summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork
AgeCommit message (Collapse)Author
2022-04-25mb/google/zork: Correct PIRQ_MISC0 configurationRaul E Rangel
The current configuration is masking off IRQ 1 and IRQ 12 to the PIC. This for some reason causes problems when using level triggered interrupts. This change updates the PIRQ_MISC0 value to match what skyrim is doing. This will enable level interrupts to work correctly. BUG=b:218874489, b:160595155 TEST=Boot zork and verify keyboard still works. Boot with patch train and verify keyboard works as expected. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I46b1fd68915c6f7aa4c34cdba57d24425752bc38 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-20ChromeEC boards: Drop `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
This should no longer be needed because the ASL has been fixed. Change-Id: I4d1500217bef54fa3d2be397e5e2a155da3f965d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
The only purpose of mainboard_chromeos_acpi_generate() was to pass cros_gpio array for ACPI \\OIPG package generation. Promote variant_cros_gpio() from baseboards to ChromeOS declaration. Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-21mb/google/zork/var/dirinboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:211672259 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: Icd4321ec0a284e35511dd4b860a16506f54cf663 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-21mb/google/zork/var/gumboz: Add fw_config probe for ALC5682-VD & VS=
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:215292608 BRANCH=firmware-zork-13434.B TEST=ALC5682I-VS audio codec can work Change-Id: I0b0231a3ee9c0dad289ffd50607b3ae6201f56a0 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-03mb/google/zork: fix SMMSTORE size, alignment in default FMAPMatt DeVillier
SMMSTORE needs to have 64k size (minimum) and have 64k alignment as enforced by asserts added in commit 1ba6049 [drivers/smmstore/store.c: Add static assertion based on fmap]. Adjust size and alignment of SMMSTORE region in FMAP to ensure those conditions are met. Test: build google/morphius without asserts being tripped for above conditions. Change-Id: Ied04e93379e1507f5e6b2a1b71e4098a4561e5d8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/picasso/acpi: rename cpu.asl to pnot.aslFelix Held
After the patch that moved the generation of the PPKG object to Picasso's acpi.c, only the PNOT object remained in its cpu.asl, so rename it to pnot.asl. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic77dacb146aa823fc99f779f465fff28b2aead68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/picasso/acpi: generate PPKG object in generate_cpu_entries callFelix Held
Generate the PPKG object in the generate_cpu_entries function instead of generating the PCNT object that is the used in the PPKG method in cpu.asl to provide the PPKG object. This both simplifies the code and aligns Picasso with Cezanne and Sabrina. This will also make the code behave correctly in a case where the number of CPU cores/threads isn't a power of two. TEST=Mandolin still boots successfully to Linux desktop and dmesg doesn't show any any possibly related problems. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifb84435345c6d8c5d11a8b42e5538cfb86432780 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-11soc/amd/cezanne,picasso,sabrina: Fix incorrect values of CBFS amdfw position ↵Robert Zieba
makefile variables Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded. This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well. BUG=b:198322933 TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-01-31mb/**/Kconfig: Properly override `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`. Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99 Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-28IASL: Ignore IASL's "Missing dependency" warningElyes HAOUAS
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects: 1) If _PRS is present, must have _CRS and _SRS 2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS) 3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS) 4) If _SRS is present, probably should have a _DIS (Remark only) IASL will issue a warning for each missing dependency. Ignore this warnings for existing ASL code and issue a message when the build is complete. Change-Id: I28b437194f08232727623009372327fec15215dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-28mb/google/zork/var/shuboz: Add SPD ID for MT40A512M16TB-062E:RKane Chen
Add supported memory parts in "mem_parts_used.txt" and generate the SPD ID 0x04 for the parts. Shuboz memory table as follow: value Vendor Part number 0000 MICRON MT40A512M16TB-062E:J 0001 HYNIX H5AN8G6NCJR-XNC 0010 MICRON MT40A1G16KD-062E:E 0011 SAMSUNG K4AAG165WA-BCWE 0100 MICRON MT40A512M16TB-062E:R BUG=b:216571906 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-27mb/google/zork/var/vilboz: Add new memory K4AAG165WB-BCWEFrank Wu
Add new ram_id:1100 for memory part K4AAG165WB-BCWE. BUG=b:212507858 TEST=Generate new spd file and build coreboot. Then boot from the DUT with new memory K4AAG165WB-BCWE Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-10src/mainboard/google: Remove unused <acpi/acpi.h>Elyes HAOUAS
Change-Id: I67fc65c5e01bb134e2e3068dc6da03de1183f785 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-10src/mainboard/google: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: I3a6a64273e3883942655272a544c41e90ef519fd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-10src/mainboard: Remove unused <stdlib.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l 'memalign(\|malloc(\|calloc(\|free(' -- src/) Change-Id: Ibc594dc6904b26842cf007884ad1913f99a337f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-04src/mb: Remove unused <string.h>Elyes HAOUAS
Change-Id: I5f2710b2034882a24a041d99e37ec364193d85e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-29mb/google/zork/acpi: Use Printf() for debug printsFelix Singer
Change-Id: I433b7138da84b57e45e816ab116f8ca874fdc0e0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-12-23ChromeOS: Refactor ACPI CNVS generationKyösti Mälkki
Remove chromeos_dsdt_generator() calls under mainboard, it is possible to make the single call to fill \CNVS and \OIPG without leveraging device operations. Change-Id: Id79af96bb6c038d273ac9c4afc723437fc1f3fc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-20mb/google/zork: use full path of SoC's chip.hFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I50d8c45e711dc62afe6f80e0f66422bcc9924dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/60202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-13mb/google/zork/var/shuboz: Add fw_config probe for ALC5682-VD & VSKane Chen
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:198689479 BRANCH=zork TEST=ALC5682-VD/ALC5682I-VS audio codec can work Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0c78aa166010ffa4d0cacc8a11d418d5a6906749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59558 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-08mb/google/zork,soc/amd/psp_verstage: Add verstage_mb_{tpm/espi}_initRaul E Rangel
These functions can't be weak, because they actually need to configure the GPIOs for eSPI and the TPM. With this change zork boots again. I also noticed that zork doesn't use the early table in bootblock. This means that zork will only boot if psp_verstage is enabled. BUG=b:209465425 TEST=boot zork to ramstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-15Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit adb393bdd6cd6734fa2672bd174aca4588a68016. This relands commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: The original CL did not handle some devices correctly. With the fixes: * commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tables) * commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early GPIO tables) * commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage This CL also fix the following platforms: * Change to always trusted: cyan. * Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus, poppy, reef, volteer. * Add to both Makefile and early GPIO table: zork. For mb/intel: * adlrvp: Add support for get_ec_is_trusted(). * glkrvp: Add support for get_ec_is_trusted() with always trusted. * kblrvp: Add support for get_ec_is_trusted() with always trusted. * kunimitsu: Add support for get_ec_is_trusted() and initialize it as early GPIO. * shadowmountain: Add support for get_ec_is_trusted() and initialize it as early GPIO. * tglrvp: Add support for get_ec_is_trusted() with always trusted. For qemu-q35: Add support for get_ec_is_trusted() with always trusted. We could attempt another land. Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-11ChromeOS: Replace with or add <types.h>Kyösti Mälkki
It's commented in <types.h> that it shall provide <commonlib/helpers.h>. Fix for ARRAY_SIZE() in bulk, followup works will reduce the number of other includes these files have. Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05mb/google,intel: Fix indirect include bootmode.hKyösti Mälkki
Change-Id: I9e7200d60db4333551e34a615433fa21c3135db6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04mb/google: Add OEM product names for various boardsMartin Roth
All of these names came from public sources. Signed-off-by: Martin Roth <martin@coreboot.org> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: I1ed9cc0c1ff63dc415e0cc63fa9d2dcd429a093b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/google/zork/var/vilboz: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. Hynix H5ANAG6NCJR-XNC 2. Micron MT40A512M16TB-062E:R 3. ADATA 4JQA-0622AD BUG=b:199469240 BRANCH=firmware-zork-13434.B TEST=FW_NAME=vilboz emerge-zork coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I57cca403800d9731a7b689ac9773a7940e83904e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-10-15Revert "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: This CL did not handle Intel GPIO correctly. We need to add GPIO_EC_IN_RW into early_gpio_table for platforms using Intel SoC. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Iaeb1bf598047160f01e33ad0d9d004cad59e3f75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57951 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-24mb/google/zork: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for following devices: 1. audio_rt5682 2. xhci0_bt 3. xhci1_bt 4. acp_machine 5. i2c2 Change-Id: I56921ab54716e4d771d9de1a479f191ca5657eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23mb/google: Update comments in mem_parts_used.txt to match new templatesReka Norman
BUG=b:191776301 TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Iafcbb3ce33cd2299ff98b54b9200f3e70929fb1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/zork: Migrate zork to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all zork variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for dalboz: util/spd_tools/bin/part_id_gen \ PCO \ ddr4 \ src/mainboard/google/zork/variants/dalboz/spd \ src/mainboard/google/zork/variants/dalboz/spd/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/zork -a -x --timeless Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I305a24f9345bab28ff35e317b6e7fd7efba22413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57772 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-21util: Add DDR4 generic SPD for 4JQA-0622ADFrank Wu
Add SPD support for DDR4 memory part BUG=b:199469240 TEST=none Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ie67cf6b90304f0bcf80838866c7461c0cea86dc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_mainHsuan Ting Chen
vboot_reference is introducing a new field (ctx) to store the current boot mode in crrev/c/2944250 (ctx->bootmode), which will be leveraged in both vboot flow and elog_add_boot_reason in coreboot. In current steps of deciding bootmode, a function vb2ex_ec_trusted is required. This function checks gpio EC_IN_RW pin and will return 'trusted' only if EC is not in RW. Therefore, we need to implement similar utilities in coreboot. We will deprecate vb2ex_ec_trusted and use the flag, VB2_CONTEXT_EC_TRUSTED, in vboot, vb2api_fw_phase1 and set that flag in coreboot, verstage_main. Also add a help function get_ec_is_trusted which needed to be implemented per mainboard. BUG=b:177196147, b:181931817 BRANCH=none TEST=Test on trogdor if manual recovery works Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: I479c8f80e45cc524ba87db4293d19b29bdfa2192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57048 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google: Unify all variants to start with "-> "Martin Roth
All variants originally had been changed to start with an arrow with two spaces following it to line up with the platform name. A number of recent platforms were added only using a single space. This change updates them all to have two spaces so they line up again. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iab9e6207fff5a7d2f6d76e5ca33eeaca721a224f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-08mb/google/zork/var/vilboz: update device generic id for 10EC1015 AMP driverFrank Wu
Update generic id to generate the SSDT1 acpi table successfully BUG=b:196866470 BRANCH=firmware-zork-13434.B TEST=generate SSDT1 acpi table by command "iasl -d SSDT1" Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I09c9adc2db08e8e3905d9ba800948252230e4d54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-02mb/google/zork: correct MST probesPeter Marheine
It turns out that putting a device ref in an overridetree at a different point in the tree will generate a duplicate device definition, such that the change introducing this support was ignoring the device presence specified by overridetree.cb and only using the baseboard configuration. I believe testing of that change was not redone after the baseboard was changed to disable the MST, so that conflicting behavior was not noticed. The incorrect behavior generated a disabled device for the MST at the location specified by the baseboard, and one with the probe as a child of the soc. At runtime this did a fw_config probe of the "I2C 00:4a" device, and later probed a different "I2C 00:4a" which was already disabled. As the disabled one came later, it seems to have completely disabled the MST, discarding the results of the variant-specific probe. BUG=b:185862297 TEST=10EC2141 device is now present on a Dali berknip BRANCH=zork Change-Id: I2a8feb544f3fc198fe6313b226ad8995aad31c3e Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57298 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-30mb/(amd,google): Remove spi configuration from devicetreeMartin Roth
Now that the SPI configuration has been moved into Kconfig, it is no longer needed in devicetree. BUG=b:194919326 TEST=Build & boot guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ifdcd3f33173194c4a25794137756b143751edd70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-28mb/(amd,google): Update SPI Kconfig settings based on devicetreeMartin Roth
This takes the devicetree SPI settings and moves them into Kconfig. BUG=b:195943311 TEST=boot guybrush & majolica and verify spi settings. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Icce1d57761465ae8255e5d9ce8679f3fdcb0ceed Reviewed-on: https://review.coreboot.org/c/coreboot/+/56885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-20mb/google/zork: only enable RTD2141 when presentPeter Marheine
An MST hub is only present on some devices that are configured with a particular daughterboard indicated by EC fw_config, so add a fw_config probe that matches the USB daughterboard ID from CBI to only enable it on devices where present, using variant-specific daughterboard IDs. BUG=b:185862297 TEST=RTD2141 remains in ACPI tables on a berknip with Dali DB, and is not present on the same system if probe is changed to enable it for picasso DB. BRANCH=zork Change-Id: I4ada9b492ab221fa98350bf2faf27a23342f3a55 Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
Specify the type of the `DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If68f11a5ceaa67a3e8218f89e1138c247ebb9a25 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56555 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-24soc/amd/*/chip.h: Correct PSPP Enum ValueMatt Papageorge
It appears the pspp_policy enum is not the same as the FSP definition currently being used. This means that the incorrect PSPP value setting would get read by FSP. For Zork programs this meant we actually were setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE. This change adds DXIO_PSPP_DISABLED as the first enum value to properly match the FSP definition and adjusts non AMD Customer Reference Boards that reference the enum to still send the same value even though it has now change definitions. If we actually want DXIO_PSPP_POWERSAVE for those boards that can be adjusted in a future change. BUG=b:193495634 TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi with other server on local network. Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-07-17mb/google/zork/var/vilboz: Add new memory MT40A1G16RC-062E:BFrank Wu
Add new ram_id:1000 for memory part MT40A1G16RC-062E:B. BUG=b:193732051 TEST=Generate new spd file and build coreboot. Then boot from the DUT with new memory MT40A1G16RC-062E:B Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I07c69f628da7871b990c91af4a8244430b4d96a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56328 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-07mb/google/zork/var/shuboz: adjust telemetry settingsKane Chen
According to stardust test tracking report to adjust telemetry setting. VDD Slope : 30595 -> 30400 VDD Offset: 77 -> 317 SOC Slope : 24063 -> 23789 SOC Offset: 105 -> 94 BUG=b:190338440 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Id997f9cd220d704c5b0882c257a596fb3d2485ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/56077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2021-06-17soc/amd/picasso: introduce and use devicetree aliases for UART0-3Felix Held
Since the default state of the MMIO UART devices in the chipset devicetree is off, the mainboard devicetree entries that disable MMIO UART devices are removed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16mb/google/zork: enable UART0 in devicetreeFelix Held
This a mainly a preparation for adding the MMIO UART devices to the chipset devicetree. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I533e4a909fdeb1614dbc5df015440b9df5d83233 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/picasso: introduce and use devicetree aliases for I2C2&I2C3Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I06102f4fcc3bf9de332c71a52c632241b95cde19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-07psp_verstage: initialize i2c in soc_initKangheui Won
GSC is connected with AP via i2c bus so we need to enable i2c in psp_verstage. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I5f7b73be67a692ea7de31ae53bd111d0e4b6998c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55136 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for remaining PCIe devicesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id2bdce5871f57e9edb17f89cba61b5c5ae018566 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for PCIe devices on bus 0Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6199c70163d32467abe5ba5da55c73ff62ba10f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-14mb/google/zork: update DRAM table for berknip/dirinboz/gumbozKevin Chiu
Add Samsung DDR4 memory part K4AAG165WB-BCWE 16Gb index was generated by gen_part_id BUG=b:180986354 TEST=none Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I94b950b51b41767676ab3ddf89e88860c42f5f1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-13mb/google/zork/var/shuboz: update USB OC pin mappingKane Chen
modify USB OC pin setting for Shuboz/Jelboz/Jelboz360 Shuboz/Jelboz: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_PIN_1" # USB A1 usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 Jelboz360: usb_port_overcurrent_pin[0] = "USB_OC_PIN_0" # USB C0 usb_port_overcurrent_pin[1] = "USB_OC_PIN_0" # USB A0 usb_port_overcurrent_pin[2] = "USB_OC_NONE" # NONE usb_port_overcurrent_pin[3] = "USB_OC_PIN_1" # USB C1 BUG=b:182879559 BRANCH=zork TEST=emerge-zork coreboot, validate the OC mapping. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Icc1fa090109e6be54e2a5f49e364f5502f53aca2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-05-06soc/amd/common/espi,mb/: Allow configuring open drain ALERT#Raul E Rangel
Some designs might wish to use an open drain eSPI ALERT#. This change adds an enum that allows setting the eSPI alert mode. BUG=b:187122344, b:186135022 TEST=Boot guybrush using all 3 alert modes Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-04mb/google/zork/vilboz: Disable HDMI 2.0 for VilbozFrank Wu
Disable HDMI 2.0 for Vilboz and then support display resolution 4K 30Hz BUG=b:179170193 BRANCH=firmware-zork-13434.B TEST=verified that the resolution of the display is 4K 30Hz Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ib0dc0d584f0e87bc9c3da85a583cb8c8bed76440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-04-30soc/amd/common: Move external oscillator config away from commonKarthikeyan Ramasubramanian
The usage of external oscillator has got nothing to do with Audio Co-processor (ACP). Hence move it out of common config and put it into the SoC config where it is being used. BUG=None TEST=Build Dalboz and Vilboz mainboards. Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-29mb/google/zork/smihandler: only print warning in mainboard_smi_gpiFelix Held
zork doesn't configure any GPIO as PAD_SMI. Since mainboard_smi_gpi will only get called for a GEVENT that will cause a non-SCI SMI, this isn't expected to be called. For the unexpected and very unlikely case that it still does get called, put a printk into mainboard_smi_gpi to see what is happening there. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14c67b21a83b334558cdd54ebf700924aa9d0808 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52359 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-29soc/amd/common/acp: Move Audio Co-processor driver to commonKarthikeyan Ramasubramanian
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs. Hence move it to the common location. BUG=None. TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards. Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-16mb/google/zork: Configure HID over I2C related GPIO as level-triggeredVictor Ding
Both touchpads supported by zork use level-triggered wakeup signal. BRANCH=zork BUG=b:172846122,b:182911201 TEST=1. cros build-ap -b zork 2. both Synaptics and ELAN touchpads work fine on Vilboz 3. Wakeup source is correctly reported on Vilboz Signed-off-by: Victor Ding <victording@google.com> Change-Id: Icc2b5ad3bd434c9759a0fdfc121aa3c94f46630e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52367 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16mb/google/zork: Configure IRQs as level triggered for ELAN touchpadVictor Ding
Based on the datasheet provided by ELAN, the /INT pin is "low active" and "indicates touchpad likes to send data to system(host) when low". The signal is level-triggered. BRANCH=zork BUG=b:172846122 TEST=cros build-ap -b zork Signed-off-by: Victor Ding <victording@google.com> Change-Id: I1f2182aaf483932304591ab14592f35214ea6efd Reviewed-on: https://review.coreboot.org/c/coreboot/+/52366 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: move include to the files where it's usedFelix Held
platform_descriptors.h is unrelated to the contents of baseboard/gpio.h where it was included, so move the includes to the files where it is actually needed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94e59b5aac2df834d956106ac953eebfc5cf6921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52357 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: include amdblocks/gpio_defs.h in baseboard/gpio.hFelix Held
amdblocks/gpio_defs.h provides the definitions of GEVENT_x. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65d398667e6777de6f1fa4e027cf1c75a3e235c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52356 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for dirinbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:175364713,b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I9cf4d51f42fe250340bcb642db07796c9a480c34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52312 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-15mb/google/zork: fine tune stamp_boost parameter for gumbozKevin Chiu
The new discovery from Google & AMD, the value currently used STAPM Time Constant of 1640 is reducing real PPT TSP from the target 4.8W to 4.68W. Furthermore, when using the "default" STAPM Time Constant of 1400, the actual real PPT TSP becomes 4.89W. Operating at this default settings therefore uses a higher real PPT TSP, which results in a significant performance improvement. BUG=b:184902568 BRANCH=zork TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I102c1c5f8215a6c5f7a4451f5731167c32e27c90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52313 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-11mb/google/zork/vilboz: Update register parameters for sx9324 tuningFrank Wu
To update the sx9324 registers after RF team fine-tuned the parameters. BUG=b:172397658 BRANCH=firmware-zork-13434.B TEST=build coreboot and verify the sx9324 function Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ief85bc61952144a1d7a151100d89938517078ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51936 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-08mb/amd,google: use PAD_NF_SCI for GPIO_2 config in soc/amd based boardsFelix Held
When GPIO_2 was configured as PAD_NF with the WAKE_L function selected the GPIO_2 override in soc_gpio_hook called soc_route_sci that wrote the corresponding SCI mapping register, but didn't set up the SCI level and trigger type, so that couldn't have worked on most of the boards. The only boards where I think this was actually tested are the google/zork ones and they configured GPIO_2 as PAD_SCI where the GPIO mux setting is GPIO mode instead of the WAKE_L mode, but at least the SCI was configured correctly. The new PAD_NF_SCI macro can configure both the right GPIO mux setting and set up the SCI configuration correctly, so use this new macro for the GPIO_2 pin. For test purposes I also added the corresponding GPIO_2 configuration to amd/mandolin to see if the affected registers end up having the expected value using the HDT debugger to look at the registers, but didn't test the wake-up functionality, since S3 resume isn't working on amd/mandolin yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: Ic069e46b759fb6746645faccd254263c49a892d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51756 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-08mb/google/zork/vilboz: Update the ACPI name of ALC1015 AMPFrank Wu
Update the ACPI name from AMDP1015 to 1002105 based on b/177971830#180. AMDI1015 -> AMD platform with RT1015 10021015 -> AMD platform with RT1015p Reference: https://www.spinics.net/lists/alsa-devel/msg124694.html BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage, then verify with ALC1015 AMP Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id8f378ad6f3328d7db949ecdb609a2f16acd3884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52127 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06mb/google/zork: update DRAM table for morphiusKevin Chiu
Add Micron DDR4 memory part MT40A1G16RC-062E-B 16Gb index was generated by gen_part_id BUG=b:184024142 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I890a2da38c8cd1963e9ee7c5df9410b2b2538e9f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-04-06mb/google/zork/var/vilboz: Update WiFi SAR for Vilboz/Vilboz360 LTEFrank Wu
Loading wifi_sar-vilboz-2.hex for vilboz LTE sku. Loading wifi_sar-vilboz-3.hex for vilboz360 LTE sku. BUG=b:183902165, b:176211194, b:183913210 BRANCH=firmware-zork-13434.B TEST=Build coreboot and load the wifi sar table by fw_config Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I37a40456970e3f1dc8b2eed26aa23e3d75748222 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-02mb/google/zork/vilboz: Fix audio test failure on LTE SKUJohn Su
Use board id to switch acp_i2s_use_external_48mhz_osc enable. BUG=b:181720406 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I085c39accd82bf72e4ebbc0394382ed4a7d4e901 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-31mb/google/zork/vilboz: set the eDP phy overriden for WWAN SKUChris Wang
Move the eDP phy overridden to variant for WWAN SKU. BUG=b:171269338 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I0400e8f78b152f260c632fba3cfa43aeca2f6776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-29soc/amd/picasso: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Since soc/romstage.h only contains the mainboard_updm_update function prototype, rename it to soc/fsp.h. This patch also removes a few unused includes. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52c21f13520dbdfab37587d17b3a8a3b1a780f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-28mb/google/zork: update stamp_boost parameter for gumbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:182753072 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I43c104ef912aafecadf9497f9ea20c8478c0e920 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-28mb/google/zork: update telemetry settings for gumbozKevin Chiu
update telemetry to improve the performance. BUG=b:182753072 BRANCH=zork TEST=1. emerge-zork coreboot 2. run AMD SDLE stardust test => pass Change-Id: I6e4d0c6fcd740d82edf073fb307aa6a6b09ec78a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51790 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-26mb/google/zork/vilboz: Enable ALC1015 AMP driverFrank Wu
Enable ALC1015 driver for audio support in vilboz BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage, then verify with ALC1015 AMP Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If0abfd6570579fe637a7bef31de2f01d58f3bdf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-03-25mb/google/zork/variants/baseboard: USB2 HS phy settingsJulian Schroeder
Set default USB2 HS disconnect threshold to maximum to avoid false disconnects that eventually lock up the xHCI controller BUG=b:174538960 TEST=suspend_stress_test -c 50 on vilboz and morphius. Sample set of USB2 HS devices connect and disconnect successfully Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: Ic921d850a0bdd717a2a7e50e9e6f65e39e0607bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51265 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/zork: Enable SSFC as upper 32 bit of fw_configFrank Wu
To append SSFC to top 32 bits of fw_config. BUG=b:177971830 BRANCH=firmware-zork-13434.B TEST=Build coreboot and get the value of SSFC. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Iab1596f1cc8fbbf45e6a9269351bf422a43f3583 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51655 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/zork: Move max98357a out of baseboardEric Lai
Not all of dalboz variants support the this amp. Thus, move out of baseboard. BUG=b:182815488 TEST=builds Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If708574f5fb18dd3b4f2ef978529a16a40d5dc0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-22soc/amd/common/block/i2c: Move SoC agnostic parts into commonKarthikeyan Ramasubramanian
The logic behind I2C bus initialization, I2C MMIO base address getter and setter, I2C bus ACPI name resolution are identical for all the AMD SoCs. Hence moving all the SoC agnotic parts of the driver into the common driver and just configure the SoC specific parts into individual I2C drivers. BUG=None TEST=Build Dalboz and Grunt. Boot to OS in Dalboz. Ensure that the I2C peripherals are detected as earlier in Dalboz. Verify some I2C peripheral functionality like trackpad and touchscreen. Change-Id: Ic9c99ec769d7d8ad7e1e566fdf42a5206657183d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Suggested-by: Kyosti Malkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51509 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-18mb/google/zork/var/shuboz: adjust telemetry settingsKane Chen
According to stardust test tracking report to adjust telemetry setting. VDD Slope : 30518 -> 30595 VDD Offset: 435 -> 77 SOC Slope : 22965 -> 24063 SOC Offset: 165 -> 105 BUG=b:182399760 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie7e6af77bdaad6cc964ac206a69ccb854aae869f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-17sar: Fix semantics of `get_wifi_sar_cbfs_filename()`Furquan Shaikh
Currently, if `get_wifi_sar_cbfs_filename()` returns NULL, then `get_wifi_sar_limits()` assumes that the default filename is used for CBFS SAR file. This prevents a board from supporting different models using the same firmware -- some which require SAR support and some which don't. This change updates the logic in `get_wifi_sar_limits()` to return early if filename is not provided by the mainboard. In order to maintain the same logic as before, current mainboards are updated to return WIFI_SAR_CBFS_DEFAULT_FILENAME instead of NULL in default case. Change-Id: I68b5bdd213767a3cd81fe41ace66540acd68e26a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51485 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15Revert "mb/google/zork: restore stamp_boost parameter to 2500 for dirinboz"Kevin Chiu
This reverts commit 87a1bd696d47f80101e46132efae8cad8cfe5c7e. Reason for revert: skin temperature is overheating due to boost time is too long BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test => pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I31db06f4bcb986398e7bd2ac2858ffbedb257e2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2021-03-10mb/google/zork/var/shuboz: support regular/numpad touchpadKane Chen
Define the 26th bit of the fw_config for the regular touchpad and numpad touchpad selection. REGULAR_TOUCHPAD: 1 NUMPAD_TOUCHPAD: 0 BUG=b:174964012 BRANCH=zork TEST=build pass Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie2055d6bb45a64bc0e59209cecc0f8a31c0f3718 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-10mb/{amd/padmelon,google/zork}: Do not select `VGA_BIOS`Angel Pons
The VGA BIOS for AMD Padmelon and Google Zork are stored in `amd_blobs`. Do not force inclusion of VGA BIOS when `USE_AMD_BLOBS` is not enabled. Change-Id: I206e8fadc14ec0d9b162dc4d72813fdd3d43958b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-10mb/google/zork/var/shuboz: adjust I2C2 data hold time for TPKane Chen
Add ".data_hold_time_ns" to follow I2C specification. The adjusted result aobut 0.315us(more than 0.3us) BUG=b:181091107 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Id92fadcb54b9722709e32ced1f0be001b8c97975 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-10mb/google/zork: Use SOC defines instead of magic numbersMathew King
BUG=b:182269526 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I351fb4fc493bb92b31e2c8bc946dfb048045335c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-03-10mb/google/zork/var/vilboz: Add Mainboard Type for VCORE ICJohn Su
To define Mainboard Type config, use the fw_config bit[26]. Check MB Type to modify SDLE settings for different VCORE IC. BUG=b:177193131 BRANCH=zork Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: If153c0a3e641ae32ef89737925bd9f62dfb71f3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-03-10mb/google/zork: add UPDM updating function before runing FSP-MChris Wang
Add the UPD updating hook in early stage for customization. BUG=b:117719313 BRANCH=zork TEST=build,check the hook function been executed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4954a438a51b29b086015624127e651fd06f971b Reviewed-on: https://review.coreboot.org/c/coreboot/+/51181 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08soc/amd,mb/google/,mb/amd: Move sleepstates.aslRaul E Rangel
This file is common for all the AMD platforms. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I10ee600b4bcd7aaff39bfab075eb4dbc9096b435 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51299 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-05mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
Update telemetry settings for vilboz. VDD Slope : 26939 -> 27225 VDD Offset: 125 -> 187 SOC Slope : 20001 -> 26559 SOC Offset: 168 -> 89 BUG=b:177162553 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Iaf7c5083c4c5affec5ae0b5583efb5237e10d0ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/51165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: chris wang <Chris.Wang@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 13:39:16 +0000