinky: Move uart address to mainboard Kconfig
David Hendricks
2015-04-02
Nyans: replace cpu_reset with hard_reset
Daisuke Nojiri
2015-04-02
urara: Configure UART line control to 8N1
Ionela Voinescu
2015-04-02
coreboot: rk3288: add new ddr config and support ddr3 freq up to 800mhz
jinkun.hong
2015-04-02
rockchip: support pwm regulator
huang lin
2015-04-02
rockchip: support i2c clock setting
huang lin
2015-04-02
pinky: Force delay for EC SPI transfers
David Hendricks
2015-04-02
veyron_pinky: Add rev2 support, clean up mainboard.c
Julius Werner
2015-04-02
veyron: select rw romstage using vboot2
Daisuke Nojiri
2015-04-02
samus: Fix codec interrupt and add GPIO defines
Duncan Laurie
2015-04-02
samus: Clean up touch wake sources
Duncan Laurie
2015-04-02
samus: Fix and clean up GPIOs and EC info/events
Duncan Laurie
2015-04-02
samus: Ensure PD controller is in RO mode for recovery
Duncan Laurie
2015-04-02
Samus: fix unused GPIO pin
Kenji Chen
2015-04-02
pinky: Enable EC_SOFTWARE_SYNC
David Hendricks
2015-04-01
mainboards: fix spd generation
Aaron Durbin
2015-04-01
cbfs: correct types used for accessing files
Aaron Durbin
2015-03-31
cbfs: remove cbfs_core.h includes
Aaron Durbin
2015-03-30
google/veyron_pinky: Don't auto select CHROMEOS
Aaron Durbin
2015-03-30
google/nyan_blaze: Don't auto select CHROMEOS
Aaron Durbin
2015-03-30
Update hex values to CBFS binary name types in Makefiles
Martin Roth
2015-03-28
storm: fix SW_RESET signal polarity
Vadim Bendebury
2015-03-28
storm: deassert SW_RESET signal at startup
Vadim Bendebury
2015-03-28
storm: make sure board ID is calculated only once
Vadim Bendebury
2015-03-28
storm: reset TPM properly on proto0
Vadim Bendebury
2015-03-28
storm: supply vboot GPIO settings in coreboot table
Vadim Bendebury
2015-03-28
blaze: update EMC BCT table
Neil Chen
2015-03-28
ryu: Add padconfigs for volup and voldown buttons
Furquan Shaikh
2015-03-28
rush: ryu: remove mainboard_add_memory_ranges()
Aaron Durbin
2015-03-28
tegra132/rush/ryu: Use CLK_RST_REG instead of &clk_rst->...
Furquan Shaikh
2015-03-28
Ryu: Move I2C6 init to ramstage
Tom Warren
2015-03-28
Ryu: Rewrite I2C6 mux init
Tom Warren
2015-03-28
rush: use generic spin table support
Aaron Durbin
2015-03-28
ryu: use generic spin table
Aaron Durbin
2015-03-28
rush: Get rid of coreboot setting up DMA areas for libpayload
Furquan Shaikh
2015-03-28
ryu: Get rid of coreboot setting up DMA areas for libpayload
Furquan Shaikh
2015-03-28
rush: Add cpu devices to devicetree
Tom Warren
2015-03-28
ryu: remove bring_up_secondary_cpu from devicetree
Aaron Durbin
2015-03-27
rk3288: Add GPIO() macro
Julius Werner
2015-03-27
pinky: Add mainboard-specific bootblock init
David Hendricks
2015-03-27
urara: use proper SOC name
Vadim Bendebury
2015-03-27
urara: introduce board skeleton
Vadim Bendebury
2015-03-27
ryu: add cpus to device tree
Aaron Durbin
2015-03-27
ryu: remove call to soc_configure_i2c6pad()
Aaron Durbin
2015-03-27
ryu: Remove old/unused BCT cfg files
Tom Warren
2015-03-27
ryu: fix power button polarity
Aaron Durbin
2015-03-27
rush: use names for gpios
Aaron Durbin
2015-03-27
ryu: configure plld for display usage
Aaron Durbin
2015-03-27
ryu: bring up secondary core
Aaron Durbin
2015-03-27
ryu: normalize board id
Aaron Durbin
2015-03-27
ryu: initialize LTE modem
Ben Chan
2015-03-27
ryu: use named bus numbers instead of literals
Aaron Durbin
2015-03-27
ryu: Add pad/funit init for i2c6 (audio codec, etc.)
Tom Warren
2015-03-27
samus: Update SPD with correct geometry and timings
Duncan Laurie
2015-03-27
samus: Add PD MCU ACPI device and unmask host event
Shawn Nematbakhsh
2015-03-27
samus: Updates for EVT board
Duncan Laurie
2015-03-27
samus: Switch to using broadwell platform ASL
Duncan Laurie
2015-03-27
samus: Enable WLAN wake GPIO in _PRW
Duncan Laurie
2015-03-27
samus: Fix some SPD geometry again
Duncan Laurie
2015-03-27
samus: Disable CMDPWR on broadwell
Kane Chen
2015-03-27
samus: Update SPD
Duncan Laurie
2015-03-26
rush: Remove CHROMEOS default
Patrick Georgi
2015-03-26
ryu: enable external usb 2.0 port
Aaron Durbin
2015-03-26
rush: Add usb support for rush in coreboot
Furquan Shaikh
2015-03-26
ryu: convert hardware initialization to funit API
Aaron Durbin
2015-03-26
rush: support for DMA region
Furquan Shaikh
2015-03-26
tegra: Clean up USB code
Furquan Shaikh
2015-03-26
ryu: support for DMA region
Aaron Durbin
2015-03-26
rush: Convert rush initialization to use funitcfg api
Furquan Shaikh
2015-03-26
t132: ryu: Correct how board id is retrieved
Jimmy Zhang
2015-03-26
fix how to interpret board id read from gpios
Daisuke Nojiri
2015-03-26
Restore name of the function reading tertiary GPIO states
Vadim Bendebury
2015-03-26
ryu: Update BCT to Max Frequency 924MHz
Jimmy Zhang
2015-03-26
ryu: convert mainboard initialization to use padconfig API
Aaron Durbin
2015-03-26
tegra132: move common bootblock init into SoC code
Aaron Durbin
2015-03-26
ryu: configure EC I2C pads as open drain
Aaron Durbin
[next]