summaryrefslogtreecommitdiff
path: root/src/mainboard/google/samus/devicetree.cb
AgeCommit message (Collapse)Author
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
This adds the TPM device to the devicetree and configures an active high edge triggered interrupt at IRQ10 and adds the ACPI Device for the TPM into the DSDT. It also cleans up the EC PNP ID to use the EISAID for an EC since there are now two PNP devices declared, and removes the unused ENABLE_TPM define at the top of the DSDT. BUG=chrome-os-partner:33385 BRANCH=samus TEST=build and boot on samus, ensure TPM is functional at IRQ10 CQ-DEPEND=CL:226661 Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86 Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226663 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10samus: Enable vr_slow_rampShawn Nematbakhsh
Enable slow ramp rate to reduce idle noise / crackle. BUG=None TEST=Performance/noise/power tested by others. BRANCH=Samus Change-Id: I3b0083bdb19f96fc018356bd744fdff3baaf8962 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 041fca21b863d3fd94dd5bebf89fe48f5ac74285 Original-Change-Id: Id7e55f3710304369a79150129db18300ae38f93a Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/248791 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9506 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10samus: Adjust SATA Gen3 TX voltage amplitudeDuncan Laurie
Reduce the SATA Gen3 TX voltage amplitude by 210mV based on the provided test results to help with SATA validation. BUG=chrome-os-partner:34121 BRANCH=samus TEST=build and boot on samus and ensure SATA is still working, firmware image will be provided for full validation. Change-Id: I574d2f457b7b6831a339602a4165e959a0e2ee7d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9500ec152d8f9c90513811b1a92d1a8c155f514a Original-Change-Id: I233fa1a9a7f2877a97ef6834304680f82b958e82 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/241800 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/9496 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10samus: Set current backlight PWM valueDuncan Laurie
With recent changes in the 3.14 kernel and the switch to not using X the panel backlight is not geting turned on until chrome is started which means the splash screen is not visible. If we set the backlight PWM in coreboot then it will at least turn on for the early boot process. BUG=chrome-os-partner:31549 BRANCH=samus TEST=boot on samus in normal mode and see the boot splash logo Change-Id: I81e6b90617acb181b4de3365f8f56ec3b846b78b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f850fe3faff268a64f18e6bd176ec1126b921e3b Original-Change-Id: I622bef8af9bb6b753fe228b33ecdc4aae76af131 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240853 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/9491 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-04samus: Enable GSPI0 interfaceDuncan Laurie
This will be connected to the coded for firmware upload. BUG=chrome-os-partner:33495 BRANCH=samus TEST=build and boot on samus, check that GSPI driver is loaded Change-Id: Ife41394e31af9dab03495b34609cb119525f9b19 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: bbf26154da675845251c54f71d1df9df8d2a4fd5 Original-Change-Id: I25c91145aef8ca2aef229ffb27e8a45df659982e Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228835 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9273 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-27samus: Updates for EVT boardDuncan Laurie
- Remove NFC GPIOs - Change EC wake to GPIO27 - Enable wake on HOTWORD_DET_L_3V3 - Add new Hynix memory SKU BUG=chrome-os-partner:31549 BRANCH=none TEST=emerge-samus coreboot, cannot fully test until EVT Original-Change-Id: Ia25fc39f0b67c53305b3fd9150117d6a7867eb3a Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213796 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 740ac0bb7eaa9ae35fce8a04825f9c5ecf7cab79) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2b1c194eae2ebc53291f078c00ba04f82e10b0c1 Reviewed-on: http://review.coreboot.org/8963 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
- Put SSD into reset on transition to S3/S5 to prevent leakage - Fix GPIO number for wlan disable used in smihandler - Enable generic hub driver in libpayload - Fix comment in devicetree about S0ix BUG=chrome-os-partner:28502 BRANCH=None TEST=Build and boot on samus Original-Change-Id: Idce566d0f22622d36697be54ab51cacb576c5d6d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203185 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c0dd822babee3d766eff1735687d14e63380f702) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idc2da99fce817aaf893f031ffbb4ac4a2ade31b0 Reviewed-on: http://review.coreboot.org/8048 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
Both DDI ports may be used on this board so it needs to be able to detect a device on either port. BUG=chrome-os-partner:28234 TEST=None (needs hardware) Original-Change-Id: I5fc5ec3fe887fb51e7bdeae43c8297580e0ba6d6 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202358 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 574bb6ac5d33c98f0214d6c738af24172164f4a1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I57613fcea10af0fecaf0f2ad6a83ca011c650099 Reviewed-on: http://review.coreboot.org/8046 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-04samus: Update for board revision 1.9Duncan Laurie
- Update GPIO map - Update SPD for new memory and 4-bit table decode - Enable USB3 port 3 and 4 (shared with PCIe port 1) - Enable PCIe port 3 and disable port 1 - Enable SerialIO ACPI mode for devices - Disable S0ix for now to prevent use of C10 - Special handling for memory with broadwell CPU BUG=chrome-os-partner:28234 TEST=Boot on P1.9 Original-Change-Id: If6adcc2ea76f1af7613b715133483d7661e94dd8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201083 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 35835eaed3e098597e46f602fbd646cfbb899355) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icb03808da6d92705bbc411d155c25de57c4409c6 Reviewed-on: http://review.coreboot.org/8007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
Combine four patches dependencies. These will not build individually, so combine them for coreboot.org upstream. samus: Move SPD handling to separate file The code to find the SPD data for the mainboard based on GPIOs is moved from romstage.c into spd.c. It relies on the updated pei_data structure from broadwell instead of the haswell interface. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Move PEI data structure init to separate file This needs to be executed in both romstage and ramstage for the different PEI binary stages. It uses the broadwell interface now instead of haswell. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199921 (cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Convert mainboard to use soc/intel/broadwell Switch from the haswell cpu/northbridge/southbridge interface to the soc/intel/broadwell interface. - Use new headers where appropriate - Remove code that is now done by the SOC generic code - Update GPIO map to drop LP specific handling - Update INT15 handlers, drop all but the boot display hook BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199922 (cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Add some code to print basic info from SPD The handling of LPDDR is a bit messy in Intel platforms. There is no traditional SPD so instead one is created by hand from the provided datasheets. These have varying (and sometimes unexpected) geometry and it can be important during bringup to know what configuration is being passed to the memory training code. This could in theory be put in a more generic location, but for now this is the only board with LPDDR3 where I have found it valuable. BUG=chrome-os-partner:28234 TEST=Build and boot on samus, look for SPD details on the console. CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199923 (cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d Reviewed-on: http://review.coreboot.org/7943 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-18samus: Enable XHCI mode by defaultDuncan Laurie
- Enable xhci_default setting in devicetree - Enable usb_xhci_on_resume setting for PEI Change-Id: I2a3965a222ce571a2ad43f568fc2d0ecb94a77bc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180673 (cherry picked from commit c5ef875f6d148964b8ad62a3fe79916c758dbc57) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6908 Tested-by: build bot (Jenkins)
2014-09-08samus: Disable SMBus controllerDuncan Laurie
Nothing is connected to this port. Change-Id: If3e466a3053fa694a511c2335c16381f77f56f47 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174089 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 5ddb6a444d5c3141868eaf618ecb014b0262a796) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6827 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-08-29samus: Add coreboot boardDuncan Laurie
Add the coreboot board files for samus - Based on Bolt - GPIO setup based on 0.91 schematic - Support both memory types - No HDA verb table for this platform - Some GPIO interrupts are shared and need to be passed to OS Change-Id: I8dbd7639456c631a0115b03a493d94b5e2361ab5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171694 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 249a74c628264e3d4ce754803ede31238404b4d5) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6775 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:17:54 +0000