summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork
AgeCommit message (Expand)Author
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
2020-08-03mb/google/zork: Pass oscout system clk to rt5682Akshu Agrawal
2020-08-03mb/google/zork: Add Samsung K4AAG165WA-BCTD SPDKevin Chiu
2020-07-30mb/amd,google/mandolin,zork: Set EFS SPI platform configMatt Papageorge
2020-07-30mb/google/zork: remove indirection for dxio lane configurationAaron Durbin
2020-07-30mb/google/zork/var/ezkinil: Configure boot media for new SKUsLucas Chen
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
2020-07-29mb/google/zork: update stapm parameter for berknipKevin Chiu
2020-07-28mb/google/zork: Add Bluetooth reset gpios to devicetreeRob Barnes
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
2020-07-23zork: Create dirinboz variantKevin Chiu
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
2020-07-23mb/google/zork: Remove unnecessary PULL_UP from early_gpio_tableFurquan Shaikh
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
2020-07-23vc/amd/fsp/picasso: add logical to lane number in port descriptor structFelix Held
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
2020-07-17mb/google/zork: Switch to using newly added i2s_machine_dev driverFurquan Shaikh
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
2020-07-17mb/google/zork: Enable ACP_PME_EN and ACP_I2S_WAKE_ENFurquan Shaikh
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
2020-07-16mb/google/zork: Move variant_pcie_gpio_configure() to bootblockFurquan Shaikh
2020-07-16mb/google/zork: Drop variant_romstage_gpio_table()Furquan Shaikh
2020-07-16mb/google/zork: Drop redundant romstage GPIO tableFurquan Shaikh
2020-07-16mb/google/zork: Drop power and reset control in romstage for dalbozFurquan Shaikh
2020-07-16mb/google/zork: Drop power and reset control in romstage for trembyleFurquan Shaikh
2020-07-16mb/google/zork: Keep USI_RST asserted in ramstageFurquan Shaikh
2020-07-16mb/google/zork: Keep pen power enabled in sleep stateFurquan Shaikh
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
2020-07-15mb/google/zork/.../sleep.asl: Remove unnecessary variableRaul E Rangel
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons
2020-07-15mb/google/zork: Change SPI fast speed to 66mhzRob Barnes
2020-07-14mb/google/zork: Add USB to baseboard devicetreeRob Barnes
2020-07-14mb/google/zork: Split devicetree between baseboardsRob Barnes
2020-07-13mb/google/zork: Fix check for variant_uses_v3_schematics()Furquan Shaikh
2020-07-13mb/google/zork: Create Woomax variantKane Chen
2020-07-12mb/google/zork: Update SPI mode to 100MHz, 1-2-2Martin Roth
2020-07-10mb/google/zork: Rename get_gpe_table to variant_gpe_tableRaul E Rangel
2020-07-10mb/google/zork: enable i2c devices in verstageMartin Roth
2020-07-10AMD mainboards: Drop commented-out includeAngel Pons
2020-07-08mb/google/zork: Do not select VARIANT_SUPPORTS_PRE_V3_SCHEMATICS for VilbozFurquan Shaikh
2020-07-08mb/google/zork: Add helpers for v3 schematics and wifi power enableFurquan Shaikh
2020-07-08mb/google/zork: Move GPIO_137 configuration to ramstageFurquan Shaikh
2020-07-08mb/google/zork: Do not share "write protect" information with depthchargeFurquan Shaikh
2020-07-08mb/google/zork: Enable psp_verstageMartin Roth
2020-07-07mb/google/vilboz: Drop gpio.c from variants/vilbozPeichao Wang
2020-07-07mb/google/vilboz: Fix variant ID for v3+ schematics for vilbozPeichao Wang
2020-07-07mb/google/zork: update telemetry settings for dalbozChris Wang
2020-07-06mb/google/zork: Apply cereme telemetry settings for dalbozChris Wang
2020-07-06mb/google/zork: Apply USB2 default phy tune parameter for Zork familyChris Wang
2020-07-05mb/google/zork: Drop check for ENV_RAMSTAGE in mainboard_ec_initFurquan Shaikh
2020-07-05mb/google/zork: Drop mainboard_ec_init() from romstageFurquan Shaikh
2020-07-05mb/google/zork: Drop unused function variant_romstage_entry()Furquan Shaikh
2020-07-05mb/google/zork: Use SSDT generator for Chrome EC audio codec deviceFurquan Shaikh
2020-07-03mb/google/zork: adjust eSPI virtual irq settingsAaron Durbin
2020-07-02mb/google/zork: Generate I2SM ACPI device at runtimeFurquan Shaikh
2020-07-01mb/google/zork: Move EC wake to happen in ramstageFurquan Shaikh
2020-07-01mb/google/zork: Fix pad configurations for wake signalsFurquan Shaikh
2020-07-01mb/google/zork/var/morphius: Enable support for garaged stylusFurquan Shaikh
2020-07-01mb/google/zork: Drop unused/unnecessary GPIO macrosFurquan Shaikh
2020-07-01mb/google/zork/var/ezkinil: Fix GPIO_86 configuration for bid3Furquan Shaikh
2020-07-01mb/google/zork: Drop GPIO_27 configuration for trembyle referenceFurquan Shaikh
2020-07-01mb/google/zork: Add support for active low wifi power enableFurquan Shaikh
2020-07-01mb/google/zork: Move GPIO sleep table to dalboz and trembyle referenceFurquan Shaikh
2020-07-01mb/google/zork: Move PCIE_RST1_L deassertion to happen early for dalbozFurquan Shaikh
2020-07-01mb/google/zork: Configure GPIO_40 as drive low in sleep pathFurquan Shaikh
2020-07-01mb/google/zork: Reconfigure PCIE_RST1_L as GPO driven low on sleep pathFurquan Shaikh
2020-07-01mb/google/zork: Turn off power to camera and pen in sleep pathFurquan Shaikh
2020-07-01mb/google/zork: Add support for GPIO configuration on sleep pathFurquan Shaikh
2020-07-01mb/google/zork: update G2 TS RST delay timeKevin Chiu