Age | Commit message (Collapse) | Author |
|
Currently the rt5677 codec outputs 6MHz PDM clock which is
out-of-spec for the speaker amp SSM2537. The amp's GAIN_FS
pin is pulled down to PGND with a 47k resistor, so the
expected PDM clock is 64*FS (~3MHz) according to its datasheet.
The corresponding kernel patch that adds the PDM clock config
option is https://chromium-review.googlesource.com/#/c/230303/
BUG=chrome-os-partner:33303
BRANCH=samus
TEST=flash coreboot with this patch and see PDM CLK went
from 6MHz to 3MHz on samus with a scope.
Change-Id: Icf2c61930175bede1ee8ebc2b0fb17c2938b806c
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b9ba4597515b2fbcc72fa22e296357c454175648
Original-Change-Id: I09acdf47bab4f641981491a84197de234918435e
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230344
Original-Reviewed-by: Dylan Reid <dgreid@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9277
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This value apparently changed to 0x27 in the hardware but was
never adjusted in firmware.
BUG=chrome-os-partner:33790
BRANCH=samus
TEST=build and boot on samus
Change-Id: Ib610fc6522715e3c841c337d420ec63563bec798
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e01d3b47bf49861e9d53fc8db41890fe4c91ff9b
Original-Change-Id: I10ca7b77068491e143f8bf2463b481eada910618
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230232
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9274
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With EVT2 systems GPIO9 is now used for touchpad wake.
BUG=chrome-os-partner:32232
BRANCH=samus
TEST=suspend/resume by touchpad on samus, with kernel workaround
to disable setting of T19 in atmel driver mxt_suspend()
51 | 2014-11-03 12:41:34 | ACPI Enter | S3
52 | 2014-11-03 12:41:37 | ACPI Wake | S3
53 | 2014-11-03 12:41:37 | Wake Source | GPIO | 9
Change-Id: I67c1a6591dc287fc780889950e78c731a5a65d44
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8512a6e5266edaf77d300f47bd26c501f00361d7
Original-Change-Id: I8120747986e694b64d464826f87c9afa68af157a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227157
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9271
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=Audio playback to headphone works
Change-Id: I35efa3b97abbba50cbee4c25acfaeb155fc1238f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e2c0ede19c6b700c8d0bf01ff9d3a54984c5d784
Original-Change-Id: Ib51aace52026688dc8972047e5d934c80138ff80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221294
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9269
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The codec interrupt needs to be active high because multiple
interrupt sources share this line:
1) Headphone plug detect
2) Mic present
3) Hotword detect
These interrupt sources are OR-ed together.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=Jack detection works on samus
Change-Id: If35fe8493ab30d878d9fac2251acee62c776b0eb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 348608fe61f7848db2bfd22502a0c259d24f8980
Original-Change-Id: Ief0a291d9455f2d03789198153781ff8133aa1ce
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220588
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9268
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
GPIO IRQ support has been added in upstream rt5677 driver,
with new jack detect platform config options.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=headphone and mic detect works on Samus
Change-Id: I68a675ccd1fec3e5329d57aadad3229053092026
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4b90fa2f557f603661e25c9e1b4712eea15c8502
Original-Change-Id: I379087b8acdb13e65776a18c9ee3a58d4cb4e73c
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224513
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9266
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This matches the label exported by the GPIO controller in the
kernel and allows more speicific matches if there are other
devices that also export GPIOs.
BUG=chrome-os-partner:33098
BRANCH=samus
TEST=crossystem wpsw_cur returns 1
Change-Id: I96f8d0f7f9fd584be4a6f14d13e04db0a88951a8
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 736679136a0a72874304eaeae1ac58633cd2ce14
Original-Change-Id: I655549d0f0eca341581bfbf845162d8b9f5e993d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224136
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9265
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is the specific codec setup platform data for samus.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=emerge-samus coreboot
Change-Id: I00d4a2f73810f5f7bad49922321fb1c340289770
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 813c45bc3fdd7a2fb84df0e24bd470003bf4eafa
Original-Change-Id: I5e2a8fad58bb8a3d02ccece0b1f6fe52f56c94ea
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221539
Original-Reviewed-by: Ben Zhang <benzh@chromium.org>
Reviewed-on: http://review.coreboot.org/9261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The codec interrupt needs to come from codec GPIO1, so use the
HOTWORD_DET GPIO as the codec IRQ and the DSP_INT as the wake.The
This means codec interrupt is GPIO46 which is PIRQO and should be
interrupt 30.
Also add GPIO defines for the GPIOs attached to the codec itself.
These are defined by index, and I used the same "jack detect" and
"mic present" indices that were used in baytrail.
The codec interrupt to the host is added at index 2 and the
hostword detect interrupt to the host is added at index 3.
These can be changed as we work through the implementation in the
kernel driver.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=build and boot on samus
Change-Id: Id9cb083ddf9df161be314da4148740ed9f4d0fe6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3958efb28813c664a8a4219f78bdd0fcfe75c706
Original-Change-Id: I1c1ac1b6095fab7e3f4412555db4f9a9138e528b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220326
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9216
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move _PRW to the ACPI devices for the touchpad and touchscreen.
Add a _DSW method, but disable it by default for now until a
spurious wake issue can be resolved.
BUG=chrome-os-partner:32232
BRANCH=samus
TEST=build and boot on samus, ensure trackpad does not
spuriously wake the system.
Change-Id: I3160248ef6dfeccdec765553643d9b8de2bb2ed1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 85d14842aefdb29c750009c0092f055587172dac
Original-Change-Id: Ic4763f2cb5f3a59d04b236cee94906025661c615
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220325
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9214
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Samus has a PD MCU, and should handle PD MCU host events.
BUG=chrome-os-partner:31361
TEST=Manual on Samus. Verify that ACPI Notify routine is called when
host event is sent from EC.
BRANCH=None.
Original-Change-Id: Id40ebd438b3dd60cefc7650f2edc695c589343e9
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214860
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit d0752be013f66313d4218338e62372d0f5975097)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I08eb51eceeb7d2835d55e7e861126b137de72bf6
Reviewed-on: http://review.coreboot.org/8969
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
- Remove NFC GPIOs
- Change EC wake to GPIO27
- Enable wake on HOTWORD_DET_L_3V3
- Add new Hynix memory SKU
BUG=chrome-os-partner:31549
BRANCH=none
TEST=emerge-samus coreboot, cannot fully test until EVT
Original-Change-Id: Ia25fc39f0b67c53305b3fd9150117d6a7867eb3a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213796
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 740ac0bb7eaa9ae35fce8a04825f9c5ecf7cab79)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2b1c194eae2ebc53291f078c00ba04f82e10b0c1
Reviewed-on: http://review.coreboot.org/8963
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Instead of providing a local copy use the chipset provided one.
BUG=chrome-os-partner:28234
BRANCH=none
TEST=build and boot on samus
Original-Change-Id: I60dd9bbeefbf4298511abec54635c515fc9b1621
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9dc8e7ae61f0337aa145b7d99acc23852d1cfc9a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I259be321e01e2047666b4be106dea59a5578d9d3
Reviewed-on: http://review.coreboot.org/8962
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Add ACPI device for WLAN and enable GPIO 10 as wake
source in _PRW.
BUG=chrome-os-partner:28234,chrome-os-partner:30671
BRANCH=None
TEST=boot on samus, check for WLAN in /proc/acpi/wakeup
Original-Change-Id: I09b6eeae5bd88ee9d7e0b7e735ed871e8ae6963a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211820
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c65ce028e64aebffb99648b2c34c4ff0e7c4e70f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If192564ddd10c7fe758a4d7266394a30e7d966d4
Reviewed-on: http://review.coreboot.org/8953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Fix up commit 00aedc5e (samus: add acpi resource for supporting RT5677
codec).
Change-Id: I98b8c6f1a46f9f3bfd79da92bb070cebe8f20dc0
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8234
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Turn on keyboard backlight early in boot (not resume) path
as a sign of life for the system
- Add ACPI device for keyboard backlight so the kernel can find
and make use of it
BUG=chrome-os-partner:30586
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: Iecaef0ec5c814774e19d7c4a14cb92dc236cfee3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208152
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e166f76f9bd167468c7637dcce2b9eabf7dce8f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I47927d97c1586ec09310d014d8fba7d7a3d773c4
Reviewed-on: http://review.coreboot.org/8213
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Add codec acpi resource for supporting RT5667 codec.
BUG=chrome-os-partner:29649
TEST=emerge-coreboot successfully
checked codec device is probed
Original-Change-Id: I739c0dbfdbfa221b06f99c3d934825b640096c6b
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/207707
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit f9698c45a47efe7fd2a1f5432640f3db5e4bd3f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib14b27421613d747e02037ecd2311d9966a5d813
Reviewed-on: http://review.coreboot.org/8212
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
- SPD GPIO table was changed from earlier builds and GPIO67 needs to be
swapped with GPIO69
- Hynix 8GB DRAM is actually x16 and needs updated geometry in the SPD
- Broadwell LPDDR3 at 1333 is not working in P2, remove the workaround
- In order to support both P2A and P2B with one firmware image we need
to read the EC board version and use the right SPD GPIO for bit3
- Touchpad I2C address changed to 0x4a/0x26
BUG=chrome-os-partner:29502
BRANCH=None
TEST=boot on P2A and P2B boards
Original-Change-Id: I4af4161449d904b8dd69c1c4f984b2f41f0dbbbc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204818
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9cc71b68be556dab154fdf3f86914129e5f7a6dc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic5ca71dbfd9b9d413b86b2ae2786f39fd78ace1d
Reviewed-on: http://review.coreboot.org/8135
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable the ACPI Device for the EC ALS.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: I9e957464f835d5bd96d4806f896ac60db9dea5dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203744
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a4f78b0b78c53bc0397d9a21dd8f3fa040f41616)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib83d6211d323770c9498180a7721d45e4aefca9d
Reviewed-on: http://review.coreboot.org/8133
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Update GPIO map
- Update SPD for new memory and 4-bit table decode
- Enable USB3 port 3 and 4 (shared with PCIe port 1)
- Enable PCIe port 3 and disable port 1
- Enable SerialIO ACPI mode for devices
- Disable S0ix for now to prevent use of C10
- Special handling for memory with broadwell CPU
BUG=chrome-os-partner:28234
TEST=Boot on P1.9
Original-Change-Id: If6adcc2ea76f1af7613b715133483d7661e94dd8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201083
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 35835eaed3e098597e46f602fbd646cfbb899355)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icb03808da6d92705bbc411d155c25de57c4409c6
Reviewed-on: http://review.coreboot.org/8007
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Combine four patches dependencies. These will not build
individually, so combine them for coreboot.org upstream.
samus: Move SPD handling to separate file
The code to find the SPD data for the mainboard based on GPIOs
is moved from romstage.c into spd.c.
It relies on the updated pei_data structure from broadwell instead
of the haswell interface.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Move PEI data structure init to separate file
This needs to be executed in both romstage and ramstage
for the different PEI binary stages.
It uses the broadwell interface now instead of haswell.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199921
(cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Convert mainboard to use soc/intel/broadwell
Switch from the haswell cpu/northbridge/southbridge interface
to the soc/intel/broadwell interface.
- Use new headers where appropriate
- Remove code that is now done by the SOC generic code
- Update GPIO map to drop LP specific handling
- Update INT15 handlers, drop all but the boot display hook
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199923
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199922
(cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
samus: Add some code to print basic info from SPD
The handling of LPDDR is a bit messy in Intel platforms. There
is no traditional SPD so instead one is created by hand from the
provided datasheets.
These have varying (and sometimes unexpected) geometry and it can
be important during bringup to know what configuration is being
passed to the memory training code.
This could in theory be put in a more generic location, but for now
this is the only board with LPDDR3 where I have found it valuable.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus, look for SPD details on the console.
CQ-DEPEND=CL:199920
CQ-DEPEND=CL:199921
CQ-DEPEND=CL:199922
CQ-DEPEND=CL:199943
CQ-DEPEND=CL:*163751
Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/199923
(cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d
Reviewed-on: http://review.coreboot.org/7943
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
- GPIO29 is no longer connected so we don't need the SMI workaround
on the entry to sleep states.
- Disable touchscreen wake source until the kernel driver is working
so it does not wake immediately.
- Update a few GPIOs and disable the codec for now as it is leaking
into the 1.8V DDR rail.
Change-Id: Ia67b17eb4a097627befd8f39aadc939da1bf3d40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174122
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0fdc9a83a434378499f825d072ce0adba5ffda59)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ia835f16b156949f1841210c4a469223d5df28a54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174087
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 8e51d1d74cdcadde9cbf10e8321d601b099c46bc)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the coreboot board files for samus
- Based on Bolt
- GPIO setup based on 0.91 schematic
- Support both memory types
- No HDA verb table for this platform
- Some GPIO interrupts are shared and need to be passed to OS
Change-Id: I8dbd7639456c631a0115b03a493d94b5e2361ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 249a74c628264e3d4ce754803ede31238404b4d5)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6775
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|