summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork/variants
AgeCommit message (Expand)Author
2021-01-19mb/google/zork: remove MST i2c from dalbozPeter Marheine
2021-01-15mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
2021-01-15mb/google/zork/var/shuboz: update STAPM add telemetry settingKane Chen
2021-01-15mb/google/zork: update DRAM table for berknipKevin Chiu
2021-01-15mb/google/zork/var/vilboz: Add WiFi SAR for VilbozFrank Wu
2021-01-12mb/google/zork/var/vilboz: Fix FW_CONFIG_SHIFT_WWAN valueJohn Su
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
2021-01-07mb/google/zork: Modify variant to Shuboz supportKane Chen
2021-01-07mb/google/zork/var/vilboz: Fix Goodix touchscreen power sequenceFrank Wu
2021-01-05mb/google/zork: enable wake on MKBP eventsPeter Marheine
2021-01-04mb/google/zork: update DRAM table for morphiusKevin Chiu
2020-12-22mb/google/zork/var/vilboz: Add enable acp_i2s_use_external_48mhz_osc flagJohn Su
2020-12-21zork: update gumboz variantKevin Chiu
2020-12-17mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
2020-12-17mb/google/zork: Add GPIO to Shuboz supportKane Chen
2020-12-10mb/google/zork: Remove unsused codeMathew King
2020-12-09mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
2020-12-05mb/google/zork: set APU_EDP_BL_DISABLE to low as defaultChris Wang
2020-12-05mb/google/zork: Replace generic driver with sx9324 driverEric Lai
2020-12-05mb/google/zork/var/vliboz: Add LTE_RST power sequenceEric Lai
2020-12-03mb/google/zork: Set S0IX_SLP_L high in S0, low in S3Martin Roth
2020-12-02mb/google/zork: Update SPD table for ShubozKane Chen
2020-11-23mb/google/zork: correct USB2 phy TXVREFTUNE0 parameter nameKevin Chiu
2020-11-22mb/google/zork: update berknip CHTC thermal settingKevin Chiu
2020-11-21zork: Create gumboz variantKevin Chiu
2020-11-21mb/google/zork: update DRAM table for dirinbozKevin Chiu
2020-11-21mb/google/zork: update telemetry settings for WoomaxKane Chen
2020-11-20mb/google/zork: Remove 50ms WIFI delayMartin Roth
2020-11-19mb/google/zork: Set GPIO 86 high on bootMartin Roth
2020-11-17mb/google/zork: Power off fingerprint sensor on shutdownMartin Roth
2020-11-17mb/google/zork: Assume VBOOT_STARTS_BEFORE_BOOTBLOCKMartin Roth
2020-11-16mb/google/zork: Init fingerprint GPIOs for boot vs resumeMartin Roth
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-10mb/google/zork: Create Shuboz variantKane Chen
2020-11-06zork/var/ezkinil: Adjust USB2 phy si fine tune on DVT BoardLucas Chen
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
2020-11-02mb/google/zork/var/vilboz: Update touch screen power sequenceEric Lai
2020-10-30fw_config: Convert fw_config to a 64-bit fieldTim Wawrzynczak
2020-10-26mb/google/zork/vilboz: Enable SAR proximity sensor STH9324Frank Wu
2020-10-26mb/google/zork: Update style of check on cbi return valuesEric Lai
2020-10-24mb/google/zork: update USB 2.0 controller Lane Parameter for berknipKevin Chiu
2020-10-23mb/google/zork: update telemetry settings for morphiusKevin Chiu
2020-10-23mb/google/zork/woomax: Adjust disconnect thresholdRob Barnes
2020-10-21mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
2020-10-21mb/google/zork: Update telemetry settings for morphiusKevin Chiu
2020-10-19Revert "mb/google/zork/dalboz: Increase eMMC initial clock frequency"Rob Barnes
2020-10-19mb/google/zork/var/vilboz: update dptc stapm timeJohn Su
2020-10-16mb/google/zork: disable eMMC per FW_CONFIG for berknipKevin Chiu
2020-10-14mb/google/zork: Enable wake on wireless lanRob Barnes
2020-10-13mb/google/zork: Convert to ASL 2.0 syntaxElyes HAOUAS
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/dalboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/woomax: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
2020-10-08soc/amd/picasso: Remove xhci0_force_gen1 from soc configChris Wang
2020-10-08mb/google/zork: Set USB3 port to force gen1 for morphius and ezkinilChris Wang
2020-10-07mb/google/zork: Add EC device wakeup for morphiusJosie Nordrum
2020-10-06zork/var/ezkinil: Adjust Touchscreen suspend off timingLucas Chen
2020-10-01mb/google/zork: Configure EMMC_RESET_L to drive highKevin Chiu
2020-09-28mb/google/zork: Set eMMC presetsRaul E Rangel
2020-09-28mb/google/zork: update telemetry settings for berknipKevin Chiu
2020-09-28mb/google/vilboz: update telemetry settingsChris Wang
2020-09-28mb/google/zork: update telemetry settings for dirinbozKevin Chiu
2020-09-28mb/google/zork/vilboz: Add new memory part H5ANAG6NDMR-XNCAmanda Huang
2020-09-28mb/google/zork/vilboz: Remove unused memory part IDsAmanda Huang
2020-09-28mb/google/zork: disable eMMC per FW_CONFIG for MorphiusKevin Chiu
2020-09-25mb/google/zork: Modify I2C3 CLK for Woomax to meet I2C specificationKane Chen
2020-09-25mb/google/zork: Modify USB 2.0 PHY parameters for WoomaxKane Chen
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
2020-09-16zork/var/ezkinil: Fix Touchscreen doesn't work on v3.6x rework boardLucas Chen
2020-09-15mb/google/zork: Fix FPMCU_INT_L configurationFurquan Shaikh
2020-09-14soc/amd/picasso: Move sd_emmc_config into emmc_config structRaul E Rangel
2020-09-13soc/amd/picasso/chip: fix typo in acp_pme_enableFelix Held
2020-09-11mb/google/zork: Add woomax memory ID 0Rob Barnes
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
2020-08-31mb/google/zork: Fix SPD typo in trembyle makefileRob Barnes
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
2020-08-31mb/google/zork/dalboz: move PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork/trembyle: add PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork: update GPIO config for dirinbozKevin Chiu
2020-08-31mb/google/zork: update GPIO config for berknipKevin Chiu
2020-08-28mb/google/zork: Modify USI_RESET_L GPIO 140 to be active to lowKane Chen
2020-08-28mb/google/zork: Disable SATA device for all Zork platforms to save powerMatt Papageorge
2020-08-28mb/google/zork/woomax: Remove unused memory partsRob Barnes
2020-08-28mb/google/zork/berknip: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork/dirinboz: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
2020-08-26mb/google/zork: add TS/TP support for dirinbozKevin Chiu
2020-08-26Reland "mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OS"Furquan Shaikh
2020-08-24mb/google/zork: update telemetry settings for woomaxChris Wang
2020-08-24mb/google/zork: Fix GPIO table for v3.6 schematics for woomaxKane Chen