aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork/variants/vilboz
AgeCommit message (Collapse)Author
2021-02-04mb/google/zork/variants/vilboz: Enable BayHub lv2 driverJohn Su
Enable this driver along with power saving. BUG=b:177955523 BRANCH=zork TEST=boot and see this message: BayHub LV2: Power-saving enabled 110102 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Icd87ea585dfaa2185abf1f7bf803e9c9a6e63972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-03soc/amd/picasso: clean up and re-sort UPD tableChris Wang
Clean up the unused UPD and re-sort the table, and also update the new phy parameter in the soc code and overridetree. remove: EDpPhySel EDpVersion rename: DpPhyOverride -> edp_phy_override EDpPhySel -> edp_physel DpVsPemphLevel -> edp_dp_vs_pemph_level MarginDeemPh -> edp_margin_deemph Deemph6db4 -> edp_deemph_6db_4 BoostAdj -> edp_boost_adj eDP phy setting: DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00(0.4v 0db swing 0,pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004b COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=zork TEST=Build, verify the parameter pass to picasso-fsp Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I655af08e2f86398d088e30d330f49e71cf7e1275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-01-25mb/google/zork: adjust the eDP panel power sequenceChris Wang
set pwron_varybl_to_blon to 0x5, which means fw will delay 20ms between backlight on and vary backlight. BUG=b:171269338 BRANCH=zork TEST=Build; Verify the UPD was passed to system integrated table; measure the power on sequence on dalboz Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I8af35eee7777a8e71b42f0c128795290b8c2c93e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-25mb/google/zork: add eDP tuning parameter to fix the eDP noiseChris Wang
needs to adjust the eDP phy setting to fix the eDP noise for WWAN. DP_VS_LEVEL0_PREEMPH_LEVEL0, = 0x00 (0.4v 0db) swing 0, pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004B COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=none TEST=Build; Verify the UPD was passed to system integrated table Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ibe720e26d2257e05a989eaa1fd85d542005cf6a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48734 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/zork/var/vilboz: Add WiFi SAR for VilbozFrank Wu
The fw_config field SPI_SPEED is not used for zork devices. To define SAR config, use the fw_config bit[23..26]. Then vilboz can loaded different WiFi SAR table for different SKUs. BUG=b:176858126, b:176751675, b:176538384 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage, then verify that tables are in CBFS and loaded by iwlwifi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5ba98799e697010997b515ee88420d0ac14ca7ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/49296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-07mb/google/zork/var/vilboz: Fix Goodix touchscreen power sequenceFrank Wu
According Goodix GT7375P Programming Guide_Rev.0.6, increase the stop delay time from 100 ms to 160 ms. The power sequence is not met with the latest guide_rev.0.6. BUG=b:176270381 BRANCH=zork TEST=Confirm the measured waveform complies with Goodix touchscreen spec. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I687ffa2eb13a9ddecb3045c5e1540b94417329ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/48907 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22mb/google/zork/var/vilboz: Add enable acp_i2s_use_external_48mhz_osc flagJohn Su
Add enable acp_i2s_use_external_48mhz_osc flag and then WWAN sku will use external clock source at next build. BUG=b:174121847 BRANCH=zork TEST=build vilboz and check MISC_CLK_CNTL1. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ida747938373f648524b1e7f34bc69e372a69c4f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48556 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09mb/google/zork/var/vilboz: Update telemetry settingsJohn Su
Update telemetry settings. VDD Slope : 32643 -> 26939 VDD Offset: 208 -> 125 SOC Slope : 22742 -> 20001 SOC Offset: -83 -> 168 BUG=b:171668654 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE test report Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ic63e069310aa4a66cd4c9058790dbed37e6967f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48288 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork: Replace generic driver with sx9324 driverEric Lai
Use a new driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:172397658 BRANCH=zork TEST=run "i2cdump -y -f 0 0x28" and checked all registers are expected. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I869d0b6640247099ca489e96ed94e03811a04bf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47867 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05mb/google/zork/var/vliboz: Add LTE_RST power sequenceEric Lai
Latest HW schematic add LTE_RST pin to control module power sequence. BUG=b:173490220 BRANCH=zork TEST=measure the waveform is meet the LTE module spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0f0a35a905d711dd8d17dea2ae82a8dfa1fa05ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/47912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I75a92616f11054993ff5a5bfefce5c3f4638c07c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-02mb/google/zork/var/vilboz: Update touch screen power sequenceEric Lai
Add ELAN touch support and update Goodix settings. BUG=b:157265632 BRANCH=zork TEST=emerge coreboot and check both touch screen are workable. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icfc2421061e8b3163d7d5108673351bc17df20ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/46929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-26mb/google/zork/vilboz: Enable SAR proximity sensor STH9324Frank Wu
BUG=b:161759253 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage firmware log: \_SB.I2C2.SEMTECH SX9324: SAR Proximity Sensor at I2C: 02:28 kernel log: INFO kernel: [ 11.238644] sx932x i2c-STH9324:00: initial compensation success Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I6294ce291365443dd1c4550ba75cb7f33481b889 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/zork: Update style of check on cbi return valuesEric Lai
Since google_chromeec_cbi_get_board_version and google_chromeec_cbi_get_fw_config both call cbi_get_unit32 and return 0 as success, non-zero as failure. Let's add more readability for the false condition. BUG=None TEST=check with empty CBI value Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia49ac1ee35302f8f6afe8c0eb8e13afdf36c5b2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46566 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/google/zork/var/vilboz: update dptc stapm timeJohn Su
Update dptc setting: Stapm_time_constant 1400 BUG=b:170696020 BRANCH=zork TEST=emerge coreboot and check "Stapm_time_constant" Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I61d9e00a9d098ad9699b8cf89e70d11de2b95ffd Reviewed-on: https://review.coreboot.org/c/coreboot/+/46048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on Vilboz with emmc BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I9a1e47dbee3fcc7317857d40c5418be30d755d61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/vilboz: update telemetry settingsChris Wang
update the telemetry setting for second SDLE testing(for APU power adjusting). Those values are used to power calibration the APU power and achieving the best performance. BUG=b:160698427 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4cf5b8f090befd6a3c4990f44f2f200bc66aa1f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44804 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/zork/vilboz: Add new memory part H5ANAG6NDMR-XNCAmanda Huang
Add new ID for memory part H5ANAG6NDMR-XNC. Command to generate files: go build gen_part_id.go local variant=vilboz ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt BUG=b:165611994 TEST=none Change-Id: Iaf613d54bf23b637e38917937ce3e78702b26a28 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45682 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/zork/vilboz: Remove unused memory part IDsAmanda Huang
These parts have not been used in any vilboz devices. Removing so IDs can be assigned more efficiently. Command to generate files: go build gen_part_id.go local variant=vilboz ./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt BUG=b:165611994 TEST=none Change-Id: I99614acaf45db0556120c883577494d9f753ea12 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45679 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
Allow comments prefixed with '#' in mem_parts_used csv file. BUG=None TEST=Run gen_part_id with mem_parts_used file containing comments Change-Id: Ia9e274d45aa06dea7a3a5f8cd1c8ee2b23398876 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
GPIO_144 is REPORT_EN pin for the touchscreen controller where 1 means enable operation and 0 means stop operation. Override tree exposes this pin as stop GPIO. Thus, it needs to be configured as active low i.e. 0 = active (stop), 1 = inactive (enable report). Change-Id: I349123655260349b78d2f75f846da0ce1dc966fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
v3.6+ of reference schematics have moved to using active low polarity for touchscreen GPIO. This change sets the default polarity in override tree accordingly to active low. To support boards from older builds, variant_touchscreen_update() already updates the polarity to active high. BUG=b:161937506 Change-Id: I370bdb27ea5d0601612d13b515113a6048018964 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
Switch all zork boards to use generated generic SPDs from spd_tools. HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was removed. picasso/Makefile.inc was updated to populate the 2nd APCB channel based on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd entires with _x1/_x2. Command to generate files: $ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do n=$(basename ${b}); if [ "${n}" = "baseboard" ]; then continue fi go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \ src/mainboard/google/zork/variants/${n}/spd \ src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt done BUG=b:162939176 TEST=Boot ezkinil and dalboz check dmidecod -t17 Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was never really used on any of the zork variants. Starting with v3.6, GPIO_89 is left unused in schematics. This change configures GPIO_89 as PAD_NC in baseboard GPIO table. Since EN_DEV_BEEP_L still needs to be driven high to allow speakers to work, GPIO_89 is configured as PAD_GPO driven high on pre-v3.6 schematics. BUG=b:62108046 Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
This change adds support for touchscreen power control using: * GPIO_90 for trembyle based boards * GPIO_32 for dalboz based boards By default, baseboard tables configure these GPIOs as PAD_GPO driven low and override trees expose these pads as enable_gpio to be used by ACPI power resource. In order to support pre-v3.6 boards, override tables configure these pads as PAD_NC and drop the enable_gpio setting from device tree based on board version. BUG=b:161935640, b:162747210 Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
v3.6 of reference schematics have switched the polarity of reset signal to touchscreen controller from active high to active low. This change updates the default configuration in baseboard gpio tables to set the reset GPIO to output low and override tables in variants to set the reset GPIO to output high. Additionally, devicetree by default exposes ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6 boards, reset GPIO is updated to ACTIVE_HIGH based on board version. BUG=b:161937506 Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
update telemetry value for SDLE test result. BUG=b:160698427 BRANCH=None TEST=emerge-zork coreboot Change-Id: Icce57f9be2732ff79f336daa6c447a30247366cf Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
This change adds support for pen insert/eject operations in S0 and wake on pen eject from S3 for vilboz. BUG=b:157628650 Change-Id: I7ba0881b67dfb67c032667d591f7d1806a50af22 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
BUG=b:162010077 Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
Tune I2C bus3 frequency and insure it meets I2C spec. BUG=b:161650117 TEST=flash coreboot to the DUT and actual measured I2C bus3 make sure it meet Spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ifa9f0bce723f55a12fd2313788c995f8326e3e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
This change does the following: a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Appropriate delays are added for power-down sequencing: - Delay after REPORT_EN is disabled - 1ms - Delay after RESET is asserted - 1ms BUG=b:159501288 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
Most of the DXIO descriptors are used to configure PCIe engines and lanes, but on Picasso system some of the DXIO lanes can also be configured as SATA or XGBE ports. Change-Id: I28da1b21cf0de1813d87a6873b8d4ef3c1e0e9dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43675 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=Suspend and resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
Vilboz requires a different HID than rest of the zork variants. Hence, this change sets the HID to AMDI1015 for I2S machine device in vilboz overridetree.cb. BUG=b:157708581 Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. BUG=b:153879530 Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
GPIO_9 is associated with gevent 22. Correct all the misconfigurations and use macros for clarity as to what bit offset is being used instead of open coding things. BUG=b:161205804 Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
This information is redundant since it's already specified in baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb domain 0 is still required because sconfig uses it as an identity anchor to match devicetree and overridetree. BUG=b:157580724 TEST=Boot zork, usb functional Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/vilboz: Drop gpio.c from variants/vilbozPeichao Wang
Update GPIOs since Vilboz hardware design follow schematic V3.2, so gpio.c is unnecessary. BUG=b:157744136 BRANCH=NONE TEST=flash the bios to vilboz DUT and test touchpad function Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I575f8b233b56185f3281ad7127bc274bda5ea801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42986 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/zork: Use SSDT generator for Chrome EC audio codec deviceFurquan Shaikh
This change drops the inclusion of codec.asl in DSDT for `GOOG0013` device and instead uses the newly added Chrome EC audio codec driver for filling in the device node in SSDT. TEST=Verified that following node gets generated: Scope (\_SB.PCI0.LPCB.EC0.CREC) { Device (ECA0) { Name (_HID, "GOOG0013") // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for dalboz referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of dalboz reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If9d0e35801f9f9b15eddeb4ec7068fed6d401307 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251394 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Auto-Submit: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-13mb/google/zork: update DRAM SPD table for vilbozPaul Ma
Add DRAM support for vilboz: Hynix H5AN8G6NCJR-VKC # 0b0000 Hynix H5ANAG6NCMR-VKC # 0b0001 Samsung K4A8G165WC-BCWE # 0b0010 Hynix H5AN8G6NDJR-XNC # 0b0011 Micron MT40A512M16TB-062E-J # 0b0100 Samsung K4AAG165WA-BCWE # 0b0101 Micron MT40A1G16KD-062E-E # 0b0110 BUG=b:157523051 BRANCH=none TEST=build Change-Id: I251fd9cc7bc51bfdeaa577f7034da750e684dc99 Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-11vc/amd/fsp/platform_descriptors: drop prefix from PCIe/DDI structsFelix Held
The picasso_ prefix on the fsp_pcie_descriptor and fsp_ddi_descriptor structs isn't needed, since this code is picasso-specific, so drop it. Change-Id: Ia6a0ddb411aa64becc3c23a876f2ea43cb68e028 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42252 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-04mb/google/zork: create new variant for VilbozPeichao Wang
BUG=b:157499341 BRANCH=NONE TEST=FW_NAME="vilboz" emerge-zork coreboot Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I28ab3edb130fc7bf8b786141bc088166052d4868 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41801 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 11:36:35 +0000