summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants
AgeCommit message (Expand)Author
2020-11-09mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHzJohnny Li
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
2020-11-04mb/google/volteer/var/voema: Update dq/dqs mappingsDavid Wu
2020-11-02mb/google/volteer/var/volteer2: Merge `common_soc_config`Angel Pons
2020-11-02mb/google/volteer/variants: Describe USB ports in devicetreeDuncan Laurie
2020-11-02mb/google/volteer: Add DB_USB3_NO_C option for DB_USB fieldDuncan Laurie
2020-11-02mb/google/volteer: New variant for Volteer reworked with DauntlessJes Klinke
2020-11-02mb/google/volteer/var/terrador: Enable SaGv supportDavid Wu
2020-11-02mb/google/volteer/variants/delbin: Update DPTF parameters for delbinFrank Chu
2020-11-02volteer: Create voema variantDavid Wu
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-11-02mb/google/volteer: Disable DPTF active policy for terrador and todorDavid Wu
2020-10-30mb/google/volteer: Remove RIPTO support for cameraDaniel Kang
2020-10-30mb/google/volteer: Separate power resource for VCMDaniel Kang
2020-10-30tigerlake mainboards: switch to devtree aliases for PMC MUX connectorsTim Wawrzynczak
2020-10-30mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHzJohnny Li
2020-10-29mb/google/volteer: correct memory id for elemiWisley Chen
2020-10-26mb/google/volteer: Add a DPTF policy for EldridNick Chen
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-26mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWRSheng-Liang Pan
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
2020-10-26mb/google/volteer/var/terrador: Disable SRCCLKREQ1#David Wu
2020-10-26mb/google/volteer/var/voxel: Disable SRCCLKREQ1#Sheng-Liang Pan
2020-10-23mb/google/volteer: Add settings for noise mitgationShaunak Saha
2020-10-20mb/google/volteer/var/terrador: Configure board specific DPTF parametersDavid Wu
2020-10-20mb/google/volteer/variants/lillipup: add generic SPDsNick Vaccaro
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
2020-10-19mb/google/volteer/elemi: Add memory.c for DDR4Wisley Chen
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
2020-10-13volteer: Create elemi variantWisley Chen
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-10-12mb/google/volteer/var/voxel: disable DdiPortHpdSheng-Liang Pan
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
2020-10-12mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNCNick Vaccaro
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
2020-09-30mb/google/volteer: Update SLP_Sx assertion widths and PwrCycDurJamie Ryu
2020-09-29mb/google/volteer: Change default camera power GPIO to 0Daniel Kang
2020-09-29mb/google/volteer/halvor: Update settings for audio functionFrank Wu
2020-09-29mb/google/volteer: Add "i2c-allow-low-power-probe" property forDaniel Kang
2020-09-28mb/google/volteer/variants/eldrid: Configure GPP_S4 and GPP_S5nick_xr_chen
2020-09-28mb/google/volteer/var/terrador: Enable audio SMBIOS OEM stringKevin Cheng
2020-09-28mb/google/volteer: Improve Eldrid Port 1 USB2 Eye Diagramnick_xr_chen
2020-09-25mb/google/volteer: Wake on AC connect and disconnectAbe Levkoy
2020-09-25volteer: Create boldar variantRonak Kanabar
2020-09-24mb/google/volteer: Enable CnviBtAudioOffloadJohn Zhao
2020-09-24mb/google/volteer/var/voxel: Update gpio settings for EVTSheng-Liang Pan
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
2020-09-14mb/google/delbin: Configure DP_HPD as PAD_NC and disable DdiPortHpdRavi Sarawadi
2020-09-14mb/google/volteer: Fix GPP_E12 definitionCaveh Jalali
2020-09-14mb/google/volteer/var/voxel: Update DPTF parameters and TCC offsetDavid Wu
2020-09-14mb/google/volteer: Refactor baseboard devicetreeTim Wawrzynczak
2020-09-11mb/google/volteer/variants/volteer2: route GPP_F14 via APICAlex Levin
2020-09-09mb/google/volteer/var/trondo: Add memory parts and generate DRAM IDsDavid Wu
2020-09-09mb/google/volteer/variants/eldrid: add memory.c for ddr4 supportnick_xr_chen
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
2020-09-03mb/google/volteer/variants/volteer: route GPP_F14 via APICAlex Levin
2020-09-02Revert "mb/google/volteer/variant/lindar: Update memory settings."Patrick Georgi
2020-09-02mb/google/volteer/variant/lindar: Update memory settings.rasheed.hsueh
2020-08-31mb/google/volteer: add GPP_F11 to baseboard gpio_tableNick Vaccaro
2020-08-31mb/google/volteer: add generic DDR4 SPDs for EldridNick Vaccaro
2020-08-31mb/google/volteer/var/halvor: Update TBT2 setting for HalvorFrank Wu
2020-08-28mb/google/volteer: add initial SPDs for Elemi variantNick Vaccaro
2020-08-28mb/google/volteer: update Delbin SPD for H9HCNNNCPMMLXR-NEENick Vaccaro
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
2020-08-27mb/google/volteer*: Enable IPURavi Sarawadi
2020-08-26mb/google/volteer/variant/lindar: Update gpio and devicetree settingsJulia Tsai
2020-08-26mb/google/volteer/var/halvor: Update USB relevant GPIO settingsEric Lai
2020-08-24mb/google/volteer/var/terrador: Add PMC.MUX.CONx devices to devicetreeDavid Wu
2020-08-24mb/google/volteer/var/todor: Add PMC.MUX.CONx devices to devicetreeDavid Wu
2020-08-24mb/google/volteer: Update settings for FPMCU on HalvorJohn Su
2020-08-24mb/google/volteer/var/halvor: Correct USB device tree settingEric Lai
2020-08-24mb/google/volteer/*/gpio.c: add GPP_D16 to early_gpio_tableCaveh Jalali
2020-08-19mb/google/volteer: Update settings for trackpad on HalvorJohn Su
2020-08-18mb/google/volteer: Configure DP_HPD as PAD_NC and disable DdiPortHpdJohn Zhao
2020-08-17mb/google/volteer: Make devicetree default as Aux Orientation retimer controlledBrandon Breitenstein
2020-08-17mb/google/volteer: Define stop_gpio for goodix touch screenCaveh Jalali
2020-08-14mb/google/volteer: Only enable TBT root ports if USB4 is supportedBrandon Breitenstein
2020-08-13mb/google/volteer/var/halvor: Update dq/dqs mappingsFrank Wu
2020-08-13mb/google/volteer/halvor: Enable card reader function on HalvorFrank Wu
2020-08-12mb/google/volteer/halvor: Update settings for WiFi/BT functionsFrank Wu
2020-08-12volteer: Create lindar variantJulia Tsai
2020-08-10mb/google/volteer: Pull up GPP_D16 instead of driving itCaveh Jalali
2020-08-10mb/google/volteer/var/terrador: Update gpio settings for Proto2David Wu
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
2020-08-06mb/google/volteer/var/halvor: Update dq/dqs mappingsAmanda Huang
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
2020-08-05mb/google/volteer/var/voxel: Add Raydium touchscreen supportDavid Wu
2020-08-03mb/google/volteer: Change wake to be triggered on a raising edgeAlex Levin
2020-08-03mb/google/volteer/var/todor: Support ELAN i2c-hid touchpadDavid Wu
2020-07-29mb/google/volteer: Update TCSS D3Hot and D3Cold configurationJohn Zhao
2020-07-28mb/google/volteer/var/voxel: Add memory configurationSheng-Liang Pan
2020-07-28mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz Johnny Li
2020-07-28mb/google/volteer2: Add support for passive USB-C daughterboardCaveh Jalali
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 03:45:45 +0000