summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants/baseboard
AgeCommit message (Expand)Author
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
2021-01-16mb/google/volteer: do UART pad config at board-levelMichael Niewöhner
2021-01-14mainboard/volteer: Configure UsbTcPortEn valueBrandon Breitenstein
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
2020-12-11mb/google/volteer: Clean up romstage and ramstage UPDsTim Wawrzynczak
2020-12-11mb/google/volteer: Assert BT_DISABLE_L (GPP_A13) in early_gpio_tableAlex Levin
2020-12-10mb/google/volteer: Fix a few devicetree device refsTim Wawrzynczak
2020-12-08mb/google/volteer: ACPI nodes for volteer2_ti50Jes Klinke
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
2020-12-02mb/google/volteer: Add fw_config entries for boot deviceDuncan Laurie
2020-12-02mb/google/volteer: Add additional SD cards to device listDuncan Laurie
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
2020-11-24mb/google/volteer: fw_config: Add setting for new sd readersZhuohao Lee
2020-11-20mb/google/volteer: Add keyboard layout to fw_configDuncan Laurie
2020-11-20mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by defaultDuncan Laurie
2020-11-20mb/google/volteer: Enable RTD3 for SD cardDuncan Laurie
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
2020-11-02mb/google/volteer: Add DB_USB3_NO_C option for DB_USB fieldDuncan Laurie
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-10-30mb/google/volteer: Remove RIPTO support for cameraDaniel Kang
2020-10-30mb/google/volteer: Separate power resource for VCMDaniel Kang
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
2020-09-30mb/google/volteer: Update SLP_Sx assertion widths and PwrCycDurJamie Ryu
2020-09-29mb/google/volteer: Add "i2c-allow-low-power-probe" property forDaniel Kang
2020-09-25mb/google/volteer: Wake on AC connect and disconnectAbe Levkoy
2020-09-24mb/google/volteer: Enable CnviBtAudioOffloadJohn Zhao
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
2020-09-14mb/google/volteer: Fix GPP_E12 definitionCaveh Jalali
2020-09-14mb/google/volteer: Refactor baseboard devicetreeTim Wawrzynczak
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-08-31mb/google/volteer: add GPP_F11 to baseboard gpio_tableNick Vaccaro
2020-08-17mb/google/volteer: Make devicetree default as Aux Orientation retimer controlledBrandon Breitenstein
2020-08-14mb/google/volteer: Only enable TBT root ports if USB4 is supportedBrandon Breitenstein
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
2020-07-29mb/google/volteer: Update TCSS D3Hot and D3Cold configurationJohn Zhao
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
2020-07-25soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKUSumeet R Pawnikar
2020-07-18mb/google/volteer: Update DPTF with temp sensor 3Tim Wawrzynczak
2020-07-15mb/google/volteer: Enable SATA Port Dito ConfigShaunak Saha
2020-07-14mainboard/volteer: Enable SaGv for volteer2, delbin & voxelShreesh Chhabbi
2020-07-12mb/google/volteer: Convert static ASL files to new DPTF implementationTim Wawrzynczak
2020-07-07mb/google/volteer: Change ov2740 HID of Chrome driver to match withDaniel Kang
2020-07-07mb/google/volteer: Fix world-facing camera LED is always on issueDaniel Kang
2020-07-06mb/google/volteer: Enable HotPlug on PCIe root port for the SD expressnick_xr_chen
2020-06-30mb/google/volteer: set tcc_offset value to 10Sumeet R Pawnikar
2020-06-25mb/google/volteer: Enable HECI interfaceJamie Ryu
2020-06-22mb/google/volteer: move volteer devices to overridetree.cbNick Vaccaro
2020-06-22mb/google/volteer: update fw_config definitionNick Vaccaro
2020-06-22mb/google/volteer: Disable D3Cold for TCSS along with pass through modeJohn Zhao
2020-06-22mb/google/volteer: Override power limits with SKU-specific limitsTim Wawrzynczak
2020-06-22mb/google/volteer: Change VCM and EEPROM configs for ov8856Daniel Kang
2020-06-17mb/volteer: Set IomTypeCPortPadCfg default to 0x09000000Brandon Breitenstein
2020-06-14mb/google/volteer: Enable thermal sensor 4 in DPTF for volteerDeepika Punyamurtula
2020-06-12mb/google/volteer: Customize PCH VR settings for better Sx power savingsVenkata Krishna Nimmagadda
2020-06-11mb/google/volteer: Update DPTF TSR2 sensor ID for volteerDeepika Punyamurtula
2020-06-09mb/google/volteer: move volteer-specific GPIOs to variant gpio.cNick Vaccaro
2020-06-02mb/google/volteer: Add firmware configuration tableDuncan Laurie
2020-06-02mb/google/volteer: Reorganize audio codecsDuncan Laurie
2020-06-02mb/google/volteer: Enable TCSS DMA0 for VolteerJohn Zhao
2020-05-26soc/intel/tigerlake: Remove MIPI clock setting from devicetreeSrinidhi N Kaushik
2020-05-26mb/google/volteer: Enable D3HotEnable and D3ColdEnable for VolteerJohn Zhao
2020-05-26mb/google/volteer: Enable ELAN trackpad wake suspend functionWilliam Wei
2020-05-20tigerlake: enable DPTF functionality for volteerSumeet R Pawnikar
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
2020-05-20mb/google/volteer: Fix camera dsdt config for ov2740Daniel Kang
2020-05-20mainboard/volteer: Update Aux settings for Port 0Brandon Breitenstein
2020-05-18mb/ripto: Update ALC5682 headset interrupt configurationsShaunak Saha
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-15mb/google/volteer: Add delay to WWAN GPIO init sequenceAlex Levin
2020-05-13mb/google/volteer: Enable keyboard backlight featureAngel Pons
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-06soc/intel/tgl: Synchronize GPIO ASL table with Linux kernelShaunak Saha
2020-04-30mb/google/voteer: Enable DevSlp for SATA port1Wonkyu Kim
2020-04-28mb/google/volteer: move mipi_camera.asl to variants foldersNick Vaccaro
2020-04-27mb/google/volteer: add touchscreen entry to VolteerAlex Levin
2020-04-20soc/intel/tigerlake: Update iDisp Link UPD settingsSrinidhi N Kaushik
2020-04-20mb/google/volteer: add ec device entry to devicetreeNick Vaccaro
2020-04-20mb/google/volteer: Update devicetree based on EDSWonkyu Kim
2020-04-14mb/google/volteer: Enable RP LTR settingWonkyu Kim
2020-04-14mb/google/volteer: fix CROS_GPIO_WP_AH exportNick Vaccaro
2020-04-13mb/google/volteer: enable Early Command TrainingSrinidhi N Kaushik
2020-04-02soc/intel/tigerlake: Reorganize memory initialization supportFurquan Shaikh
2020-04-01soc/intel/tigerlake: Remove Jasper Lake SoC referencesAamir Bohra
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
2020-03-11mb/google/volteer: Enable pcie rp11 for optaneVenkata Krishna Nimmagadda
2020-03-11mb/google/volteer: Disable WWAN PCIeAlex Levin
2020-03-10mb/google/volteer: set TcssXhciEn to 1Brandon Breitenstein