summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork
AgeCommit message (Expand)Author
2020-09-28mb/google/zork: disable eMMC per FW_CONFIG for MorphiusKevin Chiu
2020-09-25mb/google/zork: Modify I2C3 CLK for Woomax to meet I2C specificationKane Chen
2020-09-25mb/google/zork: Modify USB 2.0 PHY parameters for WoomaxKane Chen
2020-09-23mb/google/zork: simplify flashmap fileFelix Held
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
2020-09-16zork/var/ezkinil: Fix Touchscreen doesn't work on v3.6x rework boardLucas Chen
2020-09-15mb/google/zork: Fix FPMCU_INT_L configurationFurquan Shaikh
2020-09-14soc/amd/picasso: Move sd_emmc_config into emmc_config structRaul E Rangel
2020-09-13soc/amd/picasso/chip: fix typo in acp_pme_enableFelix Held
2020-09-11mb/google/zork: Add woomax memory ID 0Rob Barnes
2020-09-10soc/amd/picasso: Move APCB generation out of picassoRob Barnes
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
2020-08-31mb/google/zork: Fix SPD typo in trembyle makefileRob Barnes
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
2020-08-31mb/google/zork/dalboz: move PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork/trembyle: add PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork: update GPIO config for dirinbozKevin Chiu
2020-08-31mb/google/zork: update GPIO config for berknipKevin Chiu
2020-08-28mb/google/zork: Modify USI_RESET_L GPIO 140 to be active to lowKane Chen
2020-08-28mb/google/zork: Disable SATA device for all Zork platforms to save powerMatt Papageorge
2020-08-28mb/google/zork/woomax: Remove unused memory partsRob Barnes
2020-08-28mb/google/zork/berknip: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork/dirinboz: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
2020-08-28util: Add memory parts needed by zork boardsRob Barnes
2020-08-26mb/google/zork: meet SAR depedenciesAaron Durbin
2020-08-26mb/google/zork: add TS/TP support for dirinbozKevin Chiu
2020-08-26Reland "mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OS"Furquan Shaikh
2020-08-24mb/google/zork: update telemetry settings for woomaxChris Wang
2020-08-24mb/google/zork: Fix GPIO table for v3.6 schematics for woomaxKane Chen
2020-08-24mb/google/zork: Enable WiFi SAR configsKevin Chiu
2020-08-24mb/google/zork: Add GPIO_144 in touchscreen power on/off sequenceKane Chen
2020-08-24mb/google/zork: Fix VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS for WoomaxKane Chen
2020-08-23mb/google/zork: disable non-GPU HD Audio deviceFelix Held
2020-08-21mb/google/zork/var/ezkinil: Fix stylus GPIO to enable suspendJosie Nordrum
2020-08-21mb/google/zork: provide full range backlight settings to kernelAaron Durbin
2020-08-19mb/google/zork/baseboard: Remove unused referenceMatt Papageorge
2020-08-19mb/google/zork: remove unused asl files for dirinbozKevin Chiu
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
2020-08-18mb/google/zork: Clean up bt reset_gpio removalRob Barnes
2020-08-17mb/google/zork: Switch to normal read mode for EM100Furquan Shaikh
2020-08-17mb/google/zork: adjust i2c2 data hold time for TPKevin Chiu
2020-08-15mb: remove unnecessary FADT flag devicetree entries for PicassoFelix Held
2020-08-13mb/google/zork: Switch to using FW_CONFIG instead of SKU_IDBhanu Prakash Maiya
2020-08-13mb/google/zork: Use FW_CONFIG to enable/disable eMMC on EzkinilBhanu Prakash Maiya
2020-08-13mb/google/zork: Add helper function to read DB ID bits in FW_CONFIGBhanu Prakash Maiya
2020-08-13mb/google/zork: Remove validity checks for FW_CONFIG in CBIBhanu Prakash Maiya
2020-08-13mb/google/zork: Update PICASSO_FW_*_POSITION to match new layoutFurquan Shaikh
2020-08-13mb/google/zork: Disable ACP I2S wake for schematic version 3.6+Furquan Shaikh
2020-08-12mb/google/zork: expose stop gpio for trembyleAaron Durbin
2020-08-12mb/google/zork: Reorganize chromeos.fmd to increase WP_RO to 8MiBFurquan Shaikh
2020-08-11mb/google/zork: config ddi for dirinbozKevin Chiu
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
2020-08-03mb/google/zork: Pass oscout system clk to rt5682Akshu Agrawal
2020-08-03mb/google/zork: Add Samsung K4AAG165WA-BCTD SPDKevin Chiu
2020-07-30mb/amd,google/mandolin,zork: Set EFS SPI platform configMatt Papageorge
2020-07-30mb/google/zork: remove indirection for dxio lane configurationAaron Durbin
2020-07-30mb/google/zork/var/ezkinil: Configure boot media for new SKUsLucas Chen
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
2020-07-29mb/google/zork: update stapm parameter for berknipKevin Chiu
2020-07-28mb/google/zork: Add Bluetooth reset gpios to devicetreeRob Barnes
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
2020-07-23zork: Create dirinboz variantKevin Chiu
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
2020-07-23mb/google/zork: Remove unnecessary PULL_UP from early_gpio_tableFurquan Shaikh
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
2020-07-23vc/amd/fsp/picasso: add logical to lane number in port descriptor structFelix Held
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 04:12:54 +0000