summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork
AgeCommit message (Collapse)Author
2021-01-28mb/google/zork: add MST details to trembyle devicetreeShiyu Sun
Added device hid info to the MST RTD2141b device on trembyle. BRANCH=zork BUG=b:147402710 TEST=Build and flash BIOS image, see 10EC2141 appears under /sys/bus/i2c/devices Signed-off-by: Shiyu Sun <sshiyu@chromium.org> Change-Id: I97a67f9dbc31cd788d579252d7d355b24d97ca30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2021-01-28ACPI: Move include for <vc/google/chromeos.asl>Kyösti Mälkki
Change-Id: I4356a8bda71e84afe8c348d366479c5006bf2459 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49796 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
Objects that are created with acpigen need to be declared with External () for the generation of dsdt.asl to pass iasl without errors. There are some objects that are common to all platforms, and some that should be declared only conditionally. Having a top-level ASL helps to achieve this. Change-Id: Ibaf1ab9941b82f99e5fa857c0c7e4b6192c74330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-26mb/google/zork/Kconfig.name: remove double space in board variant namesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If0bc153cd3a3391b1607848436f0ab5fcd54ce7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25mb/google/zork: adjust the eDP panel power sequenceChris Wang
set pwron_varybl_to_blon to 0x5, which means fw will delay 20ms between backlight on and vary backlight. BUG=b:171269338 BRANCH=zork TEST=Build; Verify the UPD was passed to system integrated table; measure the power on sequence on dalboz Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I8af35eee7777a8e71b42f0c128795290b8c2c93e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25mb/google/zork: add eDP tuning parameter to fix the eDP noiseChris Wang
needs to adjust the eDP phy setting to fix the eDP noise for WWAN. DP_VS_LEVEL0_PREEMPH_LEVEL0, = 0x00 (0.4v 0db) swing 0, pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004B COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=none TEST=Build; Verify the UPD was passed to system integrated table Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ibe720e26d2257e05a989eaa1fd85d542005cf6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48734 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25mb/google/zork: Fix duplicate i2c_tunnel uidRaul E Rangel
This conflicts with the MSTH i2c_tunnel. BUG=b:175146875 BRANCH=zork TEST=Boot trembyle and inspect ACPI tables. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iac04c7dc361d427f5ebb99644aa70bd0c7dbb918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for gumbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:173476380 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: Ib31c5d55e30b958d3e552e8d0b4a160947444636 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are: tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:165209698 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: I80afd6bf1257b9a72d0d7651b48d243ebaf5de2f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19soc/amd/picasso: move HAVE_ACPI_TABLES from mainboards to SoCFelix Held
The SoC code has in implicit dependency on this option, so select it in the SoC code instead of the mainboard code. Change-Id: Iea908c142f4a94a107cf74a31d9f5e29668d4b5b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-19mb/google/zork: remove MST i2c from dalbozPeter Marheine
Dalboz variants do not use an MST hub; remove the i2c tunnel for it. That bus is actually connected to the battery on these devices, which should not be exposed to the AP. BUG=b:175658311 TEST=builds BRANCH=zork Change-Id: If1714a5c441bf185efd2517c7c94e57b5f351f5a Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49628 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
Enhance USB 2.0 M/B C0, DB C1 A1 port: HS DC Voltage Level(TXVREFTUNE0): 0xe COMPDISTUNE(COMPDISTUNE0): 0x7 BUG=b:165209698 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I371e4295c2ee161096f0a277c0c649bf217269b2 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-15mb/google/zork/var/shuboz: update STAPM add telemetry settingKane Chen
1. Modify STAPM time constant 2500 to 1400. 2. Add telemetry setting: VDD Slope : 30518 VDD Offset: 435 SOC Slope : 22965 SOC Offset: 165 BUG=b:177399751 BRANCH=master TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I251029389c10ee0f17f368b1c00ac666d372fc3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-15mb/google/zork: update DRAM table for berknipKevin Chiu
Add Hynix DDR4 DRAM H5ANAG6NCJR-XNC, index was generated by gen_part_id BUG=b:176313722 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ia1947fa158a1113c4a0b1a0d55f657ddaac43382 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-15mb/google/zork/var/vilboz: Add WiFi SAR for VilbozFrank Wu
The fw_config field SPI_SPEED is not used for zork devices. To define SAR config, use the fw_config bit[23..26]. Then vilboz can loaded different WiFi SAR table for different SKUs. BUG=b:176858126, b:176751675, b:176538384 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage, then verify that tables are in CBFS and loaded by iwlwifi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5ba98799e697010997b515ee88420d0ac14ca7ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/49296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-13mb/google/kahlee,zork: Use mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ic9cdcc497bf1a9f5bfed5e6d95040bfa602b0b89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12mb/google/zork/var/vilboz: Fix FW_CONFIG_SHIFT_WWAN valueJohn Su
The FW config takes 2 bits for USE_FAN[27,28]. So FW_CONFIG_SHIFT_WWAN value should be 29. BUG=b:174121847 BRANCH=zork TEST=build vilboz Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ica6d04f9c48aa0800189283608bf57416ac75cf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49236 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/zork: Unmap FCH IO-APIC PCI interruptsRaul E Rangel
Now that the _PRT generates a GNB IO-APIC routing table we no longer need to route the PCI interrupts through the FCH IO-APIC. This change unmaps the IRQs since they are no longer used. BUG=b:170595019 TEST=Boot with `pci=nomsi amd_iommu=off` and verify /proc/interrupts Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3467934bfcac14311505bec49a12652490554e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I44f086af6b5dd552efd2bd1ef4db0d69b652826d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-07mb/google/zork: Modify variant to Shuboz supportKane Chen
1. Add ELAN touchscreen/touchpad to overridetree.cb 2. Follow Dalboz setting to add variant.c BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ic3193ca7957251841e75a7e5c7a16fc5047919fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48001 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/zork/var/vilboz: Fix Goodix touchscreen power sequenceFrank Wu
According Goodix GT7375P Programming Guide_Rev.0.6, increase the stop delay time from 100 ms to 160 ms. The power sequence is not met with the latest guide_rev.0.6. BUG=b:176270381 BRANCH=zork TEST=Confirm the measured waveform complies with Goodix touchscreen spec. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I687ffa2eb13a9ddecb3045c5e1540b94417329ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/48907 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06mb/google/zork/mainboard: Remove unused pirq_dataRaul E Rangel
This table was wrong. It's also produced by the SoC code now. BUG=b:170595019 TEST=Verify PCI IRQ: log messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I008b6896064672f9d45a8e12f6cfc62c0cc41536 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-05mb/google/zork: enable wake on MKBP eventsPeter Marheine
The EC generates EC_MKBP_EVENT_DP_ALT_MODE_ENTERED when USB-C connections enter DP alt mode, which should wake the system from S3. Configure S3 wake events to include MKBP so this actually wakes the system. BUG=b:174121852 BRANCH=zork TEST=Generating DP event on MKBP via EC console wakes morphius Change-Id: I8100c6253e8e5cae91586c4f2f45d66c15fecc6d Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-05mb/google/zork: Add INT[E-H] to FCH PIRRaul E Rangel
INT[E-H] are required because the GNB IO-APIC maps the 32 interrupts onto the 8 INT[A-H] that feed into the FCH PIC/IO-APIC. BUG=b:170595019 TEST=Verify ezkinil still boots Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9c6689e212b136f6f3c64152803ed161b2284275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-04mb/google/zork: update DRAM table for morphiusKevin Chiu
Remove index0 DRAM assignment since it doesn't use in any build. Add Hynix DDR4 DRAM H5ANAG6NCJR-XNC, index was generated by gen_part_id BUG=b:175911098 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I853a316c266afafeecff67b263005a77be316e2b Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48723 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22mb/google/zork/var/vilboz: Add enable acp_i2s_use_external_48mhz_osc flagJohn Su
Add enable acp_i2s_use_external_48mhz_osc flag and then WWAN sku will use external clock source at next build. BUG=b:174121847 BRANCH=zork TEST=build vilboz and check MISC_CLK_CNTL1. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ida747938373f648524b1e7f34bc69e372a69c4f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48556 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21zork: update gumboz variantKevin Chiu
gumboz is the dalboz/dirinboz follower. update gumboz variant to align dirinboz settings. BUG=b:174277853,b:173662179 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I80c03d531761c02b68bd127d889c3ace2dd9e99e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-12-17mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
from AMD USB phy specialist recommended that TXVREFTUNE0 shouldn't over 0xD (the maximum) in order to have enough room to accomdate a safe disconnect threshhold in COMPDISTUNE0. TXVREFTUNE0: 0xf -> 0xd BUG=b:172687208 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ia104454d95e5e8d6a212c97fb09d61125945eeea Reviewed-on: https://review.coreboot.org/c/coreboot/+/48653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-17mb/google/zork: Add GPIO to Shuboz supportKane Chen
1. AGPIO5 to NC 2. EGPIO141 to NC 3. EGPIO144 to NC BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I51f291476e01982e1a3f92cd1b338a528434112d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48002 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-16mb/google/zork/: Remove WRDD from VilbozEric Lai
After checked, this project doesn't need this feature. BUG=b:173066178 BRANCH=zork TEST=check no WRDD method in acpi. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9a662953f3047d771f2df919ac80d0440842738e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48621 Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/amd/picasso: rename PICASSO_CONSOLE_UART to AMD_SOC_CONSOLE_UARTFelix Held
This allows factoring out the common initialization for the integrated UARTs. Change-Id: I7399a13b9280b732086c6f8e6dfd9f1207d8c8ff Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48508 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10mb/google/zork: Remove unsused codeMathew King
Remove unused code that appears to be left over from grunt. Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Id5bdb1c957342d55c5e6378c503b8d90da050601 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48505 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
Update telemetry settings. VDD Slope : 32643 -> 26939 VDD Offset: 208 -> 125 SOC Slope : 22742 -> 20001 SOC Offset: -83 -> 168 BUG=b:171668654 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE test report Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic63e069310aa4a66cd4c9058790dbed37e6967f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48288 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork: set APU_EDP_BL_DISABLE to low as defaultChris Wang
set APU_EDP_BL_DISABLE(GPIO_85) to low to avoid the VARY_BL fast than APU_DP_BLON. BUG=b:171954512 BRANCH=zork TEST=validate the panel sequence with scope. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ia6d3f4335583bb2d91a6bce96d89cff84247d0ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/48203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-12-05mb/google/zork: Replace generic driver with sx9324 driverEric Lai
Use a new driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:172397658 BRANCH=zork TEST=run "i2cdump -y -f 0 0x28" and checked all registers are expected. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I869d0b6640247099ca489e96ed94e03811a04bf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47867 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork/var/vliboz: Add LTE_RST power sequenceEric Lai
Latest HW schematic add LTE_RST pin to control module power sequence. BUG=b:173490220 BRANCH=zork TEST=measure the waveform is meet the LTE module spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0f0a35a905d711dd8d17dea2ae82a8dfa1fa05ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/47912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-03mb/google/zork: Set S0IX_SLP_L high in S0, low in S3Martin Roth
This is used as a signal to show the system state. It hadn't been used up to this point as we're not currently using S0i3, but the fingerprint sensor will use it to go into a low power mode, so set it appropriately on Trembyle. Dalboz devices don't use the FPMCU, but set there as well so that the state matches. BUG=b:174695987 TEST=Verify GPIO state in S0 and S3 with the EC BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibc725905909830d44f77c2498a26edf6d7a3dc05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48255 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Vincent Palatin <vpalatin@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/amd: factor out common SMI/SCI enums and function prototypesFelix Held
At least a part or the remaining definitions in the soc-specific smi.h files are also common, but those have to be verified more closely. Change-Id: I5a3858e793331a8d2ec262371fa22abac044fd4a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-12-02mb/google/zork: Update SPD table for ShubozKane Chen
Add memory table to "mem_parts_used.txt", and command to generate files: go build gen_part_id.go ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/shuboz/spd/ ../../../src/mainboard/google/zork/variants/shuboz/spd/mem_parts_used.txt Shuboz memory table as follow: value Vendor Part number 0x00 MICRON MT40A512M16TB-062E:J 0x01 HYNIX H5AN8G6NCJR-XNC 0x02 MICRON MT40A1G16KD-062E:E 0x03 SAMSUNG K4AAG165WA-BCWE BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I5f5f875daab58343f1cc8a9327ea128ba5e1f050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-12-01mb/google/zork: Mark RW_MRC_CACHE as "Preserve"Martin Roth
AGESA checks to make sure that the firmware version reading the MRC cache is the same version that wrote it, so it doesn't need to be erased during a firmware update. BUG=b:173724014 TEST=Flash firmware to DUT, update firmware, check RW_MRC_CACHE was not erased BRANCH=Zork Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ice3d1d467c25366b7ef678cd6481d043f62644ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/47776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-23mb/google/zork: correct USB2 phy TXVREFTUNE0 parameter nameKevin Chiu
From spec, [31:28] "HS DC Voltage Level Adjustment" is "TXVREFTUNE0". correct rx_vref_tune -> tx_vref_tune BUG=None BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I27003a952d8f8bdd8fe52af8a37010e23ee9cdfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/47735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-22mb/google/zork: update berknip CHTC thermal settingKevin Chiu
Update APU CHTC thermal temperature protection point: Temperature limit(C'): 90 Update system config=2 to meet TDP 15W design. BUG=b:162377903 BRANCH=zork TEST=1. emerge-zork coreboot 2. check CHTC temperature by AMD utility Change-Id: I03245a824d838c2d9468ae0fa3cfa34389560e9d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-21zork: Create gumboz variantKevin Chiu
Create the gumboz variant of the dalboz reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:173536689 BRANCH=zork TEST=util/abuild/abuild -p none -t google/zork -x -a make sure the build includes GOOGLE_GUMBOZ Change-Id: I48db7eba7864c18e7307b45fe9f84073bfca0155 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21mb/google/zork: update DRAM table for dirinbozKevin Chiu
Add Hynix DDR4 DRAM, index was generated by gen_part_id H5ANAG6NCJR-XNC BUG=b:173480390 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Ib6f26a7b8d014493f4a256b328bee7ad3bf3c2b9 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21util: Add new DDR4 H5ANAG6NCJR-XNC for zork boardsKevin Chiu
Add DDR4 part H5ANAG6NDMR-XNC. Attributes are derived from data sheets. BUG=None TEST=Compared generated SPD with data sheets and checked in SPD Change-Id: I324aefbce1b138a2f71aad3173d6a138cf7fa510 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-21mb/google/zork: update telemetry settings for WoomaxKane Chen
Update Woomax to improve the performance. BUG=b:168073070 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I2703d15f1fbe715ab1c684274d9e4e0bb55ef23b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-20mb/google/zork: Remove 50ms WIFI delayMartin Roth
As a part of trying to get our boot time as low as possible, any delays in the code should try to be refactored out. This removes the 50ms delay in the WIFI sequence by enabling power and putting the wifi module into reset in bootblock, then bringing it out of reset in ramstage. This is significantly longer than the 50ms requirement. The reset GPIO was already being set high in ramstage, so that code didn't need to be added. BUG=b:171513520 TEST=Boot on boards with different module types, WIFI works on both. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I211d3da338ad368d1f011f03cf7d05121c057075 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-19mb/google/zork: Set GPIO 86 high on bootMartin Roth
GPIO 86 should be set high on boot to save power. BUG=b:173340497 TEST=Build only BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I31ef1d2a1967d82ba5370462783a909417088d2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-17mb/google/zork: Power off fingerprint sensor on shutdownMartin Roth
When the system shuts down, turn the fingerprint sensor off. This sets the GPIOs correctly for the next boot. The fingerprint sensor was previously left on, and was just powering down when the rails went low. On suspend, the fingerprint sensor stays awake and puts itself in a low powerstate mode based on the SLP_Sx_L pin states. BUG=b:171837716 TEST=Fingerprint sensor still works after S3, GPIO state on the boot following a shutdown is low. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I3837b58372d8f4a504535e76bd21c667d68f8995 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47311 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/zork: Assume VBOOT_STARTS_BEFORE_BOOTBLOCKMartin Roth
At this point, the zork platform will only use psp_verstage, so remove the VBOOT_STARTS_IN_BOOTBLOCK option and set code for VBOOT_STARTS- BEFORE_BOOTBLOCK to always be used. TEST=Build & Boot Morphius BRANCH=Zork BUG=b:172848137 Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I30d90fe82c37966a860b52c07a3550dcecf8d19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-16mb/google/zork/: Enable REGULATORY_DOMAIN on VilbozEric Lai
WRDD table is needed for Intel WiFi module to enable SAR function. BUG=b:173066178 BRANCH=zork TEST=dump ACPI and check WRDD exist with Intel WiFi module. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9fd6fd19ed188f7ab91faab9e2599b9b09ca5b22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2020-11-16mb/google/zork: Init fingerprint GPIOs for boot vs resumeMartin Roth
Add a function that initializes GPIOs based on the sleep type that the system is coming back from. This allows initialization of the fingerprint GPIOs which need to be handled differently between wake from S3 and boot from S5. On initial boot, the state of the FP sensor could be either enabled or disabled. Because of this, on boot, we power off the sensor for >200ms, to reset its state, then power it back on. In suspend/resume, the fingerprint sensor should remain powered the entire time. If fingerprint is disabled on the trembyle-based board, set the pins to no-connect. Dalboz doesn't have fingerprint and the GPIOS are configured differently due to the FT5 chip having fewer GPIOS than FP5, so nothing needs to be initialized there. There were also a couple of trivial comment clean ups regarding the FPMCU GPIOS. BUG=b:171837716 TEST=Boot & Check GPIO states. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I16a2e621145782e0a908bb3e49478586c09a0e0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I75a92616f11054993ff5a5bfefce5c3f4638c07c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10mb/google/zork: Create Shuboz variantKane Chen
Create the shuboz variant of the zork reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:172021093 BRANCH=none TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I3f62625f8cbde1c9adf8ab335edeb9e811e32679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47152 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06zork/var/ezkinil: Adjust USB2 phy si fine tune on DVT BoardLucas Chen
Adjust USB2 phy si setting fine tune on DVT for Ezkinil. BRANCH=zork BUG=b:156315391 TEST=Measuring scope timing and test usb detection Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Id537b6e9a17f47481b6aedcea0c6a8474d993b6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-05soc/amd/picasso: move MAX_CPUS setting from mainboard to SoC KconfigFelix Held
Since the mainboard Kconfig is sourced before the SoC one, it would still be possible to override this setting at mainboard level, even though that shouldn't be needed. The maximum CPU count for Picasso is 8, since the chips have only up to 4 cores with up to two threads each. Change-Id: I53449b8fa73c5d13e6ea77bee6eed8896b7d3ec3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47205 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/amd: Change FIRMWARE_LOCATE to FIRMWARE_LOCATIONZheng Bao
Change-Id: I3a3d187fc24ab752dfe61893c15561a92d009fe2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/zork/var/vilboz: Update touch screen power sequenceEric Lai
Add ELAN touch support and update Goodix settings. BUG=b:157265632 BRANCH=zork TEST=emerge coreboot and check both touch screen are workable. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icfc2421061e8b3163d7d5108673351bc17df20ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/46929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-30fw_config: Convert fw_config to a 64-bit fieldTim Wawrzynczak
We all knew this was coming, 32 bits is never enough. Doing this early so that it doesn't affect too much code yet. Take care of every usage of fw_config throughout the codebase so the conversion is all done at once. BUG=b:169668368 TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG and verify the console print contained that bit. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28mb/google/zork: Revert temp acpi backlight fixJosie Nordrum
Remove code to turn on backlight during ACPI mode because backlight has been properly enabled in ACPI. BUG=b:158087989 BRANCH=Zork TEST=tested backlight during reboot and suspend Signed-off-by: Josie Nordrum <JosieNordrum@google.com> Change-Id: I3bf06042aa19e4559127d611d401f0ba0516b3a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28mb/google/zork: Generate acpi methods in mainboard.cJosie Nordrum
Generate acpi methods which enable and disable backlight during _INI, _WAK, and _PTS. BUG=b:158087989 BRANCH=Zork TEST=check backlight during reboot and suspend Signed-off-by: Josie Nordrum <JosieNordrum@google.com> Change-Id: I2f3434dc92de1f697693ff69ca15bd76647b89a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46671 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/zork/vilboz: Enable SAR proximity sensor STH9324Frank Wu
BUG=b:161759253 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage firmware log: \_SB.I2C2.SEMTECH SX9324: SAR Proximity Sensor at I2C: 02:28 kernel log: INFO kernel: [ 11.238644] sx932x i2c-STH9324:00: initial compensation success Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I6294ce291365443dd1c4550ba75cb7f33481b889 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/zork: Update style of check on cbi return valuesEric Lai
Since google_chromeec_cbi_get_board_version and google_chromeec_cbi_get_fw_config both call cbi_get_unit32 and return 0 as success, non-zero as failure. Let's add more readability for the false condition. BUG=None TEST=check with empty CBI value Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia49ac1ee35302f8f6afe8c0eb8e13afdf36c5b2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46566 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24mb/google/zork: update USB 2.0 controller Lane Parameter for berknipKevin Chiu
Enhance USB 2.0 C0/C1 A0/A1 SI by increasing the level of "HS DC Voltage Level" and " Disconnect Threshold Adjustment" registers. COMPDISTUNE0: 0x3->0x7 TXVREFTUNE0: 0x6->0xf BUG=b:166398726 BRANCH=zork TEST=1. emerge-zork coreboot 2. check U2 register is set correctly. 3. U2 SI all pass Change-Id: I69d942605c6d43ece0d71f67df3a5e00b998219b Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46545 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/zork: update telemetry settings for morphiusKevin Chiu
Update the two load line slope settings for the SVID3 telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD Slope: 62852 -> 62641 SOC Slope: 28022 -> 28333 BUG=b:170531252 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Id831907aa47be27fef2e33bb884a1118ffec14a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-10-23mb/google/zork/woomax: Adjust disconnect thresholdRob Barnes
The disconnect voltage needs to be adjusted up because the HS DC voltage level is 0xF. BUG=b:170879690 TEST=Servo_v4 USB hub functions BRANCH=zork Change-Id: If8662015a45c57e457b4593e55af888084842f58 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-21mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
Enhance USB 2.0 SI by increasing the level of "HS DC Voltage Level" and "Disconnect Threshold Adjustment". COMPDISTUNE0: 0x3->0x7 TXVREFTUNE0: 0x6->0xf BUG=b:162614573 BRANCH=zork TEST=1. emerge-zork coreboot 2. check U2 registers are set correctly 3. test with servo v4 type-c, it's working expectedly. 4. U2 SI pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I278cc0aaddbc9fce595bf57ca69ee8abfc9f5659 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46537 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21mb/google/zork: Update telemetry settings for morphiusKevin Chiu
Correct the two load line slope settings for the SVID3 telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. BUG=b:168265881 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Id6c4f1a92d7f2ad293df7b63694e9665b85f8018 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46472 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19Revert "mb/google/zork/dalboz: Increase eMMC initial clock frequency"Rob Barnes
This reverts commit c4a5acdabc28778b49a1c088b0736bac83e2ab51. Reason for revert: Dalboz is missing pull-up on cmd line, so 400khz is not possible. TEST=Boot Dalboz BUG=b:159823235, b:169940175 BRANCH=zork Change-Id: I89653bfeefa522c17ee2d736215bc22aa445871c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-19mb/google/zork/var/vilboz: update dptc stapm timeJohn Su
Update dptc setting: Stapm_time_constant 1400 BUG=b:170696020 BRANCH=zork TEST=emerge coreboot and check "Stapm_time_constant" Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I61d9e00a9d098ad9699b8cf89e70d11de2b95ffd Reviewed-on: https://review.coreboot.org/c/coreboot/+/46048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-10-16mb/google/zork: disable eMMC per FW_CONFIG for berknipKevin Chiu
Berknip has SSD/eMMC SKU, we should turn off eMMC　if storage is NVMe SSD. BUG=b:170592992 BRANCH=zork TEST=1. emerge-zork coreboot 2. Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Change-Id: I7aeabc98fc16bc2837c8dcdc40c3c6a80898cdc9 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-10-14mb/google/zork: Enable wake on wireless lanRob Barnes
Add generic wifi ACPI entry for wake on lan event. Change configuration of GPIO 2/WIFI_PCIE_WAKE_ODL to SCI. BUG=b:162605108 TEST=$ iw phy phy0 wowlan enable disconnect $ cat /proc/acpi/wakeup | grep WF WF00 S3 *enabled pci:0000:01:00.0 $ powerd_dbus_suspend Reboot wifi router, DUT wakes up BRANCH=zork Change-Id: Idbeb2cfbc4995b8382ffc26cbe7b53764fc9252d Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45745 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb/*/*/dsdt.asl: Drop useless comments in DefinitionBlock()Elyes HAOUAS
Change-Id: I1e0489ec6730760f74102cdd00e4aaa66975d69a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mainboard/*/*/dsdt.asl: Make DefinitionBlock's AMLFileName uniformElyes HAOUAS
Make output AML file name uniform. Change-Id: Ic6cac4748a6159c695888b2737ada677d91f4262 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb/google/zork: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I71ee54116ade4d6826dffc31ee879a70d3fc967f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot dirinboz, run integrity test, b:169940185 BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/dalboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1191d73a2a3f72f99de187a946162460acbb287a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45935 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/woomax: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I2fcbe35103020c3444902c077b4985f87f970671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45936 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on Vilboz with emmc BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I9a1e47dbee3fcc7317857d40c5418be30d755d61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Berknip w/ eMMC to OS. BRANCH=zork Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
Current Ram_Id: 0011 MT40A1G16KNR-075-E never be built before. Remove it and change use micron-MT40A1G16KD-062E-E for ram_id:0011. BRANCH=zork BUG=b:159316110 TEST=run gen_part_id then check the generated files. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I28fc39f17e06ecd39f6567613e6ff5919becb2fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45810 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Ezkinil w/ eMMC to OS. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa Reviewed-on: https://review.coreboot.org/c/coreboot/+/45852 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on morphius with and without patch, confirm ~7ms improvement BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/amd/picasso: Remove xhci0_force_gen1 from soc configChris Wang
To remove the xhci0_force_gen1 and use usb3_port_force_gen1 instead. The xhci0_force_gen1 is used for force all port on xhci0 to USB3 GEN1. Now variant can use the usb3_port_force_gen1 to customize which port it needs to limit. BUG=b:167651308 BRANCH=zork TEST=Build, verify the USB3 speed in gen1 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: If5f0c1f22d8c98c4461f09d074bf082c340b14d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-08mb/google/zork: Set USB3 port to force gen1 for morphius and ezkinilChris Wang
In morphius, the USB3 typeA port needs to set to gen1, and for ezkinil all the USB3 ports should force to gen1. So set the corresponding setting to usb3_port_force_gen1 to force USB3 to Gen1. BUG=b:167651308 BRANCH=zork TEST=Build, verify the USB3 speed in gen1 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I10419b91fe86fe3e06de36ddfe0d1769c1031f8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-07mb/google/zork: Add EC device wakeup for morphiusJosie Nordrum
Add support for trackpoint wakeup from S3 by adding device events to mainboard and defining for morphius. BUG=b:160345665 BRANCH=zork TEST=tested trackpoint wake from S3 on morphius DVT Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I982f0f4b60fbaeb389774531e1dee83da77cb8a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-06zork/var/ezkinil: Adjust Touchscreen suspend off timingLucas Chen
Adjust Touchscreen delay off values to let suspend off timing match power down specificatiion. BRANCH=zork BUG=b:163434386 TEST=Measuring scope timing Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I58866122f441cc3c427e659b8a5fdb6643987882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-10-01mb/google/zork: Configure EMMC_RESET_L to drive highKevin Chiu
Configure EMMC_RESET_L (GPIO68) to drive high by default. As per JEDEC specification for eMMC, RST_n_FUNCTION defaults to temporarily disable reset using RST_n signal (which is connected to EMMC_RESET_L on zork). Chrome OS platforms do not configure RST_n_FUNCTION thus making the reset signal unused. The spec also says that there are no internal pulls on the card and hence the RST_n signal should be driven appropriately to prevent the input circuits from flowing unnecessary leakage current. Thus, even though the line remains unused, since it is connected in hardware, this change drives EMMC_RESET_L to high. BUG=b:169222156 BRANCH=zork TEST=emerge-zork coreboot eMMC DUT reboot/suspend x100 iterations pass Change-Id: I9feb826eec8a8cdad5e2bd7efcbb1dcf96185dfd Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-10-01mb/google/zork: Initialize the backlight in the OSMartin Roth
This fix needs to go into ACPI in the long-term, but this should suffice in the short-term. BUG=b:158087989 TEST=Boot berknip, verify backlight is enabled. Test suspend & resume sequence, backlight is still enabled. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6ecc3c9e397c9756a78e480d3f639c507879a0ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/45854 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-01mb/google/zork: Remove code that reconfigured the backlight GPIOMartin Roth
The SMU code was assuming that GPIO 85 was used for a fan, which caused interesting backlight flickering. That has now been fixed, so remove the code that reconfigured it to a GPIO on resume. BUG=b:155667589 TEST=Verify the screen does not flicker on resume from S3 BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6d4f9d98e9df52fefab9b20d0ab0f0b67512d356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-28mb/google/zork: Set eMMC presetsRaul E Rangel
They should be tuned per board to get the best signal and boot time. This fixes the HS400 preset, so it's correctly set to A. It also changes the SDR50 and DDR50 presets to B. We can't boot correctly when DDR50 is set to A. I chose 1 as the init kHz value since that's what depthcharge uses to calculate the init clock. BUG=b:159823235 TEST=Boot Ezkinil and dump SDHCI preset registers. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie2f3497b65d771820ab1a803fec73265547f8906 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-28mb/google/zork: update telemetry settings for berknipKevin Chiu
update telemetry to improve the performance. BUG=b:168581158 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE test Change-Id: Ib93905cd89132664b06f2476e94494e96980642c Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-28mb/google/vilboz: update telemetry settingsChris Wang
update the telemetry setting for second SDLE testing(for APU power adjusting). Those values are used to power calibration the APU power and achieving the best performance. BUG=b:160698427 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4cf5b8f090befd6a3c4990f44f2f200bc66aa1f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44804 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/zork: update telemetry settings for dirinbozKevin Chiu
update telemetry to improve the performance. BUG=b:168585079 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I464b90550aaa1666ce3f2393856bf46fe7686d1d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-28mb/google/zork/vilboz: Add new memory part H5ANAG6NDMR-XNCAmanda Huang
Add new ID for memory part H5ANAG6NDMR-XNC. Command to generate files: go build gen_part_id.go local variant=vilboz ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt BUG=b:165611994 TEST=none Change-Id: Iaf613d54bf23b637e38917937ce3e78702b26a28 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45682 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/zork/vilboz: Remove unused memory part IDsAmanda Huang
These parts have not been used in any vilboz devices. Removing so IDs can be assigned more efficiently. Command to generate files: go build gen_part_id.go local variant=vilboz ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt BUG=b:165611994 TEST=none Change-Id: I99614acaf45db0556120c883577494d9f753ea12 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45679 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28util: Add new memory part for zork boardsAmanda Huang
Add memory part H5ANAG6NDMR-XNC. Attributes are derived from data sheets. BUG=b:165611994 TEST=Compared generated SPD with data sheets and checked in SPD Change-Id: Ifdcc7536441e9f0b94543c6f06fe466596f752dc Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 04:52:25 +0000