| Age | Commit message (Expand) | Author |
|---|
| 2017-02-25 | mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state | Aaron Durbin |
| 2017-02-22 | acpi: Add ACPI_ prefix to IRQ enum and struct names | Furquan Shaikh |
| 2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
| 2017-02-20 | mainboard/{google,intel}: Change config option selection | Furquan Shaikh |
| 2017-02-20 | mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATOR | Furquan Shaikh |
| 2017-02-15 | mainboard/google/reef: add sand variant | YH Lin |
| 2017-02-13 | mainboard/google/snappy: Update DPTF settings | Wisley Chen |
| 2017-02-11 | mainboard/google/reef: Increase PL1 sampling period | Sumeet Pawnikar |
| 2017-02-07 | mainboards/google/reef: Add support for tablet mode switch. | Gwendal Grignou |
| 2017-02-04 | Revert "google/pyro: remove Wacom touchscreen probed flag" | Kevin Chiu |
| 2017-02-03 | mainboard/google/snappy: Set PL2 override to 15000mW | Harry Pan |
| 2017-01-31 | mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configuration | Sathyanarayana Nujella |
| 2017-01-31 | mainboard/google/reef: Set edge triggered interrupt for GPIO_22 | Vaibhav Shankar |
| 2017-01-29 | mainboard/google/snappy: Update WDT touchscreen device | Furquan Shaikh |
| 2017-01-29 | mainboard/google/pryo: Update touchscreen device ACPI nodes | Furquan Shaikh |
| 2017-01-29 | i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI | Furquan Shaikh |
| 2017-01-29 | mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOs | Vaibhav Shankar |
| 2017-01-26 | google/pyro: Add USB2 phy setting override | Kevin Chiu |
| 2017-01-26 | google/pyro: Disable Wacom touchscreen probed | Kevin Chiu |
| 2017-01-25 | google/pyro: Modify Wacom touchscreen IRQ type to level-triggered | Kevin Chiu |
| 2017-01-23 | google/pyro: Update DPTF settings | Kevin Chiu |
| 2017-01-22 | mainboard/google/reef: Increase TSR1 trigger point | Tim Chen |
| 2017-01-21 | mainboard/google/reef: remove internal pullups on PP1800_S rail | Aaron Durbin |
| 2017-01-20 | google/snappy: Add weida touchscreen support | Wisley Chen |
| 2017-01-20 | google/snappy: Use exported GPIOs and ACPI regulator for touchscreen | Wisley Chen |
| 2017-01-19 | mainboard/google/snappy: Disable unused devices | Wisley Chen |
| 2017-01-19 | mainboard/google/reef: Ignore Audio DMIC IOSSTATE | Vaibhav Shankar |
| 2017-01-17 | Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen" | Martin Roth |
| 2017-01-17 | mainboard/google/reef: Ignore SPI IOSTANDBY | Lijian Zhao |
| 2017-01-17 | mainboard/google/snappy: Add PowerResource for ELAN touchscreen | Wisley Chen |
| 2017-01-13 | google/pyro: Add ELAN touch screen support | Kevin Chiu |
| 2017-01-03 | google/snappy: Update DPTF settings | Wisley Chen |
| 2017-01-03 | mainboard/google/reef: Update DPTF parameters EVT1_v0.3 | Tim Chen |
| 2016-12-17 | google/reef: Use exported GPIOs and ACPI regulator for touchscreen | Furquan Shaikh |
| 2016-12-16 | drivers/i2c/generic: Allow mainboards to export reset and enable GPIOs | Furquan Shaikh |
| 2016-12-15 | mainboard/google/reef: clear normal MRC cache on recovery retrain | Aaron Durbin |
| 2016-12-15 | google/reef: Remove VARIANT_DIR definition | Martin Roth |
| 2016-12-13 | mainboard/google/reef: implement phase enforcement pin | Aaron Durbin |
| 2016-12-12 | google/pyro: Set PL2 override to 15000mW | Kevin Chiu |
| 2016-12-09 | mainboard/google/reef: fill in NHLT ACPI OEM header fields | Aaron Durbin |
| 2016-12-09 | mainboard/google/reef: add board SKU'ing support | Aaron Durbin |
| 2016-12-08 | mainboard/google/reef: Set PL2 override to 15000mW | Sumeet Pawnikar |
| 2016-12-07 | mainboard/google/reef: adjust chromeos.fmd regions | Aaron Durbin |
| 2016-12-02 | google/pyro: set i2c bus timings by rise/fall times | Kevin Chiu |
| 2016-12-02 | mainboard/google/reef: Add all DMIC endpoints | Sathyanarayana Nujella |
| 2016-12-01 | mainboard/google/reef: allow variants to modify nhlt oem revision | Aaron Durbin |
| 2016-12-01 | lib/nhlt: add support for setting the oem_revision | Aaron Durbin |
| 2016-11-30 | mainboard/google/snappy: Tune i2c frequency to 400 Khz | Wisley Chen |
| 2016-11-30 | mainboard/reef: Add RW_VAR_MRC_CACHE | Andrey Petrov |
| 2016-11-29 | google/pyro: disable unused devices | Kevin Chiu |
| 2016-11-29 | mainboard/google/snappy: Add digitizer device to devicetree | Wisley Chen |
| 2016-11-29 | mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95C | Sumeet Pawnikar |
| 2016-11-28 | mainboard/google/reef: Set PL1 MAX power limit value to 12W | Tim Chen |
| 2016-11-23 | google/pyro: Update DPTF settings | Kevin Chiu |
| 2016-11-20 | mainboard/google/reef: Update DPTF parameters provided from thermal team | Tim Chen |
| 2016-11-18 | google/chromeec: Add common infrastructure for boot-mode switches | Furquan Shaikh |
| 2016-11-17 | google/snappy: Update DPTF settings | Wisley Chen |
| 2016-11-17 | mainboard/google/reef: disable unused devices | Jagadish Krishnamoorthy |
| 2016-11-17 | mainboard/google/reef: set i2c bus timings by rise/fall times | Aaron Durbin |
| 2016-11-16 | mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pin | Sathyanarayana Nujella |
| 2016-11-11 | mainboard/google/snappy: Configure PERST pin | Wisley Chen |
| 2016-11-11 | google/snappy: update timing of sdmode toggling | Wisley Chen |
| 2016-11-11 | mainboard/google/snappy: Set PL1 override to 12000mW | Wisley Chen |
| 2016-11-10 | mainboard/google/reef: Add digitizer device to devicetree | Furquan Shaikh |
| 2016-11-10 | mainboard/google/reef: Tune digitizer I2C frequency to 400kHz | Furquan Shaikh |
| 2016-11-10 | drivers/i2c/wacom: Make the driver more generic | Furquan Shaikh |
| 2016-11-10 | mainboard/google/pyro: Set PL1 override to 12000mW | Kevin Chiu |
| 2016-11-10 | google/pyro: Tune i2c frequency to 400 Khz | Kevin Chiu |
| 2016-11-10 | google/pyro: update timing of sdmode toggling | Kevin Chiu |
| 2016-11-10 | mainboard/google/pyro: Configure PERST pin | Kevin Chiu |
| 2016-11-10 | mainboard/google/reef: Add support for RECOVERY_MRC_CACHE | Furquan Shaikh |
| 2016-11-09 | mainboard/google/reef: use common google smbios mainboard version | Aaron Durbin |
| 2016-11-09 | google/pyro: Update WACOM touchscreen ACPI _HID | Janice Li |
| 2016-11-07 | mainboard/google/reef: update DMIC related pins configuration | Sathyanarayana Nujella |
| 2016-11-04 | reef: tune trackpad i2c frequency to 400kHz | Aaron Durbin |
| 2016-11-04 | reef: tune tpm i2c frequency to 400kHz | Aaron Durbin |
| 2016-10-28 | mainboard/google/reef: allow variants to override NHLT OEM strings | Aaron Durbin |
| 2016-10-28 | mainboard/google/reef: update comment for DMIC config usage | Aaron Durbin |
| 2016-10-27 | mainboard/google/reef: drop disabling periodic training for micron | Aaron Durbin |
| 2016-10-27 | mainboard/google/reef: clarify memory part number details | Aaron Durbin |
| 2016-10-26 | google/reef/variants/pyro: Use WCOM Touchscreen driver | Furquan Shaikh |
| 2016-10-25 | mainboard/google/reef: Add PowerResource for ELAN touchscreen | Furquan Shaikh |
| 2016-10-20 | mainboard/google/reef: add snappy variant | Wisley Chen |
| 2016-10-18 | mainboard/google/reef: Configure PERST pin for reef DVT | Vaibhav Shankar |
| 2016-10-16 | mainboard/google/reef: Set PL1 override to 12000mW | Venkateswarlu Vinjamuri |
| 2016-10-10 | google/reef: update timing of sdmode toggling | Sathyanarayana Nujella |
| 2016-10-07 | google/reef/variants/pyro: Add support for GPIO output polarity | Martin Roth |
| 2016-10-07 | x86/acpi_device: Add support for GPIO output polarity | Furquan Shaikh |
| 2016-10-07 | mainboard/google/reef: add pyro variant. | Kevin Chiu |
| 2016-10-01 | mainboard/google/reef: Update DPTF policy temp. values for CPU | Sumeet Pawnikar |
| 2016-10-01 | mainboard/google/reef: unconditionally set MAINBOARD_FAMILY | Aaron Durbin |
| 2016-09-30 | google/reef: Fix default values in Kconfig | Martin Roth |
| 2016-09-28 | google/reef: Mark touchpad and touchscreen as probed devices | Duncan Laurie |
| 2016-09-26 | mainboards,ec: provide common declaration for mainboard_ec_init() | Aaron Durbin |
| 2016-09-26 | mainboards/google/reef: use chromeec's ASL lid switch implementation | Aaron Durbin |
| 2016-09-26 | soc/intel/apollolake: provide power button ACPI device | Aaron Durbin |
| 2016-09-21 | mainboard/google/reef: Enable cr50 TPM interrupt | Duncan Laurie |
| 2016-09-19 | Revert "mainboard/google/reef: Enable cr50 TPM interrupt" | Duncan Laurie |
| 2016-09-19 | mainboard/google/reef: Enable cr50 TPM interrupt | Duncan Laurie |
| 2016-09-19 | mainboard/google/reef: Configure WLAN as wake source | Vaibhav Shankar |
