summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer
AgeCommit message (Collapse)Author
2020-06-22mb/google/volteer/variants/terrador: Enable Cmd MirrorDavid Wu
Enable CmdMirror for Terrador to achieve optimum routing from SoC to DRAMs BUG=b:156435028 BRANCH=none TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I0db9fff0dddf35c99a6cb2a90d40886ed8e18686 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-22mb/google/volteer/variants/volteer: clean up gpio.cNick Vaccaro
Remove an unneccessary comment and group the variant_early_gpio_table together based on GPIO group. Changed static variable name gpio_table to override_gpio_table to be more descriptive. BUG=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer to kernel. Change-Id: Iabe810df1e5a3df35e3543ab81b9fdb6f76c223a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42577 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: move volteer devices to overridetree.cbNick Vaccaro
Move the following volteer-specific devices from baseboard's devicetree.cb into volteer's overridetree.cb file: - Goodix Touchscreen - ELAN Touchscreen - ELAN Touchpad - SAR0 Proximity Sensor Adjust the other variant's overridetree.cb files to correspond to the changes made to the baseboard's devicetree.cb in this change. BUG=b:159241303, b:154646959 TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot volteer to kernel and verify that the trackpad works. Change-Id: I30f8266ec87a7cde293c84d3e687d133207b8d59 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-22mb/google/volteer: update fw_config definitionNick Vaccaro
Update fw_config definition in devicetree.cb to match current definition for volteer. BUG=b:159157584 TEST=none Change-Id: I761893818231880d86fd13cfa61319157d06a7d5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42331 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: Disable D3Cold for TCSS along with pass through modeJohn Zhao
The pass through mode (SW CM) RTD3 is not supported until QS platform. D3Cold is needed to be disabled along with upstream TBT firmware signed_TGL_HR_4C_A0_rev6_pre4_SW_CM_PM_support_ENG_VER_perst_check_fix. This temporary patch will need to be reverted once PM RTD3 support is validated on QS platform. BUG=b:159050315 TEST=Verfiy PM S0ix along with upstream TBT firmware. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I98ed991e4185abf1f3168e33b099e0e97c9075f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42504 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Divya Sasidharan <divya.s.sasidharan@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/volteer: Override power limits with SKU-specific limitsTim Wawrzynczak
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4) are available for TGL-U. They are dependent upon the SKU of the CPU that the mainboard is running on. Volteer is updated here to use these new limits. To accomplish this, the SoC chip config's power_limits_config member was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE macros. Just before power limits are applied, the correct set of them is chosen from the array based on System Agent PCI ID. Therefore, a TGL board should have two sets of power limits available in the devicetree. BUG=b:152639350 TEST=On a Volteer SKU4 (4-core), verified the following console output: CPU PL1 = 15 Watts CPU PL2 = 60 Watts CPU PL4 = 105 Watts Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-06-22mb/google/volteer: Change VCM and EEPROM configs for ov8856Daniel Kang
TGL RVP and Volteer use ov8856 camera module from different vendors. TGL RVP from Foxlink and Volteer from Sunny. ov8856 sensor is identical for the two modules but VCM and EEPROM are different. Originally, Volteer ACPI was set to align with Sunny module, GT9679. But it turned out GT9679 is compatible with Foxlink's DW9768. So Volteer camera ACPI configuration doesn't need to keep GT9679. BUG=b:158188369 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check user-facing camera functionalities. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I792608f86a59b16545dfa4edf6508de7a444bb26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-19tigerlake: add unique acpi device ids for dptfSumeet R Pawnikar
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms and update volteer speficic dsdt.asl file accordingly. The Linux kernel driver expects these new acpi device ids for dptf functionalities. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-18mb/google/volteer/variants/terrador: Disable EC SW syncDavid Wu
It is the reference board of TGL-Y platform, we want to disable EC SW sync for Proto stage, it would be re-enabled before EVT stage. BUG=b:156435028 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie7999e24e9c173d4870b35ce1728f3dcc8dcac29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/google/volteer: remove unused GPP_H23Nick Vaccaro
BUG=b:157567939 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer to kernel. Change-Id: I3046cf3a359e833a5d204f78ab84312e8665061f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42411 Reviewed-by: Jes Klinke <jbk@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17mb/volteer: Set IomTypeCPortPadCfg default to 0x09000000Brandon Breitenstein
Temporary workaround for S0ix issues related to FSP's handling of 0 value. When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this value which seems to be causing issues with s0ix. This is still being debugged and a final solution will be made when available BUG=b:159151238 TEST=flash image with workaround to volteer and verify that s0ix cycles correctly. Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14mb/google/volteer: Disable HDA PCI device when AUDIO=NONEDuncan Laurie
If there is no installed audio daughter board on volteer then the HDA driver in the kernel will crash on resume. In order to prevent this disable the PCI device when AUDIO=NONE probe match is true. BUG=b:147462631 TEST=boot on volteer and ensure that the PCI device at 0:1f.3 is gone Change-Id: I4a436e1b76418030bf635427e490b54a713fdd33 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14mb/google/volteer/var/terrador: Update dq/dqs mappingsDavid Wu
Update dq/dqs mappings based on terrador schematics. BUG=b:156435028,b:151978872 BRANCH=none TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I97697a3dd9b88eaffe6e2b1be7bd346979cbc956 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-14mb/google/volteer: Enable thermal sensor 4 in DPTF for volteerDeepika Punyamurtula
Enables the fourth thermal sensor for fan in DPTF for volteer BRANCH=None BUG=b:149722146 TEST= On volteer system check `cat /sys/class/thermal/thermal_zone5/type` for TSR3 Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: Ie11496828133aa71f1017f759516e2e5d3dff2d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-12mb/google/volteer/var/voxel: Add memory parts and generate DRAM IDsFurquan Shaikh
This change adds memory parts used by variant voxel to mem_list_variant.txt and generates DRAM IDs allocated to these parts. This variant is not yet supported by coreboot but DRAM IDs need to be generated for it. In the coming days, variant voxel will be added to coreboot. BUG=b:157732528 Change-Id: I8780beec987deb8fed11bb8f84275dcba4768514 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-12mb/google/volteer: Customize PCH VR settings for better Sx power savingsVenkata Krishna Nimmagadda
For Volteer mainboard, this patch set optimized values for PCH external VR settings and ext rail voltage/current, to achieve better power savings in sleep states. v1p05 and vnn power rails can be used as an alternative source by-passing vccin_aux during Sx. This by-pass feature, enables us to shutdown vccin_aux rail which is higher voltage rail compared to v1p05 and vnn. These both rails were disabled by default in FSP. Changes in this patch are: 1. v1p05 and vnn rails are enabled and enabled supported voltage types in S0i1, S0i2, S0i3, S3, S4, S5 states. They were disabled by default. 2. Icc Max for v1p05 changed to 500 mA from default 100 mA. 3. vnn rail's voltage is changed to 5 V from default 4.2 V. BUG=None BRANCH=None TEST="Build and boot volteer and check VR settings with Intel ITP-XDP debugger and verify approx 250 mW power savings in Sx" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ib46423872c956af9aaa92902fce552d5447237c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42223 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-11mb/google/volteer: Update DPTF TSR2 sensor ID for volteerDeepika Punyamurtula
Update DPTF_TSR2_SENSOR_ID to 2. Fixes the issue where TSR1 and TSR2 have the same DPTF_TSR#_SENSOR_ID value causing them to report the same temperature under /sys/class/thermal and also swap TSR0 and TSR1 in DTRT to match physical sensor in volteer schematics BRANCH=None BUG=b:149722146 TEST=On volteer system check TSR1 and TSR2 temperatures, should report different values `cat /sys/class/thermal/thermal_zone[3,4]/temp` Also verify other TSRs using `cat /sys/class/thermal/thermal_zone*/temp` and `ectool tempsinfo all ; ectool temps all` Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: Idc5f35e4faf59b0ee726eb32a08eab4654fb342d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42232 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09mb/google/volteer: move volteer-specific GPIOs to variant gpio.cNick Vaccaro
- Move the GPIOs that are likely to be volteer-specific (mostly peripherals) to reside in variants/volteer/gpio.c so that variants don't have to override too many GPIO settings. - Modify malefor's gpio.c to adjust for the changes to baseboard's gpio.c. - Remove unused GPP_C3 (USB4_SMB_SCL) and GPP_C4 (USB4_SMB_SCA) settings. - Remove unused GPP_D9, GPP_D10, GPP_D11, and GPP_D12 settings. - Remove unused GPP_E8 (SLP_S0IX), COEX, WWAN, and SNDW related settings for malefor. - Remove unused GPP_R4 (HDA_RST_L) setting. BUG=b:157597158 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer SKU4 to kernel. Change-Id: Ib2f384f539d55a3a8d4a7608336ef22aca3d8c4f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-06mb/google/volteer: Drop spd/ folders from variants/Furquan Shaikh
Now that volteer is moved to using the auto-generated SPDs, we no longer need the spd/ folder under each variant. Hence, this change drops the spd/ folders and the SPD files within them. BUG=b:156126658 Change-Id: Icb36adeb11fd68a84df5b225db32fb8d840a530f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41619 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer: Switch to using auto-generated SPDsFurquan Shaikh
This change switches volteer and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. BUG=b:147321551,b:155423877 Change-Id: I9ed48f0b51714b072a0459d0b70b5417a49db54f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/volteer/var/volteer: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by volteer and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Part: K4UBE3D4AA-MGCL Byte# Current New Explanation 6 0xB5 0xB4 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. Part: H9HCNNNBKMMLXR-NEE Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: H9HCNNNFAMMLXR-NEE Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 6 0xF9 0xB8 This device has 4 logical dies instead of 8. Also, signal loading is not used by MRC. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS 22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value should be 0x12,0x29,0x15. 24 0x8C 0x96 taa is .468ns * CAS-40 which results in byte 24 being 0x96 as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x04C0. 123 0x00 0xE2 Fine offset for taa. Expected value is 0xE2 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G32D2NP-046 WT:A Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB5 0x94 This device has 2 logical dies. Also, MRC does not use signal loading. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 12 0x0A 0x02 As per datasheet, this is 1rank and 16-bit wide channel. So, value should be 0x02. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to 380ns in MTB units which is 0x0BE0. 31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to 190ns in MTB units which is 0x05F0. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-06mb/google/volteer/var/halvor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by halvor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: H9HKNNNCRMBVAR-NEH Byte# Current New Explanation 4 0x16 0x15 As per datasheet, density is 8Gb per logical channel. So value should be 0x15. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels 2 dies. Hence, 0x94 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x0460. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G64D4SQ-046 WT:A Byte# Current New Explanation 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels, 2 dies. Hence, 0x94. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/malefor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by malefor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/ripto: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by ripto and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-04mb/google/volteer: Create voxel variantDavid Wu
Create the voxel variant of the volteer reference board BUG=b:157879197 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOXEL Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8ba5412be211730db84675927c500238cb20ff3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-06-03mb/google/volteer/halvor: initialize gpio setting and update overridetree.cbFrank Wu
Based on schematic and gpio table of halvor, generate gpio setting and overridetree.cb for halvor. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that the image-halvor.bin is generated successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ic6bd018551be58945742d1a6e7f7c5560f218e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02mb/google/volteer/ripto: Add audio devices to the treeDuncan Laurie
The ripto board is still being used for testing so make sure it supports the same audio config as volteer. BUG=b:147462631 TEST=build ripto variant Change-Id: Iabeb73307418dc16b12fa60ad26923cd9f6e1f3a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-06-02mb/google/volteer: Add firmware configuration probing for audioDuncan Laurie
For all of the audio devices in devicetree.cb add the probe matches that will determine if the device should be enabled or not based on the selected audio daughter board type. AUDIO=MAX98357_ALC5682I_I2S: enable max98357 and alc5628, disable others AUDIO=MAX98373_ALC5682I_I2S: enable max98373 and alc5682, disable others AUDIO=MAX98373_ALC5682_SNDW: enable soundwire devices, disable others BUG=b:147462631 TEST=test different device present in ACPI based on fw_config value: > AUDIO=NONE ectool cbi set 6 0x00000000 4 2 > AUDIO=MAX98357_ALC5682I_I2S ectool cbi set 6 0x00000100 4 2 > AUDIO=MAX98373_ALC5682I_I2S ectool cbi set 6 0x00000200 4 2 > AUDIO=MAX98373_ALC5682_SNDW ectool cbi set 6 0x00000300 4 2 Change-Id: I5492e8cddcff3ba01023b0daef02be3508d347b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41216 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Add firmware configuration tableDuncan Laurie
Add the current firmware configuration table for the volteer mainboard and define some actions based on probe results for audio: - When I2S options are selected disable the SoundWire GPIOs. - When SoundWire is enabled disable the I2S GPIOs. - When no audio is enabled disable all the GPIOs. BUG=b:147462631 TEST=Test that GPIOs are configured as expected based on the current value of the fw_config field in cbi. Change-Id: I179f8b6436be83a2b37911777764bd26a0d404b7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Reorganize audio codecsDuncan Laurie
- Move all audio devices from baseboard to the volteer variant. - Add max98373 devices and enable the driver - Disable everything in FSP and let coreboot configure GPIOs. BUG=b:147462631 TEST=this change makes all audio devices show up in ACPI, so this was tested by ensuring that all audio devices are present in ACPI. Change-Id: Ic654ea52a549053622603aa8c81fb37577d4e011 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02mb/google/volteer: Enable TCSS DMA0 for VolteerJohn Zhao
This explicitly enables TCSS DMA0 controller and disables TBT PCIe2 and PCIE3 since they are unused on volteer. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I05cc9e3964d8037d433fca443be6e8d5b444bbce Reviewed-on: https://review.coreboot.org/c/coreboot/+/41387 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/volteer: Add PMC.MUX.CONx devices to devicetree for VolteerTim Wawrzynczak
Volteer's MUX connections are known, and can now be described in ACPI tables. Port 1 has the only oddity, with SBU lines staying fixed in the CC1 orientation. TEST=Dump SSDT tables on Volteer, and confirm (coalesced for brevity): Scope (\_SB.PCI0.PMC) { Device (MUX) { Name (_HID, "INTC105C") Device (CON0) { Name (_ADR, 0) Name (_DSD, Package() { Package () { "usb2-port-number", 9 }, Package () { "usb3-port-number", 1 }, }) } Device (CON1) { Name (_ADR, 1) Name (_DSD, Package() { Package () { "usb2-port-number", 4 }, Package () { "usb3-port-number", 2 }, Package () { "sbu-orientation", "normal" }, ... } } } Change-Id: Id361b2df07e87ad72b6a59a686977b3f424e8ecf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-28Revert "Revert "mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 ↵Furquan Shaikh
ports"" This reverts commit 1726fa1f0ce474cde32e8b32be34a212aff3ffba. Reason for revert: Resource allocator is split into old(v3) and new(v4). So, this change to enable hotplug resource allocator for volteer can land back. BUG=b:149186922 Change-Id: Ib6a4df610b045fbc885c70bff3698a032b79f770 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-28mb/google/volteer: Create terrador variantDavid Wu
Create the terrador variant of the volteer reference board BUG=b:156435028 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TERRADOR Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I088861d1f8b7b4ee8de1e5ab6c7d3109ffd0531b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-28mb/google/volteer: Select SX9310 driver in KconfigDuncan Laurie
There are SX9310 devices present in devicetree.cb but the driver is not enabled so it is not getting used. Change-Id: I625233013a2e14eaf758e56027774fbf5df3bc83 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41700 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/google/volteer: fix some white space nitsNick Vaccaro
Convert spaces to tabs in volteer variant makefiles, and remove empty comment lines from file headers. BUG=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and verify volteer boots to kernel. Change-Id: I6c818c3adcc55ce89707efff6dd9a6bce512daa5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41587 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/tigerlake: Remove MIPI clock setting from devicetreeSrinidhi N Kaushik
In Tiger Lake we have support for enabling MIPI clocks at runtime in ACPI. Hence remove setting pch_islclk from devcietree and chip.h. Also update functions which reference pch_isclk. BUG=b:148884060 Branch=None Test=build and boot volteer and verify camera functionality Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/google/volteer: Enable D3HotEnable and D3ColdEnable for VolteerJohn Zhao
This explicitly enables both of TCSS D3HotEnable and D3ColdEnable from Volteer devicetree.cb setting. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1a168ad87169c0f6633704c55c9293aa25710188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-26mb/google/volteer: Enable ELAN trackpad wake suspend functionWilliam Wei
BUG=b:156990317 TEST=emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the ELAN trackpad can wake up unit from suspend. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: If4bea8a9742f7533be2e51b855cc39ca77d73608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-22mb/google/volteer: Add SoundWire codecs to volteer variantDuncan Laurie
Enable drivers for SoundWire codecs and define the topology in the devicetree for the volteer variant with the SoundWire daughter board connected. +------------------+ +-------------------+ | | | Headphone Codec | | Intel Tigerlake | +--->| Realtek ALC5682 | | SoundWire | | | ID 1 | | Controller | | +-------------------+ | | | | Link 0 +----+ +-------------------+ | | | Left Speaker Amp | | Link 1 +----+--->| Maxim MAX98373 | | | | | ID 3 | | Link 2 | | +-------------------+ | | | | Link 3 | | +-------------------+ | | | | Right Speaker Amp | +------------------+ +--->| Maxim MAX98373 | | ID 7 | +-------------------+ This was tested by booting the firmware and dumping the SSDT table to ensure that all SoundWire ACPI devices are created as expected with the properties that are defined in coreboot under \_SB.PCI0: HDAS - Intel Tigerlake HDA PCI device HDAS.SNDW - Intel Tigerlake SoundWire Controller HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/google/volteer: Add overridetree.cb for volteer variantDuncan Laurie
Instead of only using the baseboard devicetree add a placeholder overridetree for volteer and refer to it in Kconfig. This will allow us to add the volteer specific devices here instead of at the baseboard level. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: set DRAM Max Cycle Time to 15Nick Vaccaro
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM part should be set to 0xF. BUG=b:157178553, b:156555863 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a SKU4 volteer to the kernel and run "memtester 6G 100" and verify it completes successfully without error and does not crash. Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: fix error in generic SPDNick Vaccaro
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f). After fixing that error, I noticed that two generic SPDs could be collapsed into one, so I removed one of the duplicate generic SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex), and changed Makefile to collapse volteer's DRAM ID 2 into ID 0. BUG=b:156126658, b:156058720 TEST=Flash and boot a ripto to kernel. Also verified that ripto can boot successfully to the kernel at 4267 MT/sec with FSP built in debug mode with RMT enabled. Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20tigerlake: enable DPTF functionality for volteerSumeet R Pawnikar
Enable DPTF functionality for volteer platform BRANCH=None BUG=b:149722146 TEST=Built and tested on volteer system Change-Id: I385fb409ccd291d97369295ff99f21c9430880f9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41427 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/volteer: Fix camera dsdt config for ov2740Daniel Kang
Link frequency and a format was not correct for volteer proto 2 ov2740 user-facing camera. The link frequency is calculated in the following way. (max frame width * max frame height * max fps * data format in bps / number of lanes / data rate) + max 35% of overhead For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz. 360Mhz after adding 18% of overhead. BUG=b:148428976 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check user-facing camera functionalities. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mainboard/volteer: Update Aux settings for Port 0Brandon Breitenstein
On Volteer port 0 (MB PORT) does not have a retimer so the port needs to be configured for the SOC to handle Aux orientation flipping. This requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0) and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can control the orientation BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-20mb/google/volteer: Enable EARLY_EC_SYNCCaveh Jalali
This enables EC software sync in romstage. BUG=b:148259137 TEST=verified EC is updated in romstage using coreboot serial console logs. Change-Id: Ibb97c1d57220f7fd74131a5aee450b1ab4b1c982 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41078 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/ripto: Update ALC5682 headset interrupt configurationsShaunak Saha
As per schematics configure headset interrupt as edge both for ripto and volteer baseboard. BUG=b:147085988 BRANCH=none TEST=Build and boot ripto board. Test that jack functionality is working fine and also confirm with evtest. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I8e1625140ccf55db8cb0fe3c039f1c31c01069b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16Revert "mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 ports"Furquan Shaikh
This reverts commit 2412924bc7646fc22b2cb1b9108413fa3e849082. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: Iea6db8cc0cb5a0e81d176ed3199c91dcd02d1859 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41411 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15mb/google/volteer: Add delay to WWAN GPIO init sequenceAlex Levin
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin. The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms. BUG=b:152013143 BRANCH=none TEST=traced the signals using a scope to verify timing is met. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 portsFurquan Shaikh
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4 ports. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cb820e83da40434b00198b934453805e35ef1ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/41156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-13mb/google/volteer/variants/halvor: add two SPD filesNick Vaccaro
Adds SPD_LPDDR4X_556b_1R_32Gb_8GbD_QDP_4267.spd.hex, which will be used initially for the "H9HKNNNCRMBVAR-NEH" SKhynix part as DRAM ID #0. Adds SPD_LPDDR4X_556b_1R_64Gb_16GbD_QDP_4267.spd.hex, which will be used initially for the "MT53E1G64D4SQ-046 WT:A" Micron part as DRAM ID #1. BUG=b:155423877 TEST=none Change-Id: I5580f602cd411e415dafcb36bd1ffa43c4f02f60 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41076 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer/variants/volteer: Add three generic SPD filesNick Vaccaro
- Add SPD_LPDDR4X_200b_1R_16Gb_16Row_DDP_4267.spd.hex, initially used for the SKhynix H9HCNNNBKMMLXR-NEE part with DRAM ID #2 - Add SPD_LPDDR4X_200b_2R_64Gb_ODP_4267.spd.hex, initially used for the SKhynix H9HCNNNFAMMLXR-NEE part with DRAM ID #3 - Add SPD_LPDDR4X_200b_2R_32Gb_QDP_4267.spd.hex, initially used for the Micron MT53E1G32D2NP-046 WT:A part with DRAM ID #4 BUG=b:147857288 TEST=none Change-Id: I60d8bb05a4d6d3608adc7de69efc8623d1ca610d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41126 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer: move SPD files to variant directoriesNick Vaccaro
Memory SPD files for each variant are now stored in the variant's mb/google/volteer/variants/<variant_name>/spd directory instead of storing them in mb/google/volteer/spd. This change moves SPDs to where they are needed and changes the makefile to look for them in their new locations. BUG=b:156126658 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a proto2 SKU4 to the kernel. Change-Id: I759c979027477a2a4c5489a6b12278799488d6e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41184 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer: Enable keyboard backlight featureAngel Pons
This enables the keyboard backlight feature in ACPI for volteer. BUG=b:156326050 TEST=Verified 'KBLT' shows up in the DSDT ACPI table. Change-Id: Id1b1bb059368b0cc36cb06e6cdb8b989060a1dde Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06soc/intel/tgl: Synchronize GPIO ASL table with Linux kernelShaunak Saha
Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01mb/google/volteer/malefor: Enable touch screenWilliam Wei
Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01src: Remove not used 'include <smbios.h>'Elyes HAOUAS
Change-Id: I12345a5b6c9ce94ca9f8b555154b2278a8ff97bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-30mb/google/voteer: Enable DevSlp for SATA port1Wonkyu Kim
BUG=b:152893285 BRANCH=none TEST=Build and boot to OS volteer with Intel SATA and reboot from OS console Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibed8f8c445bf2ac2290ffb670d8dfb83fc960438 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30mb/google/volteer: Create trondo variantDavid Wu
Create the trondo variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:154678884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TRONDO Change-Id: Ie4f9bfe4798e14f91c6cb439f5c5ab2b9ea52b51 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40686 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29mb/google/volteer: Include TCSS power managementJohn Zhao
Include TCSS RTD3 into ACPI DSDT table. BUG=b:140290596 TEST=Booted to kernel and verified tcss xhci/pcierp/dma power state D3 entry/exit. Change-Id: Iae31a29eb23f7370737d097dd401f4056b8b7052 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-29mb/google/volteer: Work around TPM issue by enabling GPIO PM in S0ixVenkata Krishna Nimmagadda
Setting the default values for GPIO community power management, causes issues in detecting TPM interrupts. So to avoid that GPIO PM has to be disabled in devicetree. But for S0ix it is needed. This patch implements a workaround in ASL code to enable GPIO PM on S0ix entry and disable it on S0ix exit. This patch adds the following three platform specific methods. 1. MS0X to enable power management features for GPIO communities on entry and on exit, it disables them. 2. MPTS to enable power management features for GPIO communities when preparing to sleep. 3. MWAK to disable power management features for GPIO communities on waking up. BUG=b:148892882 BRANCH=none TEST="Boot with this change on volteer proto1 and check for GPIO community config with debugger" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: If522c82c0069a4bf5738beb73a2b4f11ed6f51d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40261 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28mb/google/volteer: move mipi_camera.asl to variants foldersNick Vaccaro
Moves mipi_camera.asl from mb/google/volteer/acpi/ to mb/google/volteer/variant/baseboard/include/baseboard/acpi/. Adds mipi_camera.asl to variant/[volteer|ripto]/include/acpi/. Adds new VARIANT_HAS_MIPI_CAMERA Kconfig option. Adds VARIANT_HAS_MIPI_CAMERA for volteer and ripto variants. BUG=b:154648941, b:154646959 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot Ripto and Volteer to kernel. Change-Id: I2f28243dfb945857d26f27f07968a15a3eeb7a4f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40578 Reviewed-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28mb/google/volteer: implement mainboard_get_dram_part_num()Nick Vaccaro
Implements mainboard_get_dram_part_num() to override dram part number with a part number read from CBI. BUG=b:146464098 TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer, boot and log into kernel, execute "mosys memory spd print id" and verify that the memory part number from the cbi gets displayed properly. Change-Id: I3a20691f601cb513ee0936c8d141233c3d06db3d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-27mb/google/volteer: add touchscreen entry to VolteerAlex Levin
BUG=b:149588766 TEST=ELAN and Goodix touchscreen works. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I1c3e75eb03a8ab434ee58bf36a155f2255612083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-04-20soc/intel/tigerlake: Update iDisp Link UPD settingsSrinidhi N Kaushik
Remove explicit setting of iDisp Link parameters. These settings are related to configuration for the link between HD-Audio controller and Display unit for purposes of HDMI/DP Audio playback. During PO, observed that without setting these params display part was not binding. With the latest code verified that we dont need to explicitly set these parameters anymore. HDMI/DP audio playback works fine with default settings. BUG=b:151451125 BRANCH:none TEST= build and boot volteer/ripto and verify HDMI/DP audio playback Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jairaj Arava <jairaj.arava@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/volteer: add ec device entry to devicetreeNick Vaccaro
BUG=b:154279851 TEST=none Change-Id: Ibb56d97d5180ab199c52119135f7eff265908667 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-20mb/google/volteer: Update devicetree based on EDSWonkyu Kim
Update device enable/disable based on PCH EDS#576591 vol1 rev1.2 BRANCH=none BUG=b:154037185 TEST= boot up OS in volteer and check and check lspci Unsupported IP should be visable from lspci result Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I61a328da1014ab7584c3ec789971a106c7a0a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40394 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-14mb/google/volteer: Enable RP LTR settingWonkyu Kim
BUG=b:151166040 TEST= build and boot volteer and check LTR and AER value from FSP log Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibbf55e6a08ff5e8f358325bb8e9f1487cc982f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40268 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-14mb/google/volteer: fix incorrect fields in SPDsNick Vaccaro
According to Intel Document #616599, 1) SPD byte offset #5 for Tiger Lake should be "0x21" (16 rows, 10 columns) 2) SPD byte offset #13 for Tiger Lake should be "0x01" (1 channel x16) This change fixes those two values in the existing SPD files for Volteer, and zero's byte 9 (bytes 8-11 should be zero'd out in a generic SPD). BUG=b:152827558 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot Volteer to kernel. Change-Id: Ice6a32a2b3827cf99d8e109731ffd9efabf68de1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-04-14mb/google/volteer: fix CROS_GPIO_WP_AH exportNick Vaccaro
Fix GPIO_PCH_WP (GPP_B11) to associate GPP_PCH_WP with community zero instead of community 1. BUG=b:152876091 TEST="emerge-volteer coreboot chromeos-bootimage", flash, boot to and log into Volteer kernel, execute "wp enable" in H1 console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in H1 console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: I082154efd72459ec54999ed7c7bb7420a38f7b6e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-13mb/google/volteer: enable Early Command TrainingSrinidhi N Kaushik
Update memory configuration on Tiger Lake platform to enable Early Command Training. This feature was not supported before FSP v2527. BUG=b:150357377 BRANCH=None TEST= Build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I674c30f4dfc1af6c0c4a460d66684545a190caf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40023 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10src/mb: Remove unneeded spaces before/after tabsElyes HAOUAS
Change-Id: I02979a0632a7b356985f96c3ba239daba178b4e3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39989 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-06mb/google/volteer: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I8e2aaf681ba3543cfcd400d21f8e94454e9b1c98 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40202 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02soc/intel/tigerlake: Reorganize memory initialization supportFurquan Shaikh
This change reorganizes memory initialization code for LPDDR4x on TGL to allow sharing of code when adding support for other memory types. In follow-up changes, support for DDR4 will be added. 1. It adds configuration for memory topology which is currently only MEMORY_DOWN, however DDR4 requires more topologies to be supported. 2. spd_info structure is organized to allow mixed topologies as well. 3. DQ/DQS maps are organized to reflect hardware configuration. TEST=Verified that volteer still boots and memory initialization is successful. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib625f2ab30a6e1362a310d9abb3f2051f85c3013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-02mb/google/volteer: Create Malefor variantWilliam Wei
This commit creates a malefor variant for Volteer. The initial settings override the baseboard was copied from variant ripto. Fine tune GPIO and memory DQ based on malefor schematics. BUG=b:150653745 BRANCH=volteer TEST=emerge-volteer coreboot Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: Idbeebb13e537287686344740211143df35b7863a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-01soc/intel/tigerlake: Remove Jasper Lake SoC referencesAamir Bohra
This implementation removes all JSL references from the TGL SoC code. Additionally, mainboard code changes are done to support build. BUG=b:150217037 TEST=build tglrvp and volteer Change-Id: I18853aba8b1e6ff7d37c03e8dae2521719c7c727 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
In order to create a working baseline all ports are being set to have retimers. Setting the TcssAuxOri UPD to 0 in order for the SoC to not misconfigure the ports. Volteer will need some additional changes after this is implemented to account for ports that do not have a retimer. This setting is in the process of being documented in the TGL EDS and we can update once it is fully understood what this setting is changing on the SOC side. BUG=b:145943811 BRANCH=none TEST=Boot to OS and check Type-C port1 Display on Volteer, Connecting Type-c display should work regardless of Type-c cable orientation. Change-Id: I29eb0513299126ad8d1ee11ded2c771f28ad13f3 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39460 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30volteer: Create halvor variantFrank Wu
Create the halvor variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:151399850 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_HALVOR Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If4d3417ba55d56af441c99d949a196328d7a1951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-26mb/google/volteer: Use tabs for indentsElyes HAOUAS
Change-Id: I7304b06d7bf34fb7126acfdef811481dc5cba598 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23src/mb/google/volteer: Add camera ACPI configurationDaniel Kang
Add camera ACPI configuration for Ripto/Volteer BUG=None BRANCH=None TEST=Build and boot Ripto or Volteer. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I2b47ccd989192273a29f09bf097e12e357929334 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
This is required for PD notifications on the cros_ec driver. BUG=b:150649744 TEST=Boot volteer with this patch and verify that PD notifier events are being generated. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-15mb/google/volteer: Use generic SPD filesNick Vaccaro
Volteer uses 4 bits (hardware straps) to indicate what memory configuration the board is populated with (i.e. which SPD file to use for the populated memory). This allows for only 16 different SPDs for supporting Volteer and all future variants of Volteer. Currently, each memory chip needs its own SPD file, so we can only support 16 different memory chip options for Volteer and all of its variants. Generic SPD files are just SPD files that have been stripped down to contain only fields that are important for the memory controller (strips out items like vendor info, for example). Using generic SPD files allows for more than 16 different memory options given it's no longer a 1-to-1 mapping as similar memory modules from different vendors can share the same generic SPD file. BUG=b:147857288 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB of memory. Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
Provide settings for configuring the link between HD-Audio controller and display unit for purposes of HDMI/DP Audio playback. BUG=b:144708516, b:148385924 TEST=none Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-12mb/google/volteer: configure L1Substate for PCIeWonkyu Kim
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround. Reference: #613582 Tiger Lake PCH-LP Sightings Report issue id #1409566330 BUG=none BRANCH=none TEST= boot to OS and check warm reboot with NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-11mb/google/volteer: Enable pcie rp11 for optaneVenkata Krishna Nimmagadda
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk related pins. Configuring pciecontroller3 to be set from 2x2. This will by done by auto detecting optane memory: enabling HybridStorageMode. BUG=b:148604250 BRANCH=chromeos TEST='Build, boot and look for two NVMe devices with lspci on Volteer' Cq-Depend: chrome-internal:2501837 Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628 Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428 Tested-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/volteer: Disable WWAN PCIeAlex Levin
Disable WWAN PCIe to allow WWAN enumerate as USB on Volteer. BUG=b:146226689 BRANCH=none TEST=lsusb shows WWAN device Change-Id: I04e49e3ec989d20ea3469fce06051c475b0ed0c8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-10mb/google/volteer: set TcssXhciEn to 1Brandon Breitenstein
BUG=144874778 TEST=Built with Volteer recipe and verified USB functionality Change-Id: I6cbdbd8a4f65a0fe19e3fb8d7b60b8b849f104e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/volteer: Enable FPMCU on volteerAlex Levin
BUG=b:147500717 TEST=none Change-Id: I32fa27b399127dbf8608e0556c77431d2dad652d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/volteer: change two gpio settingsNick Vaccaro
- declare the FPMCU interrupt to be level-triggered - change EC_PCH_WAKE_ODL gpio to native function mode - corrected spelling of a signal name in a comment BUG=b:144933687, b:148179954 BRANCH=none TEST=none Change-Id: I62da900d0b71139e55b52d06ec09ca25106f73cd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-07mb/google/volteer: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi. BUG=none BRANCH=none TEST=Build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia8baf1c7b770db23f31383bda46ae8d090468560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>