summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rex/variants
AgeCommit message (Expand)Author
2023-12-14mb/google/rex/var/screebo: Change GPP_B14 from UP_20K to NONEKun Liu
2023-12-12mb/google/rex/var/screebo: Increase PL1 max value from 15W to 25WKun Liu
2023-12-08mb/google/rex/var/screebo: set audio GPIO pins based on fw_configTerry Cheong
2023-12-06mb/google/rex/variants/deku: Enable CNVi PCI deviceEran Mitrani
2023-12-04mb/google/rex/var/screebo: Override power limitsSubrata Banik
2023-12-04mb/google/rex/variants/deku: Complete USB configurationEran Mitrani
2023-12-04mb/google/rex/variants/deku: Add basic DTTEran Mitrani
2023-12-04mb/google/rex/var/deku: Enable LAN0, LAN1Eran Mitrani
2023-12-04mb/google/rex/var/ovis: Add power limit support for MCH ID 0x7d14Subrata Banik
2023-12-04mb/google/rex: Simplify power limit configuration usageSubrata Banik
2023-12-02mb/google/rex: Enhance power limit override mechanismSubrata Banik
2023-11-30mb/google/rex/variants/deku: Add GPIO configurationEran Mitrani
2023-11-29mb/google/rex/var/screebo: Change GPP_B14 from NC to NFKun Liu
2023-11-27mb/google/rex/var/screebo: Enable BT audio offload configKapil Porwal
2023-11-22mb/google/rex/var/karis: Set pen detect pin to NC for non-stylus skuTyler Wang
2023-11-10mb/google/rex/var/screebo: Update DFP portzhourui
2023-11-09mb/google/rex/variants/deku: Add display configurationEran Mitrani
2023-11-08mb/google/rex: split TOUCHSCREEN_I2C_SPI definitionYH Lin
2023-11-07mb/google/rex/variants/deku: Add USB configurationEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add SSD card configEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add I2C configEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add RAM id for MT62F2G32D4DS-026Eran Mitrani
2023-11-01mb/google/rex/var/rex0: Toggle NVMe PWR pin to reset SSDWonkyu Kim
2023-11-01mb/google/rex: Avoid hang for pre-prod SoC by setting SAGV_POINTS_0_1_2Subrata Banik
2023-10-31mb/google/rex/var/screebo: Disable FVMSubrata Banik
2023-10-31mb/google/rex/var/screebo: Set Baseline Power LimitSubrata Banik
2023-10-28mb/google/rex: add dptf settings for 2+4 SOC SKUKane Chen
2023-10-28mb/google/rex/var/rex0: Configure EN_WWAN_PWR GPIO based on CBIJeremy Compostella
2023-10-28mb/google/{rex, ovis}: Introduce devicetree.cb for pre-prod SoCSubrata Banik
2023-10-25mb/google/rex: Create deku variantEran Mitrani
2023-10-23mb/google/rex/var/karis: Modify TCC_offset to 10Tyler Wang
2023-10-23mb/google/rex: Use upstream driver properties for SX9324Ivy Jian
2023-10-20mb/google/rex/var/karis: Remove I2C2 "on" settingsTyler Wang
2023-10-20mb/google/rex: Set frequency and gears for SaGv pointsBora Guvendik
2023-10-20mb/google/rex/var/karis: Use 2 gpio for stylus detect/wakeTyler Wang
2023-10-18mb/google/rex/var/karis: sync CBI FW_CONFIG definitionsYH Lin
2023-10-18mb/google/rex/var/karis: add hook for WiFi SAR tableYH Lin
2023-10-18mb/google/rex/var/karis: Add FAN field in fw_configTyler Wang
2023-10-16mb/google/rex/var/rex: Configure cpu power limits by battery statusJamie Ryu
2023-10-13mb/google/rex/variant/rex0: HID over SPI - change frequency to 30MHZEran Mitrani
2023-10-13mb/google/rex/var/rex0: Update NVM configuration for WFCJamie Ryu
2023-10-13Revert "mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hang"Wentao Qin
2023-10-12mb/google/rex/var/karis: Fix touchscreen HID to ELAN9004Tyler Wang
2023-10-11mb/google/rex/var/karis: Set touchscreen power/reset GPIOs correctlyTyler Wang
2023-10-10mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
2023-10-10mb/google/rex/var/rex0: update thermal settings to start fan earlierSumeet Pawnikar
2023-10-07mb/google/{rex,ovis}: Disable package C-state auto demotionSukumar Ghorai
2023-10-04mb/google/rex: Configure ISH UART TX/RX as NCBernardo Perez Priego
2023-10-03mb/google/rex: Fix ISH I2C pad for suspendCliff Huang
2023-09-28mb/google/rex/var/ovis: Add DPTF configurationJakub Czapiga
2023-09-26mb/google/rex/var/rex0: Configure I2C5 timingIvy Jian
2023-09-22mb/google/rex/var/rex0: Add entries for SAR Proximity SensorsSubrata Banik
2023-09-21mb/google/rex/var/karis: Enable PIXA touchpadTyler Wang
2023-09-20mb/google/rex/var/karis: Set VPU disable as defaultTyler Wang
2023-09-19mb/google/rex/var/screebo: Change GPP_C06 to NCZhongtian Wu
2023-09-16Revert "mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C"Subrata Banik
2023-09-15mb/google/rex/var/karis: Disable stylus/FP module based on fw_configTyler Wang
2023-09-15mb/google/rex/var/karis: Update fw_config settingsTyler Wang
2023-09-15mb/google/rex: add support for UWBEran Mitrani
2023-09-07mb/google/rex/var/karis: Update MIPI User facing camera settingsTyler Wang
2023-09-04mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hangWentao Qin
2023-09-02mb/google/rex/var/karis: Drop unused audio codecs and amplifiersTyler Wang
2023-09-02mb/google/rex/var/karis: Add audio codec ALC5650Tyler Wang
2023-09-02mb/google/rex/var/screebo: add hook for WiFi SAR tableYH Lin
2023-09-02mb/google/rex/var/screebo: add FP_MCU fw_configYH Lin
2023-09-02mb/google/rex/var/screebo: remove SD_ABSENTYH Lin
2023-09-02mb/google/rex/var/karis: Enable ELAN touchscreenTyler Wang
2023-08-31mb/google/rex/var/karis: Update GPIO settings for NC pinsTyler Wang
2023-08-31mb/google/rex/var/rex0: Add HDMI GPIOs to early GPIO listAnil Kumar
2023-08-31mb/google/rex: Enable Fast V-Mode for MTL-U 15WSubrata Banik
2023-08-30mb/google/rex/var/karis: Remove USB cameraTyler Wang
2023-08-30mb/google/rex/var/karis: Remove SAR sensorTyler Wang
2023-08-30mb/google/rex/var/karis: Set GPP_D04 to NCTyler Wang
2023-08-28mb/google/rex/var/rex0: Enable BT offload audio for Intel MtP2 moduleAnil Kumar
2023-08-28mb/google/rex/var/karis: Remove UWBTyler Wang
2023-08-26mb/google/rex/var/karis: memory: Add Micron MT62F512M32D2DR-031Tyler Wang
2023-08-26mb/google/rex/var/karis: Remove WWAN moduleTyler Wang
2023-08-26mb/google/rex/var/rex0: Use FW_CONFIG to select the correct SAR tableSubrata Banik
2023-08-25mb/google/rex/var/ovis: Update PWM_BUZZER GPIO configJakub Czapiga
2023-08-25mb/google/rex/var/karis: Add SOC_TCHSCR_INT settings to gpio tableTyler Wang
2023-08-25mb/google/rex/var/karis: Fix incorrect GPIO pad numbersKapil Porwal
2023-08-24mb/google/rex/var/karis: Disable GSPI0Tyler Wang
2023-08-23mb/google/rex/var/karis: Remove WWAN temperature sensorTyler Wang
2023-08-21mb/google/rex/var/karis: Remove world facing cameraTyler Wang
2023-08-18mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
2023-08-17mb/google/rex: Update ISH GPIO's configurationBernardo Perez Priego
2023-08-17mb/google/rex/var/karis: Update USB settingsTyler Wang
2023-08-17mb/google/rex/var/karis: Remove SD card and ISHTyler Wang
2023-08-17mb/google/rex/var/karis: Modify SSD settingsTyler Wang
2023-08-17mb/google/rex/var/karis: Copy devicetree from rex0Tyler Wang
2023-08-17mb/google/rex/var/karis: Copy GPIO from rex0Tyler Wang
2023-08-17mb/google/rex/var/ovis: Fix Bluetooth configurationJakub Czapiga
2023-08-08mb/google/rex/variants/ovis: Use correct device_index for RT8168Stefan Reinauer
2023-08-08mb/google/rex/var/screebo: Change sdcard clk from 7 to 6Kun Liu
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
2023-08-05mb/google/rex: enable d3hot for storage devicesSukumar Ghorai
2023-08-04mb/google/{rex,ovis}: Disable C1-state auto demotion for rex & ovisSukumar Ghorai
2023-08-04mb/google/rex/var/screebo: Add fw_config probe for GL9750 and RTS5227SKun Liu
2023-08-03mb/google: Add more comment on GFX devices for the future referenceWon Chung
2023-08-02mb/google/rex/variants/ovis: Use and configure RT8168 driverStefan Reinauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 21:54:11 +0000