summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rush_ryu
AgeCommit message (Expand)Author
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
2016-04-13mainboard/google: Update license headersMartin Roth
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
2016-03-25google/intel mainboards: Add missing board_info.txt filesMartin Roth
2016-02-12tegra132/210: Remove memlayout_vboot2.ldJulius Werner
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
2015-11-07arm64: Remove cpu intialization through device-treeFurquan Shaikh
2015-11-07arm64: remove spin table supportAaron Durbin
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-09-04bootmode: add display_init_required()Aaron Durbin
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
2015-08-26Google Kconfig: Add MAINBOARD_HAS_NATIVE_VGA_INIT in good placesMartin Roth
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
2015-05-19arm64: Reorganize payload entry code and related KconfigsJulius Werner
2015-04-28boards: remove VBOOT_(REFCODE|RAMSTAGE|ROMSTAGE)_INDEXAaron Durbin
2015-04-28chromeos: remove VBOOT2_VERIFY_FIRMWARE optionAaron Durbin
2015-04-22mainboards: Add CHROMEOS_VBNV_* where appropriatePatrick Georgi
2015-04-22google/*: Add MAINBOARD_HAS_CHROMEOS where appropriatePatrick Georgi
2015-04-22switch mainboards over to use BOARD_ID_AUTOStefan Reinauer
2015-04-22google/rush_ryu: add serialno from vpdStephen Barber
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
2015-04-17ryu: Add support for EVT board with ID BASE3(1,1)Furquan Shaikh
2015-04-17ryu: add support for p4 boardsDavid Riley
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
2015-04-10tegra132: Make non-vboot2 memlayout more usefulFurquan Shaikh
2015-04-10google/rush_ryu: Add speaker amp config for AD4567 on P0/P1Tom Warren
2015-04-10google/rush_ryu: Remove long delay when turning on AVDD_DSI_CSIJimmy Zhang
2015-04-10google/rush_ryu: audio: Setup clocks for AHUB, I2S1, codec, etc.Tom Warren
2015-04-10google/rush_ryu: devicetree: Add framebuffer resolution settingsJimmy Zhang
2015-04-10tegra132: Pass panel spec to lib_sysinfoJimmy Zhang
2015-04-10google/rush_ryu: devicetree: Add dsi panel mode settingsJimmy Zhang
2015-04-10google/rush_ryu: dsi: Enable panel related vdd and clocksJimmy Zhang
2015-04-10google/rush_ryu: Disable EC SW sync for proto boards before proto3Furquan Shaikh
2015-04-10google/rush_ryu: Add support for event logFurquan Shaikh
2015-04-10ryu: Enhance pmic access functionsJimmy Zhang
2015-04-10ryu: audio: Enable RT5677 audio codecTom Warren
2015-04-10ryu: Select pwr btn polarity based on board idFurquan Shaikh
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10ryu: update board id definitionsAaron Durbin
2015-04-10ryu: remove board id normalizationAaron Durbin
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-08ryu: Add vboot2 supportFurquan Shaikh
2015-04-08t132: Add vboot2 supportFurquan Shaikh
2015-04-08tegra132: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-03-28ryu: Add padconfigs for volup and voldown buttonsFurquan Shaikh
2015-03-28rush: ryu: remove mainboard_add_memory_ranges()Aaron Durbin
2015-03-28tegra132/rush/ryu: Use CLK_RST_REG instead of &clk_rst->...Furquan Shaikh
2015-03-28Ryu: Move I2C6 init to ramstageTom Warren
2015-03-28Ryu: Rewrite I2C6 mux initTom Warren
2015-03-28ryu: use generic spin tableAaron Durbin
2015-03-28ryu: Get rid of coreboot setting up DMA areas for libpayloadFurquan Shaikh
2015-03-28ryu: remove bring_up_secondary_cpu from devicetreeAaron Durbin
2015-03-27ryu: add cpus to device treeAaron Durbin
2015-03-27ryu: remove call to soc_configure_i2c6pad()Aaron Durbin
2015-03-27ryu: Remove old/unused BCT cfg filesTom Warren
2015-03-27ryu: fix power button polarityAaron Durbin
2015-03-27rush: use names for gpiosAaron Durbin
2015-03-27ryu: configure plld for display usageAaron Durbin
2015-03-27ryu: bring up secondary coreAaron Durbin
2015-03-27ryu: normalize board idAaron Durbin
2015-03-27ryu: initialize LTE modemBen Chan
2015-03-27ryu: use named bus numbers instead of literalsAaron Durbin
2015-03-27ryu: Add pad/funit init for i2c6 (audio codec, etc.)Tom Warren
2015-03-26ryu: enable external usb 2.0 portAaron Durbin
2015-03-26ryu: convert hardware initialization to funit APIAaron Durbin
2015-03-26ryu: support for DMA regionAaron Durbin
2015-03-26t132: ryu: Correct how board id is retrievedJimmy Zhang
2015-03-26ryu: Update BCT to Max Frequency 924MHzJimmy Zhang
2015-03-26ryu: convert mainboard initialization to use padconfig APIAaron Durbin
2015-03-26tegra132: move common bootblock init into SoC codeAaron Durbin
2015-03-26ryu: configure EC I2C pads as open drainAaron Durbin
2015-03-26ryu: use EC proto v3 over i2cAaron Durbin
2015-03-26ryu: enable vboot firmware verificationAaron Durbin
2015-03-25tegra132: use pre-existing reset APIAaron Durbin
2015-03-25rush/ryu: restore full-speed clocks to TPM I2C and EC SPITom Warren
2015-03-25ryu: Add 4 LPDDR3 SDRAM BCTsAaron Durbin
2015-03-25ryu: Add three more full LPDDR3 SDRAM BCTsJimmy Zhang
2015-03-25ryu: switch to padconfig API in romstageAaron Durbin
2015-03-25tegra132: introduce romstage_mainboard_init()Aaron Durbin
2015-03-25ryu: Add mainboard_init_xxx functions to get it building againTom Warren
2015-03-24ryu: use padconfig API in bootblockAaron Durbin
2015-03-24tegra132: add bootblock_mainboard_early_init()Aaron Durbin
2015-03-23Enable publishing of board ID where supportedVadim Bendebury
2015-03-23Include board ID calculations only when necessaryVadim Bendebury