summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants/lindar
AgeCommit message (Collapse)Author
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
This change uses the newly added meminit block driver and updates TGL SoC and mainboard code accordingly. TEST=Verified that UPDs are configured correctly with and without this change. Change-Id: I6d58cd6568b7bbe03c4e3011b2301209893e85a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
Allow MRC training in SA GV. BUG=b:177779469 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Idc9f634135b489450f53f8cd28d80649309d0f70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
Assigned USB2 port to type-c use. BUG=b:177483060 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9bd820406124927d56296508be05033217c0d472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49638 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-16mb/google/volteer: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5e07584d7857052c7a9388331a475f5a073af038 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
This patch add SSD D3 cold support for lindar. BUG=b:172405687 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ie343bbff3bde4ff2a7e89bd384d5661af372b560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-11mb/google/volteer/variant/lindar: Correct IOM port configurationKevin Chang
Correct IOM setting and TCSS AUX setting to fix type C C0 port display can't output after flip. BUG=b:173093980 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS, test USB function normally. Change-Id: I827a2d8a5b01dce412b4170fde0f638670ab8baf Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-11mb/google/volteer: Assert BT_DISABLE_L (GPP_A13) in early_gpio_tableAlex Levin
BT_DISABLE_L (GPP_A13) has to asserted in early_gpio_table to reset bluetooth on reset. BUG=b:171085081 TEST=volteer2 boots; scope shows assertion of the signal Change-Id: Iaa5799e9cab69c074b7920604c8a6c85ad07358a Signed-off-by: Alex Levin <levinale@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-12-08mb/google/volteer/variant/lindar: Add PMC.MUX.CONx device configuration and ↵Kevin Chang
disabling DDI port 1 and 2 HPD. This patch adds the PMC MUX and CONx devices for lindar. Device specific method contains the port and orientation details used to configure the mux. BUG=b:172533907 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id5ee78b7ece8421144086af9b95f5f0d849be56c Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-12-08mb/google/volteer: Update I2C5 bus freq and devicetree.Stanley Wu
Update lindar gpio settings for Synaptics trackpad no function issue. Update I2C5 bus freq to 400kHz. Improve Goodix Touchscreen power on sequence. BUG=b:160013582 BRANCH=firmware-volteer-13521.B TEST=emerge-volteer coreboot and check system dmesg and evtest can get device. Verify trackpad function workable. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I8c1ab6bab1f9de187e2a78ead7b5bbaf758f5fcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/48150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
According to the spec provided by Bayhub, the 3.3V power rail must be enabled at least 100ms before reset is released. To ensure this, set the power enable signal in the bootblock GPIO table. BUG=b:173676531 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS, test USB function normally. Change-Id: I0c536f36c138ace93766f3024f6ec5d47b38269f Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47799 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
Lindar change amp to ALC1011 Add ALC1011 amp acpi info to devicetree BUG=b:171771736 BRANCH=firmware-volteer-13521.B TEST=build and verify ALC1011 can be recognized. Change-Id: I4d83a19b3baa87cc926bb7c3a2cb96bf3165d2f4 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
Update I2C address for Goodix touchscreen and add ELAN touchscreen & Synaptics trackpad device. Follow CB:47415 to correct HID over I2C device to be level triggerd. BUG=b:160013582 TEST=emerge-volteer coreboot and check system dmesg and evtest can get device. Change-Id: I070fb0e06b588f128253270502c9c2c427c62b84 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ie7b82ea07ef97b2096d75229c445bd3a65cb3be0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-02mb/google/volteer/variants: Describe USB ports in devicetreeDuncan Laurie
Add the USB ports to the devicetree for describing them in ACPI, including defining the port relationships and defining the reset GPIO for the bluetooth device. BUG=b:151731851 TEST=tested on volteer, all other boards were checked against the latest available schematic. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ia1e5b71e7750a478ff79372c48616bbf5c21b79c Reviewed-on: https://review.coreboot.org/c/coreboot/+/46853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants. Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
Based on the Lindar's schematic, generate memory settings. util: rename lp4x spds to include "lp4x-" in name BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Michael Niewöhner
2020-09-02Revert "mb/google/volteer/variant/lindar: Update memory settings."Patrick Georgi
This reverts commit 2ad859988b5243411393fdf3116eea281b92b1bb. Reason for revert: broke the build Change-Id: I7e7d917c2e8b698d5c7c3ce0b6d34e80696185f3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44993 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02mb/google/volteer/variant/lindar: Update memory settings.rasheed.hsueh
Based on the Lindar's schematic, generate memory settings. BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I75fb9254ec7aa40acc2e125f0c4fd31003d28be6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-26mb/google/volteer/variant/lindar: Update gpio and devicetree settingsJulia Tsai
Based on schematic and gpio table of lindar, generate gpio and overridetree.cb settings for lindar. BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: Ib869eef08433dab367edd46b3dc577190b6673d8 Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2020-08-12volteer: Create lindar variantJulia Tsai
Create the lindar variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.2). BUG=b:161089195 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_LINDAR Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: I08923cde932b7304bcb01cd747530c87949e4692 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>