Age | Commit message (Collapse) | Author |
|
The USB OC pin mapping is similar enough to move it to the base board
and just have two overrides for trembyle, which is based on an older
version of the schematics, and one override for woomax, which doesn't
use one USB port.
BUG=b:163081097
Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reverts the code from commit 728c0787f2 that removes the reset
GPIO from the touchscreen ACPI interface.
That patch exposes a bug which leads to an invalid opcode trap in the
touchscreen code. Reverting this gets the system working again, but is
not a long-term solution.
BUG=b:162596241
TEST=System boots to login screen.
Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was
never really used on any of the zork variants. Starting with v3.6,
GPIO_89 is left unused in schematics.
This change configures GPIO_89 as PAD_NC in baseboard GPIO
table. Since EN_DEV_BEEP_L still needs to be driven high to allow
speakers to work, GPIO_89 is configured as PAD_GPO driven high on
pre-v3.6 schematics.
BUG=b:62108046
Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for touchscreen power control using:
* GPIO_90 for trembyle based boards
* GPIO_32 for dalboz based boards
By default, baseboard tables configure these GPIOs as PAD_GPO driven
low and override trees expose these pads as enable_gpio to be used by
ACPI power resource.
In order to support pre-v3.6 boards, override tables configure these
pads as PAD_NC and drop the enable_gpio setting from device tree based
on board version.
BUG=b:161935640, b:162747210
Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
v3.6 of reference schematics have switched the polarity of reset
signal to touchscreen controller from active high to active low. This
change updates the default configuration in baseboard gpio tables to
set the reset GPIO to output low and override tables in variants to set the
reset GPIO to output high. Additionally, devicetree by default exposes
ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6
boards, reset GPIO is updated to ACTIVE_HIGH based on board version.
BUG=b:161937506
Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:162010077
Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
sustained_power_limit = 12w
fast_ppt_limit = 24w
slow_ppt_limit = 20w
BUG=b:162377903
BRANCH=master
TEST=emerge-zork coreboot chromeos-bootimage
Change-Id: I9baf9990e26edbbadfba85bc16b380c46684033d
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The Raydium ACPI entry currently provides a reset GPIO and an _ON/_OFF
method to the kernel. These are contradictory. The ownership of the GPIO
should be mutually exclusive between either the OS or the FW. Since we
have two methods exposed this causes the OS to reset the TS twice. Once
using the _ON method, and once using the GPIO. Additionally the _ON
method is waiting for 20ms after reset while the OS driver uses a 50ms
delay. The Raydium TS datasheet specifies 20ms for FW ready time, so the
OS driver is adding additional padding.
The reference design has a 32ms rise time on the reset line. So without
this patch, the OS tries to reset the TS using the _ON method and it
waits for 20ms. This is not enough time for the reset line to reach
high, let alone account for the FW ready time. The OS driver then tries
to reset the device by toggling the GPIO. It waits 50ms which is still
2ms less than required.
This CL removes the GPIO from being exported in the _CRS so the OS
driver won't try and reset the device. It also increases the reset delay
by 32ms to account for the rise time.
This isn't a complete fix. I think that the slow rise time is causing
some kind of metastability in the TS reset hardware. Using a script to
bind and unbind the TS driver, the TS device becomes unresponsive after
~200 iterations. The only way to reset the device is to power cycle.
The TS power is also not currently controlled by the power resource.
This means that we have no guarantee over when the reset line is
toggled. This will lead to issues while spending and resuming.
BUG=b:160854397
TEST=Boot trembyle and make sure TS works. Suspend/Resume trembyle 300+
times.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I23131be5d7109eed660a8bd6e2c156c015aa3c4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change configures all missing pads in ramstage for trembyle
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops the pulls configured on override GPIOs as they
already have external pull-ups. Also, pads which are unused are
configured as PAD_NC.
BUG=b:154351731
Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
These methods are empty and the kernel treats these as optional.
BUG=b:153001807, b:154756391
TEST=Suspend and resume trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops mainboard.asl from zork because none of the objects
defined in it are used.
BUG=b:153879530
Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO_9 is associated with gevent 22. Correct all the misconfigurations
and use macros for clarity as to what bit offset is being used instead
of open coding things.
BUG=b:161205804
Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This information is redundant since it's already specified in
baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb
domain 0 is still required because sconfig uses it as an identity anchor
to match devicetree and overridetree.
BUG=b:157580724
TEST=Boot zork, usb functional
Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even
rst delay time already meets spec definition: 10us (minimum).
Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine
on those specific m/b+BOE(G2 TS) panel.
BUG=b:159510906
BRANCH=master
TEST=emerge-zork coreboot
boot with G2 TS, make sure G2 TS is functional
Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
samsung-K4A8G165WC-BCWE_x1 # 0b0101
micron-MT40A1G16KD-062E-E_x2 # 0b0110
hynix-H5ANAG6NCMR-XNC_x2 # 0b0111
samsung-K4AAG165WA-BCWE_x2 # 0b1000
BUG=b:159418772
BRANCH=master
TEST=emerge-zork coreboot
Change-Id: I24b632c75d4a0660dc6beb88f135b546860d7079
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42814
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update telemetry to improve the performance.
BUG=b:154879805
BRANCH=master
TEST=emerge-zork coreboot
verify by Stardust test
Change-Id: Iae5486cf2ee26b3d8e6124edfff4fe2d1fbe211e
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42817
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add G2 GTCH7503 HID TS support
BUG=b:159510906
BRANCH=master
TEST=emerge-zork coreboot
boot with G2 TS, make sure G2 TS is functional
Change-Id: Id9ed5fc768459edc4660ddd6fbffb0b1973ce6d1
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change replaces variant_wifi_romstage_gpio_table() with
variant_pcie_power_reset_configure() to handle the reset and power
sequencing for WiFi devices pre- and post- v3 version of schematics.
These are the requirements that need to be satisfied:
1. As per PCI Express M.2 Specification Revision 3.0,
Version 1.2, Section 3.1.4 "Power-up Timing", PERST# should stay
disabled until `TPVPGL` time duration after device power has
stabilized. Value of TPVPGL is implementation specific.
2. For Intel WiFi chip, it is known to get into a bad state if the
above requirement is violated and hence requires a power cycle.
3. On pre-v3 schematics:
- For both dalboz and trembyle references, GPIO42 drives
WIFI_AUX_RESET_L which is pulled up to PP3300_WIFI.
- For both dalboz and trembyle references, PP3300_WIFI is controlled
using GPIO29. This pad gets pulled high by default on PWRGOOD
because of internal pull-up. But, at RESET# it is known to have a
glitch. When GPIO29 gets pulled high, it causes WIFI_AUX_RESET_L to
be pulled high as well. This violates the PCIe power sequencing
requirements. Hence, for pre-v3 schematics on both dalboz and
trembyle, following sequence needs to be followed:
a. Assert WIFI_AUX_RESET_L.
b. Disable power to WiFi.
c. Wait 10ms to allow WiFi power to go low.
d. Enable power to WiFi.
e. Wait 50ms as per PCIe specification.
f. Deassert WIFI_AUX_RESET_L.
4. On v3 schematics:
- For trembyle: WIFI_AUX_RESET_L is driven by GPIO86 which has an
internal PU as well as an external PU to PP3300_WIFI.
- For dalboz: WIFI_AUX_RESET is driven by GPIO29. This is active
high and has an internal PU. It also has an external 1K PD to
overcome internal PU.
- For both dalboz and trembyle references, PP3300_WIFI is
controlled by GPIO42 which has an internal PU and external
PD. Trembyle schematics have a comment saying strong PD of 2.2K but
the stuffed resistor is a weak one (499K). ON dalboz, it uses a
weak PD (which doesn't look correct and instead should be a strong
PD just like trembyle). Having a strong PD ensures that the WiFi
power is kept disabled when coming out of G3 until coreboot
configures GPIO42 as high.
- Thus, for v3 schematics, following sequence needs to be followed:
a. Assert WIFI_AUX_RESET{_L} signal.
b. Enable power to WiFi.
c. Wait 50ms as per PCIe specification.
d. Deassert WIFI_AUX_RESET{_L} signal.
BUG=b:157686402, b:158257076
TEST=Verified that QCA and AX200 cards both continue working. Tested
QCA on Dalboz and Trembyle. Tested AX200 on morphius.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I532131ee911d5efb5130d8710f3e01578f6c9627
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42738
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the baseboard GPIO table in ramstage to match v3
version of trembyle reference schematics. All variants using this
reference are accordingly updated to configure the GPIOs that changed
as part of v3 schematics.
BUG=b:157088093, b:154676993, b:157098434
TEST=Compiles
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib1d6ee2e995c1fca229c20ea63da9a45fb89f64a
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251393
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42724
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for fingerprint device in overridetree for
the following variants:
1. berknip
2. morphius
3. trembyle
Generates the following node in SSDT1:
Scope (\_SB.FUR1)
{
Device (CRFP)
{
Name (_HID, "PRP0001") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Name (_DDN, "Fingerprint Reader") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
UartSerialBusV2 (0x002DC6C0, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.FUR1",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0006
}
})
Name (_S0W, 0x04) // _S0W: S0 Device Wake State
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x0A,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"compatible",
"google,cros-ec-uart"
}
}
})
}
}
BUG=b:147853944
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7ccb3633332ce3e388293872af7b22f1867c8465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I858f870db0babcb51c594570e8136436ecbb0d1d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41823
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a copy of the mb/google/zork directory from the chromiumos
coreboot-zork branch. This was from commit 29308ac8606.
See https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/29308ac8606/src/mainboard/google/zork
Changes:
* Minor changes to make the board build.
* Add bootblock.c.
* Modify romstage.c
* Removed the FSP_X configs from zork/Kconfig since they should be
set in picasso/Kconfig. picasso/Kconfig doesn't currently define the
binaries since they haven't been published. To get a working build
a custom config that sets FSP_X_FILE is required.
BUG=b:157140753
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3933fa54e3f603985a0818852a1c77d8e248484f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41581
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|