summaryrefslogtreecommitdiff
path: root/src/mainboard/google/storm
AgeCommit message (Collapse)Author
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
The gpio table is only used by depthcharge, and depthcharge rarely has a need for the "recovery" gpio. On a few boards it does use the gpio as a signal for confirming physical presence, so on that boards we'll advertise the board as "presence". All these strings probably should have been #defines to help avoid typos (e.g., the "ec_in_rw" in stout seems questionable since everybody else uses "EC in RW"). Cq-Depend: chromium:1580454 BUG=b:129471321 BRANCH=None TEST=Local compile and flash (with corresponding changes to depthcharge) to 2 systems, one with a "presence" gpio and another without. Confirmed that both systems could enter dev mode. Change-Id: Id6d62d9e48d3e6646cbc1277ea53f0ca95dd849e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11chromeos: clean up "recovery" and "write protect" GPIOsJoel Kitching
The "write protect" GPIO's cached value is never actually read after entering depthcharge. Ensure the value from get_write_protect_state() is being transferred accurately, so that we may read this GPIO value in depthcharge without resampling. The cached value of the "recovery" GPIO is read only on certain boards which have a physical recovery switch. Correct some of the values sent to boards which presumably never read the previously incorrect value. Most of these inaccuracies are from non-inverted values on ACTIVE_LOW GPIOs. BUG=b:124141368, b:124192753, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ic17a98768703d7098480a9233b752fe5b201bd51 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
When <symbols.h> was first introduced, it only declared a handful of regions and we didn't expect that too many architectures and platforms would need to add their own later. However, our amount of platforms has greatly expanded since, and with them the need for more special memory regions. The amount of code duplication is starting to get unsightly, and platforms keep defining their own <soc/symbols.h> files that need this as well. This patch adds another macro to cut down the definition boilerplate. Unfortunately, macros cannot define other macros when they're called, so referring to region sizes as _name_size doesn't work anymore. This patch replaces the scheme with REGION_SIZE(name). Not touching the regions in the x86-specific <arch/symbols.h> yet since they don't follow the standard _region/_eregion naming scheme. They can be converted later if desired. Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-22reset: Convert individual boards to `board_reset()`Nico Huber
Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-08mb/google: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8e549e4222ae2ed6b9c46f81c5b5253e8b227ee8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
This patch switches the board_id and ram_code helper framework to use weak functions rather than Kconfigs to determine whether the board supplies these IDs. This cuts down on the amount of boilerplate Kconfigs many boards have to set and also gives them more flexibility, such as being able to determine at runtime whether a given ID is present. Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22695 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-07boardid: Minor clean up and standardizationJulius Werner
Merge the different coreboot table strapping ID structures into one because they're really just all the same, and I want to add more. Make the signature of the board_id() function return a uint32_t because that's also what goes in the coreboot table. Add a printk to the generic code handling strapping IDs in ramstage so that not every individual mainboard implementation needs its own print. (In turn, remove one such print from fsp1_1 code because it's in the way of my next patch.) Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23src/mainboard: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: Ia5a9acae4fbe2627017743106d9326a14c99a225 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-17mb/google: Add Chromebook marketing namesJonathan Neuschäfer
It's sometimes hard to find the code name of a Chromebook. Add the marketing names to Kconfig, since they are easily available. Information (mostly) taken from: https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices Unknown boards (unreleased, etc.): * Fizz * Foster * Nasher, Coral * Purin * Rotor * Rowan * Scarlet, Nefario * Soraka * Urara * Veyron_Rialto Baseboards: * Glados * Gru * Jecht * Kahlee * Nyan * Oak * Poppy * Rambi * Zoombini White label boards: * Enguarde * Heli * Relm, Wizpig TODO: How does this interact with the board_status code? Change-Id: I20a36e23bd3eea8c526a0b3b53cd676cebf9cd86 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-07-06mainboard/[g-l]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I1f906c8c465108017bc4d08534653233078ef32d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28qualcomm/storm: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15894 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-13mainboard/google: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: Ied67c5079a7f49594edb39caf61fe7f386c3f80d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14323 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-05chromeos.fmd: Mark RW_LEGACY as CBFSPatrick Georgi
Change the existing chromeos.fmd files and the dts-to-fmd script to mark RW_LEGACY as CBFS, so it's properly "formatted". BUG=chromium:595715 BRANCH=none TEST=none Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4 Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/336403 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14240 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
A long time ago many Chrome OS boards had pages full of duplicated boilerplate code for the fill_lb_gpios() function, and we spent a lot of time bikeshedding a proper solution that passes a table of lb_gpio structs which can be concisely written with a static struct initializer in http://crosreview.com/234648. Unfortunately we never really finished that patch and in the mean time a different solution using the fill_lb_gpio() helper got standardized onto most boards. Still, that solution is not quite as clean and concise as the one we had already designed, and it also wasn't applied consistently to all recent boards (causing more boards with bad code to get added afterwards). This patch switches all boards newer than Link to the better solution and also adds some nicer debug output for the GPIOs while I'm there. If more boards need to be converted from fill_lb_gpio() to this model later (e.g. from a branch), it's quite easy to do with: s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/ Based on a patch by Furquan Shaikh <furquan@google.com>. BUG=None BRANCH=None TEST=Booted on Oak. Ran abuild -x. Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14226 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-03-30storm: Fix compilation errorFurquan Shaikh
Somehow the missing header file in https://review.coreboot.org/#/c/14182 did not trigger compilation errors before. Add the required header file to enable proper compilation of storm. Change-Id: I83c8f2b5fc41e38c1385ff405370753e6eba2abc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14185 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-29ipq806x/storm: Return NULL for cbmem_top if DRAM is not initializedFurquan Shaikh
DRAM initialization on storm requires ipq blobs to be loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is initialized and contains selected region info, else it falls back to vboot work buffer. Since cbmem_find calls into cbmem_top to identify the location of cbmem area, board/chipset is expected to return NULL until the backing store is ready, which in this case until DRAM is initialized in romstage, return NULL for cbmem_top. Change-Id: I1880ce61dcfdabaa527d7a6dcc3482dfe5d5fd17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-25google/intel mainboards: Add missing board_info.txt filesMartin Roth
The lint script didn't catch that these mainboard directories didn't have board_info files. Add all missing board_info.txt files Change-Id: Ib1d61a3c04e91b22480527885faf60c22093d98a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14117 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
This makes the test IDs the default, taken from depthcharge master (board/*/fmap.dts, hwid property). Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13634 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
These are generated from depthcharge's board/*/fmap.dts using the dts-to-fmd.sh script. One special case is google/veyron's chromeos.fmd, which is used for a larger set of boards - no problem since the converted fmd was the same for all of them. Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT region ends up at the beginning of flash). This becomes necessary because we're working without a real cbfs master header (exists for transition only), which carved out the space for the offset. Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-08-27google/storm/Kconfig: remove select CONSOLE_CBMEM_DUMP_TO_UARTMartin Roth
This seems like more of a debug option, than something that should be forced to be enabled by the platform. Since it's causing a Kconfig warning, I'm just removing it. The alternative to removing it would be to add dependencies on CONSOLE_CBMEM && !CONSOLE_SERIAL Change-Id: Ifc4e4cbeea08a503c38827dd75e0e2e78e8a5eda Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11343 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the mainboards that use them. Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-03storm: Enable DRIVER_UART since we use CONSOLE_CBMEM_DUMP_TO_UARTStefan Reinauer
This fixes the build with CONSOLE_CBMEM_DUMP_TO_UART. Change-Id: Ibe79239c5799a5c4a08ed195fce4d0c63d629ca4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10769 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30google/storm: romstage needs the accessor functions for buttonsPatrick Georgi
In Chrome OS mode, the romstage tries to interpret the various buttons on the device, so it needs access to the accessor functions. Change-Id: I59a4f892ca84d475d8f46c8f8c1906dae10ad32d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30qualcomm/ipq806x: centralize vboot configurationPatrick Georgi
vboot configuration (separate stage or not, which stage loads romstage) depends on SoC properties (eg. amount of SRAM), not on board specifics, so move this part of the configuration to the SoC. Change-Id: I70b4cd1794ddf2aba7cdae94859ea1d76ae019f4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10702 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere (with no overlap), and never read. Remove it. Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10254 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-04-27storm: enable CBMEM console dumpVadim Bendebury
This patch enables on storm the recently introduced 'console buffer dump on reboot' capability. BRANCH=none BUG=chromium:475347 TEST=generated storm image with serial console disabled and both rw firmware A and B sections corrupted. Programmed the new image on an SP5 device and rebooted it. Observed the device dump cbmem console buffer to the serial output, terminating with VB2:vb2_fail() Need recovery, reason: 0x3 / 0xa Reboot requested (1008000a) Saving nvdata SF: Detected S25FL128S_256K with page size 10000, total 2000000 and the LED ring started flashing indicating recovery mode. Change-Id: Idb50c86f59f393c783ccbc15de8f5564e2a1b38e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0ec88001b152bb9f1d7268b83367131b004816f8 Original-Change-Id: I9345eeb4d375f42fb1e4c617495b63b308ce51d9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/265295 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9986 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-22google/storm: indicate start of normal boot on LED ringVadim Bendebury
Instead of switching off the LED ring for the normal boot path, turn it on with the dedicated pattern, indicating that the device firmware has started executing. BRANCH=storm BUG=chrome-os-partner:39044 TEST=program the new firmware on an SP5 device and verify that the new 'normal boot' pattern is displayed in all following scenarios: - power up the device (the pattern shows within the first second) - boot the device to bash prompt and restart. - press the recovery button and reboot the device. Once the LED ring shows the 'recovery button pressed' pattern, release the recovery button. Change-Id: Iedd66d2575ad587af77e35d23efb22a83a92858b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 092358bd17a323d0bd2fec555f43cb587486bbec Original-Change-Id: I24de45326eab83b57bcf16b5598388f81c7d0f00 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/265536 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9923 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-22google/storm: enable zero page access protection.Deepa Dinamani
BRANCH=storm BUG=chrome-os-partner:24786 TEST=verified mmu.pagetable.list output for Storm: _______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________| C:00000000--00000FFF| | | | | | | | | C:00001000--000FFFFF| A:00:00001000--000FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:00100000--29FFFFFF| A:00:00100000--29FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:2A000000--2A05FFFF| A:00:2A000000--2A05FFFF| ns| 00| 00001000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:2A060000--2A0FFFFF| A:00:2A060000--2A0FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:2A100000--3FFFFFFF| A:00:2A100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:40000000--59FFFFFF| A:00:40000000--59FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:5A000000--5A1FFFFF| A:00:5A000000--5A1FFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:5A200000--7FFFFFFF| A:00:5A200000--7FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:80000000--FFFFFFFF| | | | | | | | | Change-Id: I08a5094b2da9d67244c94984e2da14399e477b01 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f137a589434b09055e6b9d32907e662e6c296502 Original-Change-Id: Ia2deab1cf8f08c4ba5a5b6dbe4c4ebf29c9df480 Original-Signed-off-by: Vikas Das <vdas@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/253801 Original-Tested-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Deepa Dinamani <deepad@codeaurora.org> Reviewed-on: http://review.coreboot.org/9920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22storm: add config option to clear dev mode state on recoveryVadim Bendebury
Storm and whirlwind devices should leave developer mode as soon as recovery is requested. BRANCH=storm BUG=chrome-os-partner:36059 TEST=with the rest of the patches applies observed desired behavior on SP5 Change-Id: I3e8e481f85cd067eff4fe2049b8aa47e09f6d63e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c6dbafc16edb11ec687359b25098ce8a1b055b91 Original-Change-Id: Iac6fa62229556bc7a6960d7f1630d37570ba72c4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/261621 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9879 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/storm: enable virtual development mode switchVadim Bendebury
The whirlwind device is using a button instead of the switch to enable dev mode. BRANCH=storm BUG=chrome-os-partner:36059 TEST=with the rest of the patches applied it is possible to enable and disable dev mode on Whirlwind and the mode persists over reboots. Change-Id: I6d31c8429ea0515bea2b7d707325d9092487048a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 495bd07e3a1d6c587a5f01efa2801d2c4e7edbe8 Original-Change-Id: I8879833ca13074e8275393c3b98df06d56a5361d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/261416 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9875 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22i2c/ww_ring: decouple LED display from vbootVadim Bendebury
The patterns displayed on the LED ring while under the coreboot control are not driven by the vboot, but by the board code instead, The four distinct states of the LED display are: - all off - recovery button push detected, waiting for it to be released - wipeout request pending - recovery button was pushed long enough to trigger this request - recovery request pending - recovery button was pushed long enough to trigger this request. BRANCH=storm BUG=chrome-os-partner:36059 TEST=no functional changes Change-Id: I38d9a3028013b902a7a67ccd4eb1c5d533bf071c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bdfff0e646283da6a2faaacf33e0179d2fea221c Original-Change-Id: Ie279151b6060a2888268a2e9a0d4dc22ecaba460 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/260649 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9868 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/storm: support factory reset (wipeout) requestVadim Bendebury
The recovery switch on storm is overloaded: it needs to be pressed for a certain duration at startup to signal different requests: - keeping it pressed for 8 to 16 seconds after startup signals the need for factory reset (wipeout); - keeping it pressed for longer than 16 seconds signals the need for Chrome OS recovery. This patch adds a function to report the wipeout request status and enables the new feature on Storm. BRANCH=storm BUG=chrome-os-partner:37219 TEST=verified that keeping the recovery button pressed between 8 and 16 seconds at startup results in the wipeout request generated (crossystem 'wipeout_request' returns 1). Keeping the button pressed for more than 16 seconds triggers recovery mode. Change-Id: I17131593e12833866a22837271feb0e6989e6750 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c503ec13c2b096d4a21fb299c0dd0396f1d01e9 Original-Change-Id: Ic3678217906e56307d47378fa8a6defeb314084e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/259844 Reviewed-on: http://review.coreboot.org/9863 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-22google/storm: use whirlwind LED ring on SP5 boardsVadim Bendebury
The latest whirlwind requirements call for the need to indicate different device states while it is still in coreboot (it could be waiting for recovery or for factory reset trigger). Initialize the LED ring when running on the SP5 hardware (which is the first proper Whirlwind device). BRANCH=storm BUG=chrome-os-partner:36059 TEST=when the device starts the LED ring gets shut down Change-Id: I9dd0bca4849a2a8500322c84c7351aeef00d862e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24e4da56d4c43d03f235d0cfd5995ef235e6a2c5 Original-Change-Id: Ica37301aa27f35897d2bf467ae319fb5e68adc1d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258271 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9859 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/*: Add MAINBOARD_HAS_CHROMEOS where appropriatePatrick Georgi
Some recently upstreamed boards are missing this flag Change-Id: I89d73970f23eed6ea127e620c38f9687b2f5b048 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9949 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-22switch mainboards over to use BOARD_ID_AUTOStefan Reinauer
This patch switches the mainboards with board id straps to use BOARD_ID_AUTO instead of BOARD_ID_SUPPORT. On urara, which does not have those straps, the option is removed. (And re-added for urara derivatives through setting the config option BOARD_ID_MANUAL BRANCH=none BUG=chrome-os-partner:37593 TEST=emerg-nyan_big coreboot, emerge-urara coreboot, emerge-buranku coreboot Change-Id: I5ac4024c6f1f9b9d7a5179d88722c69b23b82bbd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 22a470698f9c9ed275aa8150a5bb8d8cf368b050 Original-Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Change-Id: I48c291ad6f255a28c833bebc2638bfafa2782e74 Original-Reviewed-on: https://chromium-review.googlesource.com/262935 Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com> Reviewed-on: http://review.coreboot.org/9906 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21storm: print uber-sbl informationVadim Bendebury
Process information reported by uber-sbl: print out its version and RPM and KRAIT log contents. BRANCH=storm BUG=chrome-os-partner:30623 TEST=rebooted a storm device, checked out /sys/firmware/log after booting up Chrome OS: localhost ~ # head -29 /sys/firmware/log | tail -15 Uber-sbl version: @vbendeb-AAABANAZA Section 0 log: 0 :00:SBL1, Start 0 :00:SBL-RO Krait 2623 :00:SBL-RO Krait 0 :00:BB 4666 :00:BB 0 :00:sbl1_hw_init, Start 6130 :00:sbl1_hw_init, Delta 0 :00:SBL1, End 15372:00:SBL1, Delta Section 1 log: 0 :00:SBL-RO Krait, Start 0 :00:SBL-RO Krait, End 336 :00:SBL-RO Krait, Delta localhost ~ # Change-Id: I524dbb49f676046a43bfba26b31b2834c8d2769c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dcabca6eb87dcead0c9c33749ed76ac939d843c1 Original-Change-Id: Ic037f936ff2d09b0346fb5239094e7928dfd7620 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/252830 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com> Reviewed-on: http://review.coreboot.org/9843 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-17storm: Add STM flash supportVadim Bendebury
Compile in support for the STM flash devices. BRANCH=storm BUG=chrome-os-partner:33489 TEST=verified that both spansion and stm flash devices boot as expected. Change-Id: Ib616b2b52d29b20b4447c92115181a92c524ac39 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 34c0147b45551e9161e3f0e342a753907f27f9ae Original-Change-Id: I922afb91cc3ac5bf459d9746817d7677986b93cd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/248993 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17storm: handle dual purpose recovery buttonVadim Bendebury
Storm devices' recovery button is overloaded. Pressing it when the system is running is supposed to reset the device. To trigger recovery mode the button must be held pressed for at least 5 seconds after reset. Currently interpreting the recovery button state is the responsibility of the board (vboot gets a consolidated state, which is a combination of several conditions), so the simplest way to implement this feature is to make the board follow the recovery button state. In case the button is not pressed when it is first sampled, its state is saved immediately and no recovery request is reported. In case the button is pressed when it is first sampled, the board code keeps polling it up to 5 seconds and acts accordingly. BRANCH=storm BUG=chrome-os-partner:36059 TEST=tried starting a whirlwind with recovery button pressed for various durations, it entered recovery mode when the button was pressed longer than 5 seconds. Change-Id: Icb3250be7c2a76089c070acd68cb521d1399e245 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 45e7265bc760944f93dd98903d39d2b30aa96365 Original-Change-Id: Iab3609ebce3a74e3d0270775b83f3cf03a8837ca Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/251711 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/9761 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: extend GSBI driver to support i2c on any GSBI blockSourabh Banerjee
The GSBI driver is extended to be able to program the CTRL reg for any given GSBI block. The NS and MD registers programming is made more readable by programming the M, N, D and other bits of the registers individually. Defined configure structs for each QUP block to be able to track the init status for each qup. Configured GPIO8 and GPIO9 for I2C fuction. BRANCH=chromeos-2013.04 BUG=chrome-os-partner:36722 TEST=Booted up storm P0.2, verified that the TPM on GSBI1 still works. Change-Id: I17906beedef5c80267cf114892080b121902210a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07bc79211770decc1070c3a88874a4e452b8f5bc Original-Change-Id: I841d0d419f7339f5e5cb3385da98786eb18252ad Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/250763 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Trybot-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: add LPASS clock control driverVadim Bendebury
Add a clock control driver to initialize the clock tree inside the low-power audio subsystem. Depthcharge builds up on this to enable audio function on storm. The clock is hardcoded for 48KHz frame rate, two 16 bit channels. BRANCH=storm BUG=chrome-os-partner:35247 TEST=with depthcharge patches applied and Using depthcharge CLI audio test program verified that the target generates sensible sounds audio 100 100 audio 1000 5000 Change-Id: I56513fc782657ade99b6e43b2d5d3141d27ecc4e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0d4f408408aa38b2f0ee19b83ed490de39074760 Original-Change-Id: If8ffc326698fcea17e05d536930d927ca553481f Original-Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/248830 Original-Reviewed-by: Dylan Reid <dgreid@chromium.org> Reviewed-on: http://review.coreboot.org/9758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17ipq806x: Add support for mmu in bootblock.Deepa Dinamani
move mmu setup from RAM stage to boot block Enabling mmu earlier, helps speed up the boot time. BRANCH=storm BUG=chrome-os-partner:35024 TEST=Verified the mmu table dump matches the programmed values. Change-Id: I8f581538d5dfd0d78538c9fe50f689d54b740685 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fb799a6d61f9c2f478434a71584d0edb94af4b59 Original-Change-Id: I110497875002a88add7eb4312a70c0de8c28bc4f Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Trevor Bourget <tbourget@codeaurora.org> Reviewed-on: http://review.coreboot.org/9756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: load and start RPMVadim Bendebury
This patch finds the RPM image in the CBFS, loads it as defined by the MBN header and signals to the RPM processor where the image is located and waits for confirmation of the RPM starting. The interactions with the RPM processor are copied as is from the vendor provided sample code. Debug messages added to help identify problems with loading the blobs, should they ever happen. BRANCH=storm BUG=chrome-os-partner:34161 TEST=ramstage reports both TZBSP and RPM starting. Change-Id: I81e86684f9d1b614f2059ee82c6561f9484605de Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bbf2eda04a6e72b4f7b780f493b5a1cea0abfeb7 Original-Change-Id: Ic10af0744574c0eca9b5ab7567808c1b8d7fe0c2 Original-Signed-off-by: Vikas Das <vdas@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236661 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Reviewed-on: http://review.coreboot.org/9692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
Use the apps processor watchdog reset to do a hard reset. The watchdog reset drives the RESETOUT on the chip. Modify register address definitions to be able to use pointers and pointer arithmetics. BRANCH=storm BUG=chrome-os-partner:34334 TEST=the chip resets and the control returns to start of SBL. Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91 Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236141 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Reviewed-on: http://review.coreboot.org/9691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
Read the TZBSP blob from CBFS and run it. A side effect of the blob execution is switching the processor into User mode. Starting TZBSP requires processor running in Supervisor mode, TZBSP code is compiled for ARM. Coreboot is executing in System mode and is compiled for Thumb. An assembler wrapper switches the execution mode and interfaces between Thumb and ARM modes. BUG=chrome-os-partner:34161 BRANCH=Storm TEST=manual With the preceeding patches the system successfully loads to depthcharge in recovery mode. Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2 Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948 Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229026 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: adjust rombase startup to vboot2Vadim Bendebury
Memory needs to be initialized before rombase proceeds. BRANCH=storm BUG=chrome-os-partner:34161 TEST=boots into depthcharge Change-Id: Id16b17685ff15c2a69d630eb8042e15549ae8b21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e8aeb38206b806d5656052d0f210faa769e28b8 Original-Change-Id: I0616c7dc7f08332ac0d96d4baf2618b067606fdf Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234544 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9689 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor) and ddr.mbn (actual memory initialization code). Pointer to CDT which starts right above the MBN header is passed to the memory initialization routine. Zero return value means memory initialization succeeded. BRANCH=storm BUG=chrome-os-partner:34161 TEST=with upcoming patches memory initialization succeeds. Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234644 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: add i2c driverVadim Bendebury
this change ports i2c and other relevant drivers from depthcharge for ipq806x. BUG=chrome-os-partner:33647 BRANCH=ToT TEST=Booted storm using vboot2 Change-Id: I3d9a431aa8adb9b91dbccdf031647dfadbafc24c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a0c615d0a49fd9c0ffa231353800882fff6ab90b Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Id7cc3932ed4ae54f46336aaebde35e84125ebebd Original-Reviewed-on: https://chromium-review.googlesource.com/229428 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
This change sets up the list of source files for vboot2's verstage without enabling it. BRANCH=storm BUG=chrome-os-partner:34161 TEST=not much testing yet, just successful compilation. Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364 Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234643 Reviewed-on: http://review.coreboot.org/9684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: add code for detecting rec/dev/write protect switches' statusDaisuke Nojiri
The gpio access code has been moved to a separate file to match other platforms. Accessor functions are added to read different switches state. They will be read by verstage, when it is enabled, and by ramstage, for passing the values to depthcharge. It is unfortunate that the gpio values are not being cached and can change by the time CBMEM table is filled, but we have to live with that for now. BUG=chrome-os-partner:33756,chrome-os-partner:34161 BRANCH=storm TEST=none yet. Change-Id: I229fed0e35d643912f929671d5fc25aee5d1d167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e15aa281a1dbf2c463650b6c04991436022d8d4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I940b54cd3cf046b94d57d59d370e634a70a8bbeb Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229426 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9681 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
We have known for a while that the old x86 model of calling init_timer() in ramstage doesn't make sense on other archs (and is questionable in general), and finally removed it with CL:219719. However, now timer initialization is completely buried in the platform code, and it's hard to ensure it is done in time to set up timestamps. For three out of four non-x86 SoC vendors we have brought up for now, the timers need some kind of SoC-specific initialization. This patch reintroduces init_timer() as a weak function that can be overridden by platform code. The call in ramstage is restricted to x86 (and should probably eventually be removed from there as well), and other archs should call them at the earliest reasonable point in their bootblock. (Only changing arm for now since arm64 and mips bootblocks are still in very early state and should sync up to features in arm once their requirements are better understood.) This allows us to move timestamp_init() into arch code, so that we can rely on timestamps being available at a well-defined point and initialize our base value as early as possible. (Platforms who know that their timers start at zero can still safely call timestamp_init(0) again from platform code.) BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit. Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234062 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9606 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13storm: Fix timer init order problemJulius Werner
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for pre-console initialization) inadvertently moved the timer initialization after console initialization for IPQ806x, which is apparently not a good idea for this platform. This patch solves the issue by moving init_timer() to bootblock_mainboard_early_init(), which is the new hook explicitly provided to perform pre-console tasks. BRANCH=None BUG=None TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was already broken. Bisected coreboot and tracked down breakage to commit a126a62f (ipq8064: use the new utility to build bootblock). Built and booted successfully with this patch and a revert of a126a62f to confirm that the bug in question here is fixed. Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52 Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233290 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9574 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13storm: add hard_reset templateDaisuke Nojiri
this is required to do early firmware selection using vboot2. actual implementation can be done later. BUG=chrome-os-partner:33755 BRANCH=ToT TEST=Booted storm. Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8 Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229425 Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10storm: copy WiFi calibration data in the CBMEMVadim Bendebury
Invoke the function which copies WiFi calibration data in a CBMEM table. BRANCH=storm BUG=chrome-os-partner:32611 TEST=verified that the WIFI entry is added to CBMEM when the calibration data is present in the VPD. Change-Id: Icab0a2343e88e1d44575eeb608fdf6588aff255b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 68b96f158633cb3a1f157b5a19da39fa7e78f975 Original-Change-Id: I5fa77da98e37b88da01fb7884e713535fc178006 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9543 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
This deprecates TERTIARY_BOARD_ID. Instead, a board will set BOARD_ID_SUPPORT (the ones affected already do) which will set GENERIC_GPIO_SUPPORT and compile the generic GPIO library. The user is expected to handle the details of how the ID is encoded. BUG=none BRANCH=none TEST=Compiled for peppy, nyan*, storm, and pinky Change-Id: Iaf1cac6e90b6c931100e9d1b6735684fac86b8a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93db63f419f596160ce2459eb70b3218cc83c09e Original-Change-Id: I687877e5bb89679d0133bed24e2480216c384a1c Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228322 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9413 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
This patch makes a few cosmetic changes: - Rename tristate_gpios.c to gpio.c since it will soon be used for binary GPIOs as well. - Rename gpio_get_tristates() to gpio_base3_value() - The binary version will be called gpio_base2_value(). - Updates call sites. - Change the variable name "id" to something more generic. BUG=none BRANCH=none TEST=compiled for veyron_pinky and storm Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228324 Reviewed-on: http://review.coreboot.org/9411 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10google/storm: Minor board ID changesDan Ehrenberg
- Add the Whirlwind board ID to the enum - Replace comparisons of the board ID with 0 to the proto0 constant TEST=Booted Storm with this coreboot version BUG=none BRANCH=none Change-Id: I53be0b06c3444936a8bd67653e03b93bcb87e328 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e055ef27ef1e07be09d80b2298384889214bf0d Original-Change-Id: I75c7c98732c3d4569611de54d7aa149dd3b0fb7d Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225460 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9404 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10storm: Initialize clock, pinmux for NAND if present on boardDan Ehrenberg
This patch runs basic NAND initialization code on Proto 0.2 boards which have been reworked for NAND. It makes sense to do this in coreboot for two reasons: - In general, it is reasonable for coreboot to initialize clocks and such in preparation for depthcharge's use. Waiting times can be pooled, and the initialization itself here is very fast. - There is a kernel bug which requires that the clock is already initialized before the kernel loads NAND support. coreboot is a more sensible place to put a workaround than depthcharge because depthcharge initializes things lazily, but when booting from USB, depthcharge won't need to look at NAND. This change involves bringing in an additional header file, ebi2.h, from U-Boot. TEST=Booted a kernel from USB and verified that NAND came up without any depthcharge hacks, whereas previously a USB-booted kernel would be unable to access NAND even with the same drivers compiled in due to an initialization failure. BUG=chromium:403432 BRANCH=none Change-Id: I04e99cb39d16848a6ed75fe0229b8f79bdf2e035 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9be29da5ccad9982f146ae00344f30598ef2371c Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Change-Id: I1760ecb4e47438311d80e34326e45578c608481c Original-Reviewed-on: https://chromium-review.googlesource.com/225277 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9402 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
The function to read board IDs from tristate GPIOs currently supports two output modes: a normal base-3 integer, or a custom format where every two bits represent one tristate pin. Each board decides which representation to use on its own, which is inconsistent and provides another possible gotcha to trip over when reading unfamiliar code. The two-bits-per-pin format creates the additional problem that a complete list of IDs (such as some boards use to build board-ID tables) necessarily has "holes" in them (since 0b11 does not correspond to a possible pin state), which makes them extremely tricky to write, read and expand. It's also very unintuitive in my opinion, although it was intended to make it easier to read individual pin states from a hex representation. This patch switches all boards over to base-3 and removes the other format to improve consistency. The tristate reading function will just print the pin states as they are read to make it easier to debug them, and we add a new BASE3() macro that can generate ternary numbers from pin states. Also change the order of all static initializers of board ID pin lists to write the most significant bit first, hoping that this can help clear up confusion about the endianness of the pins. CQ-DEPEND=CL:219902 BUG=None TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush, Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure. Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219901 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9401 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
We've had gpiolib.h which defines a few common GPIO access functions for a while, but it wasn't really complete. This patch adds the missing gpio_output() function, and also renames the unwieldy gpio_get_in_value() and gpio_set_out_value() to the much easier to handle gpio_get() and gpio_set(). The header is renamed to the simpler gpio.h while we're at it (there was never really anything "lib" about it, and it was presumably just chosen due to the IPQ806x include/ conflict problem that is now resolved). It also moves the definition of gpio_t into SoC-specific code, so that different implementations are free to encode their platform-specific GPIO parameters in those 4 bytes in the most convenient way (such as the rk3288 with a bitfield struct). Every SoC intending to use this common API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most 4 bytes in length. Files accessing the API only need to include <gpio.h> which may pull in additional things (like a gpio_t creation macro) from <soc/gpio.h> on its own. For now the API is still only used on non-x86 SoCs. Whether it makes sense to expand it to x86 as well should be separately evaluated at a later point (by someone who understands those systems better). Also, Exynos retains its old, incompatible GPIO API even though it would be a prime candidate, because it's currently just not worth the effort. BUG=None TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and Veyron_Pinky. Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220975 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9400 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10storm: retrieve MAC address from VPDVadim Bendebury
Retrieving MAC address from VPD should be the board responsibility, add a call to the recently introduced function. BRANCH=storm BUG=chromium:417117 TEST=verified that MAC addresses still show up in the device tree on storm Change-Id: Ib8ddc88ccd859e0b36e65aaaeb5c9473077c8c02 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 285cb256e619ef41c7f11680b3fa5310b1d93cf1 Original-Change-Id: I3913b10a425d8e8621b832567871ed4861756381 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/223797 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9399 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-08ipq806x: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns ipq806x to the new SoC header include scheme. Also alphabetized headers in affected files since we touch them anyway. BUG=None TEST=Tested with whole series. Compiled Storm. Change-Id: Icb81a77e6f458625f5379a980e8760388dd3a1f9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1bf23774c9ffa5d08c211f3658d39adcfa47b339 Original-Change-Id: I283cc7e6094be977d67ed4146f376cebcea6774a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224502 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9368 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Patrick Georgi <pgeorgi@google.com>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-28storm: fix SW_RESET signal polarityVadim Bendebury
The actual level required to take the ethernet switch out of reset is low, not high. BUG=chrome-os-partner:31780 TEST=with this patch applied, when proto0.2 boots, the ethernet switch's LED blink once, as was the case with proto0. Change-Id: If4004ac5c2dc837270d4cb840d96ce92021d231e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9fa69d22de901cd0843948de0f95a66a2aa99353 Original-Change-Id: I81eeb73b85cf113709b6d4ac3aa7639a40fa6719 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/217416 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-28storm: deassert SW_RESET signal at startupVadim Bendebury
The proto0.2 hardware connects gpio26 (sw reset) to the ethernet switch reset pit. The output stays low (or high-z) after power up, which holds the switch in reset. Deassert the signal at startup on hardware rev 1 and later. BUG=chrome-os-partner:31780 TEST=with this patch applied, when proto0.2 boots, the ethernet switch's LED blink once, as was the case with proto0. Change-Id: I4c5a0cc499563a33aa7d29be7767d0ec5d93c20f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6788962172c6e29e193fa3e85ca79cb83a96e154 Original-Change-Id: I81b3dccb1d1d43c5c1e6dcb5400af8eed6dee870 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/217087 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9120 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-28storm: make sure board ID is calculated only onceVadim Bendebury
Figuring out board_id on storm requires reading tertiary gpios, which takes time. Let's calculate it once and reuse it when necessary. BUG=none TEST=verified board ID reported as 0 and 1 on proto0 and proto0.2 respectively. Change-Id: I69f6afa3de8a175a1d723e95902efd15607e68b7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 080c839c1c0c1b5e389b2382144ef67535bb4ff1 Original-Change-Id: I4e237077d1d9a96daebba462cd00f3f40be14518 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/217086 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-28storm: reset TPM properly on proto0Vadim Bendebury
The proto0 storm hardware has the TPM reset line wired to the SOC GPIO22 pin instead of the system reset. This causes all kind of TPM behavior problems and requires frequent power cycles. Adding explicit TPM reset makes all those problems go away. BUG=chrome-os-partner:30705, chrome-os-partner:30829 TEST=tried resetting proto0 at different moments during boot up - the TPM does not fail anymore. Change-Id: Idfa16e6e868336f38861edeb75703fff3f35172c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d5e07815c227089b7f266ba5329812bf309b87e6 Original-Change-Id: Ia877fcd9efaf3ba12c8fe8c2958bd81c4bf22799 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/211497 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9118 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-28storm: supply vboot GPIO settings in coreboot tableVadim Bendebury
Storm provides three real and two fake gpios. To keep things simple, define them all as active low and provide appropriate values for the fake ones. BUG=chrome-os-partner:30705 TEST=with the appropriate depthcharge change booted proto0, observed appropriate behavior following the dev switch setting Change-Id: I248b90ee06d226a223b6fc0993f209acdd58c77d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d48d1dcc88df0c1bd4c50f14dd2e7cd1dd4fba5d Original-Change-Id: Icb7fb55949fa97ead9d19f0da76392ee63bbb5b8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/210922 Reviewed-on: http://review.coreboot.org/9117 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-26fix how to interpret board id read from gpiosDaisuke Nojiri
nyan blaze fails to boot because tristates of the board id are interpreted in the reverse order. this change fixes it. BUG=none TEST=Booted Blaze to Linux. Built firmware for Storm. Branch=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I4ff8a15cf62869cea22931b5255c3a408a778ed2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3f59b13d615a8985edf2029d89af05e95aefad33 Original-Change-Id: I6d81092becb60d12e1cd2a92fc2c261da42c60f5 Original-Reviewed-on: https://chromium-review.googlesource.com/211700 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/8980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-26Restore name of the function reading tertiary GPIO statesVadim Bendebury
The name was changed due to review comments misunderstanding, it should be restored to properly convey what the function does. BUG=chrome-os-partner:30489 TEST=verified that Storm still properly reports board ID Change-Id: Iba33cf837e137424bfac970b0c9764d26786be9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c0fff28c6ebf255cb9cf9dfe4c961d7a25bb13ff Original-Change-Id: I4bd63f29afbfaf9f3e3e78602564eb52f63cc487 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/211413 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8979 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23Enable publishing of board ID where supportedVadim Bendebury
These boards are supposed to be able to determine the board ID at run time based on GPIO settings. BUG=chrome-os-partner:30489 TEST=verified that all boards build. Checked that storm proto0 reports board ID of 0 on the console Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/210119 (cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733 Reviewed-on: http://review.coreboot.org/8722 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23storm: Add board ID calculation functionVadim Bendebury
storm uses three GPIOs in tertiary mode, such that proto0 returns value of 8 when the GPIOs are interpreted as a single tertiary number. Adjust the calculated value to return board ID of 0 on proto0, and monotonously incrementing values on newer boards. BUG=chrome-os-partner:30489 TEST=when enabled, the board ID value of zero is reported on the console. Original-Change-Id: I2ff8fd5cbc8d568877b6f8bf220e146893f1e4be Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/210118 (cherry picked from commit 6ba24f31583933f02be111c8767ae9df56537011) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I35ee218df35a0924d4bb8fcbc6c875450a609f24 Reviewed-on: http://review.coreboot.org/8721 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-23ipq806x: implement GPIO APIVadim Bendebury
Add implementation of the GPIO API defined in src/include/gpiolib.h. Also, clean up the GPIO driver, make it use pointers instead of integers for register address. This requires a touch in the SPI driver, where the CS GPIO is toggled and in the board function where it enables USB interface. BUG=chrome-os-partner:30489 TEST=tested with the following patches, observed proto0 properly read the board ID. Original-Change-Id: I0962947c6bb32a854ca300752d259a48e9e7b4eb Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/210115 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e951f735001509d135cc61530ed0eecb5fc31a85) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8a612dce000931835054086c1b02ebfc43dc57d2 Reviewed-on: http://review.coreboot.org/8718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-20romstages: use common run_ramstage()Aaron Durbin
Instead of sprinkling the cbfs calls around (as well as getting return values incorrect) use the common run_ramstage() to perform the necessary work to load and run ramstage. Change-Id: I37b1e94be36ef7a43efe65b2db110742fa105169 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8710 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-05storm: Provide ability to build ap148 variantVadim Bendebury
With BOARD_VARIANT_AP148 configuration option enabled the image will be built for 512MB DRAM instead of 1024MB and the mainboard_part_number field in the lb_mainboard entry will be set to "AP148" instead of "Storm". BUG=chrome-os-partner:30440 TEST=manual . built and booted both AP148 and proto0 all the way to reading the kernel . verified that the config file includes correct part number and memory size . verified proper machine IDs reportted when starting the kernel Original-Change-Id: Ie609544a460fc991e66e8b95e8d7a3ed5e845f7b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/207427 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit a80ab00f27eef9e3aa2f761659d6945d6fce2ef6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I477e672dc4f48fa9c9893bf0759704501ea07b1a Reviewed-on: http://review.coreboot.org/8590 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-01-09storm: Increase DRAM size to 1024MBDavid Hendricks
BUG=chrome-os-partner:29871 BRANCH=storm TEST=builds and boots (sort of) Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I82e1792152d17d689e129c9941e8972221bde366 Original-Reviewed-on: https://chromium-review.googlesource.com/206011 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8995fde9bdfb8af8fb86525fd67a61614881f78e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ice4a5382903b0ab6e085c39d05c46601373080eb Reviewed-on: http://review.coreboot.org/8148 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-09storm: USB fixes for proto0Vadim Bendebury
The actual storm device has a single USB interface, which needs to be explicitly turned on using GPIO51. BUG=chrome-os-partner:29871 TEST=verified that depthcharge finds and boots a kernel from USB stick Original-Change-Id: Iaf868812c96e1e3289b9403855c4cc8f87c1e368 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/205329 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> (cherry picked from commit aa22376ffac22309a298dfa844e7f61c97d57d3e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ic0f34622e61a65a0540c0f3fca26fb057fa85fb7 Reviewed-on: http://review.coreboot.org/8147 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-04ipq806x: Add USB supportJulius Werner
This patch adds code to initialize the two DWC3 USB host controllers and their associated PHYs to the IPQ806x SoC (closely imitating the existing DWC3 implementation for Exynos5), and uses them to initialize USB on the Storm mainboard. BUG=chrome-os-partner:29375 TEST=Hack up netboot to get around missing SPI flash, load a file over TFTP. Hack a storage read into the storage attach function, dump the data and confirm that it looks right. Enable USB debugging and confirm 3.0 devices get enumerated at SuperSpeed (mostly). Original-Change-Id: Iaf7b96bef994081ca222b7de9d8e8c49751d3f1d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202157 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 6349e7281d5accb1247acb0537a48fa3a5e1bf97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I749d265d45c6a807a7559bd4df2490a6eb8067af Reviewed-on: http://review.coreboot.org/8056 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
enable protection of zero page access, provide for uncached device memory range, and protect against access outside of DRAM except to device registers. BUG=chrome-os-partner:28467 TEST=verified mmu.pagetable.list output: _______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________| C:00000000--000FFFFF| | | | | | | | | C:00100000--3FFFFFFF| A:00:00100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:40000000--428FFFFF| A:00:40000000--428FFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:42900000--43CFFFFF| A:00:42900000--43CFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:43D00000--5FFFFFFF| A:00:43D00000--5FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | Original-Change-Id: If9beb10938841aead5105d662f0aef741995d708 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200341 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 09dd137453d8c6f1b60692b01226498e22f34fb2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: src/mainboard/google/storm/mainboard.c Change-Id: Idff7e3f0bc5903933e9f1b980f595666380696d1 Reviewed-on: http://review.coreboot.org/8010 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03storm: enable early consoleVadim Bendebury
Include the required modules in romstage and enable early console. BUG=chrome-os-partner:27784 TEST=observe the romstage prompt in the console output: coreboot-4.0 romstage Tue May 13 17:08:58 PDT 2014 starting... Original-Change-Id: Ie3853b9afc53246e6eb997f279ccd4dbb08f748b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199673 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 6e643d3425ee226b3ebfbf329b35e7017f83d0c3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibdc695da634356988b3e551b0a9e4be2e129ccb4 Reviewed-on: http://review.coreboot.org/7997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
Squashed the correction patch with the original to avoid confusion in coreboot.org review. All what's needed apart from configuring the feature is to provide a function which would report the top of DRAM address. BUG=chrome-os-partner:27784 TEST=manual . with all other patches applied, the image proceeds all the way to trying to download 'fallback/payload'. Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Change-Id: Ifa586964c931976df1dff354066670463f8e9ee3 Original-Reviewed-on: https://chromium-review.googlesource.com/197897 (cherry picked from commit 54fed275fe80dee66d423ddd78a071d3f063464a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> storm: initialize dynamic cbmem properly Dynamic cbmem support has been enabled on storm, but the proper initialization at romstage is missing. Proper DRAM base address definition is also necessary so that CBMEM is placed in the correct address range (presently at the top of DRAM). BUG=chrome-os-partner:27784 TEST=build boot coreboot on ap148, observe the following in the console output: Wrote coreboot table at: 5fffd000, 0xe8 bytes, checksum 44a5 coreboot table: 256 bytes. CBMEM ROOT 0. 5ffff000 00001000 COREBOOT 1. 5fffd000 00002000 Original-Change-Id: I74ccd252ddfdeaa0a5bcc929be72be174f310730 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e2aeb2f4e7f3959d5f5336f42a29909134a7ddb7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I45f7016dd510fe0e924b63eb85da607c1652af74 Reviewed-on: http://review.coreboot.org/7996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
This change forces storm platform to use the common CBFS SPI wrapper, which makes the SOC specific CBFS code unnecessary and requires including SPI controller support in all coreboot stages. BUG=chrome-os-partner:27784 TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ib468096f8e844deca11909293d90fc327aa99787 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197932 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 794418a132b5be5a2c049f28202da3cec7ce478d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I751c51c91f29da4f54fcfe05e7b9a2e8f956c4f2 Reviewed-on: http://review.coreboot.org/7994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)