index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
gitea
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
Age
Commit message (
Expand
)
Author
2015-01-09
storm: Increase DRAM size to 1024MB
David Hendricks
2015-01-09
storm: USB fixes for proto0
Vadim Bendebury
2015-01-06
mainboard/*/romstage.c: Sanitize system header inclusions
Edward O'Callaghan
2015-01-04
ipq806x: Add USB support
Julius Werner
2015-01-04
nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.
Tom Warren
2015-01-04
nyan: Ignore the recovery GPIO.
Todd Broch
2015-01-04
samus: Minor fixes for P1.9 boards
Duncan Laurie
2015-01-04
samus: Enable DDI2 hotplug
Duncan Laurie
2015-01-04
samus: Update for board revision 1.9
Duncan Laurie
2015-01-04
samus: Move SPD related information to spd directory
Duncan Laurie
2015-01-03
mainboard/storm: setup mmu in storm mainboard_init
Deepa Dinamani
2015-01-03
storm: enable early console
Vadim Bendebury
2015-01-03
storm/ipq8064: add dynamic CBMEM support
Vadim Bendebury
2015-01-03
blaze: change ramcode 1000/1001/1010 to use 792MHz bct
Neil Chen
2015-01-03
storm: ipq8064: enable CBFS SPI wrapper
Vadim Bendebury
2014-12-31
samus: Combine mainboard patches to build soc/intel/broadwell
Duncan Laurie
2014-12-31
ipq8064/storm: UART enable and various fixes
Vadim Bendebury
2014-12-31
nyan*: Set GEN2 I2C pads to open-drain mode
Ken Chang
2014-12-31
rambi: Add _PRW for LID0 ACPI Device
Shawn Nematbakhsh
2014-12-31
rambi: Unconditionally clear the EC recovery request
Sheng-Liang Song
2014-12-30
Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitch
Kein Yuan
2014-12-30
nyan_blaze: Enable USB port2
Neil Chen
2014-12-30
nyan*: Log boot reason in eventlog
David Hendricks
2014-12-30
ipq8064: prepare uart driver for use in coreboot
Vadim Bendebury
2014-12-26
blaze: change ramcode 0001/0010 to use 792MHz bct
Jerry Wang
2014-12-26
nyan*: Detect watchdog resets and reset the whole machine.
Gabe Black
2014-12-26
blaze: change ramcode 0000 to use 792MHz bct
Ken Chang
2014-12-26
nyan*: I2C: Implement bus clear when 'ARB_LOST' error occurs
Tom Warren
2014-12-19
nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.
Hung-Te Lin
2014-12-19
nyan*: Disable SD card reader power gpio.
Hung-Te Lin
2014-12-19
nyan*: Add fast link training functions
Jimmy Zhang
2014-12-17
rambi: align gpu pipea settings with the VBIOS
Aaron Durbin
2014-12-17
nyan*: cbmem: Move the call to cbmemc_reinit.
Gabe Black
2014-12-17
tegra124: modify panel init sequence
Ken Chang
2014-12-17
nyan*: enable CLAMP_INPUTS
Ken Chang
2014-12-17
nyan*: Add eventlog support
David Hendricks
2014-12-16
blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204
Neil Chen
2014-12-16
i2c: Replace the i2c API.
Gabe Black
2014-12-15
tegra124: Setup clock PLLD by approximating display panel pixel clock.
Hung-Te Lin
2014-12-15
nyan*: pinmux: fix PWM1/2 conflicts
Tom Warren
2014-12-15
tegra124: set safe values for href_to_sync and vref_to_sync
Jimmy Zhang
2014-12-15
nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.
Gabe Black
2014-12-15
nyans: prepare for vboot verification of ramstage
Aaron Durbin
2014-12-15
blaze: Change RAMCODE 0010 to hynix-2GB-792MHz
Neil Chen
2014-12-15
nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.
Neil Chen
2014-12-15
blaze: set 8 default BCT as hynix-2GB-204MHz
Neil Chen
2014-12-15
nyan*: Reduce the EC SPI bus frequency to 3 MHz.
Gabe Black
2014-12-09
spi: Factor EC protocol details out of the SPI drivers.
Gabe Black
2014-12-07
mainboard/google/samus: Fix usage of GNU field designator ext
Edward O'Callaghan
2014-12-06
Remove IRQ_SLOT_COUNT on all boards without PIRQ table.
Vladimir Serbinenko
2014-12-01
Mark non-executable files non-executable
Patrick Georgi
2014-11-30
Replace hlt() loops with halt()
Patrick Georgi
2014-11-26
sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.
Vladimir Serbinenko
2014-11-25
google/butterfly: fix off-by-one issues
Patrick Georgi
2014-11-23
sandy/ivy/nehalem: Remerge interrupt handling
Vladimir Serbinenko
2014-11-14
Big, Blaze: Set I2S1 Source to CLK_M to Fix Beep
Daisuke Nojiri
2014-11-14
nyan: tpm: Increase the TPM frequency to 400 KHz.
Gabe Black
2014-11-14
Nyan: Set I2S1 Source to CLK_M
Daisuke Nojiri
2014-11-14
nyan: Move some pinmux and clock/reset configuration to ROM stage.
Gabe Black
2014-11-14
t124: Clean up display init functions
Jimmy Zhang
2014-11-14
blaze: Create a nyan_blaze mainboard, copied from nyan_big
Tom Warren
2014-11-13
nyan*: Switching unused pin to GPIO
Neil Chen
2014-11-13
nyan: big: Only delay when and as long as necessary in the PMIC setup code.
Gabe Black
2014-11-13
nyan: big: Set the i2c controller frequencies appropriately.
Gabe Black
2014-11-13
Nyan: Set DMA Reserve to 2MB
Daisuke Nojiri
2014-11-13
nyan: Select the CD570M Tegra124 model.
Gabe Black
2014-11-13
nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GB
Tom Warren
2014-11-13
nyan: nyan_big: Mark the address range covering the SRAM as cachable.
Gabe Black
2014-11-13
nyan: Add 4GB bct support
Jimmy Zhang
2014-11-13
nyan: big: Check dram_end when setting up caching in ROM stage.
Gabe Black
2014-11-12
Copy u-boot sources as is and modify the tree to still build
Vadim Bendebury
2014-11-12
Include IPQ8064 SBLs code in the coreboot bootblock
Vadim Bendebury
2014-11-12
tegra124: Program PWM1 to drive panel backlight
Andrew Chew
2014-11-12
tegra124: Port a PWM clocking change to big.
Gabe Black
2014-11-12
tegra124: Enable PWM clock, and set up PWM1 pin
Andrew Chew
2014-11-12
tegra124: nyan: Keep in memory structures below 4GB.
Gabe Black
2014-11-12
nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.
Gabe Black
2014-11-10
arm: Redesign, clarify and clean up cache related code
Julius Werner
2014-11-09
src: Too many terminators ';;' at end of stmts, stop Skynet
Edward O'Callaghan
2014-11-08
bd82x6x: Move to common FADT.
Vladimir Serbinenko
2014-10-28
mainboard/google/butterfly: Fix usage of GNU field designator ext
Edward O'Callaghan
2014-10-28
mainboard/google/stout: Fix usage of GNU field designator ext
Edward O'Callaghan
2014-10-28
rambi: switch MCLK from 19.2Mhz to 25Mhz
Kein Yuan
2014-10-28
baytrail: Remove unused devicetree fields
Shawn Nematbakhsh
2014-10-28
rambi: always show dev/rec screens on eDP connected panel
Kein Yuan
2014-10-22
tegra/nyan*: sdram updates
Tom Warren
2014-10-22
baytrail/rambi: S3 support and other updates
Kein Yuan
2014-10-18
lynxpoint: Consolidate common GNVS init
Vladimir Serbinenko
2014-10-17
bd82x6x: Consolidate common GNVS init
Vladimir Serbinenko
2014-10-17
Add board_info for all Google/Intel boards mitting the file
Stefan Reinauer
2014-10-16
smbios: Mark laptops as such
Vladimir Serbinenko
2014-10-16
bd82x6x: Move common bd82x6x S3 detect to bd82x6x code.
Vladimir Serbinenko
2014-10-16
sandybridge: Move common northbridge finalize to northbridge code.
Vladimir Serbinenko
2014-10-01
storm: Add generic support skeleton for storm
Furquan Shaikh
2014-09-29
google/panther: add board_info.txt
Matt DeVillier
2014-09-29
google/panther: Be safe about invalid thermal readings
Stefan Reinauer
2014-09-25
Peppy/Falco: always use native graphics
Ronald G. Minnich
2014-09-25
snow: Rename snow to daisy.
Gabe Black
2014-09-25
peppy and falco: set panel power timings in northbridge, using devicetree, no...
Ronald G. Minnich
2014-09-25
pit: Rename pit to peach_pit.
Gabe Black
[next]